obtained from o2micro. These should only be needed for 'older'
o2micro bridges (anything before the 7xxx series of bridges), but will
work with the new bridges.
# I don't plan on porting it to oldcard, but will happily commit to
# oldcard if someone else needs them.
Add sysctl's to display statistics/debug_info
Set WAIT_FOR_AUTONEG_DEFAULT to zero by default
Increment packet in/out statistics inline instead of every two seconds.
MFC after: 3 days
attribute name of "" from ffs_getextattr(). Invoking VOP_GETETATTR()
with an empty name is now no longer supported; user application
compatibility is provided by a system call level compatibility
wrapper. We make sure to explicitly reject attempts to set an EA
with the name "".
Obtained from: TrustedBSD Project
Sponsored by: DARPA, Network Associates Laboratories
"", temporarily map it to a call to extattr_list_vp() to provide
compatibility for older applications using the "" API to retrieve
EA lists.
Use VOP_LISTEXTATTR() to support extattr_list_vp() rather than
VOP_GETEXTATTR(..., "", ...).
Obtained from: TrustedBSD Project
Sponsored by: DARPA, Network Asssociates Laboratories
specific attribute name. It will have the same semantics as the
older vop_getextattr() "retrieve the names" hack, returning
a buffer with ASCII nul-seperated names.
Obtained from: TrustedBSD Project
Sponsored by: DARPA, Network Associates Laboratories
extended attribute retrieval code: it's no longer special-cased,
and is caught by the normal UFS1 EA validity checks (and, in
fact, returns the same error, EINVAL).
Obtained from: TrustedBSD Project
Sponsored by: DARPA, Network Associates Laboratories
we were passing in a void* representing the PCB of the parent thread.
Now we pass a pointer to the parent thread itself.
The prime reason for this change is to allow cpu_set_upcall() to copy
(parts of) the trapframe instead of having it done in MI code in each
caller of cpu_set_upcall(). Copying the trapframe cannot always be
done with a simply bcopy() or may not always be optimal that way. On
ia64 specifically the trapframe contains information that is specific
to an entry into the kernel and can only be used by the corresponding
exit from the kernel. A trapframe copied verbatim from another frame
is in most cases useless without some additional normalization.
Note that this change removes the assignment to td->td_frame in some
implementations of cpu_set_upcall(). The assignment is redundant.
A previous call to cpu_thread_setup() already did the exact same
assignment. An added benefit of removing the redundant assignment is
that we can now change td_pcb without nasty side-effects.
This change officially marks the ability on ia64 for 1:1 threading.
Not tested on: amd64, powerpc
Compile & boot tested on: alpha, sparc64
Functionally tested on: i386, ia64
got fixed two weeks after the ia64 version was copied from the alpha
version (see rev 1.32 of sys/alpha/alpha/mem.c). As such, we were
missing the same continue as on alpha.
While here, add a default case for the device minor switch and do
some general style(9) cleanups.
WARNING: this file still has bugs. When reading from region 6 or
region 7, we don't validate the physical address. One can trivially
cause a machine check by trying to read from address 0xFFFFFFFFFFFFFFF0
or something that uses the unimplemented physical address bits.
Reported by: Alan Robinson <alan.robinson@fujitsu-siemens.com>
we were passing in a void* representing the PCB of the parent thread.
Now we pass a pointer to the parent thread itself.
The prime reason for this change is to allow cpu_set_upcall() to copy
(parts of) the trapframe instead of having it done in MI code in each
caller of cpu_set_upcall(). Copying the trapframe cannot always be
done with a simply bcopy() or may not always be optimal that way. On
ia64 specifically the trapframe contains information that is specific
to an entry into the kernel and can only be used by the corresponding
exit from the kernel. A trapframe copied verbatim from another frame
is in most cases useless without some additional normalization.
Note that this change removes the assignment to td->td_frame in some
implementations of cpu_set_upcall(). The assignment is redundant.
A previous call to cpu_thread_setup() already did the exact same
assignment. An added benefit of removing the redundant assignment is
that we can now change td_pcb without nasty side-effects.
This change officially marks the ability on ia64 for 1:1 threading.
Not tested on: amd64, powerpc
Compile & boot tested on: alpha, sparc64
Functionally tested on: i386, ia64
Always route PCI interrupts on i386 UP machines. I was planning to enable
this for i386 anyways once SMP support is done. Having this enabled fixes
problems on many people's laptops.
Requested by: imp
Attach to the component devices using GEOM semantics.
Create a GEOM provider instead of using disk_create()
Use the GEOM OAM api for configuration.
I saw approx ~1% speedup in througput and ~7% in latency in a
simple minded test of a two-disk striped device.
This file was repo-copied from src/sys/dev/ccd/ccd.c.
This is not yet linked into the build.
While a string is readable without a tool, an array is easier to process for
a monitoring application. This also prevents the extra hoops we need with
sbufs and locking.
Move the mtx_init() in en_attach() higher before the first failure point so
that we can unconditionally destroy it in en_destroy().
extattr_list_link() system calls, which return a least of extended
attributes defined for a vnode referenced by a file descriptor
or path name. Currently, we just invoke VOP_GETEXTATTR() since
it will convert a request for an empty name into a query for a
name list, which was the old (more hackish) API. At some point
in the near future, we'll push the distinction between get and
list down to the vnode operation layer, but this provides access
to the new API for applications in the short term.
Pointed out by: Dominic Giampaolo <dbg@apple.com>
Obtained from: TrustedBSD Project
Sponsored by: DARPA, Network Associates Laboratories
file/directory/link, rather than using a less explicit hack on
the extattr retrieval API:
extattr_list_fd()
extattr_list_file()
extattr_list_link()
The existing API was counter-intuitive, and poorly documented.
The prototypes for these system calls are identical to
extattr_get_*(), but without a specific attribute name to
leave NULL.
Pointed out by: Dominic Giampaolo <dbg@apple.com>
Obtained from: TrustedBSD Project
Sponsored by: DARPA, Network Associates Laboratories
Don't copyin() data we are about to overwrite.
Add a flag to tell userland that KSE is officially "DONE" with the
mailbox and has gone away.
Obtained from: davidxu@
we failed to put the bucket back into the general cache/container.
Also, fix a bad assumption. There was a KASSERT() that aimed to
guarantee that whenever the pcpu container's mc_starved was > 0,
that whatever the bucket we were freeing to was an empty bucket,
assuming it belonged to the pcpu container cache. However, there
is at least one case where this is not true anymore; consider:
1) All containers empty, next thread to try to alloc will touch
a pcpu container, notice it's empty, and increment the pcpu
container's mc_starved.
2) Some other thread frees an mbuf belonging to a bucket in
the general cache/container. Then it frees another mbuf
belonging to the same bucket (still in gen container).
3) Some third thread tries to allocate an mbuf from the pcpu
container and, since empty, grabs one mbuf now available
in the general cache and moves the non-empty bucket from
which it took 1 mbuf and to which the thread in (2) freed
to, and moves it to the pcpu container.
4) A final thread tries to free an mbuf belonging to the
NON-EMPTY bucket mentionned in (2) and (3) and, since
the pcpu container's mc_starved is > 0, but the bucket
is obviously non-empty, it trips on the KASSERT.
This meant that one could potentially get a panic in some
cases when out of mbufs and clusters. The problem could
be mitigated by commenting out some cv_signal() calls,
but I'm assuming that was pure coincidence and this is
the correct fix.
on my part. The output asm looks correct with the previous commit in place
and it works on amd64, but on my laptop I got a spew of AE_BAD_PARAMETER
errors trying to unlock the acpi global lock.
and releasing ACPI global locks instead of (ab)using the pointers to those
locks as the constants. Also, rather than require that the address of
the lock be stored in a register, use a memory constraint allowing the
memory address to be used directly.
Noticed by: peter
- Use a hash of umtx queues to queue blocked threads. We hash on pid and the
virtual address of the umtx structure. This eliminates cases where we
previously held a lock across a casuptr call.
Reviwed by: jhb (quickly)
to unload. This would cause a panic on the second resetconfig.
Start Vinum at boot time at SI_SUB_RAID, not SI_SUB_VINUM.
SI_SUB_VINUM was there first, but there's no real distinction, and
SI_SUB_RAID is a more neutral name.
Submitted by: hmp
o adding locking to op submission
o mark interrupt handler MPSAFE
o don't use locking on detach; disabling interrupts should be sufficient
o change mutex string names so witness printouts are more meaningful
Note: locking is still pretty brute-force but it's probably not worth
improving it given the relatively low performance of hifn-based cards.
o replace driver-global lock with three locks: one for the handling of mcr1
operations, one for handling of mcr2 operations, and one for the mcr1
free list
o mark the interrupt handler MPSAFE
o don't use locking on detach; disabling interrupts is sufficient (I think)
o add a ``done'' flag for crypto operations; this is set when the operation
completes and is intended for callers to check operations that may complete
``prematurely'' because of direct callbacks
o close a race for operations where the crypto driver returns ERESTART: we
need to hold the q lock to insure the blocked state for the driver and any
driver-private state is consistent; otherwise drivers may take an interrupt
and notify the crypto subsystem that it can unblock the driver but operations
will be left queued and never be processed
o close a race in /dev/crypto where operations can complete before the caller
can sleep waiting for the callback: use a per-session mutex and the new done
flag to handle this
o correct crypto_dispatch's handling of operations where the driver returns
ERESTART: the return value must be zero and not ERESTART, otherwise the
caller may free the crypto request despite it being queued for later handling
(this typically results in a later panic)
o change crypto mutex ``names'' so witness printouts and the like are more
meaningful
all the argument registers etc since we have almost certainly have trashed
them by now. Take particular car of %r10 since it held the original value
of %rcx (which we saved in tf_rcx on entry and doreti doesn't know this).
Change the list interface to simplify things.
Remove old list ioctls which bogusly exported the softc to userland.
Move the softc and associated structures from the public header to
the source file.
Make CCD a GEOM class.
For now only use this for implementing a OAM config method which
can return a list of configured CCD devices in the format which
"ccdconfig -g[v]" would normally output.
mpo_copy_mbuf_label() entry point for Biba and MLS, respectively.
Otherwise, labels in m_tags may not be properly propagated across
some classes of mbuf operations. This problem caused these policies
to fail-stop the system with a panic.
Obtained from: TrustedBSD Project
Sponsored by: DARPA, Network Associates Laboratories
Two tokens that don't together form a vaid preprocssor token cannot be
pasted together using ANSI-C token concatinatation. GCC 3.2's cpp, at least,
produces the desired result w/o using "##".
Clarify that the implicit fallthrough was *not* intentional (thanks, Poul!)
and reorganize the code so a correct fallthrough (with /* FALLTHROUGH */)
occurs.
o Use pcb and tf for the new pcb and the new trapframe and use pcb0
for the old (current) pcb. The mix of pcb, pcb2 and tf was slightly
confusing.
o Don't define td->td_frame here. It has already been set previously
by cpu_thread_setup. Add a KASSERT to make sure pcb and tf are both
non-NULL.
o Make sure the number of dirty registers is 0 for the new thread.
There are no user registers on the backing store because we heven't
enter userland yet.
is not called, and no static rules match an outgoing packet, the
latter retains its source IP address. This is in support of the
"static NAT only" mode.
bzero(ptr, sizeof(DC_RXLEN * 5));
which should obviously be:
bzero(ptr, DC_RXLEN * 5);
Looks like this bug may have reduced the effectiveness of the
workaround for the hardware bug in the PNIC chips.
MFC after: 1 week
