Now libutil depends on libc.so.4, so needs to update the major version.
Without this, old binaries which use libutil and build with libc.so.3
will coredump on recent 4.0.
Solicited comment for cvs-committers and there seems to be no objection.
Approved by: jkh
might it confuse people, but it causes a warning message with
nroff, and no version history mentions a 1.2 version of FreeBSD.
If anything, a ``HISTORY'' section should show which version this
appeared in.
- Remove all the code intended to deal with experimental
C1010 revisions. This code got useless due to commercial
chip revisions having been fixed.
Fixes:
- Rewrite/rework the WSR condition handling.
Previous drivers snooped on the BUS through the SBDL IO
register and this has been discovered to trigger a spurious
SCSI parity error when WSR had been set by chip and cleared
by SCRIPTS prior to reading SBDL bit [0...7].
On the other hand, the C1010 does not use the SWIDE register
when synchronous data transfers are taking place and
requires a CHMOV (1) WHEN DATA_IN to be performed in order
to move to memory the residual byte when WSR is set and
the residual byte is useful data.
BTW, the new WSR handling by the driver is simpler.
- No longer attempt to read from SCRIPTS the SBDL register.
This is intended to avoid to be victimized again by any other
issue regarding the handling of this register by 8xx chips.
Miscellaneous:
- The driver is now able to handle the WSR + IGN RESIDUE
condition at the end of a DATA IN I/O without need of a
programmed interrupt. It is a minor? optimization.
- A few other minor cosmetic changes.
This driver version fixes notably a permanent SCSI parity
error condition at boot that can be triggerred due to recent
changes in cam_xpt.c between 1.79 and 1.80.
Changes in CAM/XPT are fine, but the new handling of the full
INQUIRY may trigger the driver problem when a target returned
an odd value in the `additionnal length' field of the INQUIRY
response.
The diff against previous driver version is large, but it
consists approximatively in:
- 350 lignes removed and not compiled in previous drivers
(They addressed experimental C1010 revisions)
- 250 lignes added or changed, half being comments or empty
lines.
So, in fact, the real changes are about 120 lines of source.
About 80 lines address SCRIPTS changes and about 40 lines
address C code changes.
Approved by: jkh
New WSR handling reviewed by Pamela Delaney <pam.delaney@lsil.com>
(For back-porting to Linux sym53c8xx driver 1.6x series)
Now libwrap depends on libc.so.4, so needs to update the major version.
Without this, old binaries which use libwrap and build with libc.so.3
will coredump on recent 4.0.
Approved by: jkh
Reviewed by: markm
S/Key authentication for ftpd was not working due to ftp implementation and
/etc/pam.conf missmatch.
So add ftpd entries into /etc/pam.conf.
Reported by: "Jose M. Alcaide" <jose@we.lc.ehu.es>
Approved by: jkh
Reviewed by: markm
-"ftp hostname:/path" was not working.
- IPv6 raw addr specification was not well supported, such as,
"ftp http://\[1:2:3:4:5:6:7:8:\]/index.html"
Approved by: jkh
``jail'', and move the set_hostname_allowed sysctl there, as well as
fixing a bug in the sysctl that resulted in jails being over-limited
(preventing them from reading as well as writing the hostname). Also,
correct some formatting issues, courtesy bde :-).
Reviewed by: phk
Approved by: jkh
'S' status call- this was the size of the original mtget structure. Don't
bother to map the current mtget structure to an old one- for version 0
RMT it's meaningless because it's all binary data anyway, and it's only the
wierd edge case of Solaris 7 starting to use the 'S' status call that has
tickled this issue- and this MNC fixes that issue.
We need to implement Version 1 RMT anyway.
Approved: jkh@freebsd.org
PR: 14946
for 1020/1X80/12160/2X00- for readability. Add in 12160 (Ultra3)
support- but not with PPR just yet. Fix and clarify fetching of
return parameter for getting firmware rev which for the 2200 contains
the connection topology (Private Loop (NL-port), N-port, FL-port,
F-port). Synthesize the connection topology for the 2100 which can
only be Private Loop or FL-port. Handle a couple of new async
mailbox commands which signify connection in Point-to-Point mode
(N-port or F-port) or indicate various toe stubbing getting to same.
Approved: jkh@freebsd.org
interface on the dhclient command line. Not doing so screws up vmware's
network interface by attempting to configure it for DHCP (which will
never work, of course). It also would impact any other interface that
may be present that, again, would likely be manually configured for
some other purpose.
Approved by: jkh
parameter is missing, or specified as above, then passwd behaves as normal
when the user enters an all lower case password -- i.e., it prompts them
to use mixed case, and will only grudgingly accept an all lower case
password.
If you negate this entry in login.conf, with "mixpasswordcase@", then
passwd will allow all lower case passwords without complaining.
Approved by: jkh
parameter is missing, or specified as above, then passwd behaves as normal
when the user enters an all lower case password -- i.e., it prompts them
to use mixed case, and will only grudgingly accept an all lower case
password.
If you negate this entry in login.conf, with "mixpasswordcase@", then
passwd will allow all lower case passwords without complaining.
Approved by: jkh
