routine wakes up proc0 so that proc0 can swap the thread back in.
Historically, this has been done by waking up proc0 directly from
setrunnable() itself via a wakeup(). When waking up a sleeping thread
that was swapped out (the usual case when waking proc0 since only sleeping
threads are eligible to be swapped out), this resulted in a bit of
recursion (e.g. wakeup() -> setrunnable() -> wakeup()).
With sleep queues having separate locks in 6.x and later, this caused a
spin lock LOR (sleepq lock -> sched_lock/thread lock -> sleepq lock).
An attempt was made to fix this in 7.0 by making the proc0 wakeup use
the ithread mechanism for doing the wakeup. However, this required
grabbing proc0's thread lock to perform the wakeup. If proc0 was asleep
elsewhere in the kernel (e.g. waiting for disk I/O), then this degenerated
into the same LOR since the thread lock would be some other sleepq lock.
Fix this by deferring the wakeup of the swapper until after the sleepq
lock held by the upper layer has been locked. The setrunnable() routine
now returns a boolean value to indicate whether or not proc0 needs to be
woken up. The end result is that consumers of the sleepq API such as
*sleep/wakeup, condition variables, sx locks, and lockmgr, have to wakeup
proc0 if they get a non-zero return value from sleepq_abort(),
sleepq_broadcast(), or sleepq_signal().
Discussed with: jeff
Glanced at by: sam
Tested by: Jurgen Weber jurgen - ish com au
MFC after: 2 weeks
lstat(2) is called on symlinks -- this code appears never to have
worked. The PR this addresses suggests that the intended
original behavior is the right one, but as bde points out in the
PR comments, we do actually support storing a mode on symlinks,
so returning it seems reasonable.
This is consistent with Mac OS X, which despite documentation to
the contrary does return the mode set on a symlink, but not some
other platforms. The Single Unix Spec requires only that the
returned bits be "meaningful", which seems at best unhelpful as
advice goes.
PR: 25018
MFC after: 3 days
vnode lock may cause a LOR between kld_sx lock and vnode lock.
linker_load_dependencies() drops kld_sx, and another thread may attempt
to load the same kld.
Reported and tested by: pjd
MFC after: 1 week
processes are not producing absolute pathname tokens. It is required
that audited pathnames are generated relative to the global root mount
point. This modification changes our implementation of audit_canon_path(9)
and introduces a new function: vn_fullpath_global(9) which performs a
vnode -> pathname translation relative to the global mount point based
on the contents of the name cache. Much like vn_fullpath,
vn_fullpath_global is a wrapper function which called vn_fullpath1.
Further, the string parsing routines have been converted to use the
sbuf(9) framework. This change also removes the conditional acquisition
of Giant, since the vn_fullpath1 method will not dip into file system
dependent code.
The vnode locking was modified to use vhold()/vdrop() instead the vref()
and vrele(). This will modify the hold count instead of modifying the
user count. This makes more sense since it's the kernel that requires
the reference to the vnode. This also makes sure that the vnode does not
get recycled we hold the reference to it. [1]
Discussed with: rwatson
Reviewed by: kib [1]
MFC after: 2 weeks
It seems we only use `lbolt' inside the VFS syncer and the TTY layer
now. Because I'm planning to replace the TTY layer next month, there's
no reason to keep `lbolt' if it's only used in a single thread inside
the kernel.
Because the syncer code wanted to wake up the syncer thread before the
timeout, it called sleepq_remove(). Because we now just use a condvar(9)
with a timeout value of `hz', we can wake it up using cv_broadcast()
without waking up any unrelated threads.
Reviewed by: phk
After the import of the new TTY layer, the TTY_QUOTE definition will not
be present anymore. To make sure clists will still work as expected,
introduce an internal definition called QUOTEMASK.
Maybe we can decide to remove the quote bits entirely, but we still have
to look into this. There may be drivers that still use the quote bits.
Obtained from: //depot/projects/mpsafetty
- When a cpuset is applied to a thread, walk the cpuset to see if it is a
"full" cpuset (includes all available CPUs). If not, set a new
TDS_AFFINITY flag to indicate that this thread can't run on all CPUs.
When inheriting a cpuset from another thread during thread creation, the
new thread also inherits this flag. It is in a new ts_flags field in
td_sched rather than using one of the TDF_SCHEDx flags because fork()
clears td_flags after invoking sched_fork().
- When placing a thread on a runqueue via sched_add(), if the thread is not
pinned or bound but has the TDS_AFFINITY flag set, then invoke a new
routine (sched_pickcpu()) to pick a CPU for the thread to run on next.
sched_pickcpu() walks the cpuset and picks the CPU with the shortest
per-CPU runqueue length. Note that the reason for the TDS_AFFINITY flag
is to avoid having to walk the cpuset and examine runq lengths in the
common case.
- To avoid walking the per-CPU runqueues in sched_pickcpu(), add an array
of counters to hold the length of the per-CPU runqueues and update them
when adding and removing threads to per-CPU runqueues.
MFC after: 2 weeks
- Check if panicstr isn't set, if it is ignore the lock. This helps to avoid
confusion, because lockmgr is a no-op when panicstr isn't NULL, so
asserting anything at this point doesn't make sense and can just race with
other panic.
Discussed with: kib
The ttyinfo() routine generates the fancy output when pressing ^T. Right
now it is stored in tty.c. In the MPSAFE TTY code it is already stored
in tty_info.c. To make integration of the MPSAFE TTY code a little
easier, take the same approach.
This makes the TTY code a little bit more readable, because having the
proc_*/thread_* routines in tty.c is very distractful.
Approved by: philip (mentor)
child process immediately after bulk bcopy() without dropping the
process lock.
Since process is not single-threaded when forking, dropping and
reacquiring the lock allows an other thread to change the process title
of the parent in between, and results in hold being done on the invalid
pointer. The problem manifested itself as the double free of the old
p_args.
Reported by: kris
Reviewed by: jhb
MFC after: 1 week
and there is no need to maintain it.
- Fix vn_get() in order to let it call vget(9) with a valid locking
request. vget(9) returns the vnode locked in order to prevent recycling,
but in this case internal XFS locks alredy prevent it from happening, so
it is safe to drop the vnode lock before to return by vn_get().
- Add a VNASSERT() in vget(9) in order to catch malformed locking requests.
Discussed with: kan, kib
Tested by: Lothar Braun <lothar at lobraun dot de>
interrupt-driven configuration handlers to complete, print out a
diagnostic message every 60 second indicating which handlers are
still running. Do this at most 5 times per run so as to avoid
scrolling out any useful information from the kernel message
buffer.
The interval of 60 seconds was selected based on a best guess as
to the nature of "long enough" and may want to be tuned higher
or lower depending on real-world tolerances.
MFC after: 3 days
Discussed with: scottl
for completion in run_interrupt_driven_config_hooks(). This is
helpful when trying to figure out which device drivers have gone
into la-la land during boot-time autoconfiguration.
MFC after: 3 days
- When a tick occurs on a cpu, iterate from cs_softticks until ticks.
The per-cpu tick processing happens asynchronously with the actual
adjustment of the 'ticks' variable. Sometimes the results may
be visible before the local call and sometimes after. Previously this
could cause a one tick window where we didn't evaluate the bucket.
- In softclock fetch curticks before incrementing cc_softticks so we
don't skip insertions which were made for the current time.
Sponsored by: Nokia
sched_tick() to prevent multiple increments for one tick. This pushes
the value out of range and breaks priority calculation.
Reviewed by: kib
Found by: pho/nokia
Sponsored by: Nokia
MFC after: 3 days
set MNT_UPDATE in fsflags, and delete the
"update" option from the global mount options.
MNT_UPDATE is a command, and not a property of a mount
that should persist after the command is executed.
We need to do similar things for MNT_FORCE and MNT_RELOAD.
All mount flags are prefixed by MNT_..... it would
be nice if flags which were commands were named differently
from flags which are persistent properties of a mount.
This was not such a big deal in the pre-nmount() days,
but with nmount() it is more important.
Requested by: yar
MFC after: 2 weeks
SI_ALIAS flag and initialization of the si_parent when alias is created.
Assert that supplied parent device is not NULL.
Both situations could cause NULL dereference in the
devfs_populate_loop() when creating a symlink for SI_ALIAS'ed device.
Namely, cdp->cdp_c.si_parent may be NULL.
Reported by: mav
MFC after: 2 weeks
the syscall code and acquires various event subsystem locks as needed.
The handling of the NOTE_TRACK for EVFILT_PROC is currently done by
calling the kqueue_register() from filt_proc() filter, causing recursive
entrance of the kqueue code. This results in the LORs and recursive
acquisition of the locks.
Implement the variant of the knote() function designed to only handle
the fork() event. It mostly copies the knote() body, but also handles
the NOTE_TRACK, removing the handling from the filt_proc(), where it
causes problems described above. The function is called from the fork1()
instead of knote().
When encountering NOTE_TRACK knote, it marks the knote as influx
and drops the knlist and kqueue lock. In this context call to
kqueue_register is safe from the problems.
An error from the kqueue_register() is reported to the observer as
NOTE_TRACKERR fflag.
PR: 108201
Reviewed by: jhb, Pramod Srinivasan <pramod juniper net> (previous version)
Discussed with: jmg
Tested by: pho
MFC after: 2 weeks
KQ_FLUX_WAKEUP(). Since the later macro clears the KQ_FLUXWAIT, the
kqueue_scan() thread may be not woken up.
Move the setting of KQ_FLUXWAIT after wakeup to correct the issue.
Reported and tested by: pho
MFC after: 3 days
