single outstanding DMA read operation. Most controllers targeted to
client with PCIe bus interface(e.g. BCM5761) may have this
limitation. All controllers for servers does not have this
limitation.
Collapsing mbuf chains to reduce number of memory reads before
transmitting was most effective way to workaround this. I got about
940Mbps from 850Mbps with mbuf collapsing on BCM5761. However it
takes a lot of CPU cycles to collapse mbuf chains so add tunable to
control the number of allowed TX buffers before collapsing. The
default value is 0 which effectively disables the forced collapsing.
For most cases 2 would yield best performance(about 930Mbps)
without much sacrificing CPU cycles.
Note the collapsing is only activated when the controller is on
PCIe bus and the frame does not need TSO operation. TSO does not
seem to suffer from the hardware limitation because the payload
size is much bigger than normal IP datagram.
Thanks to davidch@ who told me the limitation of client controllers
and actually gave possible workarounds to mitigate the limitation.
Reviewed by: davidch, marius
- Instead of measuring last request execution time for each drive and
choosing one with smallest time, use averaged number of requests, running
on each drive. This information is more accurate and timely. It allows to
distribute load between drives in more even and predictable way.
- For each drive track offset of the last submitted request. If new request
offset matches previous one or close for some drive, prefer that drive.
It allows to significantly speedup simultaneous sequential reads.
PR: kern/113885
Reviewed by: sobomax
Previously the failing operation would allocate an mbuf and construct an
error reply, but because the function did not return 0, the NFS server
assumed it had failed to generate a reply and would leak the reply mbuf as
well as not sending the reply to the NFS client.
PR: kern/140853
Submitted by: Ted Faber faber at isi edu (remove)
Reviewed by: rmacklem (remove)
MFC after: 1 week
- use utility macros for CPU family/model checking
- limit Intel P6 quirk to pre-Nehalem models (taken from OpenSolaris)
- add AMD GartTblWkEn quirk for families 0Fh and 10h; I haven't experienced
any problems without the quirk but both Linux and OpenSolaris do this
- slightly re-arrange quirk code to provide for the future generalization
and separation of vendor-specific quirk functions
Reviewed by: jhb
MFC after: 1 week
table of functions.
This commit (which is heavily based on work done by Marta Carbone
in this year's GSOC project), removes the goto's and explicit
return from the inner switch(), so we will have a easier time when
putting the blocks into individual functions.
MFC after: 3 weeks
Ideally we should attempt attaching only to known supported devices.
But I am not sure that we have all supported PCI IDs already listed,
and I am too young to die, err, I don't want to take the heat from
causing a trouble to someone.
MFC after: 1 week
X-ToDo: drop the default case
Memory accesses are posted in program order by virtue of the
uncacheable memory attribute.
Since GCC, by default, adds acquire and release semantics to
volatile memory loads and stores, we need to use inline assembly
to guarantee it. With inline assembly, we don't need volatile
pointers anymore.
Itanium does not support semaphore instructions to uncacheable
memory.
(gcc 4.x under linux, not sure how real is the complaint).
- rename a macro argument to prevent name clashes.
- add the macro name on a couple of #endif
- add a blank line for readability.
MFC after: 3 days
ndis_scan() is called. However, ndis_scan() is invoked from softclock()
and cannot sleep. Move ndis_scan_results() to the ndis' driver's scan_end
hook instead.
Submitted by: Paul B Mahol onemda of gmail
MFC after: 1 week
using the new option numbers, IP_FW3 and IP_DUMMYNET3.
Right now the modules return an error if called with those arguments
so there is no danger of unwanted behaviour.
MFC after: 3 days
- directly print mca information in case we fail to allocate memory
for a record
- include bank number into mca record
- print raw mca status value for extended information
Reviewed by: jhb
MFC after: 10 days
No functional differences.
- use the div64() macro to wrap 64 bit divisions
(which almost always are 64 / 32 bits) so they are easier
to handle with compilers or OS that do not have native
support for 64bit divisions;
- use a local variable for p_numbytes even if not strictly
necessary on HEAD, as it reduces diffs with FreeBSD7
- in dummynet_send() check that a tag is present before
dereferencing the pointer.
- add a couple of blank lines for readability near the end of a function
MFC after: 3 days
It fixes the issue which keep-alive doesn't work for an IPv6.
PR: kern/117234
Submitted by: mlaier, Joost Bekkers <joost__at__jodocus.org>
MFC after: 1 month
priority for such important information as MASTER/BACKUP state change,
and used a normal logging priority for such innocent messages as receiving
short packet (which is a normal VRRP packet between some other routers) or
receving a CARP packet on non-carp interface (someone else running CARP).
This commit shifts message logging priorities to a more sane default.
so the size and alignment of the ipfw_insn is not compiler dependent.
No changes in the code generated by gcc.
There was only one instance of this kind in our entire source tree,
so i suspect the old definition was a poor choice (which i made).
MFC after: 3 days
When the termios CREAD flag is not set, it makes little sense to
allocate an input buffer. Just set the size to 0 in this case to reduce
memory footprint.
Disallow CREAD to be disabled for pseudo-devices to prevent
foot-shooting.
config(8) doesn't parse parantheses and instead treated them as being
part of the device driver name (e.g. '(u3g' vs 'u3g'). While here, fix the
style of these long lines to match the wrapping used for other long lines
in this file.
Submitted by: Brett Glass
MFC after: 1 week
The hardware is compliant with WDRT specification, so I originally
considered including generic WDRT watchdog support, but decided
against it, because I couldn't find anyone to the code for me.
WDRT seems to be not very popular.
Besides, generic WDRT porbably requires a slightly different driver
approach.
Reviewed by: des, gavin, rpaulo
MFC after: 3 weeks
baseline subtraction, and are very temperature sensitive, so would slowly
drift out of a calibrated state when under load. Escape this by taking
the last frame before we decide that the pad is idle as a finger-free
baseline.
Tested on: iBook G4