bsnmpd's snmp_hostres module:
usr.sbin/bsnmpd/modules/snmp_hostres/hostres_snmp.c:204:20: error: absolute value function 'abs' given an argument of type 'const long' but has parameter of type 'int' which may cause truncation of value [-Werror,-Wabsolute-value]
str[9] = (u_char)(abs(tm->tm_gmtoff) / 3600);
^
usr.sbin/bsnmpd/modules/snmp_hostres/hostres_snmp.c:204:20: note: use function 'labs' instead
str[9] = (u_char)(abs(tm->tm_gmtoff) / 3600);
^~~
labs
usr.sbin/bsnmpd/modules/snmp_hostres/hostres_snmp.c:205:22: error: absolute value function 'abs' given an argument of type 'const long' but has parameter of type 'int' which may cause truncation of value [-Werror,-Wabsolute-value]
str[10] = (u_char)((abs(tm->tm_gmtoff) % 3600) / 60);
^
usr.sbin/bsnmpd/modules/snmp_hostres/hostres_snmp.c:205:22: note: use function 'labs' instead
str[10] = (u_char)((abs(tm->tm_gmtoff) % 3600) / 60);
^~~
labs
Since tm::tm_gmtoff is a long, use labs(3) instead.
MFC after: 3 days
usr.sbin/rtadvd:
usr.sbin/rtadvd/rtadvd.c:1291:7: error: taking the absolute value of unsigned type 'unsigned int' has no effect [-Werror,-Wabsolute-value]
abs(preferred_time - pfx->pfx_pltimeexpire) > rai->rai_clockskew) {
^
usr.sbin/rtadvd/rtadvd.c:1291:7: note: remove the call to 'abs' since unsigned values cannot be negative
abs(preferred_time - pfx->pfx_pltimeexpire) > rai->rai_clockskew) {
^~~
usr.sbin/rtadvd/rtadvd.c:1324:7: error: taking the absolute value of unsigned type 'unsigned int' has no effect [-Werror,-Wabsolute-value]
abs(valid_time - pfx->pfx_vltimeexpire) > rai->rai_clockskew) {
^
usr.sbin/rtadvd/rtadvd.c:1324:7: note: remove the call to 'abs' since unsigned values cannot be negative
abs(valid_time - pfx->pfx_vltimeexpire) > rai->rai_clockskew) {
^~~
2 errors generated.
These warnings occur because both preferred_time and pfx_pltimeexpire
are uint32_t's, so the subtraction expression is also unsigned, and
calling abs() is a no-op.
However, the intention was to look at the absolute difference between
the two unsigned quantities. Introduce a small static function to
clarify what we're doing, and call that instead.
Reviewed by: hrs
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D1197
establishing connection.
This is a workaround for Chelsio TOE driver, that does not update socket
buffer size in hardware after connection established, and unless that is
done beforehand, kernel code will stuck, attempting to send/receive full
PDU at once.
MFC after: 1 week
Previous order confused initiators with messages about "removed" LUNs
during simple ctld restart without any real config change. After this
commit initiators only reestablish lost connection, receive "Power on
occurred" UNIT ATTENTION status and continue normal operation.
MFC after: 1 month
for reasons yet unknown; don't make it increment cumulated_error as a kind
of temporary workaround.
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
and map files work together, and add example for smbfs.
Differential Revision: https://reviews.freebsd.org/D1184
Reviewed by: wblock@
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
workdir which would break the upgrade process upon reboot.
Currently we check for tmpfs and mdmfs.
PR: 195006
Differential Revision: https://reviews.freebsd.org/D1163
Approved by: cperciva
Previously, we have a nap interval of 1 second while we have a timeout of
128 seconds by default, which could be an overkill, and for some hardware
the patting action may be expensive.
Note that the choice of nap interval is still arbitrary. We preferred
a safe value where even when the system is very heavily loaded, the
watchdog should not shoot the system down if it's not really hung.
According to the manual page of Linux's watchdog daemon, the nap interval
time of theirs is 10 seconds, which seems to be a reasonable value --
according to Intel documentation AP-725 (Document Number: 292273-001),
ICH5's maximum timeout is about 37.5 seconds, which the ichwd(4) driver
would set when we requested 128 seconds (although it should probably
feed back this as an error and do not set the timeout). Since that's
the shortest maximum value, 10 seconds seems to be a right choice for
us too.
Discussed with: alfred
MFC after: 1 month
have chosen different (and more traditional) stateless/statuful
NAT64 as translation mechanism. Last non-trivial commits to both
faith(4) and faithd(8) happened more than 12 years ago, so I assume
it is time to drop RFC3142 in FreeBSD.
No objections from: net@
While all tested initiators and targets use hex-encoded CHAP data, RFC also
allows base64 encoding there, and Microsoft certificaition tool uses it.
Reviewed by: trasz (earlier version)
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
For ZVOL-backed LUNs this allows to inform initiators if storage's used or
available spaces get above/below the configured thresholds.
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
