This config never worked. At no time did u-boot match the kenrel match
the userland. As all the GUMSTIX gear we support is quite old and/or
not working, remove it. The duovero stuff might work, but nobody
has the hardware for it and GUMSTIX hasn't sold it in years.
This is needed with new u-boot that uses the rpi-firmware dtbs.
Reviewed by: gjb
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D16240
This reduce the per-board arm_install_uboot to just install u-boot.
While here remove the installation of rpi.dtb and rpi2.dtb as we load
them from the UFS partition via ubldr.
Reviewed by: gjb, imp (older version)
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D16239
r332674 raised the size of the FAT partition from 2MB to 41MB for some
boards. But we format them in FAT12 and this size appears to be to big
for FAT12 and some SoC bootrom cannot cope with that.
Format the msdosfs partition as FAT16,
PR: 228285
MFC after: soon
current size may not be sufficiently large for development and/or
testing.
PR: 227548
Submitted by: trasz
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
Latest u-boot update need u-boot script to load and start ubldr.
(See D14230 for more details)
Copy this file for our arm release on the fat partition.
Approved by: gjb
The u-boot port for RPI-2 was updated to use u-boot-master, this cause
an update in u-boot version to v2017.09 and changing the filename.
The various firmware files for the RPI* are now in a common ports
sysutils/rpi-firmware as they are shared on all the RPI version.
Update the release files to copy the right files from the right location.
Reviewed by: gjb
MFC after: 3 days
THe u-boot port for RPI-B was updated to use u-boot-master, this cause
an update in u-boot version to v2017.09 and changing the filename.
The various firmware files for the RPI* are now in a common ports
sysutils/rpi-firmware as they are shared on all the RPI version.
Update the release files to copy the right files from the right location.
Reviewed by: gjb
MFC after: 3 days
Update the TARGET/TARGET_ARCH matching in release/release.sh and
release/Makefile.mirrors for simplification.
Discussed with: mmel
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
ubldr is the non-pie version of ubldr.bin, do not install two
copies of the same binary. This will allow us to remove ubldr
in the future.
All the u-boot ports know how to load ubldr.bin
Reviewed by: gjb (earlier version)
to 1.5G.
- Use the 'conv=sync' dd(1) option to fix writing the u-boot.imx
file to the md(4) device for IMX6-based boards.
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
MS-DOS partition. This will help with transitioning to
a single arm/armv6 userland build which could be used for
all FreeBSD/armv6 images without UBLDR_LOADADDR being set
for each board (ultimately requiring a separate buildworld
for each currently).
Requested by: ian
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
While 480M is sufficient for 10-STABLE, 11-CURRENT images at
this size fail due to insufficient space.
This commit is solely for the sake of getting updated snapshot
builds out, after which I'll analyze the resulting images to
figure out what a more sane value is, even if the image size
for 11-CURRENT needs to differ from 10-STABLE.
Sponsored by: The FreeBSD Foundation
Since the images are effectively mostly zeros at 1G,
reduce the size to allow installation on smaller SD
cards, such as 512Mb.
While here, stop writing the /boot.txt file on the
WANDBOARD, which isn't used anyway.
Discussed with: imp
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
Of note:
- This commit adds native FreeBSD/arm release build support without
requiring out-of-tree utilities.
- Part of this merge removes the WANDBOARD-{SOLO,DUAL,QUAD} kernel
configuration files, for which the IMX6 kernel configuration file
should be used instead.
- The resulting images have a 'freebsd' user (password 'freebsd'),
to allow ssh(1) access when console access is not available (VGA
or serial). The default 'root' user password is set to 'root'.
- The /etc/ttys file for arm images now enable both ttyv0 and ttyu0
by default.
Help from: many (boot testing, feedback, etc.)
Sponsored by: The FreeBSD Foundation
since it supports all of these board variants.
While here, remove the WANDBOARD-{QUAD,SOLO,DUAL} kernel
configuration files.
Discussed with: ian
Sponsored by: The FreeBSD Foundation
error:
root@releng2:/ # mount_msdosfs /dev/md5s1 /usr/obj/usr/src/release/WANDBOARD-QUAD/fat
mount_msdosfs: /dev/md5s1: File name too long
Sponsored by: The FreeBSD Foundation
