Change the list interface to simplify things.
Remove old list ioctls which bogusly exported the softc to userland.
Move the softc and associated structures from the public header to
the source file.
hinge on the "verb" parameter which the class gets to interpret as
it sees fit.
Move the entire request into the kernel and move changed parameters
back when done.
with UFS1, the UFS1 superblocks were not deleted. This allowed any
RELENG_4 (or other non-UFS2-aware) fsck to think it knew how to "fix"
the file system, resulting in severe data scrambling.
This patch is a more advanced version than the one originally submitted.
Lukas improved it based on feedback from Kirk, and testing by me. It
blanks all UFS1 superblocks (if any) during a UFS2 newfs, thereby causing
fsck's that are not UFS2 aware to generate the "SEARCH FOR ALTERNATE
SUPER-BLOCK FAILED" message, and exit without damaging the fs.
PR: bin/51619
Submitted by: Lukas Ertl <l.ertl@univie.ac.at>
Reviewed by: kirk
Approved by: re (scottl)
one or more actions in the list. This makes constructs like:
attach 10 {
// echo "Driver $device_name attached"
};
to be accepted by the parser. It will be treated as if the user had
entered:
// attach 10 {
// echo "Driver $device_name attached"
// };
(eg totally ignored).
Approved by: re@ (rwatson)
changed to use libufs in revision 1.71. Without this, any write
failures in newfs were silently ignored.
Note that this will display a meaningless errno string in the case
of a short write as opposed to a write error, since bwrite()'s
return value does not allow the caller to determine if errno is
valid.
Reported by: Lukas Ertl <l.ertl@univie.ac.at>
Reviewed by: jmallett
Approved by: re (bmah)
Just because we for the last ten years have fought for every byte
in the boot code on i386, doesn't mean that other architectures could
not actually have space to spare there.
Remore debugging message.
crashes, the config remains locked and causes all
subsequent start or read attempts to fail. This is part
of a fix for the recently reported hangs.
Approved by: re (scottl)
- dumpon utility has not used kern.dumpdev sysctl
since rev. 1.14 (sbin/dumpon/dumpon.c) when phk@
updated it to use the DIOCSKERNELDUMP ioctl [1]
- remove obsolete reference to sysctl(3)
While I am there, fix two style nits:
- use .Nm instead of `dumpon'
- change NOTES to IMPLEMENTATION NOTES, to bring
it in line with recommended section headings in
mdoc(7)
Original patch by: Martin Faxer <gmh003532brfmasthugget.se> [1]
PR: docs/39293
Approved and Reviewed by: des (mentor), re (scottl, bmah)
1024-byte boundaries. For many years this was a reasonable
assumption. However, in recent years we have begun seeing
devices with 2048-byte sectors. These devices return errors
when dump tries to read starting in the middle of a sector
or when it tries to read only the first half of a sector.
Rather than change the native block size used by dump (and
thus create an incompatible dump format), this fix checks
for transfer requests that start and/or end on a non-sector
boundary. When such a read is detected, the new code reads
the entire sector and copies out just the part that dump
needs.
Reviewed by: Poul-Henning Kamp <phk@critter.freebsd.dk>
Approved by: re (John Baldwin <jhb@FreeBSD.org>)
Sponsored by: DARPA & NAI Labs.
work because it referred to plexes which were almost invariably when
referred to. Instead, deprecate the "prefer" keyword for volumes
(though it's still there for the moment) and add a keyword "preferred"
to the plex definition. The relationship is like this:
Old:
vol foo ... prefer foo.p3
New:
plex foo.p3 volume foo preferred
printconfig: Print out the "preferred" keyword for plexes where
appropriate.
Still print out "prefer" for volumes. The kernel module
continues to accept this version, but it's probably not
going to live much longer.
references to it's man page, which is almost never installed on a
FreeBSD system. The information about using this command with gated
has been retained. I have just made it clear that gated is not a part
of FreeBSD.
PR: docs/51407
vinum_read:
Accept 0 parameters, hand an empty string to the kernel if so.
Use new ioctl VINUM_READCONFIG, not VINUM_CREATE, to read config.
vinum_start: When passed 0 parameters, drop the devstat kludge and
call vinum_read instead. It's no longer necessary to distinguish
between "start" and "read" if no parameters are passed, and
probably one of them should go away.
Hide all the historical fields of the label, unless people ask for them with -A,
set them to intelligently chosen defaults otherwise.
Distill the manual page to remove inaccuracies, misundertandings and obsolete
information. It can probably still be done better but now at least it is
not misinforming people.
recorded in global variables, rather than checks on the architecture.
Drop horribly code to handle MBR/PC98's embedded in the BSD label area.
If you need to have an MBR or PC98 on your disk, you should not overlap
it with a BSDLABEL, if you don't need it, this code is nothing but trouble.
for the alpha checksum, and set them depending on the specified architecture
Don't look for disklabels every 16 bytes, look the only place they should
be for the current architecture.
Always read the label from the raw disk and decode it into struct
disklabel rather than trust a cast from random addresses.
When writing to the raw disk, encode the label properly.
Change name of history file to History to avoid name conflicts.
Don't try to make devices unless devfs has been removed.
Don't accept resetconfig command from a file.
Abused by: Jens Schweikhardt <schweikh@schweikhardt.net>
Remove dead code (#if 0)
vinum_mirror: Don't try to create mirrors with 0 drives.
Found by: mismatch between enum kw in two different files.
Change name of history file to History to avoid name conflicts.
Rewrite minor number decoding. Now we have only three types of
object: subdisks, plexes and volumes. The encoding for plexes and
subdisks no longer reflects the object to which they belong. The
super devices are high-order volume numbers. This gives vastly more
potential volumes (4 million instead of 256).
Don't try to chown directories if they haven't been created.
be changed, it is very convenient to be able to toggle SDH/Sonet,
idle/unassigned cells and scrambled mode and to see the carrier
state.
Reviewed by: -arch (if_media.h definitions)
in /etc/fstab to get a memory disk:
md /tmp mfs rw,-s8m,noatime 2 2
Back when mdmfs was created, there was vague discussion about doing this, but
it never materialized.
Reminded by: Ralf S. Engelschall <rse@engelschall.com>
definitions in it. Begin to document the classes that we use, and how
they interrelate (using comments that I can use with doxygen to
automatically generate docs with).
expand one from using a fixed buffer to using a string which
dynamically allocates these things.
Submitted by: green@ (against an earlier version of devd)
Ignored for too long by: imp
Also, put a small work around into devd to prevent a hang on boot this
would cause because select used to return 2 rather than 0 for no
evetnts due to a bug I fixed a few days ago in subr_bus.c. I'll
remove this workaround May 7th. You have until then to upgrade your
kernel if you want to run a new devd with an older kernel.
where we want to take the disklabel filesystem type of "4.2BSD" and use
fsck_4.2bsd on those filesystems.
Add a comment about why the code is there, now that we know:
* XXX This is a kludge to make automatic filesystem type guessing
* from the disklabel work for "4.2BSD" filesystems. It does a
* very limited subset of transliteration to a normalised form of
* filesystem name, and we do not seem to enforce a filesystem
* name character set.
'd': now means don't do daemon().
'D': Debug
'n': Don't wait to process all pending events before calling daemon.
In the past, devd would call daemon immediately. However, this causes
a race. If anything in the boot process depends on configuring the
devices configured by devd, maybe they would be configured in time,
maybe not. Now we don't call daemon until all pending events are
processed, unless -n is specified.
# -n is actually the default for a while due to the select(2) bug in devctl
# that I just fixed to give people a chance to upgrade.
to 0 when we startup. Print a warning in this case. This allows
people that are playing with devd by hand to have something happen.
Otherwise, it appears that devd isn't working because /dev/devctl is
disabled and producing no events.
Suggested by: peter on irc a long time ago.
'a="b" c="d" at loc=1 on busN' properly set 'c' and process the rest of
the stirng. Before it would ignore everything after variable 'a'.
o Parse nomatch and other events differently. They are more different
than the code allowed for, so we weren't properly parsing nomatch
events. It appears this fixes some of the demand loading issues that
I was having with devd.
Noticed by: Gary Palmer
FreeBSD 5.1-RELEASE and later:
- newfs(8) will now create UFS2 file systems unless UFS1 is specifically
requested (-O1). To do this, I just twiddled the Oflag default.
- sysinstall(8) will now select UFS2 as the default layout for new
file systems unless specifically requested (use '1' and '2' to change
the file system layout in the disk labeler). To do this, I inverted
the ufs2 flag into a ufs1 flag, since ufs2 is now the default and
ufs1 is the edge case. There's a slight semantic change in the
key behavior: '2' no longer toggles, it changes the selection to UFS2.
This is very similar to a patch David O'Brien sent me at one point, and
that I couldn't find.
Approved by: re (telecon)
Reviewed by: mckusick, phk, bmah
kern.geom.conftxt, which md disks don't show up in. If the magic and
the checksum are right assume its a valid sunlabel, otherwise use the
DIOC ioctls to get the disk parameters and whip up a label out of thin
air.
- Don't just silently create or correct invalid c partitions, warn about
invalid ones in label proto files.
- Split checksumming into a function since we do it a couple times. Also
don't include the sl_cksum field in the checksum, which avoids needing
to clear it first.
This is makes sunlabel a suitable replacement for disklabel in make release.
Always set the magic sequence when we write, rather than trusting the
previously read boot code to do so.
Use explicit encoding/decoding of little endian disk image.
Remove a comment which was OBE.
Change the test vector for "fdisk -I" to reflect that there is a magic
sequence in the result now.
Add test case for "fdisk" which reads the image back.
At least for the two test-cases this program now gives the same result
on sparc64 as on i386. The lack of an installed /boot/mbr on sparc64
raises an (un)interesting question.
doesn't have a process group, which can occur if you're working with
a custom init that doesn't set up a full tty context. Rather than
refusing to reboot, ignore ESRCH from the kill attempt in reboot(8).
(See: ftp://ftp.rfc-editor.org/in-notes/rfc3514.txt)
This fulfills the host requirements for userland support by
way of the setsockopt() IP_EVIL_INTENT message.
There are three sysctl tunables provided to govern system behavior.
net.inet.ip.rfc3514:
Enables support for rfc3514. As this is an
Informational RFC and support is not yet widespread
this option is disabled by default.
net.inet.ip.hear_no_evil
If set the host will discard all received evil packets.
net.inet.ip.speak_no_evil
If set the host will discard all transmitted evil packets.
The IP statistics counter 'ips_evil' (available via 'netstat') provides
information on the number of 'evil' packets recieved.
For reference, the '-E' option to 'ping' has been provided to demonstrate
and test the implementation.
- Correct some problems with packet construction.
+--------+------------+----------+-------------+---------+
| | | | | |
| IP Hdr | MINICMPLEN | phdr_len | TIMEVAL_LEN | payload |
| | | | | |
+--------+------------+----------+-------------+---------+
| | | |
|<- IP ->|<------- ICMP -------->|<------ datalen ------>|
My previous changes tried to mess around with 'datalen' instead of
modifying 'phdr_len'.
I'm including this nice ASCII diagram (from Maxim) to further clarify things
in CVS history.
Submitted by: Maxim Konovalov <maxim@macomnet.ru>
when WARNS was increased recently, but __printf0like() has been
temporarily disabled for 8 months.
Fixed related style bugs (disordered declaraction and silly type for
maxpayload -- assume 16-bit ints like the rest of ping.c).
- Use it in atacontrol(8) when listing ATA devices instead of
stopping at the first ENXIO received.
This makes atacontrol list work on my sparc64 where the two ATA
channels I have are numbered 2 and 3.
Reviewed by: sos
This is aimed at creating floppies during cross-releases.
For different endianness machines, a tool like bswapfs(8)
is necessary to make the generated floppies readable on
the target machine. While here, fixed unaligned access
on Alphas.
Tested on: i386, alpha
Notable changes:
- Removed the "disktype" argument from the -B only synopsis
form. This form doesn't touch the disk label, and doesn't
use this argument.
- Fixed the first example in the EXAMPLES section. Support
for compatibility slices has been recently dropped from
the GEOM kernels, and a bit later GEOM became standard.
- Removed the buggy notion from rev. 1.37 that disklabel(8)
may be used to define mount points; it cannot. Improve
some DOS partition / FreeBSD slice wording. Among these,
``dangerously-dedicated slice'' was just a nonsense. ;-)
comes in on is the same interface that we would route out of to get to
the packet's source address. Essentially automates an anti-spoofing
check using the information in the routing table.
Experimental. The usage and rule format for the feature may still be
subject to change.
width of fields for packets and bytes counters.
PR: bin/47196
Reviewed by: -audit
Not objected by: luigi, des
o Use %llu instead of deprecated %qu convert specification for ipfw
packets and bytes counters.
Noted by: des
MFC after: 1 month
