Commit graph

3674 commits

Author SHA1 Message Date
Bruce Evans b8fa61d129 Added a setjmp() and a longjmp() so that an unexpected trap inside
ddb isn't necessarily fatal.  You can now do silly things like
`call vprint' and `show map' without losing control.
1997-03-28 12:56:07 +00:00
Bruce Evans b825df51c6 Backed out rev.1.5. if %cs is bad, %eip may be bad, but this is no longer
fatal.
1997-03-28 12:46:52 +00:00
Joerg Wunsch 403d7829ac Something long overdue: compile inb() and outb() into the kernel as
functions if DDB is available.  The remaining occurences are usually
only inlined and thus not available in DDB.

I'm sure Bruce will have 23 additions to these 30 lines of code, but
at least it's a starting point. ;-)
1997-03-28 12:37:44 +00:00
Kazutaka YOKOTA 31774f6d83 Interim patch/kludge for keyboard lock-up when `kbdcontrol' tries to
change typematic rate, or the X server (XFree86 or Accelerated X)
starts up.

So far, there have been two independent reports from Dell Latitude XPi
notebook/laptop owners. The Latitude seems to be the only system which
suffers from this problem.  (I don't know the problem is with the
entire Latitude line or with only some Latitude models) No problem
report has been heard about other systems (I certainly cannot
reproduce the problem in my -current and 2.2 systems).

In 3.0-CURRENT, 2.2-RELEASE and 2.2-GAMMA-970310, when programming the
keyboard LED/repeat-rate, `set_keyboard()' in `syscons' tells the
keyboard controller not to generate keyboard interrupt (IRQ1) and then
enable tty interrupts, expecting the keyboard interrupt doesn't occur.

It appears that somehow Latitude's keyboard controller still generates
the keyboard interrupt thereafter, and `set_keyboard()' doesn't see
the return code from the keyboard because it is consumed by the
keyboard interrupt handler.

The patch entirely disables tty interrupts while setting LED and
typematic rate in `set_keyboard()', making the routine behave more
like the previous versions of `syscons' (versions in 2.1.X and
2.2-ALPHA, -BETA, and some -GAMMAs). The reporter said this patch
eliminated the problem.

(I also found another typo/bug, but the reporter and I found that it
wasn't the cause of the problem...)

This should go into RELENG_2_2.
1997-03-28 10:11:24 +00:00
Andrey A. Chernov e5df661c83 Remove recently commited support for iobase == -2 ("port none")
is is really probe routine task (return -1 for no ports)
1997-03-28 01:02:17 +00:00
Andrey A. Chernov 5fba67d120 Add "conflicts" to sbmidi0 since configured irq passed back to isa
and conflict with sb0 irq.

NOTE: existen configurations require "conflicts" adding to sbmidi0 now
1997-03-26 17:46:03 +00:00
Andrey A. Chernov 5c0c82997e Check sb0 configured in probe routine first
Pass configured irq back to isa
1997-03-26 17:41:16 +00:00
Andrey A. Chernov 348a8a6aab Add "conflicts" to sbxvi0 since all information now passed to isa
and conflict with sb0 happens.

NOTE: it affects existen configurations, add "conflicts" to sbxvi0 line
if you see probe error
1997-03-26 17:20:24 +00:00
Andrey A. Chernov cc13c79696 Pass configured irq and ports number back to isa 1997-03-26 17:14:21 +00:00
Andrey A. Chernov 7ee2669b4c Allow low level probe routine pass configured information back to isa 1997-03-26 17:12:31 +00:00
Andrey A. Chernov add8f4123b Don't trick with opl0 address since we have conflicts keyword 1997-03-26 16:10:43 +00:00
Andrey A. Chernov 88bbadf749 Return ports number in probe now 1997-03-26 16:07:20 +00:00
Andrey A. Chernov 2a64e5d6b8 Return ports number in probe now 1997-03-26 15:57:08 +00:00
Andrey A. Chernov fb04706fc7 Fix probe wrapper to pass ports number from low level probe 1997-03-26 15:56:21 +00:00
Mike Pritchard 89b37cfe4b Change sigreturn() to return EFAULT if it is passed an
address outside of the process's address space.
Now it matches its man page :-).  Closes PR# 2682.

Discussed with: bde
Submitted by:	Jonathan Lemon <jlemon@americantv.com>
1997-03-25 23:43:01 +00:00
Andrey A. Chernov 588a8fcc98 Use FreeBSD-style attach message 1997-03-25 04:16:25 +00:00
Steve Passe 0e23e1a104 added support for EEProms writing/reading. 1997-03-25 04:11:13 +00:00
Andrey A. Chernov 0baa5ad9b2 Use port? for sbxvi0 since it is autoconfigured from sb0
Change sb0 irq from 7 to 5 since 5 is Creative default now.
1997-03-25 03:38:33 +00:00
Andrey A. Chernov 8c41947662 Copy io_base configuration address from sb config.
This change is cosmetique.
1997-03-25 03:32:31 +00:00
Andrey A. Chernov e4960ae4f5 Replace more verbose "at <not configured>" with less verbose "at ?",
we don't need much attention here, because this diagnostic printed first
and then card will be configured.
1997-03-25 03:29:40 +00:00
Andrey A. Chernov 70b57d05df Follow config intention for iobase:
print "at <not configured>" for iobase == -1 (autodetect not happens)
and not print anything for iobase == -2 (none)
Old code treat this two special config numbers as big port numbers.
1997-03-25 03:13:05 +00:00
David Nugent 117ffcde76 Remove unneeded prototype (and warning) for stlintr(). 1997-03-24 21:38:51 +00:00
Justin T. Gibbs c2df2e4bc2 Fix a fencepost error in ahc_find_scb that could cause us to wrongfully
find an SCB still down on the card that was paged out.  This only affects
error recovery.

Submitted by: Daniel M. Eischen <deischen@iworks.InterWorks.org>
1997-03-24 17:42:25 +00:00
Bruce Evans afd2f6c218 Don't include <sys/ioctl.h> in the kernel. Stage 5: include
<sys/ioctl_compat.h> and sometimes <sys/filio.h> instead of
<sys/ioctl.h> in tty-related files.  <sys/ttycom.h> is still
usually imported bogusly via <sys/termios.h>.
1997-03-24 12:03:06 +00:00
Bruce Evans 2098241054 Don't include <sys/ioctl.h> in the kernel. Stage 4: include
<sys/ttycom.h> and sometimes <sys/filio.h> instead of <sys/ioctl.h>
in miscellaneous files.  Most of these files have nothing to do
with ttys but need to include <sys/ttycom.h> to get the definitions
of TIOC[SG]PGRP which are (ab)used to convert F[SG]ETOWN fcntls into
ioctls.
1997-03-24 11:52:29 +00:00
Bruce Evans 71455815cc Don't include <sys/ioctl.h> in the kernel. Stage 3: include
<sys/filio.h> instead of <sys/ioctl.h> in non-network non-tty files.
1997-03-24 11:37:53 +00:00
Bruce Evans 51a534883a Don't include <sys/ioctl.h> in the kernel. Stage 2: include
<sys/sockio.h> instead of <sys/ioctl.h> in network files.
1997-03-24 11:33:46 +00:00
Bruce Evans fce002fdef Don't include <sys/ioctl.h> in the kernel. Stage 1: don't include
it when it is not used.  In most cases, the reasons for including it
went away when the special ioctl headers became self-sufficient.
1997-03-24 11:25:10 +00:00
Bruce Evans cb07fc9803 Don't default to (wrong) SCO definitions for _IOR() etc. if <sys/ioctl.h>
doesn't happen to be included before this header.

This header was missed in previous cleanups because it didn't include
<sys/ioctl.h> or <sys/ioccom.h>.  Clean it now:
- #include <sys/types.h> since it is necessary to make the header self-
  sufficient (there are a couple of u_char's).
- uniformized idempotency ifdef.  Copied the style in the 4.4Lite
  ioctl headers.
1997-03-24 11:07:52 +00:00
David Nugent e825ea20dd Make stlintr() public to allow correct linkage. 1997-03-24 07:25:31 +00:00
KATO Takenori 5fa4a05818 Fix typo.
Submitted by:	Bruce Evans <bde@zeta.org.au>
1997-03-24 07:23:05 +00:00
KATO Takenori 507cf9c96e Merge PC-98 code int i386/isa/ft.c. 1997-03-24 07:20:35 +00:00
Justin T. Gibbs 7d951713e8 Fix a nasty bug that meant a QUEUE_FULL status would result in a lost
SCB.  This is probably a main reason for the recent reports of timeouts.
1997-03-24 05:05:18 +00:00
KATO Takenori 56be183376 Created new section `CPU OPTIONS'. CPU classes and math emulator are
moved to there.  Options for CPU feature is also described there.
1997-03-23 11:08:28 +00:00
Bruce Evans 6617929964 Removed nested #includes of <scsi/scsi_debug.h> and <scsi/scsi_driver.h>
from <scsi/scsiconf.h> and fixed everything that depended on them.
1997-03-23 06:33:55 +00:00
Bruce Evans db0ac821f2 Removed nested #includes of <scsi/scsi_debug.h> and <scsi/scsi_driver.h>
from <scsi/scsiconf.h> and fixed everything that depended on them.
1997-03-23 06:26:47 +00:00
Bruce Evans 08febfa741 Removed nested #include of <sys/conf.h> from <scsi/scsi_driver.h>
and fixed everything that depended on getting it from the wrong
place.  Most of the broken things actually only depended on getting
the declaration of their interrupt handler from "ioconf.h".
1997-03-23 04:40:00 +00:00
Bruce Evans 3ac4d1ef0c Don't #include <sys/fcntl.h> in <sys/file.h> if KERNEL is defined.
Fixed everything that depended on getting fcntl.h stuff from the wrong
place.  Most things don't depend on file.h stuff at all.
1997-03-23 03:37:54 +00:00
KATO Takenori a8e282d6c3 Oops, I forgot to `cvs add'. This file is a part of new CPU
identification and initialization routines.
1997-03-22 19:00:36 +00:00
KATO Takenori 4c024bbdf8 Improved CPU identification and initialization routines. This
supports All Cyrix CPUs, IBM Blue Lightning CPU and NexGen (now AMD)
Nx586 CPU, and initialize special registers of Cyrix CPU and msr of
IBM Blue Lightning CPU.

If revision of Cyrix 6x86 CPU < 2.7, CPU cache is enabled in
write-through mode.  This can be disabled by kernel configuration
options.

Reviewed by:	Bruce Evans <bde@freebsd.org> and
            	Jordan K. Hubbard <jkh@freebsd.org>
1997-03-22 18:54:54 +00:00
Bruce Evans 3c81694426 Fixed some invalid (non-atomic) accesses to `time', mostly ones of the
form `tv = time'.  Use a new function gettime().  The current version
just forces atomicicity without fixing precision or efficiency bugs.
Simplified some related valid accesses by using the central function.
1997-03-22 06:53:45 +00:00
John Dyson 8e56e56134 Decrease the latency/overhead in the prezero code when there is
an adequate number of prezeroed pages.
1997-03-22 04:28:16 +00:00
Steve Passe d830eb7d9f Submitted by: Michael Petry <petry@netwolf.NetMasters.com>
Michael submitted code to activate the audio muxes.

fsmp:
 extended those changes for different boards.
 auto-detection of board types.
 auto-detection of tuner types.
 auto-detection of stereo option
1997-03-21 17:29:54 +00:00
Mike Pritchard 35846a8163 Typo police. 1997-03-20 16:33:15 +00:00
Steve Passe 535341aacb additions for table-driven frequency calculation.
addition of colorbar ioctl.
1997-03-19 19:08:31 +00:00
David E. O'Brien c85cfdb229 typo (nthe --> the) 1997-03-19 02:59:02 +00:00
Nate Williams 55e1a05578 Don't try to lint the gcc extension byte-swapping macros.
Submitted by:	Eivind Eklund <eivind@dimaga.com>
1997-03-17 00:51:51 +00:00
Bruce Evans 54c4d30615 Fixed broken line continuation in the previous revision. Config apparently
has buggy backslash-newline handling.  Avoid it by using whitespace before
backslash-newline.
1997-03-16 17:25:53 +00:00
Steve Passe d380dd6d8e patches for bt848 specific hue/bright/contrast/satu/satv. 1997-03-16 07:40:01 +00:00
Justin T. Gibbs f9380a619e Adapt to some changes in the register definitions. Clear the selection
enable in SCSISEQ during error recovery to deal with the way the
sequencer leaves selections enabled now.  Add code to perform "patching"
during sequencer program download.

Spelling fixes obtained from NetBSD.
1997-03-16 07:12:07 +00:00