the VRRPv2 advertisements will originate from the wrong source address.
This only affects kernels compiled with MROUTING and after the MRT_INIT
ioctl() has been issued.
Set imo_multicast_vif in carp's softc to the invalid value -1 after it is
zeroed by softc allocation, to stop the ip_output() path looking up the
incorrect source address thinking a vif is set.
PR: kern/100532
Submitted by: Bohus Plucinsky
MFC after: 1 week
written to the audit trail file:
- audit_record_write() now returns void, and all file system specific
error handling occurs inside this function. This pushes error handling
complexity out of the record demux routine that hands off to both the
trail and audit pipes, and makes trail behavior more consistent with
pipes as a record destination.
- Rate limit kernel printfs associated with running low on space. Rate
limit audit triggers for low space. Rate limit printfs for fail stop
events. Rate limit audit worker write error printfs.
- Document in detail the types of limits and space checks we perform, and
combine common cases.
This improves the audit subsystems tolerance to low space conditions by
avoiding toasting the console with printfs are waking up the audit daemon
continuously.
MFC after: 3 days
Obtained from: TrustedBSD Project
programs to find out exactly which events were registered and which were
returned... This should be lower in kern_kevent, but that would require
special munging due to locks and the functions used to copyin/copyout
kevents...
If someone wants to teach ktrace how to output pretty kevents, I have a
kevent prety printer that can be used...
The goal was to sync with the OSSv4 API 4Front Technologies uses in their
proprietary OSS driver. This was successful as far as possible. The part
of the API which is stable is implemented, for the rest there are some
stubs already.
New system ioctls:
- SNDCTL_SYSINFO - obtain audio system info (version, # of audio/midi/
mixer devices, etc.)
- SNDCTL_AUDIOINFO - fetch details about a specific audio device
- SNDCTL_MIXERINFO - fetch details about a specific mixer device
New audio ioctls:
- Sync groups (SNDCTL_DSP_SYNCGROUP/SNDCTL_DSP_SYNCSTART) which allow
triggered playback/recording on multiple devices (even across processes
simultaneously).
- Peak meters (SNDCTL_DSP_GETIPEAKS/SNDCTL_DSP_GETOPEAKS) - can query
audio drivers for peak levels (needs driver support, disabled for now).
- Per channel playback/recording levels -
SNDCTL_DSP_{GET,SET}{PLAY,REC}VOL. Note that these are still in name
only, just wrapping around the AC97-style mixer at the moment. The next
step is to push them down to the drivers.
Audio ioctls still under development by 4Front (for which stubs may exist
in this commit):
- SNDCTL_GETNAME, SNDCTL_{GET,SET}{SONG,LABEL}
- SNDCTL_DSP_{GET,SET}_CHNORDER
- SNDCTL_MIX_ENUMINFO, SNDCTL_MIX_EXTINFO - (might be documented enough in
the OSS releases to work on this. These ioctls cover the cool "twiddle
any knob on your card" features.)
Missing:
- SNDCTL_DSP_COOKEDMODE -- this ioctl is used to give applications direct
access to a card's buffers, bypassing the feeder architecture. It's
a toughy -- "someone" needs to decide :
(a) if this is desireable, and (b) if it's reasonably feasible.
Updates for driver writers:
So far, only two routines to the channel class (in channel_if.m) are added.
One is for fetching a list of discrete supported playback/recording rates
of a channel, and the other is for fetching peak level info (useful for
drawing peak meters). Interested parties may want to help pushing down
SNDCTL_DSP_{GET,SET}{PLAY,REC}VOL into the drivers.
To use the new stuff you need to rebuild the sound drivers or your kernel
(depending on if you use modules or not) and to install soundcard.h (a
buildworld/installworld handles this).
Sponsored by: Google SoC 2006
Submitted by: ryanb
Many thanks to: 4Front Technologies for their cooperation, explanations
and the nice license of their soundcard.h.
- Linux returns ENOPROTOOPT in a case of not supported opt to setsockopt.
- Return EISDIR in pread() when arg is a directory.
- Return EINVAL instead of EFAULT when namelen is not correct in accept().
- Return EINVAL instead of EACCESS if invalid access mode is entered in
access().
- Return EINVAL instead of EADDRNOTAVAIL in a case of bad salen param
to bind().
Submitted by: rdivacky
Tested with: LTP (vfork01 fails now, but it seems to be a race and
not caused by those changes)
MFC after: 1 week
the header field for possible later IPSEC SPD lookup, even
when the kernel is built without 'options INET6'.
PR: kern/57760
MFC after: 1 week
Submitted by: Joachim Schueth
you can't call tty_clone afterwords. OpenBSD and NetBSD both fail the
open call in that case, so we should do so as well. This can
be done in ctty_clone by returning with *dev==NULL. Admittedly this
causes open to return ENOENT, instead of ENXIO as on the other BSDs,
but this way requires the least touching of code.
Submitted by: Nate Eldredge <nge@cs.hmc.edu>
PR: 83375
MFC: 1 week
GDT to be loaded into FS.base and GS.base, these values of course
are not the values set by sysarch() with I386_SET_FSBASE and
I386_SET_GSBASE, the change fixed a crash for 32bit libthr after
signal handler returned and normal code is accessing thread pointer,
for example: movl %gs:8, %eax.
- Split out the communication protocols into their own files and use
a couple of function pointers in the softc that the commuication
protocols setup in their own attach routine.
- Add support for the SSIF interface (talking to IPMI over SMBus).
- Add an ACPI attachment.
- Add a PCI attachment that attaches to devices with the IPMI interface
subclass.
- Split the ISA attachment out into its own file: ipmi_isa.c.
- Change the code to probe the SMBIOS table for an IPMI entry to just use
pmap_mapbios() to map the table in rather than trying to setup a fake
resource on an isa device and then activating the resource to map in the
table.
- Make bus attachments leaner by adding attach functions for each
communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.)
that setup per-interface data.
- Formalize the model used by the driver to handle requests by adding an
explicit struct ipmi_request object that holds the state of a given
request and reply for the entire lifetime of the request. By bundling
the request into an object, it is easier to add retry logic to the various
communication backends (as well as eventually support BT mode which uses
a slightly different message format than KCS, SMIC, and SSIF).
- Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE.
- Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool
on FreeBSD/amd64.
- Add ipmi(4) to i386 and amd64 NOTES.
Submitted by: ambrisko (large portions of 2 and 3)
Sponsored by: IronPort Systems, Yahoo!
MFC after: 6 days
packets. Reimplement this correctly and use a sysctl that defaults to off so
the user doesnt get any suprises if ipfw blocks the ARP packet.
MFC after: 3 days
the entire record when a non-data mbuf is removed in the soreceive() path.
This only triggers a panic directly when compiled with INVARIANTS.
PR: 38495
Submitted by: James Juran
MFC after: 1 week
pmap_protect(), and pmap_copy() have optimizations for regions
larger than PMAP_TSB_THRESH (which works out to 16MB). This
caused a panic in tsb_foreach for kernel mappings, since
pm->pm_tsb is NULL in that case. This fix teaches tsb_foreach
to use the kernel's tsb in that case.
Submitted by: Michael Plass
MFC after: 3 days
Unfortunately, the QUEUE FULL event only tells you Bus && Target.
It doesn't tell you lun. In order for the XPT_REL_SIMQ action to
work, we have to have a real lun. But which one? For now, just
iterate over MPT_MAX_LUNS.
Practically speaking, this is only going to be happening for lower
quality SAS or SATA drives behind the SAS controller, which means
only lun 0, so it's not so bad.
Helpful Reminder Nagging from: John Baldwin, Fred Whiteside
MFC after: 5 days
of directory reading system calls.
Respell a mis-spelled event name.
Clean up white space/line wraps in a couple of places.
Assign event numbers to some new system call entries that have turned
up in the list since audit support was added.
Obtained from: TrustedBSD Project
returns the previous value that the "add" effected (In
this case we are adding -1), afterwhich we compare it
to '0'... to see if we free the mbuf... we should
be comparing it to '1'... Note that this only effects
when there is contention since there is a first part
to the comparison that checks to see if its '1'. So
this bug would only crop up if two CPU's are trying
to free the same mbuf refcount at the same time. This
will happen in SCTP but I doubt can happen in TCP or
UDP.
PR: N/A
Submitted by: rrs
Reviewed by: gnn,sam
Approved by: gnn,sam
of the chip to let ASF/IPMI firmware to respond to IPMI after attaching
and when the chip is down. David looked at it but could really say
what they right minimal config. stuff would be. It's not documented.
I figured this out via trial and error.
Reviewed by: davidch
behaves. This fixes a lot of test which failed before. For amd64 there
are still some problems, but without any testers which apply patches
and run some predefines tests we can't do more ATM.
Submitted by: Marcin Cieslak <saper@SYSTEM.PL> (minor fixups by myself)
Tested with: LTP
appears to be serving a useful purpose, as it was used during initial
development of MAC support for System V IPC.
MFC after: 1 month
Obtained from: TrustedBSD Project
Suggested by: Christopher dot Vance at SPARTA dot com
other problems while labels were first being added to various kernel
objects. They have outlived their usefulness.
MFC after: 1 month
Suggested by: Christopher dot Vance at SPARTA dot com
Obtained from: TrustedBSD Project
when allocating the record in the first place, allocate the final buffer
when closing the BSM record. At that point, more size information is
available, so a sufficiently large buffer can be allocated.
This allows the kernel to generate audit records in excess of
MAXAUDITDATA bytes, but is consistent with Solaris's behavior. This only
comes up when auditing command line arguments, in which case we presume
the administrator really does want the data as they have specified the
policy flag to gather them.
Obtained from: TrustedBSD Project
MFC after: 3 days
is incorrect, and causes endianness bugs on 64-bit big-endian
machines (sparc64), it's the best choice for now, as many of
these IOCTLs are used inside the kernel, and bogusly pass an
argument as "int *" which results in unaligned access panics
on sparc64 when attempting to dereference them via *(intptr_t *).
(Several of us are working on a real fix, which is uneasy.)
switch by worklist type contains two for() loops, for D_INDIRDEP and
D_PAGEDEP. On error, these loops are exited by break, where the switch
actually shall be leaved. Use goto instead of break to reach the error
handling code.
Reported by: Peter Holm
Reviewed by: tegge
Approved by: pjd (mentor)
MFC after: 2 weeks
code is still under giant lock, but the session/pgrp release code just used
proctree_locks. This explains why moving the proctree_lock in sys/kern/tty.c
rev. 1.258 did fix the panics in our SMP systems.
This should also fix some race panics with revoked ttys.
Reviewed by: jhb
MFC after: 1 week
and drop_dm_lock is true, no unlocking shall be attempted. The lock is
already dropped and memory is freed.
Found with: Coverity Prevent(tm)
CID: 1536
Approved by: pjd (mentor)
part of the hal distribution early on when the hal was built for
each os but it's been portable for a long time so move the os-specific
code out (and off the vendor branch)
o correct the copyright on ah_osdep.?; it was mistakenly given a
restricted license and not a dual-bsd/gpl license
o remove the module api definition as it was never used
o fixup include paths for move of ah_osdep.h
MFC after: 2 weeks
be recycled during the sleep, wrap the vn_lock with vhold/vdrop.
Check that coveredvp still points to the same mp after sleep (needed
because sleep dropped Giant).
Move check for user rights for unmount after coveredvp lock is obtained.
Tested by: Peter Holm
Reviewed by: tegge
Approved by: kan (mentor)
MFC after: 2 weeks
vnode lock in devfs_allocv. Do this by temporary dropping dm_lock around
vnode locking.
For safe operation, add hold counters for both devfs_mount and devfs_dirent,
and DE_DOOMED flag for devfs_dirent. The facilities allow to continue after
dropping of the dm_lock, by making sure that referenced memory does not
disappear.
Reviewed by: tegge
Tested by: kris
Approved by: kan (mentor)
PR: kern/102335
with other commonly used sysctl name spaces, rather than declaring them
all over the place.
MFC after: 1 month
Sponsored by: nCircle Network Security, Inc.
audit pipes. If the kernel record was not selected for the trail or the pipe,
any user supplied record attached to it would be tossed away, resulting in
otherwise selected events being lost.
- Introduce two new masks: AR_PRESELECT_USER_TRAIL AR_PRESELECT_USER_PIPE,
currently we have AR_PRESELECT_TRAIL and AR_PRESELECT_PIPE, which tells
the audit worker that we are interested in the kernel record, with
the additional masks we can determine if either the pipe or trail is
interested in seeing the kernel or user record.
- In audit(2), we unconditionally set the AR_PRESELECT_USER_TRAIL and
AR_PRESELECT_USER_PIPE masks under the assumption that userspace has
done the preselection [1].
Currently, there is work being done that allows the kernel to parse and
preselect user supplied records, so in the future preselection could occur
in either layer. But there is still a few details to work out here.
[1] At some point we need to teach au_preselect(3) about the interests of
all the individual audit pipes.
This is a RELENG_6 candidate.
Reviewed by: rwatson
Obtained from: TrustedBSD Project
MFC after: 1 week
m_pkthdr.ether_vlan. The presence of the M_VLANTAG flag on the mbuf
signifies the presence and validity of its content.
Drivers that support hardware VLAN tag stripping fill in the received
VLAN tag (containing both vlan and priority information) into the
ether_vtag mbuf packet header field:
m->m_pkthdr.ether_vtag = vlan_id; /* ntohs()? */
m->m_flags |= M_VLANTAG;
to mark the packet m with the specified VLAN tag.
On output the driver should check the mbuf for the M_VLANTAG flag to
see if a VLAN tag is present and valid:
if (m->m_flags & M_VLANTAG) {
... = m->m_pkthdr.ether_vtag; /* htons()? */
... pass tag to hardware ...
}
VLAN tags are stored in host byte order. Byte swapping may be necessary.
(Note: This driver conversion was mechanic and did not add or remove any
byte swapping in the drivers.)
Remove zone_mtag_vlan UMA zone and MTAG_VLAN definition. No more tag
memory allocation have to be done.
Reviewed by: thompsa, yar
Sponsored by: TCP/IP Optimization Fundraise 2005
unconfigured state of the kernel accounting system. This is used by
the accounting privilege regression test to determine whether
accounting is in use and will be disrupted by the regression test.
Sponsored by: nCircle Network Security, Inc.
Obtained from: TrustedBSD Project
MFC after: 1 month
- add support to power off the system [2]
- check the linux magic values [3]
Submitted by: Marcin Cieslak <saper@SYSTEM.PL> [1,2]
Modelled after: linux man page of the reboot() syscall [3]
Found by: LTP testcase "reboot02" [1]
Tested with: LTP testcase "reboot02" [1,3]
MFC after: 1 week
Use something like this:
route add -inet6 <dest_addr> <my_addr_on_that_interface> -interface -llinfo
This is usefull for wireless adhoc mesh networks.
MFC after: 5 days
of individual interfaces should match the ipackets/ibytes counter of
the aggregate (FEC) interface.
PR: kern/82189
Submitted by: Stikheev Andrew <sand AT zunet DOT ru>
MFC after: 3 days
- Added support for multicast filtering, now that the firmware
supports it. Note that this is not yet tested, as multicast
seems to panic -current (even w/o mxge loaded)
- Added workaround to cope with different irq data struct size on
pre-multicast firmware which can found running on nics.
- Added Intel E5000 PCIe chipsets to list providing aligned completions.
- Replaced various magic constants with #defines, now that they are
defined in the firmware headers.
trunk ports first. If that succeeds, and we're inside our own bounds,
so be it.
Still not ideal -- adding a port after changing an MTU doesn't change
port's MTU, but a step in the right direction.
PR: kern/95417
Submitted by: Vladimir Ivanov <wawa AT yandex-team DOT ru>
MFC after: 3 days
I've slightly edited a patch to make the conditional logic positive
and remove (what I think was) a redundant ng_fec_init() call.
are supposed to be set directly in ifnet already. This change fixes a
panic when ng_eiface node is attached to ng_fec node and the latter is
shut down (ng_fec sets flags and then calls SIOCSIFFLAGS with a NULL
argument).
MFC after: 3 days
in the transmit busdma tag, so I moved the segment list off the
stack.
- Fixed transmit routine to ensure it doesn't read past the end
of an mbuf when parsing headers.
- Corrected handling of odd length segments. Setting MXGEFW_FLAGS_ALIGN_ODD
is required only when offloading the checksum of that frame.
Sponsored by: Myricom Inc.
if_watchdog, etc., or in functions used only in these methods.
In all other functions in the driver use device_printf().
- Use __func__ instead of typing function name.
Submitted by: Alex Lyashkov <umka sevcity.net>
if_ioctl, if_watchdog, etc, or in functions that are used by
these methods only. In all other cases use device_printf().
This also fixes several panics, when if_printf() is called before
softc->ifp was initialized.
Submitted by: Alex Lyashkov <umka sevcity.net>
adds a FS type specific flag indicating that the FS supports shared
vnode lock lookups, adds some logic in vfs_lookup.c to test this flag
and set lock flags appropriately.
- amd on 6.x is a non-starter (without this change). Using amd under
heavy load results in a deadlock (with cascading vnode locks all the
way to the root) very quickly.
- This change should also fix the more general problem of cascading
vnode deadlocks when an NFS server goes down.
Ideally, we wouldn't need these changes, as enabling shared vnode lock
lookups globally would work. Unfortunately, UFS, for example isn't
ready for shared vnode lock lookups, crashing pretty quickly.
This change is the result of discussions with Stephan Uphoff (ups@).
Reviewed by: ups@
in syscons. This replaces a simple access semaphore that was assumed to be
protected by Giant but often was not. If two threads that were otherwise
SMP-safe called printf at the same time, there was a high likelyhood that
the semaphore would get corrupted and result in a permanently frozen video
console. This is similar to what is already done in the serial console
drivers.
protect the vnode, it was present to synchronize access to TTY session
information between exit(2) and the TTY code. While we are here, note that
Giant is required for TTY protection.
Clue from: bde
Discussed with: jhb
MFC after: 1 week
request can still have bio_to set to sc_provider (this is READ part of a
synchronization request) and in this case g_{mirror,raid3}_sync() wasn't
called as it should be.
MFC after: 1 week
functionality:
- Remove a rwlock aquisition/release per generated syncookie. Locking
is now integrated with the bucket row locking of syncache itself and
syncookies no longer add any additional lock overhead.
- Syncookie secrets are different for and stored per syncache buck row.
Secrets expire after 16 seconds and are reseeded on-demand.
- The computational overhead for syncookie generation and verification
is one MD5 hash computation as before.
- Syncache can be turned off and run with syncookies only by setting the
sysctl net.inet.tcp.syncookies_only=1.
This implementation extends the orginal idea and first implementation
of FreeBSD by using not only the initial sequence number field to store
information but also the timestamp field if present. This way we can
keep track of the entire state we need to know to recreate the session in
its original form. Almost all TCP speakers implement RFC1323 timestamps
these days. For those that do not we still have to live with the known
shortcomings of the ISN only SYN cookies. The use of the timestamp field
causes the timestamps to be randomized if syncookies are enabled.
The idea of SYN cookies is to encode and include all necessary information
about the connection setup state within the SYN-ACK we send back and thus
to get along without keeping any local state until the ACK to the SYN-ACK
arrives (if ever). Everything we need to know should be available from
the information we encoded in the SYN-ACK.
A detailed description of the inner working of the syncookies mechanism
is included in the comments in tcp_syncache.c.
Reviewed by: silby (slightly earlier version)
Sponsored by: TCP/IP Optimization Fundraise 2005
exists to allow the mandatory access control policy to properly initialize
mbufs generated by the firewall. An example where this might happen is keep
alive packets, or ICMP error packets in response to other packets.
This takes care of kernel panics associated with un-initialize mbuf labels
when the firewall generates packets.
[1] I modified this patch from it's original version, the initial patch
introduced a number of entry points which were programmatically
equivalent. So I introduced only one. Instead, we should leverage
mac_create_mbuf_netlayer() which is used for similar situations,
an example being icmp_error()
This will minimize the impact associated with the MFC
Submitted by: mlaier [1]
MFC after: 1 week
This is a RELENG_6 candidate
Instead, we want busses to explicitly specify an add_child routine if they
want to support identify routines, but by default disallow having outside
drivers add devices.
- Give smbus(4) an explicit bus_add_child() method.
Requested by: imp
- Change smbus_callback() to pass a void * rather than caddr_t.
- Change smbus_bread() to pass a pointer to the count and have it be an
in/out parameter. The input is the size of the buffer (same as before),
but on return it will contain the actual amount of data read back from
the bus. Note that this value may be larger than the input value. It
is up to the caller to treat this as an error if desired.
- Change the SMB_BREAD ioctl to write out the updated struct smbcmd which
will contain the actual number of bytes read in the 'count' field. To
preserve the previous ABI, the old ioctl value is mapped to SMB_OLD_BREAD
which doesn't copy the updated smbcmd back out to userland. I doubt anyone
actually used the old BREAD anyway as it was rediculous to do a bulk-read
but not tell the using program how much data was actually read.
- Make the smbus driver and devclass public in the smbus module and
push all the DRIVER_MODULE()'s for attaching the smbus driver to
various foosmb drivers out into the foosmb modules. This makes all
the foosmb logic centralized and allows new foosmb modules to be
self-contained w/o having to hack smbus.c everytime a new smbus driver
is added.
- Add a new SMB_EINVAL error bit and use it in place of EINVAL to return
an error for bad arguments (such as invalid counts for bread and bwrite).
- Map SMB bus error bits to EIO in smbus_error().
- Make the smbus driver call bus_generic_probe() and require child drivers
such as smb(4) to create device_t's via identify routines. Previously,
smbus just created one anonymous device during attach, and if you had
multiple drivers that could attach it was just random chance as to which
driver got to probe for the sole device_t first.
- Add a mutex to the smbus(4) softc and use it in place of dummy splhigh()
to protect the 'owner' field and perform necessary synchronization for
smbus_request_bus() and smbus_release_bus().
- Change the bread() and bwrite() methods of alpm(4), amdpm(4), and
viapm(4) to only perform a single transaction and not try to use a
loop of multiple transactions for a large request. The framing and
commands to use for a large transaction depend on the upper-layer
protocol (such as SSIF for IPMI over SMBus) from what I can tell, and the
smb(4) driver never allowed bulk read/writes of more than 32-bytes
anyway. The other smb drivers only performed single transactions.
- Fix buffer overflows in the bread() methods of ichsmb(4), alpm(4),
amdpm(4), amdsmb(4), intpm(4), and nfsmb(4).
- Use SMB_xxx errors in viapm(4).
- Destroy ichsmb(4)'s mutex after bus_generic_detach() to avoid problems
from child devices making smb upcalls that would use the mutex during
their detach methods.
MFC after: 1 week
Reviewed by: jmg (mostly)
pmap_invalidate_cache() in the SMP case so pmap_mapdev() in multiuser
doesn't panic with a trap 30. I broke this many months ago when I
added pmap_invalidate_cache() as early parts of the PAT work.
Patience from: jmg
Pointy hat: jhb
validity of ro->ro_rt first. This prevents crashing on any non-normally
routed IP packet.
Coverity CID: 162 (incorrectly, it was re-introduced by previous commit)
device_add_child_ordered(). Previously, a device driver that wanted to
add a new child device in its identify routine had to know if the parent
driver had a custom bus_add_child method and use BUS_ADD_CHILD() in that
case, otherwise use device_add_child(). Getting it wrong in either
direction would result in panics or failure to add the child device. Now,
BUS_ADD_CHILD() always works isolating child drivers from having to know
intimate details about the parent driver.
Discussed with: imp
MFC after: 1 week
for overlaps, but more importantly, it collapses adjacent free regions.
This is needed to cope with BIOSen that split up ports for system devices
(like IPMI controllers) across multiple system resource entries.
- Now that rman_manage_region() is not so dumb, remove extra logic in the
x86 nexus drivers to populate the IRQ rman that manually coalesced the
regions.
MFC after: 1 week
old/broken hardware. Unfortunately, it adds cache pressure and possible
mispredicted branches to the fast path of the bus_dmamap_load collection of
functions. Since it's meant for slow path exception processing, de-inline
it and allow its conditions to be pre-computed at tag_create time and thus
short-circuited at runtime.
While here, cut down on the size of _bus_dmamap_load_buffer() by pushing the
bounce page logic into a non-inlined function. Again, this helps with
cache pressure and mispredicted branches.
According to the TSC, this shaves off a few cycles on average. Unfortunately,
the data varies quite a bit due to interrupts and preemption, so it's hard to
get a good measurement. Real world measurements of network PPS are welcomed.
A merge to amd64 and other arches is pending more testing.
support a network w/ split mtu's by assigning each host route the correct
mtu. an aspiring programmer could write a daemon to probe hosts and find
out if they support a larger mtu.
inherit all settings and options except listen specific options.
Add the missing send/receive timeouts and low watermarks.
Remove inheritance of the field so_timeo which is unused.
Noticed by: phk
Reviewed by: rwatson
Sponsored by: TCP/IP Optimization Fundraise 2005
MFC after: 3 days
and opens a small race window before tp->t_session->s_leader is accessed. In case
tp->t_session has just been set to NULL elsewhere, we get a panic().
This fix is a bandaid until someone else fixes the whole locking in the tty subsystem.
Definitly more work needs to be done.
MFC after: 1 week
Reviewed by: mlaier
PR: kern/103101
This way GEOM classes can safely detach from provider when an orphan
event is received. This fixes 'detach with active requests' panic for
gstripe/gconcat under load.
PR: kern/102766
Submitted by: mjacob
OK'ed by: phk
MFC after: 1 week
add count of active and total components to the launched line so you can
see at a glance if your mirror/raid3 is complete...
now:
GEOM_MIRROR: Device mirror/sam launched (2/2).
Reviewed by: pjd
it was present only in the enable path, not the disable path, which one
presumes would be equally of interest. Either way, it was not needed,
as the sysctl framework already calls suser() if the operation is a
write operation, which configuration requests are.
Sponsored by: nCircle Network Security, Inc.
to it. Try to co-operate with the IPMI/ASF firmware accessing the PHY.
One we get link we don't mess with the PHY. If we do then over time
the NIC will go off line. It would be nice if we could tell if IPMI
was enabled on the chip but I can't figure out a reliable way to do
that. The scheme I tried worked on a Dell PE850 but not on an HP machine.
So we assume any NIC that has ASF capability needs to deal with it.
The code was inspired by the support in Linux from kernel.org and Broadcom.
Broadcom did give me some info. but it is rather limited and is mostly
just what is in the Linux driver. Thanks to the numerous people that
helped debug the many prior versions and that I didn't break other
bge(4) HW.
Reviewed by: several people
Tested by: even more
