before it can call VOP_INACTIVE(). This must use the EXCLUPGRADE path
because we may violate some lock order with another locked vnode if
we drop and reacquire the lock. If EXCLUPGRADE fails, we mark the
vnode with VI_OWEINACT. This case should be very rare.
- Clear VI_OWEINACT in vinactive() and vbusy().
- If VI_OWEINACT is set in vgone() do the VOP_INACTIVE call here as well.
Sponsored by: Isilon Systems, Inc.
necessary since we disable the shared locks in vfs_cache, but it is
prefered that the option not leak out into filesystems when it is
disabled.
Sponsored by: Isilon Systems, Inc.
config option have now been fixed. All filesystems are properly locked
and checked via DEBUG_VFS_LOCKS. Remove the workaround code.
Sponsored by: Isilon Systems, Inc.
last in the list rather than first.
This makes the resouces print in the 4.x order rather than the 5.x order
(eg fdc0 at 0x3f0-0x3f5,0x3f7 is 4.x, but 0x3f7,0x3f0-0x3f5 is 5.x). This
also means that the pci code will once again print the resources in BAR
ascending order.
w/o problems than I was before... This simply brings back the knote_delete
as knlist_delete which will also drop the knote's, instead of just clearing
the list and seeing _ONESHOT...
Fix a race where if a note was _INFLUX and _DETACHED, it could end up being
modified... whoopse..
MFC after: 1 week
Prodded by: ambrisko and dwhite
alignment restrictive, and help performance on some ethernet cards which
currently copy the entire packet a couple bytes to get the packet aligned
properly...
Wordsmithing by: dwhite
Obtained from: NetBSD (code only)
I'll clean it up later: rwatson
in the window between the beginning of panic() and entering the debugger,
it's possible to receive interrupts. If we receive an interrupt, don't
preempt if panicstr != NULL, as the system is in the process of failing, and
the preempting thread is likely to stumble over the failure. The typical
scenario is during the printf() in panic() prior to entering the debugger,
but when running with a slower console type such as serial console.
It could be that the panic string should be passed to the debugger to print,
so that it can run from the debugger's environment rather than a regular
kernel printf.
Glanced at by: jhb
session in tprintf(). SESSRELE() needs to properly dispose of the
sessions mutex.
Add sessrele() which does the proper cleanup and have SESSRELE() call it.
Use SESSRELE also in pgdelete().
Found by: Coverity (ID:526)
it to get better hashing in vfs_hash.
In case of an insert collision in vfs_hash_insert(), put the loosing vnode
on a special list so that vfs_hash_remove() can just assume that it is on
a list.
Drop the VI_HASHED flag.
instead of failing.
When looking for a region to allocate, we used to check to see if the
start address was < end. In the case where A..B is allocated already,
and one wants to allocate A..C (B < C), then this test would
improperly fail (which means we'd examine that region as a possible
one), and we'd return the region B+1..C+(B-A+1) rather than NULL.
Since C+(B-A+1) is necessarily larger than C (end argument), this is
incorrect behavior for rman_reserve_resource_bound().
The fix is to exclude those regions where r->r_start + count - 1 > end
rather than r->r_start > end. This bug has been in this code for a
very long time. I believe that all other tests against end are
correctly done.
This is why sio0 generated a message about interrupts not being
enabled properly for the device. When fdc had a bug that allocated
from 0x3f7 to 0x3fb, sio0 was then given 0x3fc-0x404 rather than the
0x3f8-0x3ff that it wanted. Now when fdc has the same bug, sio0 fails
to allocate its ports, which is the proper behavior. Since the probe
failed, we never saw the messed up resources reported.
I suspect that there are other places in the tree that have weird
looping or other odd work arounds to try to cope with the observed
weirdness this bug can introduce. These workarounds should be located
and eliminated.
Minor debug write fix to match the above test done as well.
'nice' by: mdodd
Sponsored by: timing solutions (http://www.timing.com/)
- Move VSHOULDBUSY, VSHOULDFREE, and VTRYRECYCLE into vfs_subr.c so
no one else attempts to grow a dependency on them.
- Now that objects with pages hold the vnode we don't have to do unlocked
checks for the page count in the vm object in VSHOULDFREE. These three
macros could simply check for holdcnt state transitions to determine
whether the vnode is on the free list already, but the extra safety
the flag affords us is probably worth the minimal cost.
- The leafonly sysctl and code have been dead for several years now,
remove the sysctl and the code that employed it from vtryrecycle().
- vtryrecycle() also no longer has to check the object's page count as
the object holds the vnode until it reaches 0.
Sponsored by: Isilon Systems, Inc.
to get from (mount + inode) to vnode. These tables are mostly
copy&pasted from UFS, sized based on desiredvnodes and therefore
quite large (128K-512K). Several filesystems are buggy enough that
they allocate the hash table even before they know if they will
ever be used or not.
Add "vfs_hash", a system wide hash table, which will replace all
the per-filesystem hash-tables.
The fields we add to struct vnode will more or less be saved in
the respective filesystems inodes.
Having one central implementation will save code and will allow us
to justify the complexity of code to dynamically (re)size the hash
at a later point.
to use only the holdcnt to determine whether a vnode may be recycled,
simplifying the V* macros as well as vtryrecycle(), etc.
Sponsored by: Isilon Systems, Inc.
vtryrecycle(). All obj refs also ref the vnode.
- Consistently use v_incr_usecount() to increment the usecount. This will
be more important later.
Sponsored by: Isilon Systems, Inc.
on an unlinked file. We can't know if this is the case until after we
have the lock.
- Lock the vnode in vn_close, many filesystems had code which was unsafe
without the lock held, and holding it greatly simplifies vgone().
- Adjust vn_lock() to check for the VI_DOOMED flag where appropriate.
Sponsored by: Isilon Systems, Inc.
- Add a vn_start_write/vn_finished_write around vlrureclaim so we don't do
writing ops without suspending. This could suspend the vlruproc which
should not be a problem under normal circumstances.
- Manually implement VMIGHTFREE in vlrureclaim as this was the only instance
where it was used.
- Acquire a lock before calling vgone() as it now requires it.
- Move the acquisition of the vnode interlock from vtryrecycle() to
getnewvnode() so that if it fails we don't drop and reacquire the
vnode_free_list_mtx.
- Check for a usecount or holdcount at the end of vtryrecycle() in case
someone grabbed a ref while we were recycling. Abort the recycle, and
on the final ref drop this vnode will be placed on the head of the free
list.
- Move the redundant VOP_INACTIVE protection code into the local
vinactive() routine to avoid code bloat.
- Keep the vnode lock held across calls to vgone() in several places.
- vgonel() no longer uses XLOCK, instead callers must hold an exclusive
vnode lock. The VI_DOOMED flag is set to allow other threads to detect
a vnode which is no longer valid. This flag is set until the last
reference is gone, and there are no chances for a new ref. vgonel()
holds this lock across the entire function, which greatly simplifies
logic.
_ Only vfree() in one place in vgone() not three.
- Adjust vget() to check the VI_DOOMED flag prior to waiting on the lock
in the LK_NOWAIT case. In other cases, check after we have slept and
acquired an exlusive lock. This will simulate the old vx_wait()
behavior.
Sponsored by: Isilon Systems, Inc.
