Before this change on every open da(4) driver read all mode pages to
use only one bit. It was done so to not depend on the list of pages
supported by the disk. But I've found that at least for SATL of LSI/
Broadcom HBAs with WD HDDs Power Condition mode page reading may take
significant amount of time, much more than any other mode page, that
visibly increased disk retaste time by GEOM.
Address that by using data returned by the first MODE SENSE request
to limit the following ones to only one (the first for now) mode page.
With the change simultaneous retaste of 39 SATA disks takes about 2.5s
instead of more than 4s before, and I no longer see "dareprobe" status
on GEOM event thread.
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
Allow projects based on the FreeBSD tree to append to _PRIVATELIBS
and _INTERNALLIBS by simply maintaining their own lists of
LOCAL_PRIVATELIBS and LOCAL_INTERNALLIBS, respectively.
Reviewed by: bdrewery
MFC after: 1 week
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D33901
In iflib_device_register(), the CTX_LOCK is acquired first and then
IFNET_WLOCK is acquired by ether_ifattach(). However, in netmap_hw_reg()
we do the opposite: IFNET_RLOCK is acquired first, and then CTX_LOCK
is acquired by iflib_netmap_register(). Fix this LOR issue by wrapping
the CTX_LOCK/UNLOCK calls in iflib_device_register with an additional
IFNET_WLOCK. This is safe since the IFNET_WLOCK is recursive.
MFC after: 1 month
This tiny change to the example makes devd capable of reacting to carp
status change events on VLAN interfaces.
Reported by: Thomas Steen Rasmussen (tykling) <thomas at gibfest.dk>
Buckets in an SMR-enabled zone can legitimately be tagged with
SMR_SEQ_INVALID. This effectively means that the zone destructor (if
any) was invoked on all items in the bucket, and the contained memory is
safe to reuse. If the first bucket in the full bucket list was tagged
this way, UMA would unnecessarily poll per-CPU state before attempting
to fetch a full bucket from the list.
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Previously we'd always print "out of swap space." This can be
misleading, as there are other reasons an OOM kill can be triggered. In
particular, it's entirely possible to trigger an OOM kill on a system
with plenty of free swap space.
Reviewed by: kib
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D33810
These configuration options were removed in commit dfe13344f5.
Some forthcoming work will update the UMA man page to describe its
current behaviour on NUMA systems.
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
The test tries to connect a socket to a closed port at 127.0.0.1. It
sets O_NONBLOCK on the socket first and expects to get EINPROGRESS from
connect(2), but this is not guaranteed, ECONNREFUSED is possible.
Handle both cases, and re-enable the test.
PR: 240621
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
The stack gap implementation is disabled by default now, so the test
passes.
This reverts commit dad71022bd.
PR: 259969
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
If an emulation uses those functions instead of set_config_value_node
or set_config_value, it allows the config values to get
overwritten. Introducing new functions is much more readable than
if else statements in the emulation code.
Reviewed by: khng
MFC after: 2 weeks
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D33770
Some guests or driver might depend on MTRR to work properly. E.g. the
nvidia gpu driver won't work without MTRR.
Reviewed by: markj
MFC after: 2 weeks
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D33333
It isn't needed and will cause problem when upgrading to a newer release.
Reviewed by: emaste
MFC after: 2 weeks
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D33878
The roundrobin pool stores its state in the rule, which could
potentially lead to invalid addresses being returned.
For example, thread A just executed PF_AINC(&rpool->counter) and
immediately afterwards thread B executes PF_ACPY(naddr, &rpool->counter)
(i.e. after the pf_match_addr() check of rpool->counter).
Lock the rpool with its own mutex to prevent these races. The
performance impact of this is expected to be low, as each rule has its
own lock, and the lock is also only relevant when state is being created
(so only for the initial packets of a connection, not for all traffic).
See also: https://redmine.pfsense.org/issues/12660
Reviewed by: glebius
MFC after: 3 weeks
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D33874
RX fencing allows the driver to know that any prior change to the RQs has
finished, e.g. when the RQs are disabled/enabled or the hashkey/indirection
table are changed, RX fencing is required.
Remove the previous 'sleep' workaround and add the real support for
RX fencing as the PF driver supports the MANA_FENCE_RQ request now (any
old PF driver not supporting the request won't be used in production).
MFC after: 2 weeks
Sponsored by: Microsoft
powerpc64le requires at minimum POWER8 hardware, so ISA 2.06 atomic
instructions are always available.
This isn't so for powerpc64 (BE), so isn't enabled by default there.
Add machine-optimized implementations for the following:
* atomic_testandset_int
* atomic_testandclear_int
* atomic_testandset_long
* atomic_testandclear_long
This fixes the build with ISA_206_ATOMICS enabled.
Add the associated atomic_testandset_32, atomic_testandclear_32, so
that ice(4) can potentially build.
IVs are not the size of keys as a general case. Most often they are
the size of a single block.
Reviewed by: imp
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D33885
- Use AES_XTS_IV_LEN instead of the key length as the IV length.
- Use G_ELI_IVKEYLEN as the size of the zeroed iv[] array in
g_eli_crypto_cipher() to match geli_io().
PR: 261172
Reported by: Malcolm Matalka <mmatalka@gmail.com>, mikael
Reviewed by: markj
Sponsored by: FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D33884
Requested by: kib
Reviewed by: brooks, imp, kib
Sponsored by: The University of Cambridge, Google Inc.
Differential Revision: https://reviews.freebsd.org/D33886
- Use ia32_freebsd4_* instead of ia32_*4.
- Use ia32_o* instead of ia32_*3.
Reviewed by: brooks, imp, kib
Sponsored by: The University of Cambridge, Google Inc.
Differential Revision: https://reviews.freebsd.org/D33882
This matches the recent renaming of struct freebsd4_ucontext.
Reviewed by: brooks, imp, kib
Sponsored by: The University of Cambridge, Google Inc.
Differential Revision: https://reviews.freebsd.org/D33880
The ACPI spec describes the FADT->Century field as:
The RTC CMOS RAM index to the century of data value (hundred and
thousand year decimals). If this field contains a zero, then the
RTC centenary feature is not supported. If this field has a non-zero
value, then this field contains an index into RTC RAM space that
OSPM can use to program the centenary field.
Use this field to decide whether to program the CENTURY register
of the CMOS RTC device.
Reviewed by: akumar3@isilon.com, dab, vangyzen
MFC after: 1 week
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D33667
MFC after: 1 week
Sponsored by: Dell EMC Isilon
GNU's libssp installed this (in addition to libssp_nonshared.a), but
the libc-based libssp does not.
Reviewed by: kevans, emaste
Fixes: cd0d51baaa Provide libssp based on libc
Sponsored by: The University of Cambridge, Google Inc.
Differential Revision: https://reviews.freebsd.org/D33852
Reviewed by: imp, emaste
Fixes: eb61f7bdf2 Stop building libl and liby
Sponsored by: The University of Cambridge, Google Inc.
Differential Revision: https://reviews.freebsd.org/D33851
If the last matching device entry partially matched in camperiphunit,
but then hit a continue case, we'd mistakenly think we had a match on
that entry. This lead to a number of problems downstream (usually a
belief that we had a duplicate wiring hint because unit = 0 is the
default). Fix this by using a for loop that does the assignment before
the loop termination test.
Sponsored by: Netflix
Reviewed by: jhb
Differential Revision: https://reviews.freebsd.org/D33873
Weird side of SES specification is that some bits have different
meaning or semantics in status and control pages. This patch fixes
non-zero writes into reserved fields, that caused errors on some
enclosures when trying to control locate/fault LEDs, keeping other
bits unchanged.
MFC after: 2 weeks
Sposonred by: iXsystems, Inc.
LRO was willing to merge ACK and non-ACK packets together. This
can cause incorrect th_ack values to be reported up the stack.
While non-ACKs are quite unlikely to appear in practice, LRO's
behaviour is against the spec. Make LRO unwilling to merge
packets with different TH_ACK flag values in order to fix the
issue.
Found by: Sysunit test
Differential Revision: https://reviews.freebsd.org/D33775
Reviewed by: rrs
To check if it needed to regenerate a packet's header before
sending it up the stack, LRO was checking if more than one payload
had been merged into the packet. This failed in the case where
a single payload was merged with one or more pure ACKs. This
results in lost ACKs.
Fix this by precisely tracking whether header regeneration is
required instead of using an incorrect heuristic.
Found with: Sysunit test
Differential Revision: https://reviews.freebsd.org/D33774
Reviewed by: rrs
The old bogus Xen versions that would deliver a GPF when writing to
the LAPIC MSR are likely retired, so it's safe to enable x2APIC
unconditionally now if available.
Tested by: avg
Reviewed by: kib
Sponsored by: Citrix Systems R&D
Differential revision: https://reviews.freebsd.org/D33877
If the UMA zones are not freed, we get warnings about re-using the
sysctl variables associated with the UMA zones, and we're leaking
the other memory associated with the zone structures. e.g.:
sysctl_warn_reuse: can't re-use a leaf (vm.uma.pass44.size)!
sysctl_warn_reuse: can't re-use a leaf (vm.uma.pass44.flags)!
sysctl_warn_reuse: can't re-use a leaf (vm.uma.pass44.bucket_size)!
sysctl_warn_reuse: can't re-use a leaf (vm.uma.pass44.bucket_size_max)!
sysctl_warn_reuse: can't re-use a leaf (vm.uma.pass44.keg.name)!
sysctl_warn_reuse: can't re-use a leaf (vm.uma.pass44.keg.rsize)!
sysctl_warn_reuse: can't re-use a leaf (vm.uma.pass44.keg.ppera)!
sysctl_warn_reuse: can't re-use a leaf (vm.uma.pass44.keg.ipers)!
Also, correctly clear the PASS_FLAG_ZONE_INPROG flag in
passcreatezone(). The way it was previously done, it would have
had set the flag and cleared all other flags that were set at
that point.
MFC after: 1 week
Sponsored by: Spectra Logic
When running as a Xen guest it's easier to use an hypercall in order
to do power management operations (power off, power cycle). Do this
for all supported guest types (HVM and PVH). Note that for HVM the
power operation could also be done using ACPI, but there's no reason
to differentiate between PVH and HVM.
While there fix the shutdown handler to properly differentiate between
power cycle and power off requests.
Reported by: Freddy DISSAUX
MFC: 1 week
Sponsored by: Citrix Systems R&D
It's sometimes easier to exclude some modules rather than listing all
possibly needed ones with MODULES_OVERRIDE.
So for this add MODULES_EXCLUDE which do exactly as one would guess, excludes
some modules from the build/install.
For example if one wants to exclude all modules which are only present in the
GENERIC config on amd64 :
export MODULES_EXCLUDE=$(grep -E '^device' sys/amd64/conf/GENERIC | awk '{print $2}' | tr '\n' ' ')
MFC after: 2 weeks
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D33443
Mark Milliard has detected a case of undefined behavior with the LLVM
UBSAN. The mandoc program called qsort with a==NULL and n==0, which is
allowed by the POSIX standard. The qsort() in FreeBSD did not attempt
to perform any accesses using the passed pointer for n==0, but it did
add an offset to the pointer value, which is undefined behavior in
case of a NULL pointer. This operation has no adverse effects on any
achitecture supported by FreeBSD, but could be caught in more strict
environments.
After some discussion in the freebsd-current mail list, it was
concluded that the case of a==NULL and n!=0 should still be caught by
UBSAN (or cause a program abort due to an illegal access) in order to
not hide errors in programs incorrectly invoking qsort().
Only the the case of a==NULL and n==0 should be fixed to not perform
the undefined operation on a NULL pointer.
This commit makes qsort() exit before reaching the point of
potentially undefined behvior for the case n==0, but does not test
the value of a, since the result will not depend on whether this
pointer is NULL or an actual pointer to an array if n==0.
The issue found by Mark Milliard in the whatis command has been
reported to the upstream (OpenBSD) and has already been patched
there.
MFC after: 1 week
- In mana_create_txq(), if test fails we must free some resources
as in all the other handling paths of this function.
- In mana_gd_read_cqe(), add warning log in case of CQE read
overflow, instead of failing silently.
- Fix error handling in mana_create_rxq() when
cq->gdma_id >= gc->max_num_cqs.
- In mana_init_port(), use the correct port index rather than 0.
- In mana_hwc_create_wq(), If allocating the DMA buffer fails,
mana_hwc_destroy_wq was called without previously storing the
pointer to the queue. In order to avoid leaking the pointer to
the queue, store it as soon as it is allocated.
MFC after: 2 weeks
Sponsored by: Microsoft
Currently when the HWC creation fails, the error handling is flawed,
e.g. if mana_hwc_create_channel() -> mana_hwc_establish_channel() fails,
the resources acquired in mana_hwc_init_queues() is not released.
Enhance mana_hwc_destroy_channel() to do the proper cleanup work and
call it accordingly.
MFC after: 2 weeks
Sponsored by: Microsoft
Missed issues in truss on at least armv7 and powerpcspe need to be
resolved before recommit.
This reverts commit 3889fb8af0.
This reverts commit 1544e0f5d1.
