Most of the routing tests create per-test VNET, making
it harder to repeat the failure with CLI tools.
Provide an additional route/nexthop data on failure.
Differential Revision: https://reviews.freebsd.org/D29957
Reviewed by: kp
MFC after: 2 weeks
Two of these tests now pass. Looking at Jenkins to find the first commit
where this behaviour changed indicates that
2fe5a79425 is the most likely cause.
Reviewed By: melifaro
Differential Revision: https://reviews.freebsd.org/D28886
They have been failing for 1.5 months and the patch to fix them is stuck
in review so mark them as XFAIL for now to get Jenkins back to green.
To be reverted when https://reviews.freebsd.org/D28886 (or similar) is
commited.
Reviewed By: kp
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D29528
Traditionally routing socket code did almost zero checks on
the input message except for the most basic size checks.
This resulted in the unclear KPI boundary for the routing system code
(`rtrequest*` and now `rib_action()`) w.r.t message validness.
Multiple potential problems and nuances exists:
* Host bits in RTAX_DST sockaddr. Existing applications do send prefixes
with hostbits uncleared. Even `route(8)` does this, as they hope the kernel
would do the job of fixing it. Code inside `rib_action()` needs to handle
it on its own (see `rt_maskedcopy()` ugly hack).
* There are multiple way of adding the host route: it can be DST without
netmask or DST with /32(/128) netmask. Also, RTF_HOST has to be set correspondingly.
Currently, these 2 options create 2 DIFFERENT routes in the kernel.
* no sockaddr length/content checking for the "secondary" fields exists: nothing
stops rtsock application to send sockaddr_in with length of 25 (instead of 16).
Kernel will accept it, install to RIB as is and propagate to all rtsock consumers,
potentially triggering bugs in their code. Same goes for sin_port, sin_zero, etc.
The goal of this change is to make rtsock verify all sockaddr and prefix consistency.
Said differently, `rib_action()` or internals should NOT require to change any of the
sockaddrs supplied by `rt_addrinfo` structure due to incorrectness.
To be more specific, this change implements the following:
* sockaddr cleanup/validation check is added immediately after getting sockaddrs from rtm.
* Per-family dst/netmask checks clears host bits in dst and zeros all dst/netmask "secondary" fields.
* The same netmask checking code converts /32(/128) netmasks to "host" route case
(NULL netmask, RTF_HOST), removing the dualism.
* Instead of allowing ANY "known" sockaddr families (0<..<AF_MAX), allow only actually
supported ones (inet, inet6, link).
* Automatically convert `sockaddr_sdl` (AF_LINK) gateways to
`sockaddr_sdl_short`.
Reported by: Guy Yur <guyyur at gmail.com>
Reviewed By: donner
Differential Revision: https://reviews.freebsd.org/D28668
MFC after: 3 days
rtinit[1]() is a function used to add or remove interface address prefix routes,
similar to ifa_maintain_loopback_route().
It was intended to be family-agnostic. There is a problem with this approach
in reality.
1) IPv6 code does not use it for the ifa routes. There is a separate layer,
nd6_prelist_(), providing interface for maintaining interface routes. Its part,
responsible for the actual route table interaction, mimics rtenty() code.
2) rtinit tries to combine multiple actions in the same function: constructing
proper route attributes and handling iterations over multiple fibs, for the
non-zero net.add_addr_allfibs use case. It notably increases the code complexity.
3) dstaddr handling. flags parameter re-uses RTF_ flags. As there is no special flag
for p2p connections, host routes and p2p routes are handled in the same way.
Additionally, mapping IFA flags to RTF flags makes the interface pretty messy.
It make rtinit() to clash with ifa_mainain_loopback_route() for IPV4 interface
aliases.
4) rtinit() is the last customer passing non-masked prefixes to rib_action(),
complicating rib_action() implementation.
5) rtinit() coupled ifa announce/withdrawal notifications, producing "false positive"
ifa messages in certain corner cases.
To address all these points, the following has been done:
* rtinit() has been split into multiple functions:
- Route attribute construction were moved to the per-address-family functions,
dealing with (2), (3) and (4).
- funnction providing net.add_addr_allfibs handling and route rtsock notificaions
is the new routing table inteface.
- rtsock ifa notificaion has been moved out as well. resulting set of funcion are only
responsible for the actual route notifications.
Side effects:
* /32 alias does not result in interface routes (/32 route and "host" route)
* RTF_PINNED is now set for IPv6 prefixes corresponding to the interface addresses
Differential revision: https://reviews.freebsd.org/D28186
Nexthop lookup was not consireding rt_flags when doing
structure comparison, which lead to an original nexthop
selection when changing flags. Fix the case by adding
rt_flags field into comparison and rearranging nhop_priv
fields to allow for efficient matching.
Fix `route change X/Y flags` case - recent changes
disallowed specifying RTF_GATEWAY flag without actual gateway.
It turns out, route(8) fills in RTF_GATEWAY by default, unless
-interface flag is specified. Fix regression by clearing
RTF_GATEWAY flag instead of failing.
Fix route flag reporting in RTM_CHANGE messages by explicitly
updating rtm_flags after operation competion.
Add IPv4/IPv6 tests for flag-only route changes.
The current default is provided in various Makefile.inc in some top-level
directories and covers a good portion of the tree, but doesn't cover parts
of the build a little deeper (e.g. libcasper).
Provide a default in src.sys.mk and set WARNS to it in bsd.sys.mk if that
variable is defined. This lets us relatively cleanly provide a default WARNS
no matter where you're building in the src tree without breaking things
outside of the tree.
Crunchgen has been updated as a bootstrap tool to work on this change
because it needs r365605 at a minimum to succeed. The cleanup necessary to
successfully walk over this change on WITHOUT_CLEAN builds has been added.
There is a supplemental project to this to list all of the warnings that are
encountered when the environment has WARNS=6 NO_WERROR=yes:
https://warns.kevans.dev -- this project will hopefully eventually go away
in favor of CI doing a much better job than it.
Reviewed by: emaste, brooks, ngie (all earlier version)
Reviewed by: emaste, arichardson (depend-cleanup.sh change)
Differential Revision: https://reviews.freebsd.org/D26455
RTF_HOST indicates whether route is a host route
(netmask is empty or /{32,128}).
Check that if netmask is empty and host route is not specified, kernel
returns an error.
Differential Revision: https://reviews.freebsd.org/D26155
This fixes possible link errors, similar to:
ld: error: undefined symbol: iface_setup_addr
>>> referenced by test_rtsock_l3.c:111 (tests/sys/net/routing/test_rtsock_l3.c:111)
>>> test_rtsock_l3.o:(presetup_ipv4)
>>> referenced by test_rtsock_l3.c:79 (tests/sys/net/routing/test_rtsock_l3.c:79)
>>> test_rtsock_l3.o:(presetup_ipv6)
>>> referenced by test_rtsock_l3.c:512 (tests/sys/net/routing/test_rtsock_l3.c:512)
>>> test_rtsock_l3.o:(atfu_rtm_change_v4_gw_success_body)
>>> referenced 10 more times
In C (not C++), 'naked' inline is almost always a mistake. Either use
static inline (this is appropriate for most cases), or extern inline.
MFC after: 3 days
Many rtsock tests verify the ordering of the kernel messages for the
particular event. In order to avoid flaky tests due to the other tests
running, switch all tests to use personal vnet-enabled jails.
This removes all clashes on the IP addresses and brings back the ability
to run these tests simultaneously.
Reported by: olivier
Reviewed by: olivier
Differential Revision: https://reviews.freebsd.org/D24182
The routing subdirectory installed into the same directory as the test tests,
which caused them to overwrite the net Kyuafile. As a result these tests were
not executed.
X-MFC-With: r356146
Redirect (and temporal) route expiration was broken a while ago.
This change brings route expiration back, with unified IPv4/IPv6 handling code.
It introduces net.inet.icmp.redirtimeout sysctl, allowing to set
an expiration time for redirected routes. It defaults to 10 minutes,
analogues with net.inet6.icmp6.redirtimeout.
Implementation uses separate file, route_temporal.c, as route.c is already
bloated with tons of different functions.
Internally, expiration is implemented as an per-rnh callout scheduled when
route with non-zero rt_expire time is added or rt_expire is changed.
It does not add any overhead when no temporal routes are present.
Callout traverses entire routing tree under wlock, scheduling expired routes
for deletion and calculating the next time it needs to be run. The rationale
for such implemention is the following: typically workloads requiring large
amount of routes have redirects turned off already, while the systems with
small amount of routes will not inhibit large overhead during tree traversal.
This changes also fixes netstat -rn display of route expiration time, which
has been broken since the conversion from kread() to sysctl.
Reviewed by: bz
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D23075