interp_has_builtin_cmd() will try to lookup the passed in command and
returns true if it was found, false otherwise.
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D36364
Factor out interp_lookup_cmd to search for a command from
interp_builtin_cmd. This simplifies the latter and can be used to expand
lua to ask if a command exists.
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D36363
All of the archsw fmtdev functions treat DEVT_DISK as a call to
disk_fmtdev. Set all disks' dv_fmtdev to disk_fmtdev so devformat
will return the same thing.
Sponsored by: Netflix
Reviewed by: tsoome (prior version)
Differential Revision: https://reviews.freebsd.org/D35917
We do a number of games with ploymorphism for different types struct
*devdesc. Adjust one place that this affects to take the address of the
base class (most others have void * at the moment). This is more type
safe than a bare void *.
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D35914
Since both EFI and the future kboot will benefit from a 'quit' command,
move it from efi/loader/main.c to common/commands.c. In EFI this command
exits back to the boot loader (which will cause the next BootXXXX in the
BootOrder list to be attempted). In kboot, this will exit back to
whatever called loader.kboot. In uboot this will cause a reset (which
will restart uboot, not quite a simple exit, but will look similar)
and in OFW it will execute OF_exit which should return to the
openfirmware prompt.
Sponsored by: Netflix
dv_cleanup is specified almost everywhere. Use nullsys instead of NULL
to indicate 'do nothing'. Also, be consistent in trailing commas that
were missing before.
Sponsored by: Netflix
Reviewed by: tsoome
Differential Revision: https://reviews.freebsd.org/D35913
The check fails in kernels compiled with KASAN because AddressSanitizer
inserts redzones around global variables, so the size of the "kernphys"
symbol is 32 rather than 8. Thus we fall back to copying even though
it's not necessary.
Simply remove the size check. I didn't want to extend the symbol size
check since there's no guarantee that AddressSanitizer will always emit
32 bytes for "kernphys".
Reviewed by: kib
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D35448
If module_verbose is set to a value below MODULE_VERBOSE_TWIDDLE
call twiddle_divisor(UINT_MAX).
This makes more sense here than when we are loading the kernel.
Sponsored by: Juniper Networks, Inc.
Set module_verbose to control the printing of information
about loaded modules and kernel:
0 MODULE_VERBOSE_SILENT None
1 MODULE_VERBOSE_SIZE Pathname and size
2 MODULE_VERBOSE_TWIDDLE as for 1 but also twiddle for progress
3 MODULE_VERBOSE_FULL extra detail
When the loader is verifying modules we already have a
running indication of progress and module_verbose=0 makes sense.
Reviewed by: rpokala
Differential Revision: https://reviews.freebsd.org/D34245
This helps mesuring what's happening when we load the kernel/modules/mfsroot.
This also adds TSENTER2 which uses the third argument of TSRAW, same
as in the kernel.
MFC after: 2 weeks
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D33699
shadow FB size could be rather large and depends on resolution,
instead of using heap, allocate dedicated space outside of heap.
Reviewed by: manu
Differential Revision: https://reviews.freebsd.org/D33600
MFC after: 2 weeks
Use %j to it works on 64 and 32 bits system.
Reviewed by: imp, tsoome
MFC after: 2 weeks
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D33430
When we load an ELF file (kernel or module) we do seek(2) a lot to
parse/load the different sections of the ELF file.
Protocol like TFTP suffers a lot from this as there is no resume or
a way to start the tranfer from a specified offset in the file.
fs_preload is added to help those protocol.
Call preload just after opening the ELF file that we need to load so
the underlying method can cache the hole file and then read/lseek operations
are faster.
Reviewed by: imp
MFC after: 2 weeks
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D33409
readtest will simply load the file in memory, useful for timing
loading on some filesystems.
Reviewed by: tsoome
MFC after: 2 weeks
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D33411
All these files are the same, modulo one comment. Move them all into
common/gfx_fb_stub.c and adjust Makefiles accordingly.
Sponsored by: Netflix
Reviewed by: manu
Differential Revision: https://reviews.freebsd.org/D33428
Store whether or not we found a vbefb module (eg, a tg supported kernel)
in the preloaded_file structure. This automatically resets on reload and
eliminates load_elf knowing about any gfx_* interface. Restrict this to
i386, which is the only place it's used. Update libi386 to check in the
preloaded_file struct. Eliminate this from the teken_gfx
structure. Rewrite the parsing code to be more inline. Check this from
the same place we check for a relocatable amd64 kernel.
Sponsored by: Netflix
Reviewed by: manu, tsoome
Differential Revision: https://reviews.freebsd.org/D33427
Reading from Write Combining memory can be very-very slow. Try to use
shadow buffer to avoid such reads.
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D33305
As part of decommissioning mips support, remove the boot loader
support. Do this in advance of other boot loader work to limit the
amount of work that will be thrown away.
Sponsored by: Netflix
Reviewed by: jrtc27
Differential Revision: https://reviews.freebsd.org/D33377
Add ofwbus, iicbus and spibus to pnpautoload so modules under those
buses will be loaded.
On my rockpro64 now :
OK pnpautoload -v
Autoloading modules for simplebus
Using DTB provided by EFI at 0x8100000.
Autoloading modules for ofwbus
/boot/kernel/rk_spi.ko text=0x14b2 text=0xd4c data=0x4d0+0x8 syms=[0x8+0xa98+0x8+0x807]
/boot/kernel/dwwdt.ko text=0x12e2 text=0x78c data=0x4c8+0x10 syms=[0x8+0x990+0x8+0x6e1]
Autoloading modules for iicbus
Autoloading modules for spibus
/boot/kernel/mx25l.ko text=0x1613 text=0x114c data=0x6e8+0x8 syms=[0x8+0xa08+0x8+0x665]
loading required module 'fdt_slicer'
/boot/kernel/fdt_slicer.ko text=0x95e text=0x340 data=0x290 syms=[0x8+0x6c0+0x8+0x4a0]
Turn the presence or absence of boot services into a positive bool (and
change its type to bool). Move declaration to efi.h in the global
variables section.
Sponsored by: Netflix
Reviewed by: tsoome, kib
Differential Revision: https://reviews.freebsd.org/D31814
Fix boot1 and loader on PowerPC64 little-endian (LE).
Due to endian issues, boot1 couldn't find the UFS boot partition
and loader wasn't able to load the kernel. Most of the issues
happened because boot1 and loader were BE binaries trying to access
LE UFS partitions and because loader expects the kernel ELF image
to use the same endian as itself.
To fix these issues, boot1 and loader are now built as LE binaries
on PPC64LE. To support this, the functions that call OpenFirmware
were enhanced to correctly perform endian conversion on its input
and output arguments and to change the CPU into BE mode before
making the calls, as OpenFirmware always runs in BE. Besides that,
some other small fixes were needed.
Submitted by: bdragon (initial version)
Reviewed by: alfredo, jhibbits
Sponsored by: Instituto de Pesquisas Eldorado (eldorado.org.br)
Differential Revision: https://reviews.freebsd.org/D32160
net_open() does replace f_devdata with pointer to netdev_sock,
this will cause memory leak when device is closed, but also does
alter the devopen() logic.
We should store &netdev_sock to dev->d_opendata instead, this
would preserve and follow the devopen() logic.
Fixes network boot on aarch64 (tested by bz).
Reviewed-by: imp
MFC After: 2 weeks
Differential Revision: https://reviews.freebsd.org/D32227
Prior to this commit, the loader would perform readaheads of up to
128 kB; when booting on a UFS filesystem this resulted in a series
of 160 kB reads (32 kB request + 128 kB readahead).
This commit allows readaheads to be longer, subject to a total I/O
size limit of 256 kB; i.e. 32 kB read requests will have added
readaheads of up to 224 kB.
In my testing on an EC2 c5.xlarge instance, this change reduces the
boot time by roughly 80 ms.
Reviewed by: tsoome
MFC after: 1 week
Sponsored by: https://www.patreon.com/cperciva
Differential Revision: https://reviews.freebsd.org/D32251
The loader bcache attempts to determine whether readahead is useful,
increasing or decreasing its readahead length based on whether a
read could be serviced out of the cache. This resulted in two
unfortunate behaviours:
1. A series of consecutive 32 kB reads are requested and bcache
performs 16 kB readaheads. For each read, bcache determines that,
since only the first 16 kB is already in the cache, the readahead
was not useful, and keeps the readahead at the minimum (16 kB) level.
2. A series of consecutive 32 kB reads are requested and bcache
starts with a 32 kB readahead resulting in a 64 kB being read on
the first request. The second 32 kB request can be serviced out of
the cache, and bcache responds by doubling its readahead length to
64 kB. The third 32 kB request cannot be serviced out of the cache,
and bcache reduces its readahead length back down to 32 kB.
The first syndrome converts a series of 32 kB reads into a series of
(misaligned) 32 kB reads, while the second syndrome converts a series
of 32 kB reads into a series of 64 kB reads; in both cases we do not
increase the readahead length to its limit (currently 128 kB) no
matter how many consecutive read requests are made.
This change avoids this problem by tracking the "unconsumed
readahead" length; readahead is deemed to be useful (and the
read-ahead length is potentially increased) not only if a request was
completely serviced out of the cache, but also if *any* of the request
was serviced out of the cache and that length matches the amount of
unconsumed readahead. Conversely, we now only reduce the readahead
length in cases where there was unconsumed readahead data.
In my testing on an EC2 c5.xlarge instance, this change reduces the
boot time by roughly 120 ms.
Reviewed by: imp, tsoome
MFC after: 1 week
Sponsored by: https://patreon.com/cperciva
Differential Revision: https://reviews.freebsd.org/D32250
Booting FreeBSD on an EC2 c5.xlarge instance, the loader "twiddles"
810 times over the course of 510 ms, a rate of 1.59 kHz. Even accepting
that many systems are slower than this particular VM and will take
longer to boot (especially if using spinning-rust disks), this seems
like an unhelpfully large amount of twiddling when compared to the
~60 Hz frame rate of many displays; printing the twiddles also consumes
roughly 10% of the boot time on the aforementioned VM.
Setting the default globaldiv to 16 dramatically reduces the time spent
printing twiddles to the console while still twiddling at roughly 100
Hz; this should be ample even for systems which take longer to boot and
consequently twiddle slower.
Note that this can adjusted via the twiddle_divisor variable in
loader.conf, but that file is not processed until nearly halfway
through the loader's runtime.
Reviewed by: allanjude, jrtc27, kevans
MFC after: 1 week
Sponsored by: https://www.patreon.com/cperciva
Differential Revision: <https://reviews.freebsd.org/D32163>
We want to keep our root file system open to preserve bcache segment
between file accesses, thus reducing physical disk IO.
Reviewed by: imp, allanjude, kevans (previous version)
Differential Revision: https://reviews.freebsd.org/D30848
MFC after: 1 month
When Boot Services (BS) are switched off, we can not use BS
functions any more. Since drawn console does implement our own
Blt(), we can use it to draw the console.
However, SimpleTextOutput protocol based console output must be
blocked.
Tested by inserting printf() after ExitBootServices() call.
MFC after: 1 week
When we quit pager, the return value 1 is returned and command_more()
interprets it as error.
when lua loader gets error from command, it will try to
interpret it once more, so we get the same file shown once more.
There is no reason why we should return error from command_more().
MFC after: 1 week
Scrolling screen will leave "trail" of chars from first column.
Apparently caused by cursor location mismanagement.
Make sure we do not [attempt to] set cursor out of the screen.
MFC after: 1 week
The change makes block caching algorithm to work better for remote
media on low-BW/high-delay links.
This cuts boot time over IP KVMs noticeably, since the initialization
stage reads bunch of small 4th (and now lua) files that are not in
the same cache stripe (usually), thus wasting lot of bandwidth and
increasing latency even further.
The original regression came in 2017 with revision 87ed2b7f5. We've
seen increase of time it takes for the loader to get to the kernel
loading from under a minute to 10-15 minutes in many cases.
Reviewed by: tsoome
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D31623
The Xen kernel has no symbol tables, so calling lookup_symbol against
it triggers the following Divide by Zero fault:
Loading Xen kernel...
/boot/xen data=0x2809c8+0x149638 |
!!!! X64 Exception Type - 00(#DE - Divide Error) CPU Apic ID - 00000000 !!!!
Fix lookup_symbol to prevent the #DE fault from happening if the
symbol table is not loaded and also fix loadfile_raw to mark multiboot
kernels as relocatable, since the only multiboot kernel supported is
Xen and was already unconditionally booted as relocatable.
Fixes: f75caed644 ('amd64 UEFI loader: stop copying staging area to 2M physical')
Reviewed by: imp, kib
Differential Revision: https://reviews.freebsd.org/D31507
On amd64, add a possibility to activate kernel with staging area in place.
Add 'copy_staging' command to control this. For now, by default the
old mode of copying kernel to 2M phys is retained. It is going to be
changed in several weeks.
On amd64, add some slop to the staging area to satisfy both requirements
of the kernel startup allocator, and to have space for minor staging data
increase after the final size is calculated. Add a new command
'staging_slop' to control its size.
Improve staging area resizing, in particular, reallocate it anew if
we cannot grow it neither down nor up.
Reviewed by: kevans, markj
Discussed with: emaste (the delivery plan)
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D31121
The current code bumps lastaddr twice for the symbol table
location. However, the first bump is bogus and results in wasted
space. Remove it.
PR: 110995
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D31017
In my initial testing, these are the functions which showed up as
being worth instrumenting. More may be added later.
common/console.c: cons_probe
common/gfx_fb.c: read_list, insert_font, autoload_font
common/interp.c: interact
common/interp_lua.c: interp_init, interp_run
efi/libefi/efipart.c: efipart_readwrite
i386/libi386/biosdisk.c: bd_init, bd_open, bd_edd_io, bd_chs_io, bd_io
libsa/open.c: open
libsa/read.c: read
libsa/twiddle.c: twiddle
Note that profiling interp_run may be of questionable utility as it
may depend on user behaviour (e.g. pressing keys).
Reviewed by: kevans (earlier version)