shell command are stored in exec*()'s demand-paged string buffer. For
a "buildworld" on an 8GB amd64 multiprocessor, the new order reduces
the number of global TLB shootdowns by 31%. It also eliminates about
330k page faults on the kernel address space.
Change exec_shell_imgact() to use "args->begin_argv" consistently as
the start of the argument and environment strings. Previously, it
would sometimes use "args->buf", which is the start of the overall
buffer, but no longer the start of the argument and environment
strings. While I'm here, eliminate unnecessary passing of "&length"
to copystr(), where we don't actually care about the length of the
copied string.
Clean up the initialization of the exec map. In particular, use the
correct size for an entry, and express that size in the same way that
is used when an entry is allocated. The old size was one page too
large. (This discrepancy originated in 2004 when I rewrote
exec_map_first_page() to use sf_buf_alloc() instead of the exec map
for mapping the first page of the executable.)
Reviewed by: kib
The changes do not affect FreeBSD code because
zfs_znode_move(), cleanlocks() and cleanshares() are not used.
OpenSolaris onnv changeset: 9788:f660bc44f2e8, 9909:aa280f585a3e
Approved by: pjd, delphij (mentor)
Obtained from: OpenSolaris (Bug ID 6843700, 6790232)
MFC after: 7 weeks
- Set the external pin to interrupt in bus_setup_intr
- Implement bus_config_intr for external interrupts
- Extend arm_{,un}mask_irq to work with external interrupts
Approved by: imp (mentor)
module that can be used by both the regular and experimental nfs
clients. This fixes the problem reported by jh@ where /dev/nfslock
would be registered twice when both nfs clients were used.
I also defined the size of the lm_fh field to be the correct value,
as it should be the maximum size of an NFSv3 file handle.
Reviewed by: jh
MFC after: 2 weeks
This is similar to a fix in r189305 but for earlier ICH versions (<= 5).
Reported by: someone via attilio
Discussed with: des, attilio
MFC after: 1 week
tail pointers of the tx and rx queues. We needed a SYSCTL_PROC
to correctly get the values at run time.
Submitted by: Andrew Boyer aboyer at averesystems.com
MFC after: 1 week
OpenSolaris freemem has the same meaning as our v_free_count +
v_cache_count.
Obtained from: Artem Belevich <fbsdlist@src.cx>,
Peter Jeremy <peterjeremy@acm.org>
Discussed with: pjd
MFC after: 2 weeks
Current code doesn't check size of elf sections and may perform needless
actions of zero-sized memory allocation and similar.
The bigger issue is that alignment requirement of a zero-sized section
gets effectively applied to the next section if it has smaller alignment
requirement. But other tools, like gdb and consequently kgdb,
completely ignore zero-sized sections and thus may map symbols to
addresses differently.
Zero-sized sections are not typical in general.
Their typical (only, even) cause in FreeBSD modules is inline assembly that
creates custom sections which is found in pcpu.h and vnet.h. Mere inclusion
of one of those header files produces a custom section in elf output.
If there is no actual use for the section in a given module, then the
section remains empty.
Better solution is to avoid creating zero-sized sections altogether,
which is in plans.
Preloaded modules are handled in boot code (load_elf_obj.c), while
dynamically loaded modules are handled by kernel (link_elf_obj.c).
Based on code by: np
MFC after: 3 weeks
At present the cpufreq sysctl handler for current level setting would
allocate and deallocate a temporary buffer of 24KB even to handle a
read-only query. This puts unnecessary load on memory subsystem when
current level is checked frequently, e.g. when the likes of powerd
and system monitoring software are running.
Change the strategy to allocating a long-lived buffer for handling the
requests.
Reviewed by: njl
MFC after: 2 weeks
The aeskeys_{amd64,i386}.S content was mostly obtained from OpenBSD,
no objections to the license from core.
Hardware provided by: Sentex Communications
Tested by: fabient, pho (previous versions)
MFC after: 1 month
- fixes panics when Solaris/OpenSolaris pools that contain files
uploaded with the SMB protocol are accessed
Enable seting/unsetting the sharesmb property (dummy action)
- allows users who import pools from Solaris/Opensolaris to unset
the sharesmb property and get rid of annoying messages
PR: kern/145778, kern/148709
Approved by: pjd, delphij (mentor)
MFC after: 7 weeks
The device virtual addresses are now able to be allocated at runtime rather
than from the static pmap_devmap at boot. The only exception is memory
required before we have had a chance to dynamically allocate it.
While here reduce the space between the statically allocated devices by
reducing the distance between the virtual addresses.
Approved by: imp (mentor)
out that "on amd64, libstand.a is compiled for i386, but is still installed
under ${WORLDTMP}/usr/lib instead of ${WORLDTMP}/usr/lib32. Even if it
would be installed there, ld on amd64 is set up incorrectly with a
${TOOLS_PREFIX}/usr/lib/i386 default path, so it wouldn't link. The reason
it does link under gcc is that gcc passes -L${WORLDTMP}/usr/lib twice,
even for -m32 builds, which is also incorrect, but accidentally works in
this case."
Submitted by: Dimitry Andric <dimitry at andric.com>
taskqueues, more than one task can be running simultaneously.
Also make taskqueue_run(9) static to the file, since there are no
consumers in the base kernel and the function signature needs to change
with this fix.
Remove mention of taskqueue_run(9) and taskqueue_run_fast(9) from the
taskqueue(9) man page.
Reviewed by: jhb
Approved by: zml (mentor)
name of 32bit sibling architecture instead of the host one. Do the
same for hw.machine on amd64.
Add a safety belt debug.adaptive_machine_arch sysctl, to turn the
substitution off.
Reviewed by: jhb, nwhitehorn
MFC after: 2 weeks
This version adds support for ARC1880; additionally this version fixed
an issue where all devices on a SAS port gets offlined when any device
failed on the port [1].
Many thanks to Areca for continuing to support FreeBSD.
PR: kern/148502 [1]
Submitted by: Ching-Lung Huang <ching2048 areca com tw>
Obtained from: Areca
Tested by: Rich Ercolani <rercola acm jhu edu> [1]
MFC after: 2 weeks
working anymore. In addition more checks and operations were missing.
In case lla_lookup results in a match, get the ifaddr to update the
statistics counters, and check that the address is neither tentative,
duplicate or otherwise invalid before accepting the packet. If ok,
record the address information in the mbuf. [ as is done in case
lla_lookup does not return a result and we go through the FIB ].
Reported by: remko
Tested by: remko
MFC after: 2 weeks
is not defined at all because KTR_GEN is still a valid class and some
traces may fit in. Default to 0, instead, and block any tracing.
As long as this is a POLA violation (some thirdy-part code, even if
that may be a questionable choice, could be rely on that feature) a
MFC possibility might be carefully evaluated.
Sponsored by: Sandvine Incorporated
alc@.
The UMA zone based allocation is replaced by a scheme that creates
a new free page list for the KSEG0 region, and a new function
in sys/vm that allocates pages from a specific free page list.
This also fixes a race condition introduced by the UMA based page table
page allocation code. Dropping the page queue and pmap locks before
the call to uma_zfree, and re-acquiring them afterwards will introduce
a race condtion(noted by alc@).
The changes are :
- Revert the earlier changes in MIPS pmap.c that added UMA zone for
page table pages.
- Add a new freelist VM_FREELIST_HIGHMEM to MIPS vmparam.h for memory that
is not directly mapped (in 32bit kernel). Normal page allocations will first
try the HIGHMEM freelist and then the default(direct mapped) freelist.
- Add a new function 'vm_page_t vm_page_alloc_freelist(int flind, int
order, int req)' to vm/vm_page.c to allocate a page from a specified
freelist. The MIPS page table pages will be allocated using this function
from the freelist containing direct mapped pages.
- Move the page initialization code from vm_phys_alloc_contig() to a
new function vm_page_alloc_init(), and use this function to initialize
pages in vm_page_alloc_freelist() too.
- Split the function vm_phys_alloc_pages(int pool, int order) to create
vm_phys_alloc_freelist_pages(int flind, int pool, int order), and use
this function from both vm_page_alloc_freelist() and vm_phys_alloc_pages().
Reviewed by: alc
on-board USB controller. It is not currently enabled because there are
known problems with device communication and until those are fixed I am not
certain that it won't destabilize the system. [1]
o) Add the "cryptocteon" opencrypto device based on the OCF device written by
David McCullough. It is not currently enabled because until support for
saving/restoring coprocessor 2 state on context switch is available, it runs
with interrupts disabled, which tends to pessimize performance over using a
software crypto facility. Tests using this driver which are not negatively
affected by it running with interrupts disabled show it to be substantially
faster than software for large blocks.
Submitted by: hps [1]
