it in struct proc instead.
This fixes a boatload of compiler warning, and removes a lot of cruft
from the sources.
I have not removed the /*ARGSUSED*/, they will require some looking at.
libkvm, ps and other userland struct proc frobbing programs will need
recompiled.
2) Fix temporal decimation, disable it when
doing CAP_SINGLEs, and in dual-field capture, don't
capture fields for different frames
Submitted by: Luigi Rizzo & Randall Hopper
hope i've found out all files that actually depend on this dependancy.
IMHO, it's not very good practice to change the size of internal
structs depending on kernel options.
This corresponds to Voxware 3.5-alpha-<something> and Amancio's guspnp21.
There was a bit of a FUBAR during the commmit, so not all files are
mentioned in this commit's mail.
X-rant: I have just started to _*HATE*_ CVS...
changes:
o rip the old select from his distribution to prevent extra pollution
o the code now uses audio dma, helps reduce clicks
o improved card support, should work in full duplex on sb16 cards
o add better voxware ioctl support pointed out by Joao Carlos Mendes
Luis <jonny@coppe.ufrj.br>
o remove an unused file that I included for more complete history
o and MANY other changes
I have personally tested this code with a CS4237 based card and an AWE32
(non-PnP). Both cards worked fine in 8bit and 16bit mode.
This make the Miro PCTV work for me, including audio, and should
hopefully fix the other audio problems some people have been having.
Reviewed by: ahasty & Luigi Rizzo (freebsd-multimedia)
Very rudimentary, lots of error checks missing, but it works.
Dont do an ls on two different CD's though, it will eat your
changer mechanism for lunch :), this clearly needs some more
thought. Until then this will enable those with changers to
mount their multible CD's and doing "sensible" work....
Thanks to Andrew Gordon <arg@arg1.demon.co.uk> for donating a drive
(a NEC CDR-C251 4x4) that makes this possible to develop.
to define it by including <sys/kernel.h>. That broke PC-CARD
support for this driver, producing the dreaded "device allocation
failed" message. Surprisingly, the missing include caused only
two compiler warnings. The compilation still "succeeded" anyway.
Some of these changes are a bit rough and will become
more polished later. the changes to if_ethersubr should largely be moved
to within the appletalk code, but that will happen later.
A few of these were related to network-byteorder problems,
and more were related to loopback failures.
removed. Add a new state 'suspend' so we 'fake' insertion events at
resume time for the cards that have been suspended.
[
The code still works if you remove the card during suspend, switch the
card during suspend, or combinations of both.
]
Reviewed by: frf@xocolatl.com
in <machine/cpu.h>. Moved the declarations to <machine/cputypes.h>.
Fixed style bugs in the moved code. Fixed everything that depended on
the nested include. Don't include <machine/cpu.h> (in the changed files)
unless something in it is used directly.
and fixed everything that dependended on it being declared in the old
place. It is used in "machine-independent" code in subr_prof.c.
Moved declaration of btext from subr_prof.c to <machine/cpu.h>. It
is machine-dependent.
limit doesn't have anything to do with characters. The count mainly
needs to fit in the VOP_READ() ioflag after being left shifted by 16.
Moved vn_lock() before vn_closefile(). vn_lock() was mismerged from
Lite2.
Removed some gratuitous braces.
in a file. There was a (harmless, I think) off-by-1 error. This
was fixed in ufs long ago (rev.1.21 of ufs_readwrite.c) but not
in cd9660.
cd9660_read() has stagnated in many other ways. It is closer to
the Net/2 ufs_read() (which is was cloned from) than ufs_read()
itself is.
usage at 0x100. Quoted Justin's quotation from the manual as well, to
explain the technical background.
PR: kern/4559
Submitted by: Stephen J. Roznowski <sjr@home.net>
use a Linker Set. Note, if a driver is loaded as an LKM if will have
to use the function call, but since none of the existing drivers
are loadable, this made things cleaner and boot messages nicer.
Obtained from: PAO-970616
Rename vn_default_error to vop_defaultop all over the place.
Move vn_bwrite from vfs_bio.c to vfs_default.c and call it vop_stdbwrite.
Use vop_null instead of nullop.
Move vop_nopoll from vfs_subr.c to vfs_default.c
Move vop_sharedlock from vfs_subr.c to vfs_default.c
Move vop_nolock from vfs_subr.c to vfs_default.c
Move vop_nounlock from vfs_subr.c to vfs_default.c
Move vop_noislocked from vfs_subr.c to vfs_default.c
Use vop_ebadf instead of *_ebadf.
Add vop_defaultop for getpages on master vnode in MFS.
flicker won't occur when set_border() is called.
- Properly restore the border color when switching virtual consoles.
Pointed out by: tony@dell.com
OKed by: sos
screen size was changed while the screen saver was inactive. Adjust
the positions of the daemon and the text and clip them accordingly
each time.
- Don't call set_border() too often. Some video chip may produce
flicker.
Pointed out by tony@dell.com
- Don't fill the entire screen with blank char every time the saver is
called. Blank only the part of the screen where the daemon and the
text was previously printed.
* Kill individual drivers 'suspend' routines, since there's no simple/safe
way to suspend/resume a card w/out going through the complete probe
at initialization time.
* Default to using the apm_pccard_resume sysctl code, which basically
pretends the card was removed, and then re-inserted. Suspend/resume
is now 'emulated' with a fake insert/removal. (Hence we no longer
need the driver-specific suspend routines.)
follow.
* Rename/reorder all of the pccard structures, change many of the member
names to be descriptive, and follow more closely other 'bus' drivers
naming schemes.
* Rename a bunch of parameter and local variable names to be more
consistant in the code.
* Renamed the PCCARD 'crd' device to be the 'card' device
* KNF and make the code consistant where it was obvious.
* ifdef'd out some unused code
own definition of ISA_HOLE_START. We shouldn't need to include
bus/processor specific code in here, but it is required. At least by
doing it this way it becomes more obvious where the bogusness is.
Obtained from: email with bde
but it has too much baggage).
- create a new routine 'unregister_device_interrupt', which is now used
instead of having two routines with the same code snippet.
- Minor cleanups and commenting.
[ No functional changes, just moving things around ]
check the value and caused kernel panic when a large value was given.
- Move the configuration option SC_HISTORY_SIZE from syscons.h to
syscons.c.
- Define the maximum total number of history lines of all consoles.
It is SC_HISTORY_SIZE*MAXCONS or 1000*MAXCONS; whichever is larger.
CONS_HISTORY will allow the user to set the history size up to
SC_HISTORY_SIZE unconditionally (or the current height of the console
if it is larger than SC_HISTORY_SIZE). If the user requests a larger
buffer, it will be granted only if the total number of all allocated
history lines and the requested number of lines won't exceed the maximum.
- Don't free the previous history buffer and leave the history buffer
pointer holding a invalid pointer. Set the pointer to NULL first, then
free the buffer.
PR: bin/4592
slots. Otherwise, we try to suspend drivers who have been disabled
already.
[
The only reason the drivers are still on the list is because of race
conditions where the card is removed while the driver is in use. We
leave the drivers on the slot list (leaving all of their structures in
place in case a process is using it) but set it's state to empty so that
further uses by the pccard code know not to expect active cards.
]
from the 'lower' interrupts to the 'higher' interrupts.) We need to
find a way to set the interrupt for the controller in the config file.
Determined by: handy@sag.space.lockheed.com
for a couple of external CD's (notably the Sony PRD-650).
Note: In order to get my CD recognized, I had to configure the CD under
Win95, but it seems to work now even if I turn it off.
Submitted by: PAO [minor mods by me]
variables were lost when we removed -W, and 23 new ones including at
least one serious one have crept in for LINT.
Restored -Winline to CFLAGS. This gives only 3 old warnings and 1 new
for LINT.
floppy drive #0, regardless of what the CMOS says. This is intended
as a bandaid for those plagued with Compaq's idea to not announce the
floppy drive on their `Aero' notebook.
Using the device flags is not very nice (in particular since they
aren't per-drive but per-controller), but still looks a lot better to
me than the disgusting guesswork hack that was recently posted to
-hackers.
Doc update will follow shortly.
a change that might have an effect on the problems some have seen
with older chips, it looks like the driver may have mistakenly thought
there was an SIA when there isn't.
i was at it, do no longer insist on `PCVT_FREEBSD' being declared in
the config file, but default it to a reasonable value.
More cleanup to follow, but this part is safe for RELENG_2_2, too.
PPP_DEFLATE options... The code uses #if defined(PPP_DEFLATE) etc, so the
original method of "#define PPP_DEFLATE 0" did not actually disable
anything. It was not possible to configure out bsdcomp or zlib
compression. Also, join the settings for PPP_FILTER and NBPFILTER together
since they are related here (can't have PPP_FILTER without NBPFILTER).
1. Add defaults for more VOPs
VOP_LOCK vop_nolock
VOP_ISLOCKED vop_noislocked
VOP_UNLOCK vop_nounlock
and remove direct reference in filesystems.
2. Rename the nfsv2 vnop tables to improve sorting order.
1. Remove VOP_UPDATE, it is (also) an UFS/{FFS,LFS,EXT2FS,MFS}
intereface function, and now lives in the ufsmount structure.
2. Remove VOP_SEEK, it was unused.
3. Add mode default vops:
VOP_ADVLOCK vop_einval
VOP_CLOSE vop_null
VOP_FSYNC vop_null
VOP_IOCTL vop_enotty
VOP_MMAP vop_einval
VOP_OPEN vop_null
VOP_PATHCONF vop_einval
VOP_READLINK vop_einval
VOP_REALLOCBLKS vop_eopnotsupp
And remove identical functionality from filesystems
4. Add vop_stdpathconf, which returns the canonical stuff. Use
it in the filesystems. (XXX: It's probably wrong that specfs
and fifofs sets this vop, shouldn't it come from the "host"
filesystem, for instance ufs or cd9660 ?)
5. Try to make system wide VOP functions have vop_* names.
6. Initialize the um_* vectors in LFS.
(Recompile your LKMS!!!)
1. Add new file "sys/kern/vfs_default.c" where default actions for
VOPs go. Implement proper defaults for ABORTOP, BWRITE, LEASE,
POLL, REVOKE and STRATEGY. Various stuff spread over the entire
tree belongs here.
2. Change VOP_BLKATOFF to a normal function in cd9660.
3. Kill VOP_BLKATOFF, VOP_TRUNCATE, VOP_VFREE, VOP_VALLOC. These
are private interface functions between UFS and the underlying
storage manager layer (FFS/LFS/MFS/EXT2FS). The functions now
live in struct ufsmount instead.
4. Remove a kludge of VOP_ functions in all filesystems, that did
nothing but obscure the simplicity and break the expandability.
If a filesystem doesn't implement VOP_FOO, it shouldn't have an
entry for it in its vnops table. The system will try to DTRT
if it is not implemented. There are still some cruft left, but
the bulk of it is done.
5. Fix another VCALL in vfs_cache.c (thanks Bruce!)
2/ Show the dummy mount in the mount list. it cannot be reached (that I know of)
but puting it there, means that disks mounted from devfs will have their things such as the superblock and the bitmaps, synced to disk :)
at moment of delivery. Restoring the signal mask after the tsleep()
is next to useless since the signal is still queued.. This was interacting
with usleep(3) on receipt of a SIGALRM causing it to near busy loop.
Now, we set the new signal mask "permanently" for signanosleep().
Problem noted by: bde
1. Use the default function to access all the specfs operations.
2. Use the default function to access all the fifofs operations.
3. Use the default function to access all the ufs operations.
4. Fix VCALL usage in vfs_cache.c
5. Use VOCALL to access specfs functions in devfs_vnops.c
6. Staticize most of the spec and fifofs vnops functions.
7. Make UFS panic if it lacks bits of the underlying storage handling.
1. Remove comment stating the blatantly obvious.
2. Align in two columns.
3. Sort all but the default element alphabetically.
4. Remove XXX comments pointing out entries not needed.
ip->i_flags.
Rev.1.18 completely broke ufs. My root directory went away about 10
seconds after booting. I think file system damage was null, since
IN_HASHED = 0x80 is not used in the disk flags (it would probably
be UF_SOMETHING if it were used).
Distribute all but the most fundamental malloc types. This time I also
remembered the trick to making things static: Put "static" in front of
them.
A couple of finer points by: bde
much grieve to owners of IBM drives when used in conjunction with
tagged command queuing, and didn't serve any purpose at all (since
experiments have proven that it simply didn't work).
Instead, call scsi_start_unit() once in sd_attach(), so in case the
drive has been configured to `remote start', it will spin up there.
(If it has spun down later, it must have been because of administrator
action (scsi(8)) anyway.)
While i was at it, bump the timeout for scsi_start_unit() to 30
seconds. 10 seconds were way too few for most drives.
the struct kmemstats that describes the type.
This allows subsystems to declare their malloc types locally
and <sys/malloc.h> doesn't need tweaked everytime somebody
gets an idea. You can even have a type local to a lkm...
I don't know if we really need the longdesc, comments welcome.
TODO: There is a single nit in ext2fs, that will be fixed later,
and I intend to remove all unused malloc types and distribute
the rest closer to their use.
now corrected. New tunables/instrumentation added. The code is now
likely "good enough to use." I will add the userland support soon.
The "high performance" mode for raw devices is still missing, and will
be added next. POSIX system calls that now appear to work:
aio_cancel, aio_error, aio_read, aio_return, aio_suspend, aio_write,
lio_listio. Missing, but to be added soon: aio_fsync.
has a PS/2 port, this is a good thing. Note, older 386/486 boxes may
lockup the keyboard controller with this enabled, but most of these kinds
of machines don't run -current, so the benefits outweigh the downsides.
Discussed with: Kazutaka YOKOTA <yokota@zodiac.mech.utsunomiya-u.ac.jp>
represent in the TCP header. The old code did effectively:
win = min(win, MAX_ALLOWED);
win = max(win, what_i_think_i_advertised_last_time);
so if what_i_think_i_advertised_last_time is bigger than can be
represented in the header (e.g. large buffers and no window scaling)
then we stuff a too-big number into a short. This fix reverses the
order of the comparisons.
PR: kern/4712
Introduce the SIOC[SG]IFGENERIC hooks that can be used to pass an
arbritrary ioctl subcommand into an interface driver. Surprisingly
enough, there was no provision for this already present (except of the
option of abusing SIOC[SG]IFMEDIA for this).
The idea is that an interface driver can establish ioctl subcommands
of its own that can't be meaningfully interpreted by the upper layer
interface ioctl function. Something like this is required to
implement a clean solution of passing down things like CHAP secrets or
PPP options to the /sys/net/if_sppp* files. (Yes, my CHAP is now
finally working with it, but i gotta update my kernel to the new
callout interface before being able to commit _that_.)
Reviewed by: peter [long ago, actually]
arbritrary ioctl subcommand into an interface driver. Surprisingly
enough, there was no provision for this already present (except of the
option of abusing SIOC[SG]IFMEDIA for this).
The idea is that an interface driver can establish ioctl subcommands
of its own that can't be meaningfully interpreted by the upper layer
interface ioctl function. Something like this is required to
implement a clean solution of passing down things like CHAP secrets or
PPP options to the /sys/net/if_sppp* files. (Yes, my CHAP is now
finally working with it, but i gotta update my kernel to the new
callout interface before being able to commit _that_.)
Reviewed by: peter [long ago, actually]
