The code in this file runs before the sanitizer can initialize its
shadow map.
Fixes: ad2fac552c ("lib/libc/amd64: add archlevel-based simd dispatch framework")
The section INTERNET ADDRESSES describes the acceptance of dotted
values with varying number of parts in multiple bases. This applies
to inet_aton and inet_addr, but not to inet_pton. Clarify this
section by listing the functions to which this applies. Move the
description of what inet_pton accepts into this section from STANDARDS,
where it is easily missed. Rename the section to clarify that it
applies only to IPv4. (inet_pton also works with IPv6.)
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D43537
In the errno list, add an explicit note and reference to the note in the
STANDARDS section.
When O_NOFOLLOW is specified and the target is a symbolic link FreeBSD
sets errno to a value different than that specified by POSIX. Commit
295159dfa3 added a note to this effect, but I missed it when reading
through the list of errno values.
PR: 214633
Reviewed by: markj
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D43618
Unlike Linux, we do provide libc wrapper. All definitions and
prototypes are available from <unistd.h>
Tested by: manu
Reviewed by: brooks, markj
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D43518
It was exposed (under FBSDprivate_1.0) for forward compatability in
threading libraries in 2008 by commit cd7d66a21f. The last consumer
was removed in 2015 by commit 8495e8b1e9. I missed this among the _
and __sys_ symbols in commit e2417a21a0.
Reviewed by: imp, kib
Differential Revision: https://reviews.freebsd.org/D43408
Put declerations of _ and __sys_ prefixed stubs at the top and
everything else at the bottom. Sort the bottom list with sort(1).
This paves the way to generate the syscall symbol list.
Reviewed by: kib
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D43386
Add _SYSCALL_BODY() macro which invokes the syscall via _SYCALL() and
calls cerror as required. Use to implement PSEUDO() and RSYSCALL().
Reviewed by: jhibbits
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D43323
Add _SYSCALL_BODY() macro which invokes the syscall via _SYCALL() and
calls cerror as required. Use to implement PSEUDO() and RSYSCALL().
Reviewed by: jhibbits
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D43322
Add a required include to resolv.h for sockaddr_in. This should reduce
patching required when porting code written with Linux or NetBSD in mind.
PR: 182466
MFC after: 1 week
You can't return 0 and not write the mode if mode_p is non-NULL. That
violates the API contract and in common usage leaves stack trash in
*mode_p.
The acl_equiv_mode_test test passed by accident.
Reviewed by: kevans, markj
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D43278
PR#273962 reported that copy_file_range(2) did not work
on shared memory objects and returned EINVAL.
Although the reporter felt this was incorrect, it is what
the Linux copy_file_range(2) syscall does.
Since there was no collective agreement that the FreeBSD
semantics should be changed to no longer be Linux compatible,
copy_file_range(2) still works on regular files only.
This man page update clarifies that. If, someday, copy_file_range(2)
is changed to support non-regular files, then the man page will
need to be updated to reflect that.
PR: 273962
Reviewed by: karels, pauamma_gundo.com (manpages)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D43227
The scalar implementation is fairly simplistic and only performs
slightly better than the generic C implementation. It could be
improved by using the same algorithm as for memchr, but it would
have been a lot more complicated.
The baseline implementation is similar to timingsafe_memcmp. It's
slightly slower than memchr() due to the more complicated main
loop, but I don't think that can be significantly improved.
Tested by: developers@, exp-run
Approved by: mjg
MFC after: 1 month
MFC to: stable/14
PR: 275785
Differential Revision: https://reviews.freebsd.org/D42925
The "values" test case is specifically crafted to detect the off-by-one
error previous discovered in the scalar strchrnul implementation.
Tested by: developers@, exp-run
Approved by: mjg
MFC after: 1 month
MFC to: stable/14
PR: 275785
Differential Revision: https://reviews.freebsd.org/D42925
POSIX.1-2004 and the upcoming C23 agree that memccpy()'s arguments
are restrict qualified and must not overlap. In 2002, restrict
qualifiers were added to <string.h>'s declaration of the function.
Make things official and document that the arguments must not
overlap.
See also: 61b60edfd3
Approved by: kib
MFC after: 1 month
MFC to: stable/14
Based on the strlcpy code from D42863, this patch adds a SIMD-enhanced
implementation of memccpy for amd64. A scalar implementation calling
into memchr and memcpy to do the job is provided, too.
Please note that this code does not behave exactly the same as the C
implementation of memccpy for overlapping inputs. However, overlapping
inputs are not allowed for this function by ISO/IEC 9899:1999 and neither
has the C implementation any code to deal with the possibility. It just
proceeds byte-by-byte, which may or may not do the expected thing for
some overlaps. We do not document whether overlapping inputs are
supported in memccpy(3).
Tested by: developers@, exp-run
Approved by: mjg
MFC after: 1 month
MFC to: stable/14
PR: 275785
Differential Revision: https://reviews.freebsd.org/D42902
This should pick up our optimised memchr(), strlen(), and strlcpy()
when strlcat() is called.
Tested by: developers@, exp-run
Approved by: mjg
MFC after: 1 month
MFC to: stable/14
PR: 275785
Differential Revision: https://reviews.freebsd.org/D42863
Somewhat similar to stpncpy, but different in that we need to compute
the full source length even if the buffer is shorter than the source.
strlcat is implemented as a simple wrapper around strlcpy. The scalar
implementation of strlcpy just calls into strlen() and memcpy() to do
the job.
Perf-wise we're very close to stpncpy. The code is slightly slower as
it needs to carry on with finding the source string length even if the
buffer ends before the string.
Sponsored by: The FreeBSD Foundation
Tested by: developers@, exp-run
Approved by: mjg
MFC after: 1 month
MFC to: stable/14
PR: 275785
Differential Revision: https://reviews.freebsd.org/D42863
A straightforward derivation from the stpncpy unit test.
Sponsored by: The FreeBSD Foundation
Tested by: developers@, exp-run
Approved by: mjg
MFC after: 1 month
MFC to: stable/14
PR: 275785
Differential Revision: https://reviews.freebsd.org/D42863
strcat has a bespoke scalar assembly implementation we
inherited from NetBSD. While it performs well, it is
better to call into our SIMD implementations if any SIMD
features are available at all. So do that and implement
strcat() by calling into strlen() and strcpy() if these
are available.
Sponsored by: The FreeBSD Foundation
Tested by: developers@, exp-run
Approved by: mjg
MFC after: 1 month
MFC to: stable/14
PR: 275785
Differential Reviison: https://reviews.freebsd.org/D42600
This was surprisingly annoying to get right, despite being such a simple
function. A scalar implementation is also provided, it just calls into
our optimised memchr(), memcpy(), and memset() routines to carry out its
job.
I'm quite happy with the performance. glibc only beats us for very long
strings, likely due to the use of AVX-512. The scalar implementation
just calls into our optimised memchr(), memcpy(), and memset() routines,
so it has a high overhead to begin with but then performs ok for the
amount of effort that went into it. Still beats the old C code, except
for very short strings.
Sponsored by: The FreeBSD Foundation
Tested by: developers@, exp-run
Approved by: mjg
MFC after: 1 month
MFC to: stable/14
PR: 275785
Differential Revision: https://reviews.freebsd.org/D42519
This adds additional unit tests validating the function for
All possible alignment offsets of source and destination.
Also extend the test to allow testing of an external stpncpy
implementation, which greatly simplifies the development of
custom implementations.
Sponsored by: The FreeBSD Foundation
Tested by: developers@, exp-run
Approved by: mjg
MFC after: 1 month
MFC to: stable/14
PR: 275785
Differential Revision: https://reviews.freebsd.org/D42519
The strsep() function is basically strcspn() with extra steps.
On amd64, we now have an optimised implementation of strcspn(),
so instead of implementing the inner loop manually, just call
into the optimised routine.
Sponsored by: The FreeBSD Foundation
Tested by: developers@, exp-run
Approved by: mjg
MFC after: 1 month
MFC to: stable/14
PR: 275785
Differential Revision: https://reviews.freebsd.org/D42346
The baseline implementation is very straightforward, while the scalar
implementation suffers from register pressure and the need to use SWAR
techniques similar to those used for strchr().
Sponsored by: The FreeBSD Foundation
Tested by: developers@, exp-run
Approved by: mjg
MFC after: 1 month
MFC to: stable/14
PR: 275785
Differential Revision: https://reviews.freebsd.org/D42217
The scalar implementation is fairly straightforward and merely unrolled
four times. The baseline implementation closely follows D41971 with
appropriate extensions and extra code paths to pay attention to string
length.
Performance is quite good. We beat both glibc (except for very long
strings, but they likely use AVX which we don't) and Bionic (except for
medium-sized aligned strings, where we are still in the same ballpark).
Sponsored by: The FreeBSD Foundation
Tested by: developers@, exp-run
Approved by: mjg
MFC after: 1 month
MFC to: stable/14
PR: 275785
Differential Revision: https://reviews.freebsd.org/D42122
These are patterned after the previously added (D41970)
strcmp tests, but are extended to check for various length
conditions.
Sponsored by: The FreeBSD Foundation
Tested by: developers@, exp-run
Approved by: mjg
MFC after: 1 month
MFC to: stable/14
PR: 275785
Differential Revision: https://reviews.freebsd.org/D42122
This lets us use our optimised strcspn() routine for strpbrk() calls.
Sponsored by: The FreeBSD Foundation
Tested by: developers@, exp-run
Approved by: mjg
MFC after: 1 month
MFC to: stable/14
PR: 275785
Differential Revision: https://reviews.freebsd.org/D41980
This is the most complicated one so far. The basic idea is to process
the bulk of the string in aligned blocks of 16 bytes such that one
string runs ahead and the other runs behind. The string that runs ahead
is checked for NUL bytes, the one that runs behind is compared with the
corresponding chunk of the string that runs ahead. This trades an extra
load per iteration for the very complicated block-reassembly needed in
the other implementations (bionic, glibc). On the flip side, we need
two code paths depending on the relative alignment of the two buffers.
The initial part of the string is compared directly if it is known not
to cross a page boundary. Otherwise, a complex slow path to avoid
crossing into unmapped memory commences.
Performance-wise we beat bionic for misaligned strings (i.e. the strings
do not share an alignment offset) and reach comparable performance for
aligned strings. glibc is a bit better as it has a special kernel for
AVX-512, where this stuff is a bit easier to do.
Sponsored by: The FreeBSD Foundation
Tested by: developers@, exp-run
Approved by: mjg
MFC after: 1 month
MFC to: stable/14
PR: 275785
Differential Revision: https://reviews.freebsd.org/D41971
Fix "singleton" function used by regcomp() to turn character set matches
into exact character matches if a character set has exactly one
element.
The underlying cset representation is complex; most critically it
records"small" characters (codepoint less than either 128
or 256 depending on locale) in a bit vector, and "wide" characters in
a secondary array.
Unfortunately the "singleton" function uses to identify singleton sets
treated a cset as a singleton if either the "small" or the "wide" sets
had exactly one element (it would then ignore the other set).
The easiest way to demonstrate this bug:
$ export LANG=C.UTF-8
$ echo 'a' | grep '[abà]'
It should match (and print "a") but instead it doesn't match because the
single accented character in the set is misinterpreted as a singleton.
Reviewed by: kevans, yuripv
Obtained from: illumos
Differential Revision: https://reviews.freebsd.org/D43149
Add _SYSCALL_BODY() macro which invokes the syscall via _SYCALL() and
calls cerror as required. Use to implement PSEUDO() and RSYSCALL().
Reviewed by: jhibbits
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D43056
When matching against a set of 17--32 characters, strcspn() uses two
invocations of PCMPISTRI to match against the first 16 characters
of the set and then the remaining characters. If a match was found in
the first half of the set, the code originally immediately returned
that match. However, it is possible for a match in the second half of
the set to occur earlier in the vector, leading to that match being
overlooked.
Fix the code by checking if there is a match in the second half of the
set and taking the earlier of the two matches.
The correctness of the function has been verified with extended unit
tests and test runs against the glibc test suite.
Approved by: mjg (implicit, via IRC)
MFC after: 1 week
MFC to: stable/14
This new unit test verifies that if there are multiple
matches, the first match is returned, ignoring later
matches.
Approved by: mjg (blanket, via IRC)
MFC after: 1 week
MFC to: stable/14
Rename SYSTRAP() macro to _SYSCALL() and add _SYSCALL_BODY() which invokes
the syscall via _SYCALL() and then calls cerror as required. Use to
implement PSEUDO() and RSYSCALL() removing _SYSCALL_NOERROR().
Reviewed by: imp
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D43061
The last use was removed in 2018 as part of a reimplementation of brk()
and sbrk() in commit 9d9fd255d6.
Reviewed by: imp
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D43060
Add a _SYSCALL(name) which calls the SYS_name syscall. Use it to add a
_SYSCALL_BODY() macro which invokes the syscall and calls cerror as
required. Use the latter to implement PSEUDO() and RSYSCALL().
Reviewed by: imp, markj
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D43059
Add _SYSCALL_BODY() macro which invokes the syscall via _SYCALL() and
calls cerror as required. Use to implement PSEUDO() and RSYSCALL().
Reviewed by: imp, markj
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D43057
We don't support it, so there's no need to tell readers what would
happen if we did. Also, don't remind the user that a certain field is
ignored by aio_read. Mentioning every ignored field would make the man
pages too verbose.
MFC after: 1 week
Sponsored by: Axcient
Reviewed by: Pau Amma <pauamma@gundo.com>
Differential Revision: https://reviews.freebsd.org/D42622
