The header exports the following:
- Definition of struct tcb.
- Helpers to get/set the tcb for the current thread.
- TLS_TCB_SIZE (size of TCB)
- TLS_TCB_ALIGN (alignment of TCB)
- TLS_VARIANT_I or TLS_VARIANT_II
- TLS_DTV_OFFSET (bias of pointers in dtv[])
- TLS_TP_OFFSET (bias of "thread pointer" relative to TCB)
Note that TLS_TP_OFFSET does not account for if the unbiased thread
pointer points to the start of the TCB (arm and x86) or the end of the
TCB (MIPS, PowerPC, and RISC-V).
Note also that for amd64, the struct tcb does not include the unused
tcb_spare field included in the current structure in libthr. libthr
does not use this field, and the existing calls in libc and rtld that
allocate a TCB for amd64 assume it is the size of 3 Elf_Addr's (and
thus do not allocate room for tcb_spare).
A <sys/_tls_variant_i.h> header is used by architectures using
Variant I TLS which uses a common struct tcb.
Reviewed by: kib (older version of x86/tls.h), jrtc27
Sponsored by: The University of Cambridge, Google Inc.
Differential Revision: https://reviews.freebsd.org/D33351
This is the more standard name for the bias of dtv pointers used on
other platforms. This also fixes a few other places that were using
the wrong bias previously on MIPS such as dlpi_tls_data in struct
dl_phdr_info and the recently added __libc_tls_get_addr().
Reviewed by: kib, jrtc27
Sponsored by: The University of Cambridge, Google Inc.
Differential Revision: https://reviews.freebsd.org/D33346
After a round of cleanups in late 2020, all definitions are
functionally identical.
This removes a rotted __aligned(8) on arm. It was added in
b7112ead32 and was intended to align the
args member so that 64-bit types (off_t, etc) could be safely read on
armeb compiled with clang. With the removal of armev, this is no
longer needed (armv7 requires that 32-bit aligned reads of 64-bit
values be supported and we enable such support on armv6). As further
evidence this is unnecessary, cleanups to struct syscall_args have
resulted in args being 32-bit aligned on 32-bit systems. The sole
effect is to bloat the struct by 4 bytes.
Reviewed by: kib, jhb, imp
Differential Revision: https://reviews.freebsd.org/D33308
This definition enables callers to estimate remaining space on the
kstack, and take action on it. Notably, it enables optimizations in the
GEOM and netgraph subsystems to directly dispatch work items when there
is sufficient stack space, rather than queuing them for a worker thread.
Implement it for riscv, arm, and mips. Remove the #ifdefs, so it will
not go unimplemented elsewhere.
PR: 259157
Reviewed by: mav, kib, markj (previous version)
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D32580
in_cksum() and related routines are implemented separately for each
platform, but only i386 and arm have optimized versions. Other
platforms' copies of in_cksum.c are identical except for style
differences and support for big-endian CPUs.
Deduplicate the implementations for the rest of the platforms. This
will make it easier to implement in_cksum() for unmapped mbufs. On arm
and i386, define HAVE_MD_IN_CKSUM to mean that the MI implementation is
not to be compiled.
No functional change intended.
Reviewed by: kp, glebius
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D33095
It was never implemented on powerpc or riscv and appears to have been
unused since it was added in 1998. No functional change intended.
Reviewed by: kp, glebius, cy
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D33093
Add a boolean parameter to minidumpsys(), to indicate a live dump. When
requested, take a snapshot of important global state, and pass this to
the machine-dependent minidump function. For now this includes the
kernel message buffer, and the bitset of pages to be dumped. Beyond
this, we don't take much action to protect the integrity of the dump
from changes in the running system.
A new function msgbuf_duplicate() is added for snapshotting the message
buffer. msgbuf_copy() is insufficient for this purpose since it marks
any new characters it finds as read.
For now, nothing can actually trigger a live minidump. A future patch
will add the mechanism for this. For simplicity and safety, live dumps
are disallowed for mips.
Reviewed by: markj, jhb
MFC after: 2 weeks
Sponsored by: Juniper Networks, Inc.
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D31993
When constructing the set of dumpable pages, use the bitset provided by
the state argument, rather than assuming vm_page_dump invariably. For
normal kernel minidumps this will be a pointer to vm_page_dump, but when
dumping the live system it will not.
To do this, the functions in vm_dumpset.h are extended to accept the
desired bitset as an argument. Note that this provided bitset is assumed
to be derived from vm_page_dump, and therefore has the same size.
Reviewed by: kib, markj, jhb
MFC after: 2 weeks
Sponsored by: Juniper Networks, Inc.
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D31992
Don't assume we are dumping the global message buffer, but use the one
provided by the state argument. While here, drop superfluous
cast to char *.
Reviewed by: markj, jhb
MFC after: 2 weeks
Sponsored by: Juniper Networks, Inc.
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D31991
The minidump code is written assuming that certain global state will not
change, and rightly so, since it executes from a kernel debugger
context. In order to support taking minidumps of a live system, we
should allow copies of relevant global state that is likely to change to
be passed as parameters to the minidumpsys() function.
This patch does the work of parameterizing this function, by adding a
struct minidumpstate argument. For now, this struct allows for copies of
the kernel message buffer, and the bitset that tracks which pages should
be dumped (vm_page_dump). Follow-up changes will actually make use of
these arguments.
Notably, dump_avail[] does not need a snapshot, since it is not expected
to change after system initialization.
The existing minidumpsys() definitions are renamed, and a thin MI
wrapper is added to kern_dump.c, which handles the construction of
the state struct. Thus, calling minidumpsys() remains as simple as
before.
Reviewed by: kib, markj, jhb
Sponsored by: Juniper Networks, Inc.
Sponsored by: Klara, Inc.
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D31989
Define CC_NEWRENO in all the appropriate DEFAULTS and std.* config
files. It's the default congestion control algorithm. Add code to cc.c
so that CC_DEFAULT is "newreno" if it's not overriden in the config
file.
Sponsored by: Netflix
Fixes: b8d60729de ("tcp: Congestion control cleanup.")
Revired by: manu, hselasky, jhb, glebius, tuexen
Differential Revision: https://reviews.freebsd.org/D32964
sched_throw() can no longer take a NULL thread, APs enter through
sched_ap_entry() instead. This completely removes branching in the
common case and cleans up both paths. No functional change intended.
Reviewed by: kib, markj
Differential Revision: https://reviews.freebsd.org/D32829
schedinit_ap() sets up an AP for a later call to sched_throw(NULL).
Currently, ULE sets up some pcpu bits and fixes the idlethread lock with
a call to sched_throw(NULL); this results in a window where curthread is
setup in platforms' init_secondary(), but it has the wrong td_lock.
Typical platform AP startup procedure looks something like:
- Setup curthread
- ... other stuff, including cpu_initclocks_ap()
- Signal smp_started
- sched_throw(NULL) to enter the scheduler
cpu_initclocks_ap() may have callouts to process (e.g., nvme) and
attempt to sched_add() for this AP, but this attempt fails because
of the noted violated assumption leading to locking heartburn in
sched_setpreempt().
Interrupts are still disabled until cpu_throw() so we're not really at
risk of being preempted -- just let the scheduler in on it a little
earlier as part of setting up curthread.
Reviewed by: alfredo, kib, markj
Triage help from: andrew, markj
Smoke-tested by: alfredo (ppc), kevans (arm64, x86), mhorne (arm)
Differential Revision: https://reviews.freebsd.org/D32797
Remove page zeroing code from consumers and stop specifying
VM_ALLOC_NOOBJ. In a few places, also convert an allocation loop to
simply use VM_ALLOC_WAITOK.
Similarly, convert vm_page_alloc_domain() callers.
Note that callers are now responsible for assigning the pindex.
Reviewed by: alc, hselasky, kib
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D31986
The implementation of the progress bar is simple, but duplicated for
most minidump implementations. Extract the common bits to kern_dump.c.
Ensure that the bar is reset with each subsequent dump; this was only
done on some platforms previously.
Reviewed by: markj
MFC after: 2 weeks
Sponsored by: Juniper Networks, Inc.
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D31885
The function is identical in each minidump implementation, so move it to
vm_phys.c. The only slight exception is powerpc where the function was
public, for use in moea64_scan_pmap().
Reviewed by: kib, markj, imp (earlier version)
MFC after: 2 weeks
Sponsored by: Juniper Networks, Inc.
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D31884
Move the common kernel function signatures from machine/reg.h to a new
sys/reg.h. This is in preperation for adding PT_GETREGSET to ptrace(2).
Reviewed by: imp, markj
Sponsored by: DARPA, AFRL (original work)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D19830
ovbcopy is unused since 9f45b2da8f ("Define ovbcopy() as a macro
which expands to the equivalent bcopy() call")
bcopy is left in place because it is used by assembly primitives
Sponsored by: Rubicon Communications, LLC ("Netgate")
These ones were unambiguous cases where the Foundation was the only
listed copyright holder (in the associated license block).
Sponsored by: The FreeBSD Foundation
which is the place to put MD asserts about allocated pages.
On amd64, verify that allocated page does not belong to the kernel
(text, data) or early allocated pages.
Reviewed by: markj
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D31121
The syscall number is stored in the same register as the syscall return
on amd64 (and possibly other architectures) and so it is impossible to
recover in the signal handler after the call has returned. This small
tweak delivers it in the `si_value` field of the signal, which is
sufficient to catch capability violations and emulate them with a call
to a more-privileged process in the signal handler.
This reapplies 3a522ba1bc with a fix for
the static assertion failure on i386.
Approved by: markj (mentor)
Reviewed by: kib, bcr (manpages)
Differential Revision: https://reviews.freebsd.org/D29185
amd64 and 32-bit ARM already had assertions to this effect. Add them to
other pmaps.
Reviewed by: alc, kib
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D31171
The syscall number is stored in the same register as the syscall return
on amd64 (and possibly other architectures) and so it is impossible to
recover in the signal handler after the call has returned. This small
tweak delivers it in the `si_value` field of the signal, which is
sufficient to catch capability violations and emulate them with a call
to a more-privileged process in the signal handler.
Approved by: markj (mentor)
Reviewed by: kib, bcr (manpages)
Differential Revision: https://reviews.freebsd.org/D29185
Use sysentvec hooks to only call umtx_thread_exit/umtx_exec, which handle
robust mutexes, for native FreeBSD ABI. Similarly, there is no sense
in calling sigfastblock_clear() for non-native ABIs.
Requested by: dchagin
Reviewed by: dchagin, markj (previous version)
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D30987
This adds `sv_elf_core_osabi`, `sv_elf_core_abi_vendor`,
and `sv_elf_core_prepare_notes` fields to `struct sysentvec`,
and modifies imgact_elf.c to make use of them instead
of hardcoding FreeBSD-specific values. It also updates all
of the ABI definitions to preserve current behaviour.
This makes it possible to implement non-native ELF coredump
support without unnecessary code duplication. It will be used
for Linux coredumps.
Reviewed By: kib
Sponsored By: EPSRC
Differential Revision: https://reviews.freebsd.org/D30921
armv6 and armv7 systems already were 1000Hz. The other armv5 were a
mix of 100 and 1000. This changes them to 1000. Should there be
issues, we can add options HZ=100 to the systems that have bad
performance at the drop of a hat.
mips is a lot more complicated. But most of the systems are already
1000HZ. The hardware exceptions are all fast enough to run at
1000Hz. MALTA is our primary emulator, and history has shown emulators
tend to like 100Hz better, so run those systems at 100Hz. As with arm,
any system that shows a huge performance regression can reverted to
100Hz easily.
This was going to be committed well in advance of the 13 branch, but
it was delayed and forgotten til now.
Discussed on: #bsdmips ages ago
Sponsored by: Netflix
Many of these typedefs are the same across all architectures or can
be set based on an architecture-independent compiler-provided macro
(e.g. __SIZEOF_SIZE_T__). These macros have been available since GCC 4.6
and Clang sometime before 3.0 (godbolt.org does not have any older clang
versions installed).
I originally considered using the compiler-provided `__FOO_TYPE__` directly.
However, in order to do so we have to check that those match the previous
typedef exactly (not just that they have the same size) since any change
would be an ABI break. For example, changing `long` to `long long` results
in different C++ name mangling. Additionally, Clang and GCC disagree on
the underlying type for some of (u)int*_fast_t types, so this change
only moves the definitions that are identical across all architectures
and does not touch those types.
This de-deduplication will allow us to have a smaller diff downstream in
CheriBSD: we only have to only change the (u)intptr_t definition in
sys/_types.h in CheriBSD instead of having to change machine/_types.h for
all CHERI-enabled architectures (currently RISC-V, AArch64 and MIPS).
Reviewed By: imp, kib
Differential Revision: https://reviews.freebsd.org/D29895
Add the line that's in other foo_machdep.c file where the CPU model is
reported.
This was part of github pull request 459, but in a different way. The
rest of that pull request was either committed or not relevant. I did it
in a more correct way.
Submitted by: Priit Trees
Sponsored by: Netflix
Small patch to set "hw.model" by SoC ChipCommon ID. On BCM4718 it will be BCM4716, because 4716 is core for 4716,4717 & 4718.
Tested on Netgear WNR3500L (BCM4718) and Asus RT-N53 (BCM5357).
Reviewed by: landonf, yamori813@yahoo.co.jp
Sponsored by: Postgres Professional
Differential revision: https://reviews.freebsd.org/D12737
This is intended for use in KTLS transmit where each TLS record is
described by a single mbuf that is itself queued in the socket buffer.
Using the existing CRYPTO_BUF_MBUF would result in
bus_dmamap_load_crp() walking additional mbufs in the socket buffer
that are not relevant, but generating a S/G list that potentially
exceeds the limit of the tag (while also wasting CPU cycles).
Reviewed by: markj
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D30136
I've seen this fail from time to time and just hang during reset.
Instead of it just hanging, just poke it again. I've not seen it
fail in hundreds of test resets now.
Tested:
* AR9344 AP/STA configuration
While here, fix all links to older en_US.ISO8859-1 documentation
in the src/ tree.
PR: 255026
Reported by: Michael Büker <freebsd@michael-bueker.de>
Reviewed by: dbaio
Approved by: blackend (mentor), re (gjb)
MFC after: 10 days
Differential Revision: https://reviews.freebsd.org/D30265
There haven't been any non-obscure drivers that supported this
functionality and it has been impossible to test to ensure that it
still works. The only known consumer of this interface was the engine
in OpenSSL < 1.1. Modern OpenSSL versions do not include support for
this interface as it was not well-documented.
Reviewed by: cem
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D29736
This is intended to be used with memory mapped IO, e.g. from
bus_space_map with no flags, or pmap_mapdev.
Use this new memory type in the map request configured by
resource_init_map_request, and in pciconf.
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D29692
--Eliminate a big ifdef that encompassed all currently-supported
architectures except mips and powerpc32. This applied to the case
in which we've allocated a superpage but the pager-populated range
is insufficient for a superpage mapping. For platforms that don't
support superpages the check should be inexpensive as we shouldn't
get a superpage in the first place. Make the normal-page fallback
logic identical for all platforms and provide a simple implementation
of pmap_ps_enabled() for MIPS and Book-E/AIM32 powerpc.
--Apply the logic for handling pmap_enter() failure if a superpage
mapping can't be supported due to additional protection policy.
Use KERN_PROTECTION_FAILURE instead of KERN_FAILURE for this case,
and note Intel PKU on amd64 as the first example of such protection
policy.
Reviewed by: kib, markj, bdragon
Differential Revision: https://reviews.freebsd.org/D29439
The remote protocol allows for implementations to report more specific
reasons for the break in execution back to the client [1]. This is
entirely optional, so it is only implemented for amd64, arm64, and i386
at the moment.
[1] https://sourceware.org/gdb/current/onlinedocs/gdb/Stop-Reply-Packets.html
Reviewed by: jhb
MFC after: 3 weeks
Sponsored by: NetApp, Inc.
Sponsored by: Klara, Inc.
NetApp PR: 51
Differential Revision: https://reviews.freebsd.org/D29174
Use the new kdb variants. Print more specific error messages.
Reviewed by: jhb, markj
MFC after: 3 weeks
Sponsored by: NetApp, Inc.
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D29156
This basically mirrors what already exists in ddb, but provides a
slightly improved interface. It allows the caller to specify the
watchpoint access type, and returns more specific error codes to
differentiate failure cases.
This will be used to support hardware watchpoints in gdb(4).
Stubs are provided for architectures lacking hardware watchpoint logic
(mips, powerpc, riscv), while other architectures are added individually
in follow-up commits.
Reviewed by: jhb, kib, markj
MFC after: 3 weeks
Sponsored by: NetApp, Inc.
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D29155
This change serves two purposes.
First, we take advantage of the compiler provided endian definitions to
eliminate some long-standing duplication between the different versions
of this header. __BYTE_ORDER__ has been defined since GCC 4.6, so there
is no need to rely on platform defaults or e.g. __MIPSEB__ to determine
endianness. A new common sub-header is added, but there should be no
changes to the visibility of these definitions.
Second, this eliminates the hand-rolled __bswapNN() routines, again in
favor of the compiler builtins. This was done already for x86 in
e6ff6154d2. The benefit here is that we no longer have to maintain our
own implementations on each arch, and can instead rely on the compiler
to emit appropriate instructions or libcalls, as available. This should
result in equivalent or better code generation. Notably 32-bit arm will
start using the `rev` instruction for these routines, which is available
on armv6+.
PR: 236920
Reviewed by: arichardson, imp
Tested by: bdragon (BE powerpc)
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D29012
