rather than in ifindex_table[]; all (except one) accesses are
through ifp anyway. IF_LLADDR() works faster, and all (except
one) ifaddr_byindex() users were converted to use ifp->if_addr.
- Stop storing a (pointer to) Ethernet address in "struct arpcom",
and drop the IFP2ENADDR() macro; all users have been converted
to use IF_LLADDR() instead.
a synchronous reprogramming of hardware MAC filters if the physical
interface are up and running. Previously, MAC filters would be
reconfigured only when the fec interface was brought up.
- Disallow bundle reconfiguration when virtual
interface is running; otherwise, removing a
port from a running configuration will cause
a panic in the start() method on the next packet
on an assumption that a bundle has an even
number of ports (2 or 4).
- Disallow bringing of virtual interface to a
running state when a bundle size is 0; otherwise,
adding and then removing the port will similarly
cause a panic.
- Add missing initialization of fec_ifstat when
adding a new port and fix media status reporting
when virtual interface isn't yet up (check for
fec_status of 1 rather than != 0).
previously, ifp->if_type was set to IFT_ETHER by
ether_ifattach(), now it's done by if_alloc() so
an assignment of if_type to IFT_PROPVIRTUAL after
if_alloc() but before ether_ifattach() broke it.
This makes arp(8) and friends happy about the fec
interfaces, and will allow us to use if_setlladdr()
on the fec interface.
- Set/reset IFF_DRV_RUNNING/IFF_DRV_OACTIVE in init()
and stop() methods rather than in ioctl(), like the
rest of the drivers do. This fixes a bug when an
"ifconfig fec0 ipv4_address" would not have made
the interface running, didn't launch the ticker
function to track media status of bundled ports,
etc.
destruction:
- Backout 1.62, since it doesn't fix all possible
problems.
- Upon node creation, put an additional reference on node.
- Add a mutex and refcounter to struct ngsock. Netgraph node,
control socket and data socket all count as references.
- Introduce ng_socket_free_priv() which removes one reference
from ngsock, and frees it when all references has gone.
- No direct pointers between pcbs and node, all pointing
is done via struct ngsock and protected with mutex.
- Introduce ng_topo_mtx, a mutex to protect topology changes.
- In ng_destroy_node() protect with ng_topo_mtx the process
of checking and pointing at ng_deadnode. [1]
- In ng_con_part2() check that our peer is not a ng_deadnode,
and protect the check with ng_topo_mtx.
- Add KASSERTs to ng_acquire_read/write, to make more
understandible synopsis in case if called on ng_deadnode.
Reported by: Roselyn Lee [1]
- Introduce a new flags NGQF_QREADER and NGQF_QWRITER,
which tell how the item should be actually applied,
overriding NGQF_READER/NGQF_WRITER flags.
- Do not differ between pending reader or writer. Use only
one flag that is raised, when there are pending items.
- Schedule netgraph ISR in ng_queue_rw(), so that callers
do not need to do this job.
- Fix several comments.
Submitted by: julian
- Prefer '_' to ' ', as it results in more easily parsed results in
memory monitoring tools such as vmstat.
- Remove punctuation that is incompatible with using memory type names
as file names, such as '/' characters.
- Disambiguate some collisions by adding subsystem prefixes to some
memory types.
- Generally prefer lower case to upper case.
- If the same type is defined in multiple architecture directories,
attempt to use the same name in additional cases.
Not all instances were caught in this change, so more work is required to
finish this conversion. Similar changes are required for UMA zone names.
following the protocol pru_listen() call to solisten_proto(), so
that it occurs under the socket lock acquisition that also sets
SO_ACCEPTCONN. This requires passing the new backlog parameter
to the protocol, which also allows the protocol to be aware of
changes in queue limit should it wish to do something about the
new queue limit. This continues a move towards the socket layer
acting as a library for the protocol.
Bump __FreeBSD_version due to a change in the in-kernel protocol
interface. This change has been tested with IPv4 and UNIX domain
sockets, but not other protocols.
provided in the kernel build directory, fix modules that were
failing to build this way due to not quite correct kernel option
usage. In particular:
ng_mppc.c uses two complementary options, both of which are listed
in sys/conf/files. Ideally, there should be a separate option for
including ng_mppc.c in kernel build, but now only
NETGRAPH_MPPC_ENCRYPTION is usable anyway, the other one requires
proprietary files.
nwfs and smbfs were trying to ensure they were built with proper
network components, but the check was rather questionable.
Discussed with: ru
- move the function pointer definitions to if_bridgevar.h
- move most of the logic to the new BRIDGE_INPUT and BRIDGE_OUTPUT macros
- remove unneeded functions from if_bridgevar.h and sort a little.
semantics, and then was reused for next node, it still would be applied
as writer again.
To fix the regression the decision is made never to alter item->el_flags
after the item has been allocated. This requires checking for overrides
both in ng_dequeue() and in ng_snd_item().
Details:
- Caller of the ng_apply_item() knows what is the current access to
node and specifies it to ng_apply_item(). The latter drops the
given access after item has beem applied.
- ng_dequeue() needs to be supplied with int pointer, where it stores
the obtained access on node.
- Check for node/hook access overrides in ng_dequeue().
http://lists.freebsd.org/pipermail/cvs-src/2004-October/033496.html
The same problem applies to if_bridge(4), too.
- Copy-and-paste the if_bridge(4) related block from
if_ethersubr.c to ng_ether.c
- Add XXXs, so that copy-and-paste would be noticed by
any future editors of this code.
- Also add XXXs near if_bridge(4) declarations.
Silence from: thompsa
replacement and has additional features which make it superior.
Discussed on: -arch
Reviewed by: thompsa
X-MFC-after: never (RELENG_6 as transition period)
times consequently, without checking whether callout has been serviced
or not. (ng_pptpgre and ng_ppp were catched in this behavior).
- In ng_callout() save old item before calling callout_reset(). If the
latter has returned 1, then free this item.
- In ng_uncallout() clear c->c_arg.
Problem reported by: Alexandre Kardanev
First, mutexed callouts are incompatible with netgraph nodes, because
netgraph(4) can guarantee that the function will be called with mutex
held.
Second, nodes should not send data to their neighbor holding their
mutex. A node does not know what stack can it enter sending data in
some direction. May be executing will encounter a place to sleep.
New locking:
- ng_pptpgre_recv() and ng_pptpgre_xmit() must be entered with mutex held.
- ng_pptpgre_recv() and ng_pptpgre_xmit() unlock mutex before
sending data and then return unlocked.
- callout routines acquire mutex themselves.
does not clear m_nextpkt for us. The mbufs are sent into netgraph and
then, if they contain a TCP packet delivered locally, they will enter
socket code again. They can pass the first assert in sbappendstream()
because m_nextpkt may be set not in the first mbuf, but deeper in the
chain. So the problem will trigger much later, when local program
reads the data from socket, and an mbuf with m_nextpkt becomes a
first one.
This bug was demasked by revision 1.54, when I made upcall queueable.
Before revision 1.54 there was a very small probability to have 2
mbufs in GRE socket buffer, because ng_ksocket_incoming2() dequeued
the first one immediately.
- in ng_ksocket_incoming2() clear m_nextpkt on all mbufs
read from socket.
- restore rev. 1.54 change in ng_ksocket_incoming().
PR: kern/84952
PR: kern/82413
In collaboration with: rwatson
