efivar_device_path_to_unix_path translates from UEFI to Unix
efivar_unix_path_to_device_path translates from Unix to UEFI
At present, only HD() device types are supported (both GPT and
MBR). CdRom and floppy devices aren't supported. ZFS isn't supported
because there's no way in the UEFI standard to specify a ZFS datastore.
Network devices aren't supported either.
Three forms of Unix path are accepted: /path/to/file (for a mounted
filesystem), //path/to/file (uses the EFI partition on the same disk
as /), and dev:/path/to/file (for unmounted filesystem). Two forms are
produced (the first and last).
Sponsored by: Netflix
system calls. Man pages are missing for v2 and v5, so any entries for
those versions were inferred by new implementations of these functions
in libc.
Obtained from: http://www.tuhs.org/cgi-bin/utree.pl
It would previously return negative zero for -0.0 since -0.0 does not
compare less than 0. The issue was discovered when running the libc++
test suite on softfloat MIPS64.
I have verified that both clang and GCC generate sensible code for the
builtin. For soft float they clear the sign bit using integer operations
and in hard float mode they use abs.d.
Reviewed by: #mips, jhb, brooks, imp, emaste
Approved by: jhb (mentor)
Differential Revision: https://reviews.freebsd.org/D13135
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using mis-identified many licenses so this was mostly a manual - error
prone - task.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using mis-identified many licenses so this was mostly a manual - error
prone - task.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
- Add a new KTR_STRUCT_ARRAY ktrace record type which dumps an array of
structures.
The structure name in the record payload is preceded by a size_t
containing the size of the individual structures. Use this to
replace the previous code that dumped the kevent arrays dumped for
kevent(). kdump is now able to decode the kevent structures rather
than dumping their contents via a hexdump.
One change from before is that the 'changes' and 'events' arrays are
not marked with separate 'read' and 'write' annotations in kdump
output. Instead, the first array is the 'changes' array, and the
second array (only present if kevent doesn't fail with an error) is
the 'events' array. For kevent(), empty arrays are denoted by an
entry with an array containing zero entries rather than no record.
- Move kevent decoding tables from truss to libsysdecode.
This adds three new functions to decode members of struct kevent:
sysdecode_kevent_filter, sysdecode_kevent_flags, and
sysdecode_kevent_fflags.
kdump uses these helper functions to pretty-print kevent fields.
- Move structure definitions for freebsd11 and freebsd32 kevent
structures to <sys/event.h> so that they can be shared with userland.
The 32-bit structures are only exposed if _WANT_KEVENT32 is defined.
The freebsd11 structures are only exposed if _WANT_FREEBSD11_KEVENT is
defined. The 32-bit freebsd11 structure requires both.
- Decode freebsd11 kevent structures in truss for the compat11.kevent()
system call.
- Log 32-bit kevent structures via ktrace for 32-bit compat kevent()
system calls.
- While here, constify the 'void *data' argument to ktrstruct().
Reviewed by: kib (earlier version)
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D12470
sa(4) has some unique behavior that is special-cased in cam_get_device. The
existing tests don't provide coverage for this special case.
Reviewed by: ken
MFC after: 3 weeks
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D13185
Add some rules to more closely match what illumos does when an address
resolves to multiple symbols:
- prefer non-local symbols
- prefer symbols with fewer leading underscores and no leading '$'
Add some regression tests to verify these rules.
* Wrongly matches strings that are shorter than the pattern
* Fails to match negative character sets
* Fails to match character sets that aren't at the end of the pattern
* Fails to match character ranges
Reviewed by: imp
MFC after: 3 weeks
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D13173
Previously it was enabled by WITH_/WITHOUT_TOOLCHAIN, but it is commonly
expected to be available and may have non-toolchain consumers. As it
is now taken from the BSD-licensed ELF Tool Chain project, just install
it unconditionally.
PR: 213665, 223725
Reviewed by: bdrewery
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D8398
Mainly focus on files that use BSD 3-Clause license.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
Special thanks to Wind River for providing access to "The Duke of
Highlander" tool: an older (2014) run over FreeBSD tree was useful as a
starting point.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
Special thanks to Wind River for providing access to "The Duke of
Highlander" tool: an older (2014) run over FreeBSD tree was useful as a
starting point.
Initially, only tag files that use BSD 4-Clause "Original" license.
RelNotes: yes
Differential Revision: https://reviews.freebsd.org/D13133
Do not use macros in the -width of a .Bl, since mandoc does not support them.
Fix issues reported by igor and mandoc -Tlint.
Use a .Bl for list of clock IDs instead of a comma list.
MFC after: 3 days
Sponsored by: Dell EMC
Add notes to each of these that specifically state that results are
undefined if the strings overlap. In the case of memcpy, we document
the overlapping behavior on FreeBSD (pre-existing). For str*, it is
left unspecified, however, since the default (and x86) implementations
do not handle overlapping strings properly.
PR: 223653
Sponsored by: Netflix
syslog in libc secretly reconnects to the daemon.
Another issue is that we don't have any information from openlog(3) if we
succeeded to open log or not so we don't know if we are ready
to enter cabability mode.
Because all of that we decided we need a syslog service for Caspser.
Reviewed by: bapt@
Differential Revision: https://reviews.freebsd.org/D12824
function, so check if cap_chanel_t is NULL is not enough.
Casper with a normal libc will still fail in capability mote so let's not
enter capability mode without casper support when we need to resolve DNS.
Reviewed by: cem
Differential Revision: https://reviews.freebsd.org/D12823
This API allows callers to enumerate all known pages, including any
direct map & kernel map virtual addresses, physical addresses, size,
offset into the core, & protection configured.
For architectures that support direct map addresses, also generate pages
for any direct map only addresses that are not associated with kernel
map addresses.
Fix page size portability issue left behind from previous kvm page table
lookup interface.
Reviewed by: jhb
Sponsored by: Backtrace I/O
Differential Revision: https://reviews.freebsd.org/D12279
We started out having Linux compatible libefivar interfaces. This was
in anticipation of porting the GPL'd efibootmgr to FreeBSD via a
port. However, since we need that functionality in the base, that port
isn't going to happened. It also appears that efivar is a private
library that's not used much outside a command line util and
efibootmgr. Reduce compatibility with the Linux version a little by
removing the mode parameter to efi_set_variable (which was unused on
FreeBSD, and not set to something useful in the code we'd
written). Also remove some efi error routines that were never
implemented and existed only to placate early GPL efibootmgr porting
experiments.
Suggested by: Matt Williams
Sponsored by: Netflix
This allows the _SKIP_DEPEND optimization to work, avoiding reading
the files when not needed. It also fixes META_MODE incorrectly
reading these files when not needed.
Sponsored by: Dell EMC Isilon
