most cases NULL is passed, but in some cases such as network driver locks
(which use the MTX_NETWORK_LOCK macro) and UMA zone locks, a name is used.
Tested on: i386, alpha, sparc64
general cleanup of the API. The entire API now consists of two functions
similar to the pre-KSE API. The suser() function takes a thread pointer
as its only argument. The td_ucred member of this thread must be valid
so the only valid thread pointers are curthread and a few kernel threads
such as thread0. The suser_cred() function takes a pointer to a struct
ucred as its first argument and an integer flag as its second argument.
The flag is currently only used for the PRISON_ROOT flag.
Discussed on: smp@
new vfs_getopt()/vfs_copyopt() API. This is intended to be used
later, when there will be filesystems implementing the VFS_NMOUNT
operation. The mount(2) system call will disappear when all
filesystems will be converted to the new API. Documentation will
be committed in a while.
Reviewed by: phk
The use of the zone allocator may or may not be overkill.
There is an XXX: over in ufs/ufs/ufs_vnops.c that jlemon may need
to revisit.
This shaves about 60 bytes of struct vnode which on my laptop means
600k less RAM used for vnodes.
this is a low-functionality change that changes the kernel to access the main
thread of a process via the linked list of threads rather than
assuming that it is embedded in the process. It IS still embeded there
but remove all teh code that assumes that in preparation for the next commit
which will actually move it out.
Reviewed by: peter@freebsd.org, gallatin@cs.duke.edu, benno rice,
call VOP_INACTIVE before placing the vnode back on the free list.
Otherwise there is a race condition on SMP machines between
getnewvnode() locking the vnode to reclaim it and vrele()
locking the vnode to inactivate it. This window of vulnerability
becomes exaggerated in the presence of filesystems that have
been suspended as the inactive routine may need to temporarily
release the lock on the vnode to avoid deadlock with the syncer
process.
operation. The vgonel() code has always called vclean() but until we
started proactively freeing vnodes it would never actually be called with
a dirty vnode, so this situation did not occur prior to the vnlru() code.
Now that we proactively free vnodes when kern.maxvnodes is hit, however,
vclean() winds up with work to do and improperly generates the warnings.
Reviewed by: peter
Approved by: re (for MFC)
MFC after: 1 day
involving file removal or file update were not always being fully
committed to disk. The result was lost files or corrupted file data.
This change ensures that the filesystem is properly synced to disk
before the filesystem is down-graded.
This delta also fixes a long standing bug in which a file open for
reading has been unlinked. When the last open reference to the file
is closed, the inode is reclaimed by the filesystem. Previously,
if the filesystem had been down-graded to read-only, the inode could
not be reclaimed, and thus was lost and had to be later recovered
by fsck. With this change, such files are found at the time of the
down-grade. Normally they will result in the filesystem down-grade
failing with `device busy'. If a forcible down-grade is done, then
the affected files will be revoked causing the inode to be released
and the open file descriptors to begin failing on attempts to read.
Submitted by: "Sam Leffler" <sam@errno.com>
We calculate a trigger point that both guarentees we will find a
sufficient number of vnodes to recycle and prevents us from recycling
vnodes with lots of resident pages. This particular section of
code is designed to recycle vnodes, not do unnecessary frees of
cached VM pages.
against VM_WAIT in the pageout code. Both fixes involve adjusting
the lockmgr's timeout capability so locks obtained with timeouts do not
interfere with locks obtained without a timeout.
Hopefully MFC: before the 4.5 release
the shutdown request at reboot/halt time.
Disable the printf 'vnlru process getting nowhere, pausing...' and instead
export the count to the debug.vnlru_nowhere sysctl.
by me to make it more efficient. The original code had serious balancing
problems and could also deadlock easily. This code relegates the vnode
reclamation to its own kproc and relaxes the vnode reclamation requirements
to better maintain kern.maxvnodes. This code still doesn't balance as well
as it could, but it does a much better job then the original code.
Approved by: re@freebsd.org
Obtained from: ps, peter, dillon
MFS Assuming: Assuming no problems crop up in Yahoo testing
MFC after: 7 days
structure changes now rather then piecemeal later on. mnt_nvnodelist
currently holds all the vnodes under the mount point. This will eventually
be split into a 'dirty' and 'clean' list. This way we only break kld's once
rather then twice. nvnodelist will eventually turn into the dirty list
and should remain compatible with the klds.
o POSIX.1e capabilities authorize overriding of VEXEC for VDIR based
on CAP_DAC_READ_SEARCH, but of !VDIR based on CAP_DAC_EXECUTE. Add
appropriate conditionals to vaccess() to take that into account.
o Synchronization cap_check_xxx() -> cap_check() change.
Obtained from: TrustedBSD Project
real effect.
Optimize vfs_msync(). Avoid having to continually drop and re-obtain
mutexes when scanning the vnode list. Improves looping case by 500%.
Optimize ffs_sync(). Avoid having to continually drop and re-obtain
mutexes when scanning the vnode list. This makes a couple of assumptions,
which I believe are ok, in regards to vnode stability when the mount list
mutex is held. Improves looping case by 500%.
(more optimization work is needed on top of these fixes)
MFC after: 1 week
wait for both read AND write I/O to complete. Only NFS calls vinvalbuf()
on an active vnode (when the server indicates that the file is stale), so
this bug fix only effects NFS clients.
MFC after: 3 days
to avoid removing higher level directory vnodes from the namecache has
no perceivable effect and will be removed. This is especially true
when vmiodirenable is turned on, which it is by default now. ( vmiodirenable
makes a huge difference in directory caching ). The vfs.vmiodirenable and
vfs.nameileafonly sysctls have been left in to allow further testing, but
I expect to rip out vfs.nameileafonly soon too.
I have also determined through testing that the real problem with numvnodes
getting too large is due to the VM Page cache preventing the vnode from
being reclaimed. The directory stuff made only a tiny dent relative
to Poul's original code, enough so that some tests succeeded. But tests
with several million small files show that the bigger problem is the VM Page
cache. This will have to be addressed by a future commit.
MFC after: 3 days
Note ALL MODULES MUST BE RECOMPILED
make the kernel aware that there are smaller units of scheduling than the
process. (but only allow one thread per process at this time).
This is functionally equivalent to teh previousl -current except
that there is a thread associated with each process.
Sorry john! (your next MFC will be a doosie!)
Reviewed by: peter@freebsd.org, dillon@freebsd.org
X-MFC after: ha ha ha ha
file. ffs will discard any pending dirty pages when it is closed,
so we may as well not waste time trying to clean them. This doesn't
stop other things from writing it out, eg: pageout, fsync(2) etc.
VM caching of disks through mmap() and stopping syncing of open files
that had their last reference in the fs removed (ie: their unsync'ed
pages get discarded on close already, so I made it stop syncing too).
(this commit is just the first stage). Also add various GIANT_ macros to
formalize the removal of Giant, making it easy to test in a more piecemeal
fashion. These macros will allow us to test fine-grained locks to a degree
before removing Giant, and also after, and to remove Giant in a piecemeal
fashion via sysctl's on those subsystems which the authors believe can
operate without Giant.
vm_mtx does not recurse and is required for most low level
vm operations.
faults can not be taken without holding Giant.
Memory subsystems can now call the base page allocators safely.
Almost all atomic ops were removed as they are covered under the
vm mutex.
Alpha and ia64 now need to catch up to i386's trap handlers.
FFS and NFS have been tested, other filesystems will need minor
changes (grabbing the vm lock when twiddling page properties).
Reviewed (partially) by: jake, jhb
the number of references on the filesystem root vnode to be both
expected and released. Many filesystems hold an extra reference on
the filesystem root vnode, which must be accounted for when
determining if the filesystem is busy and then released if it isn't
busy. The old `skipvp' approach required individual filesystem
xxx_unmount functions to re-implement much of vflush()'s logic to
deal with the root vnode.
All 9 filesystems that hold an extra reference on the root vnode
got the logic wrong in the case of forced unmounts, so `umount -f'
would always fail if there were any extra root vnode references.
Fix this issue centrally in vflush(), now that we can.
This commit also fixes a vnode reference leak in devfs, which could
result in idle devfs filesystems that refuse to unmount.
Reviewed by: phk, bp
KASSERT when vp->v_usecount is zero or negative. In this case, the
"v*: negative ref cnt" panic that follows is much more appropriate.
Reviewed by: mckusick
to struct mount.
This makes the "struct netexport *" paramter to the vfs_export
and vfs_checkexport interface unneeded.
Consequently that all non-stacking filesystems can use
vfs_stdcheckexp().
At the same time, make it a pointer to a struct netexport
in struct mount, so that we can remove the bogus AF_MAX
and #include <net/radix.h> from <sys/mount.h>
available.
Only directory vnodes holding no child directory vnodes held in
v_cache_src are recycled, so that directory vnodes near the root of
the filesystem hierarchy remain in namecache and directory vnodes are
not reclaimed in cascade.
The period of vnode reclaiming attempt and the number of vnodes
attempted to reclaim can be tuned via sysctl(2).
Suggested by: tegge
Approved by: phk
VOP_BWRITE() was a hack which made it possible for NFS client
side to use struct buf with non-bio backing.
This patch takes a more general approach and adds a bp->b_op
vector where more methods can be added.
The success of this patch depends on bp->b_op being initialized
all relevant places for some value of "relevant" which is not
easy to determine. For now the buffers have grown a b_magic
element which will make such issues a tiny bit easier to debug.
actually in the kernel. This structure is a different size than
what is currently in -CURRENT, but should hopefully be the last time
any application breakage is caused there. As soon as any major
inconveniences are removed, the definition of the in-kernel struct
ucred should be conditionalized upon defined(_KERNEL).
This also changes struct export_args to remove dependency on the
constantly-changing struct ucred, as well as limiting the bounds
of the size fields to the correct size. This means: a) mountd and
friends won't break all the time, b) mountd and friends won't crash
the kernel all the time if they don't know what they're doing wrt
actual struct export_args layout.
Reviewed by: bde
mtx_enter(lock, type) becomes:
mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks)
mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized)
similarily, for releasing a lock, we now have:
mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN.
We change the caller interface for the two different types of locks
because the semantics are entirely different for each case, and this
makes it explicitly clear and, at the same time, it rids us of the
extra `type' argument.
The enter->lock and exit->unlock change has been made with the idea
that we're "locking data" and not "entering locked code" in mind.
Further, remove all additional "flags" previously passed to the
lock acquire/release routines with the exception of two:
MTX_QUIET and MTX_NOSWITCH
The functionality of these flags is preserved and they can be passed
to the lock/unlock routines by calling the corresponding wrappers:
mtx_{lock, unlock}_flags(lock, flag(s)) and
mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN
locks, respectively.
Re-inline some lock acq/rel code; in the sleep lock case, we only
inline the _obtain_lock()s in order to ensure that the inlined code
fits into a cache line. In the spin lock case, we inline recursion and
actually only perform a function call if we need to spin. This change
has been made with the idea that we generally tend to avoid spin locks
and that also the spin locks that we do have and are heavily used
(i.e. sched_lock) do recurse, and therefore in an effort to reduce
function call overhead for some architectures (such as alpha), we
inline recursion for this case.
Create a new malloc type for the witness code and retire from using
the M_DEV type. The new type is called M_WITNESS and is only declared
if WITNESS is enabled.
Begin cleaning up some machdep/mutex.h code - specifically updated the
"optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN
and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently
need those.
Finally, caught up to the interface changes in all sys code.
Contributors: jake, jhb, jasone (in no particular order)
