Otherwise on success it ontain the return value of asprintf.
Sponsored by: Beckhoff Automation GmbH & Co. KG
Fixes: 2d2950c889 ("pam_xdg: Check asprintf return value")
This is a module to setup the XDG directories and environment variables.
For now the only usage is to have a XDG_RUNTIME_DIR environment setup at
user login.
All other environment variable have a default fallback so no need to export
them in this module.
The directory is created according to the XDG Base directory specification.
The default base directory is /var/run/xdg/<username> but can be configured
using the runtime_dir=<dir> module option.
According to the spec the directory *must* not survive a reboot so adding
var_run_enable="YES" to rc.conf is highly recommanded.
Reviewed by: des, pauamma (manpages)
Differential Revision: https://reviews.freebsd.org/D44011
Sponsored by: Beckhoff Automation GmbH & Co. KG
Apply the following automated changes to try to eliminate
no-longer-needed sys/cdefs.h includes as well as now-empty
blank lines in a row.
Remove /^#if.*\n#endif.*\n#include\s+<sys/cdefs.h>.*\n/
Remove /\n+#include\s+<sys/cdefs.h>.*\n+#if.*\n#endif.*\n+/
Remove /\n+#if.*\n#endif.*\n+/
Remove /^#if.*\n#endif.*\n/
Remove /\n+#include\s+<sys/cdefs.h>\n#include\s+<sys/types.h>/
Remove /\n+#include\s+<sys/cdefs.h>\n#include\s+<sys/param.h>/
Remove /\n+#include\s+<sys/cdefs.h>\n#include\s+<sys/capsicum.h>/
Sponsored by: Netflix
The closing parenthesis was in the wrong location, so instead of assigning the return value to krbret and then comparing it to zero, we were assigning the result of the comparison to krbret and then comparing that to zero. This has no practical significance since the value is not used after the loop terminates.
PR: 229719
Reviewed by: cy
Differential Revision: https://reviews.freebsd.org/D41299
An adversary on the network can log in via ssh as any user by spoofing
the KDC. When the machine has a keytab installed the keytab is used to
verify the service ticket. However, without a keytab there is no way
for pam_krb5 to verify the KDC's response and get a TGT with the
password.
If both the password _and_ the KDC are controlled by an adversary, the
adversary can provide a password that the adversary's spoofed KDC will
return a valid tgt for. Currently, without a keytab, pam_krb5 is
vulnerable to this attack.
Reported by: Taylor R Campbell <riastradh@netbsd.org> via emaste@
Reviewed by: so
Approved by: so
Security: FreeBSD-SA-23:04.pam_krb5
Security: CVE-2023-3326
The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch
up to that fact and revert to their recommended match of BSD-2-Clause.
Discussed with: pfg
MFC After: 3 days
Sponsored by: Netflix
According to pam_exec(8), the `expose_authtok` option should be ignored
when the service function is `pam_sm_setcred`. Currently `pam_exec` only
prevent prompt for anth token when `expose_authtok` is set on
`pam_sm_setcred`. This subsequently led to segfault when there isn't an
existing auth token available.
Bug reported on this: https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=263893
After reading https://reviews.freebsd.org/rS349556 I am not sure if the
default behaviour supposed to be simply not prompt for authentication
token, or is it to ignore the option entirely as stated in the man page.
This patch is therefore only adding an additional NULL check on the item
`pam_get_item` provide, and exit with `PAM_SYSTEM_ERR` when such item is
NULL.
MFC after: 1 week
Reviewed by: des, khng
Differential Revision: https://reviews.freebsd.org/D35169
Release notes are available at https://www.openssh.com/txt/release-8.9
Some highlights:
* ssh(1), sshd(8), ssh-add(1), ssh-agent(1): add a system for
restricting forwarding and use of keys added to ssh-agent(1)
* ssh(1), sshd(8): add the sntrup761x25519-sha512@openssh.com hybrid
ECDH/x25519 + Streamlined NTRU Prime post-quantum KEX to the
default KEXAlgorithms list (after the ECDH methods but before the
prime-group DH ones). The next release of OpenSSH is likely to
make this key exchange the default method.
* sshd(8), portable OpenSSH only: this release removes in-built
support for MD5-hashed passwords. If you require these on your
system then we recommend linking against libxcrypt or similar.
Future deprecation notice
=========================
A near-future release of OpenSSH will switch scp(1) from using the
legacy scp/rcp protocol to using SFTP by default.
Legacy scp/rcp performs wildcard expansion of remote filenames (e.g.
"scp host:* .") through the remote shell. This has the side effect of
requiring double quoting of shell meta-characters in file names
included on scp(1) command-lines, otherwise they could be interpreted
as shell commands on the remote side.
MFC after: 1 month
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
Move some needed binaries/libs from FreeBSD-utilities to FreeBSD_runtime.
This is everything needed to boot to multiuser with FreeBSD-rc installed.
MFC after: 2 weeks
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D33435
Some notable changes, from upstream's release notes:
- sshd(8): Remove support for obsolete "host/port" syntax.
- ssh(1): When prompting whether to record a new host key, accept the key
fingerprint as a synonym for "yes".
- ssh-keygen(1): when acting as a CA and signing certificates with an RSA
key, default to using the rsa-sha2-512 signature algorithm.
- ssh(1), sshd(8), ssh-keygen(1): this release removes the "ssh-rsa"
(RSA/SHA1) algorithm from those accepted for certificate signatures.
- ssh-sk-helper(8): this is a new binary. It is used by the FIDO/U2F
support to provide address-space isolation for token middleware
libraries (including the internal one).
- ssh(1): this release enables UpdateHostkeys by default subject to some
conservative preconditions.
- scp(1): this release changes the behaviour of remote to remote copies
(e.g. "scp host-a:/path host-b:") to transfer through the local host
by default.
- scp(1): experimental support for transfers using the SFTP protocol as
a replacement for the venerable SCP/RCP protocol that it has
traditionally used.
Additional integration work is needed to support FIDO/U2F in the base
system.
Deprecation Notice
------------------
OpenSSH will disable the ssh-rsa signature scheme by default in the
next release.
Reviewed by: imp
MFC after: 1 month
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D29985
Add a new option to pam_unix(8), "emptyok", which makes it not prompt
for password, if it's set to an empty one. It is similar to "nullok",
which makes it not prompt for password if the hash itself is empty.
Reviewed By: markj
Sponsored By: NetApp, Inc.
Sponsored By: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D27569
lib/libpam/modules/pam_exec/pam_exec.c:222:56: error: format specifies type 'char *' but the argument has type 'const void *' [-Werror,-Wformat]
if (asprintf(&envstr, "%s=%s", pam_item_env[i].name, item) < 0)
~~ ^~~~
up to par with the Linux pam_access(8).
Like the Linux pam_access(8) our pam_login_access(8) is a service module
for pam(3) that allows a administrator to limit access from specified
remote hosts or terminals. Unlike the Linux pam_access, pam_login_access
is missing some features which are added by this commit:
Access file can now be specified. The default remains /etc/access.conf.
The syntax is consistent with Linux pam_access.
By default usernames are matched. If the username fails to match a match
against a group name is attempted. The new nodefgroup module option will
only match a username and no attempt to match a group name is made.
Group names must be specified in brackets, "()" when nodefgroup is
specified. Otherwise the old backward compatible behavior is used.
This is consistent with Linux pam_access.
A new field separator module option allows the replacement of the default
colon (:) with any other character. This facilitates potential future
specification of X displays. This is also consistent with Linux pam_access.
A new list separator module option to replace the default space/comma/tab
with another character. This too is consistent with Linux pam_access.
Linux pam_access options not implemented in this commit are the debug
and audit options. These will be implemented at a later date.
Reviewed by: bjk, bcr (for manpages)
Approved by: des (blanket, implicit)
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D23198
match the primary group a user belongs to. This commit extends the
match to secondary groups a user belongs to as well, just as the Linux
pam_access(5) does.
Approved by: des (implicit, blanket)
as in the login.access(5) man page. However strcasecmp() is used to compare
for these special strings. Because of this User accounts and groups with
the corresponding lowercase names are misintrepreted to have special
whereas they should not.
This commit fixes this, conforming to the man page and to how the Linux
pam_access(8) handles these special words.
Approved by: des (implicit, blanket)
Update a bunch of Makefile.depend files as
a result of adding Makefile.depend.options files
Reviewed by: bdrewery
MFC after: 1 week
Sponsored by: Juniper Networks
Differential Revision: https://reviews.freebsd.org/D22494
Leaf directories that have dependencies impacted
by options need a Makefile.depend.options file
to avoid churn in Makefile.depend
DIRDEPS for cases such as OPENSSL, TCP_WRAPPERS etc
can be set in local.dirdeps-options.mk
which can add to those set in Makefile.depend.options
See share/mk/dirdeps-options.mk
Reviewed by: bdrewery
MFC after: 1 week
Sponsored by: Juniper Networks
Differential Revision: https://reviews.freebsd.org/D22469
- Implement use_first_pass, allowing expose_password to be used by other
service functions than pam_auth() without prompting a second time.
- Don't prompt for a password during pam_setcred().
PR: 238041
MFC after: 3 weeks
passing the authentication token to the external program.
Approved by: re (kib)
Submitted by: Thomas Munro <munro@ip9.org>
MFC after: 1 week
Differential Revision: D16950
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using mis-identified many licenses so this was mostly a manual - error
prone - task.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
Mainly focus on files that use BSD 3-Clause license.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
Special thanks to Wind River for providing access to "The Duke of
Highlander" tool: an older (2014) run over FreeBSD tree was useful as a
starting point.
