Polling is currently only implemented in the xhci pci attachment.
Adding it to dwc3 doesn't make it much uglier, and supporting it can be
useful for confirming that hardware's otherwise functional when
interrupts are apparently not firing.
Reviewed by: manu
Differential Revision: https://reviews.freebsd.org/D38816
On Apple Silicon systems, E2H can't actually be cleared; we're stuck
with it. Check it again when we're setting up CPTR_EL2 and set FPEN
appropriately to avoid later trapping to EL2 on writes to SIMD
registers.
Reviewed by: andrew
Differential Revision: https://reviews.freebsd.org/D38819
It has no effect, and an exp-run revealed that it is not in use.
PR: 261398 (exp-run)
Reviewed by: mjg, glebius
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D38822
In preparation for the removal of the IP_RSS_LISTEN_BUCKET socket
option.
PR: 261398 (exp-run)
Reviewed by: glebius
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D38821
Reflect the fact that ipfilter was moved from contrib to netpfil
on December 20, 2021 by 3b9b51fe46. And that ipfilter userland
was moved from contrib to sbin/ipf by 41edb306f0 that same day.
This corrects a bug in which the daily periodic script '310.accounting'
attempts to rotate logs via /etc/rc.d/accounting by calling
onerotate_logs function. The rotate logs function turns accounting back
on regardless of what acccounting_enable is set to in /etc/rc.conf. This
is due to checkyesno always returning YES since rotate logs is called
with the 'one' prefix.
In effect, accounting will always be turned back on once a day even if
it is disabled and stopped by hand. The fix was simple, just check if
accounting is before rotating logs and if it is, don't attempt the
rotate.
PR: 267464
Reviewed by: imp, hps (lgtm, not approval), Mina Galić
Pull Request: https://github.com/freebsd/freebsd-src/pull/648
Differential Revision: https://reviews.freebsd.org/D37434
Do not pass the pointer to our valid mbuf to pfil(9). Pass an
uninitialized one only. This was unsafe with the old KPI, too,
but for some reason didn't fail.
Fixes: caf32b260a
Fix mandoc -Tlint style issues
* Use Pa instead of Va for .conf element (mdoc warned the Va was unused, and its the
wrong markup anyway)
* Drop useless Va and use Va instead of Ar when referring to variables in the jail file
* One sentence, one line
* drop xr to info(1). That makes no sense, and intro(1) seems unhelpful.
This leaves two warnings: gdb(1) xref not found (but we add a
parenthetical about the package) and a false positive about
a trailing period that is being mistaken for a 'full stop'
when it is really just a character in a filename.
Sponsored by: Netflix
The growfs_fstab script has been testing dumpdev, and if it is AUTO,
enables dumps on the newly-added swap device for the initial boot.
However, dumpdev defaults to AUTO on main, but NO on stable/13 and
release branches. On the other hand, bsdinstall adds dumpdev="AUTO"
by default (controlled by a menu item). bsdinstall is not used when
booting an SD card or other disk image. Adopt the default from
bsdinstall, and set dumpdev to AUTO in /etc/rc.conf in the
growfs_fstab script if a swap partition has been added, along with
the explanatory comment added by bsdinstall.
Differential Revision: https://reviews.freebsd.org/D38751
This error occurs because vm->vcpu[1] has not been allocated yet when
vm_snapshot_vm() is called.
To fix this, move spinup_vcpu() before restore code.
Reviewed by: corvink, markj
MFC after: 2 weeks
Sponsored by: vStack
Differential Revision: https://reviews.freebsd.org/D38477
vmx_snapshot() and svm_snapshot() do not save any data and error occurs at
resume:
Restoring kernel structs...
vm_restore_kern_struct: Kernel struct size was 0 for: vmx
Failed to restore kernel structs.
Reviewed by: corvink, markj
Fixes: 39ec056e6d ("vmm: Rework snapshotting of CPU-specific per-vCPU data.")
MFC after: 2 weeks
Sponsored by: vStack
Differential Revision: https://reviews.freebsd.org/D38476
After suspend/resume Ubuntu 20.04 and 22.04 installer can hang if
tsc-early clocksource has a big skew.
Reviewed by: corvink, jhb
Fixes: a7db532e3a ("vmm: Simplify saving of absolute TSC values in snapshots.")
MFC after: 2 weeks
Sponsored by: vStack
Differential Revision: https://reviews.freebsd.org/D38474
Qemu defines some common fwcfg items. We don't need to support all of
them. Only a subset needs to be present for fwcfg to work properly.
- signature
The signature is used by the guest to check if qemu's fwcfg is
available or not.
- id
The id is used by the guest to check which features are supported by
the fwcfg implementation of the hypervisor.
- file_dir
The file dir reports all fwcfg items which don't have a fixed index.
These are mostly user defined fwcfg items.
Reviewed by: <If someone else reviewed your modification.>
MFC after: 1 week
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D38335
This helper makes it easier to add multiple fwcfg items. You can pass an
index and some data to the helper. The helper adds these information to
the fwcfg emulation so that the guest reads the given data on the
specified index.
Reviewed by: <If someone else reviewed your modification.>
MFC after: 1 week
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D38334
Current implementation utilize off-by-one struct prison_ip to access the
IPv[46] addresses. It is error prone and hence comes the regression fix
21ad3e27fa and ddbf879d79. Use flexible array member so that compiler
will catch such errors and it will also be easier to review.
No functional change intended.
Reviewed by: melifaro, glebius
Differential Revision: https://reviews.freebsd.org/D37874
This fixes duplicate mails (one from cron, one from periodic)
when a periodic run is not finished bfore the next one starts.
The man page states that the intended use case is cron, and
the error handling of the lockf invocation handles this case
explicitely, as such no error message for the "interactive"
use was considered.
When there's an open PR and/or a Differential Revision, people
evaluating the pull request will want to look at them. Suggest that the
submitter include this information to make it easier to process.
Sponsored by: Netflix
Create a slightly longer version of the inforamtion available in the
handbook in the file that Github displays for more information about
contributing.
Sponsored by: Netflix
Replace a cast '0' for a null pointers with NULL
Replace a 'goto loop' with a do-while loop in ufs and ext2fs.
Cast cp pointer to uintptr_t to test to see if it's aligned rather than long.
[ minor tweaks based on my & hps' review, reworded commit message ]
Reviewed by: imp, hps
Pull Request: https://github.com/freebsd/freebsd-src/pull/547
There exists hardware that has no ethernet address burned into
the EEPROM. Loading if_re on such a HW brings the device up
with '00:00:00:00:00:00' as the address, and that doesn't get
you too far in a real network.
PR: 262406
Reviewed by: imp
Pull Request: https://github.com/freebsd/freebsd-src/pull/670
Signed-off-by: Evgeni Golov <evgeni@debian.org>
Differential Revision: https://reviews.freebsd.org/D34485
The comment above bintime2timespec() says:
When converting between timestamps on parallel timescales of differing
resolutions it is historical and scientific practice to round down.
However, the delta_nsec value is a time difference and not a timestamp. Also
the rounding errors accumulate in the frequency accumulator, see hardpps().
So, rounding to the closest integer is probably slightly better.
Reviewed by: imp
Pull Request: https://github.com/freebsd/freebsd-src/pull/604
Let A be the current calculation of the frequency accumulator (pps_fcount)
update in pps_event()
scale = (uint64_t)1 << 63;
scale /= captc->tc_frequency;
scale *= 2;
bt.sec = 0;
bt.frac = 0;
bintime_addx(&bt, scale * tcount);
bintime2timespec(&bt, &ts);
hardpps(tsp, ts.tv_nsec + 1000000000 * ts.tv_sec);
and hardpps(..., delta_nsec):
u_nsec = delta_nsec;
if (u_nsec > (NANOSECOND >> 1))
u_nsec -= NANOSECOND;
else if (u_nsec < -(NANOSECOND >> 1))
u_nsec += NANOSECOND;
pps_fcount += u_nsec;
This change introduces a new calculation which is slightly simpler and more
straight forward. Name it B.
Consider the following sample values with a tcount of 2000000100 and a
tc_frequency of 2000000000 (2GHz).
For A, the scale is 9223372036. Then scale * tcount is 18446744994337203600
which is larger than UINT64_MAX (= 18446744073709551615). The result is
920627651984 == 18446744994337203600 % UINT64_MAX. Since all operands are
unsigned the result is well defined through modulo arithmetic. The result of
bintime2timespec(&bt, &ts) is 49. This is equal to the correct result
1000000049 % NANOSECOND.
In hardpps(), both conditional statements are not executed and pps_fcount is
incremented by 49.
For the new calculation B, we have 1000000000 * tcount is 2000000100000000000
which is less than UINT64_MAX. This yields after the division with tc_frequency
the correct result of 1000000050 for delta_nsec.
In hardpps(), the first conditional statement is executed and pps_fcount is
incremented by 50.
This shows that both methods yield roughly the same results. However, method B
is easier to understand and requires fewer conditional statements.
Reviewed by: imp
Pull Request: https://github.com/freebsd/freebsd-src/pull/604
Use local variables for the captured timehand and timecounter in pps_event().
This fixes a potential issue in the nsec preparation for hardpps(). Here the
timecounter was accessed through the captured timehand after the generation was
checked.
Make a snapshot of the relevent timehand values early in pps_event(). Check
the timehand generation only once during the capture and event processing. Use
atomic_thread_fence_acq() similar to the other readers.
Reviewed by: imp
Pull Request: https://github.com/freebsd/freebsd-src/pull/604
- Remove write-only variables, or hide them in cases where their use is
conditional or commented out.
- Check for errors from cmd_apply() in nmreplay.
- Use ANSI C definitions.
Reviewed by: vmaffione
MFC after: 2 weeks
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D38752
If NANO_LAYOUT is set, then use /usr/obj/nanobsd.${NANO_NAME}.${NANO_LAYOUT}
instead of the current /usr/obj/nanobsd.${NANO_NAME} to allow multiple layouts
to be built w/o errors due to the time-skew that creates.
PR: 269366
Suggested by: Eugene Grosbein
Sponsored by: Netflix
Rephrase double negated sentences to improve readability
OpenBSD has done the same in the past to their man 3 daemon
Reviewed by: imp
Pull Request: https://github.com/freebsd/freebsd-src/pull/671
This option was added in commit 0a100a6f1e but was never completed.
In particular, there is no logic to map flowids to different listening
sockets, so it accomplishes basically the same thing as SO_REUSEPORT.
Meanwhile, we've since added SO_REUSEPORT_LB, which at least tries to
balance among listening sockets using a hash of the 4-tuple and some
optional NUMA policy.
The option was never documented or completed, and an exp-run revealed
nothing using it in the ports tree. Moreover, it complicates the
already very complicated in_pcbbind_setup(), and the checking in
in_pcbbind_check_bindmulti() is insufficient. So, let's remove it.
PR: 261398 (exp-run)
Reviewed by: glebius
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D38574
In preparation for the removal of the IP(V6)_BINDMULTI option.
PR: 261398 (exp-run)
Reviewed by: glebius
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D38574