Commit graph

5064 commits

Author SHA1 Message Date
Bruce Evans 85ae1cf1dc Remove `MKDEP= -p'. Now I know why lkm compiled so fast after headers
are changed.
1995-01-01 21:11:55 +00:00
Rodney W. Grimes 1f2cdfec28 Add missing ${DESTDIR} so that the library ends up in a release.
Remove mkdir -p, this is handled by make hierarchy.
Add NOOBJ= to override obj: target, and remove local obj: target.
1995-01-01 20:30:56 +00:00
Andrey A. Chernov c9c9b4072b Preset ac_cv_path_CC="${CC}" before running ./configure,
needed for Autoconf 2
1995-01-01 20:06:20 +00:00
Bruce Evans 9fb166971e Change adduser to adding_user in Makefile too.
I hate cvs's (nonexistent) handling of name changes
`cvs log adding_user.8' fails to show any relation to adduser.8...
1995-01-01 17:31:01 +00:00
Bruce Evans 47bcf800c3 Fix previous commit. Installing links to manpages without installing
manpages is not completely trivial.

Please don't commit untested changes.
1995-01-01 17:21:09 +00:00
Bruce Evans 2e8e965294 Fix previous commit. 1995-01-01 17:14:45 +00:00
David Greenman 84bcd8659a Possible fix for NE2000 problems...the remote byte count wasn't word
aligned even though the transfers are 16bit.
1995-01-01 06:38:14 +00:00
David Greenman c38c2f7f9b Get rid of unused variable. 1995-01-01 03:54:34 +00:00
Andrey A. Chernov 8c57ee9a12 Move BSD adduser manpage (procedure description) to adding_user.8
to not confuse with adduser.8 command
1994-12-31 22:53:41 +00:00
Gary Clark II b6490eb503 Add mlinks for man page
Reviewed by:
Submitted by:
Obtained from:
1994-12-31 21:10:46 +00:00
Andreas Schulz d3287e7c11 Change the errors in the XT_KEYBOARD patch. red in the face. Thanks Bruce. 1994-12-31 20:34:19 +00:00
Justin T. Gibbs 53a69701bc Handle both channels of Twin channeled devices. Respect the configuration
values for syncronous negotiation.  The 284x series adaptors can now be
supported without the Bios being enabled.  If you disable the Bios on the
274x series adaptors, all configuration parameters revert to the default
since there is no way to retrieve them.
1994-12-31 19:31:56 +00:00
Justin T. Gibbs 58e4304e3d Handle the aic7770 driver's dependancies correctly.
YOU MUST REBUILD CONFIG.
1994-12-31 19:27:29 +00:00
Justin T. Gibbs 8ff1d93efb Update the sequencer code to handle both channels of Twin channel devices.
You can now sling 14 devices off of a 274xT.  In the process of adding
twin channel support, I removed all evident restrictions on supporting
Wide channeled devices, but I do not have a Wide controller to test them
on.

aic7770_seq.h, the pre-compiled header, is no longer needed since config
handles this dependancy.
1994-12-31 19:26:54 +00:00
Justin T. Gibbs 528486881b Allow config to fully handle the aic7770 driver dependancies. 1994-12-31 19:23:10 +00:00
Andreas Schulz 02cb5cc4bf Add the sys/types.h include to the necessary documented includes for the
getrusage call.
1994-12-31 18:50:57 +00:00
Jordan K. Hubbard 00ed485bc4 Really provide support for 3COM cards now.
Submitted by:	wpaul
1994-12-31 17:16:50 +00:00
Jordan K. Hubbard 95da7f140e Another part of Bill Paul's fix to swapgeneric to properly use the -a flag.
Submitted by:	wpaul
1994-12-31 17:15:16 +00:00
Jordan K. Hubbard dd4a485085 From Bill Paul:
- /sys/i386/i386/swapgeneric.c is just plain broke. But fear not, for I
  have unbroken it. One thing that swapgeneric.c does is walk through the
  list of configured devices searching for a boot device. The only easy
  way to accomplish this in 2.0 is to use Garret Wollman's kern_devconf
  stuff. *BUT*, the head of the kern_devconf linked list (dc_list) is declared
  static in /sys/kern/kern_devconf.c. This means that swapgeneric.c can't
  see it at link time. I had to remove the 'static' keyword to get around
  this little problem. I hope this doesn't break anything anywhere.

  *Furthermore,* there's a small matter of making the call to setconf()
  in swapgeneric.c disappear when 'config kernel swap generic' isn't used.
  You could change /sbin/config to create a dummy setconf() function in
  swapkernel.c, but that seems messy somehow. (It's also someting of an
  'it isn't broken, why are you fixing it' situation.) My solution was to
  do what the NetBSD people did and put an #ifdef GENERIC around the call
  to setconf(). If your kernel is called GENERIC or you define 'options
  GENERIC,' then you can use 'config kernel swap generic' and it'll work.

  That aside, the upshot is that: a) swapgeneric.c actually works, and
  and b) the -a boot flag now works as well. If you boot with -a, as in
  "Boot: wd(0,a)/kernel -a" you will be presented with a 'root device?'
  prompt after the autoconfig phase, at which point you can specify what
  device you want mounted as root. Regrettably, you can't specify an NFS
  filesystem. Yet. Three files are affected: /sys/i386/i386/swapgeneric.c,
  /sys/i386/i386/autoconf.c and /sys/kern/kern_devconf.c.

Submitted by:	wpaul
1994-12-31 17:11:59 +00:00
Jordan K. Hubbard 63c5d14d1b Miscellaneous changes from Bill Paul:
- /sys/i386/isa/if_ed.c doesn't quite know how to deal with SMC EtherEZ
  ethernet cards. The EtherEZ looks just like the Elite Ultra, except it
  has only 8K of shared memory. The only way to have it properly detected
  is to zero and test a few bytes of memory just about the first 8K region.
  If it clears properly, it's an Elite Ultra, otherwise it's an EtherEZ.

  I've also got an EtherEZ patch for netboot (Makefile, ether.c and ether.h).

- /sys/i386/isa/syscons.c wraps at the next to the last column rather than
  the last column, like it should. You don't really notice this unless you
  use certain programs that write all the way out to, say, the 80th column,
  like VMSmail. Along with a one-line fix for this are some changes to
  implement a non-blinking cursor. Put 'options "NOBLINK_CURSOR"' in your
  config file and give it a try. :)

Submitted by:	wpaul
1994-12-31 17:09:58 +00:00
Bruce Evans 19bc776351 Add more segment registers to list of registers (fake for %fs and %gs).
This might be useful for debugging applications that use a special LDT.
However, printing of all segment registers is currently broken.

Don't print "last exception: " before the FPU opcode and pc, etc.  The
opcode and pc, etc., are for the last FPU _instruction_.

Pass the saved exception status word to print_387_status() so that the
exception(s) that caused or will cause a trap can be seen.  The kernel
has supported this since 1.1 or before.  The kernel still clobbers the
tag word if a trap occurs.

Remove unused null function clear_regs().
1994-12-31 17:00:09 +00:00
Bruce Evans ccd05d4df4 Fix declaration of i386_float_info(). 1994-12-31 16:56:43 +00:00
Bruce Evans 9d1e3dc7d8 Restore our local changes which were clobbered by the previous commit.
cvs is not being used effectively for gdb.  Our old changes get clobbered
and our new changes are mixed with "vendor" changes in the same updates
so they will be difficult to untangle for the next release of gdb.  The
revision logs get spammed for each release of gdb.
1994-12-31 16:34:59 +00:00
Bruce Evans fcb54b3ee0 Hide yet another redefinition of PAGE_SIZE. Cosmetic. 1994-12-31 16:16:27 +00:00
Bruce Evans bdeaa9bbc3 Restore our (cosmetic) local changes which were clobbered by the previous
commit (do them slightly differently).
1994-12-31 16:14:13 +00:00
Jordan K. Hubbard 86dccd9394 From: Luigi Rizzo <luigi@labinfo.iet.unipi.it>
Would you please commit this two-line patch to /sys/i386/isa/b004.c
(the Transputer driver) so that it at least compiles under 2.x
Haven't tried if the driver is working properly, but a kernel with
compiled-in driver has been running for two days now with no apparent
problems.
Submitted by:	luigi
1994-12-31 12:32:59 +00:00
Andrey A. Chernov 3006712148 Reflects $HOME dir handling 1994-12-31 12:32:01 +00:00
Andrey A. Chernov 16e544e7a1 Fix problem when attached process detached
Submitted by: Gary Jennejohn
1994-12-31 12:26:50 +00:00
Andrey A. Chernov 31e98e3f62 Fix for two problems:
Calendar not cd $HOME when running by user
Calendar calls cpp with # lines allowed
1994-12-31 12:15:27 +00:00
Andrey A. Chernov eaa803797b Remove direct keypad 5 to \E[E remapping, unnecessary now 1994-12-31 11:52:50 +00:00
Andrey A. Chernov 48897b90ef Changes to allow keypad 5 produce \E[E like SCO/ANSI term does 1994-12-31 11:49:12 +00:00
Andrey A. Chernov 1af33e5a7a Changes to allow keypad 5 produce \E[E like SCO/ANSI term does 1994-12-31 11:38:39 +00:00
Andrey A. Chernov f4221a73c3 Change ${COPY} to -c, always needed here 1994-12-31 11:13:52 +00:00
Andrey A. Chernov 71d5664cdc Change ${COPY} to -c, always needed here
Remove manpage reference to BSD adduser, add pwd_mkdb reference
1994-12-31 11:12:35 +00:00
Jordan K. Hubbard 31455121d5 Fix:
>Number:         86
>Category:       misc
>Synopsis:       fixit.conf missing srcdir
>Confidential:   no
>Severity:       non-critical
>Priority:       low
>Responsible:    core (FreeBSD core team)

From John Capo.
Submitted by:	jcapo
1994-12-31 05:36:40 +00:00
Jordan K. Hubbard 669fbfeff8 Add seagate driver manpage from Serge Vakulenko (vak@cronyx.ru) .
Submitted by:	serge
1994-12-31 05:33:56 +00:00
Jordan K. Hubbard 10bfdf2bae From: "Serge V.Vakulenko" <vak@gw.cronyx.msk.su>
This is new version of Seagate ST01/02, Future Domain TMC-885, TMC-950
SCSI driver for FreeBSD.  I started from the 2.0R version and mostly
rewrote it.  New features are:

1) New probe algorithm.  Old driver read the BIOS region of the adapter
   memory and find the copyright string.  The problem was in the BIOS itself:
   it conflicted with IDE disks.  The solution was to unplug it and
   make the probe algorithm to work without it.
2) Proper timeout handling in numerous places where the driver
   polls waiting for some event.
3) Assembler flagments added in critical places, mostly for data transfer
   to of from the target.  It was possible to make it faster,
   but at the price of decreasing reliability.
4) Target-dependent delays when waiting for REQ deassert event.
   Some devices seem to be slower (CD-ROMS, some tape drives),
   and some seem to be too fast (disks).  The driver tests the REQ
   deassert timeout for each target and then uses it for polling.
5) Device flags added for SCSI parity control and sense request
   priority control.
6) Generic cleanup, after which the driver became much more readable
   (at least by me:).
7) Target data parity error logging is limited to avoid log file overflow.
8) Manual page added.

Submitted by:	serge
1994-12-31 05:31:48 +00:00
Jordan K. Hubbard 556751c1e8 Add David River's patch fix to use the passed in number of bits (-b <n>)
properly.
Submitted by:	rivers
1994-12-31 04:40:52 +00:00
Jordan K. Hubbard 3c8ea7601e Bring in the files added by Gary Jennejohn's gdb update.
Submitted by:	gj
1994-12-30 23:33:10 +00:00
Jordan K. Hubbard 01db5e69c1 Hurrah! Let the champagne flow, the olive oil barrel be opened and
the wild, slippery orgy commence!

Gary Jennejohn, too studly for his own good, has finally come through with
the new, improved gdb 4.13.  This gdb features:

o	kgdb support - if this works (and I urge folks to test it), we can
	finally purge the old and hateful version of kgdb from our source
	tree.

o	attach/detach support.  See comments in README.FreeBSD for more
	details.

o	Well, it's newer.  Our previous version was 4.11.

Comments and flames to gj, of course! :-)

Thanks, Gary.  Much appreciated.  The previous state of gdb/kgdb has been a
thorn in all of our sides for some time..
Submitted by:	gj
1994-12-30 23:27:33 +00:00
Jordan K. Hubbard 2558753d2e Tweak the man page too. 1994-12-30 22:51:33 +00:00
Jordan K. Hubbard a309172130 From: Wankle Rotary Engine <wpaul@skynet.ctr.columbia.edu>
- The -a flag now works just as it does in SunOS: '-a' is actually
  handled like a wildcard for all interfaces. 'ifconfig -a' displays
  the status of all interfaces, 'ifconfig -a netmask 0xffffff00' sets
  the netmask of all interfaces, and so forth. I don't know if many
  people really need to be able to set the netmasks of all interfaces
  at once, but the SunOS ifconfig seems to allow this, so there you
  have it.

- An 'ether_status' function has been added to display the ethernet
  address of all ethernet interfaces. Again, as in SunOS, you must
  be root in order for this to work. The ethernet address is read
  from /dev/kmem using kvm_open() and kvm_read(), much in the same
  was as it's done with netstat. If you choose to install ifconfig
  set-gid kmem then normal users will be able to see the ethernet
  address as well, though this may not be desireable. This feature
  requires a small change to the ifconfig Makefile: you need to link
  with -lkvm in order to use the kvm_*() functions.

Submitted by:	wpaul
1994-12-30 22:42:41 +00:00
Andrey A. Chernov f3392428da Add check for writeable terminal
Submitted by: mark@grondar.za (and slightly modified)
1994-12-30 16:09:31 +00:00
Andrey A. Chernov 54b77925ee Remove unneded kbdcontrol from SUBDIRS
Submitted by: roberto@blaise.ibp.fr
1994-12-30 15:44:32 +00:00
Andrey A. Chernov 80aea1ca5e Cleanup. 1994-12-30 15:40:11 +00:00
Andrey A. Chernov 99e4807ade Remove extra targets per Bruce suggestion.
Use more macros instead of hardcoded things
1994-12-30 15:38:04 +00:00
Andrey A. Chernov 7ccdf7da4c Upgrade from new bash 1994-12-30 14:39:39 +00:00
Bruce Evans 7658fd20d7 Don't strip off the last slash in the pathname "/". cp used to
stat the pathname "" in order to decide that the pathname "/" is
a directory.  This caused `cp kernel /' to fail if the kernel has
the POSIX behaviour of not allowing the pathname "" to be an alias
for ".".  It presumably also caused `cp /etc/motd /' to fail in
the unlikely event that "." is not stat'able.

Be more careful about concatenating pathnames: don't check that
the pathname fits until prefixes have been discarded (the check
was too strict).  Print the final pathname in error messages.
Terminate the target directory name properly for error messages.
Don't add a slash between components if there is already a slash.
1994-12-30 13:12:12 +00:00
Bruce Evans 43469be308 icu.s:
Move definition of `stat_imask' to clock.c.

clock.c:
Rename `rtcmask' to `stat_imask' and export it.  Rename `clkmask' to
`clk_imask' for consistency.

Only calculate TIMER_DIV(hz) once.

Merge debugging and "garbage" code to produce debugging code and format the
output better.

Make writertc() static inline and use it everywhere.  Now all accesses to
the clock registers go through rtcin() and writertc().

Move rtc initialization to cpu_initclocks().

Merge enablertclock() with cpu_initclocks() and remove enablertclock().
The extra entry point was just a leftover from 1.1.5.
1994-12-30 12:43:35 +00:00
Bruce Evans 06ea59471c spl.h:
Don't calculate imask for splstatclock() every call.

Remove declaration of nonexistent variable `high_imask'.

Sort declarations of imasks and spl's.
1994-12-30 12:42:15 +00:00