This hook can be useful, for example to run a local function to choose
different modules to load when a user has picked a different kernel
from the menu.
Reviewed by: kevans
Approved by: mav (mentor)
MFC after: 1 week
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D24115
This may be used for the local module to hook in and load any additional
modules that it wants, since it can't modify the modules table internal to
config. We may consider adding API to do so at a later time, but I suspect
it will be more complicated to use with little return.
status is captured but ignored for the purpose of loading the hook. status
will be false if *any* module failed to load, but we typically don't let
that halt the boot so there's no reason to let it halt hooks. Some vendors
or setups may have expected fails that would be actively thwarted by
checking it.
We may, at a later date, consider adding an API for letting non-config
modules check which modules have successfully (or not) loaded in case an
unexpected failure *should* halt whatever they are doing.
MFC after: 3 days
If module_blacklist isn't specified, we have an empty blacklist; effectively
the same as if module_blacklist="" were specified in loader.conf(5).
This was reported when switching to a BE that predated the module_blacklist
introduction, but the problem is valid all the same and likely to be tripped
over in other scenarios.
Reported by: bwidawsk
MFC after: 3 days
Some fixes:
- Maintain historical behavior more accurately w.r.t verbose_loading;
verbose_loading strictly prints "${module_name...}" and later "failed!"
or "ok" based on load success
- With or without verbose_loading, dump command_errbuf on load failure.
This usually happens prior to ok/failed if we're verbose_loading
Reviewed by: imp
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D17694
This is a step in the process of easing migration into the new world order
of DRM drivers. Strongly encourage users towards loading DRM modules via
rc.conf(5) instead of loader.conf(5) by failing the load from loader(8).
Users so inclined may wipe out the blacklist via module_blacklist="" in
loader.conf(5), and it is expected that these modules will eventually be
removed from the blacklist. They may still be loaded as dependencies of
other modules or explicitly via the loader prompt, but this should not be a
major problem.
Approved by: re (rgrimes)
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D16914
Earlier changes setup a config.module_path variable that was populated upon
reading of loader.conf(5) and used for restoring module_path to pristine
condition if multiple kernels are attempted. This broke the ability to
override module_path at the loader prompt in case of emergency.
Approved by: re (rgrimes)
While loader.conf(5) suggests that all values should be quoted, reality is
that this was never strictly enforced and it is used. We already make some
concession to this in number values, which aren't strictly quoted either.
The compromise here is that multi-word values must be quoted. This lets
things like `foo_load=YES` work, while denying more complex expressions on
the right hand side. This likely catches the vast majority of current usage.
A bit of a kludge is needed to accomplish this since Lua regex doesn't
support branching. I had considered splitting up expressions and generating
the right-hand side of the expressions completely in config.parse, but
deemed this too large of an overhaul to take given the current timing. This
should be re-worked shortly after the thaw.
Reported by: royger
lualoader was not respecting the 'xen_kernel' environment variable, which
hints to the interpreter that it should load a Xen kernel prior to loading
any other kernel that might be specified. If a Xen kernel is specified and
we fail to load it, we should not proceed to boot.
Reported by: royger
Tested by: royger
This includes some light rework to simplify the line parsing, as well. If
we hit a line match, we'll always either use the line and move on to the
next line, or we'll spew out malformed line errors.
We had multiple spots to output the error and set the status based on
whether we had a non-nil first capture group or failed EOL validation, but
it was always the same error. Light rework entails a small label jump to
skip error handling and elimination of 'found' local.
A couple of issues addressed:
1.) Modules with - in the name were not recognized as modules
2.) The module regex was repeated for each place a module name may appear
3.) The 'strip leading space' bits were repeated for each expression
4.) The trailing 'comment validation' stuff was repeated every expression
#4 still has some more work to be done. exec lines, for instance, don't
capture a 'value' -- there's only one capture pattern. This throws off the
'c' value that we match, so the trailing bits aren't *actually* being
validated. This isn't a new issue, though, so a future comit will address
this.
We support both of the following cases of substitution:
bar="y"
foo="${bar}"
foo="$bar"
The latter substitution syntax is, of course, not recommended- all
punctuation must be considered potential variable names, and we do not go
through the effort of searching the different combinations of, for instance,
"$x.y.z" to determine if the variable is $x, $x.y, or $x.y.z.
This is not officially documented as supported, but it has worked in
forthloader for what is most likely a long time as `evaluate` is used to
process the right hand side of the assignment.
loader.conf(5) documents loader_conf_files to mean "additional configuration
files to be processed right after the present file." However, lualoader
ignored loader_conf_files after processing /boot/defaults/loader.conf.
Rewrite these bits to process loader_conf_files after each loaded file.
This will not be executed on reload, though later work could allow for that.
It's intended/expected that later work won't generally need to happen on
every config load, just once (for, e.g., menu initialization) or just when
config is reloaded but not upon the initial load.
- No need for a 'goto' when our entire loop body is then wrapped in a
conditional.
- No need to leave commented out prints laying around
- If an expression is clearly going to be either nil or an expression that
isn't likely to be a boolean, we might as well use `or` to specify a
default value for the expression. e.g. `loader.getenv(...) or "no"`
The previous iteration of this assumed that {module}_load was set. In the
old world order of default loader.conf(5), this was probably a safe
assumption given that we had almost every module explicitly not-loaded in
it.
In the new world order, this is no longer the case, so one could delete a
_load line inadvertently while leaving a _name, _type, _flags, _before,
_after, or _error. This would have caused a confusing Lua error and borked
module loading.
This pertains exclusively to the set/restore functionality that we offer,
where any changes made by loader.conf previously will be effectively removed
upon reload of the configuration. We don't currently have a need to export
these, so don't bother.
See: comments in the hook module about intended usage, as well as the
introduced use for config.reloaded.
Use the newly introduced hook module to define a "config.reloaded" hook.
This is currently used to register core's clearKernelCache as a reload hook
to avoid a circular dependency and fix this functionality- it didn't
actually work out, and it isn't immediately obvious how it slipped into src.
Other hook types will be introduced into the core lualoader as useful hook
points are identified.
With autodetection turned on, hitting the filesystem everytime we need to
calculate choices for the kernel carousel is kind of slow. Cache once on the
first listing and reload it anytime the config is reloaded in case any of
the loader.conf(5) changes that affect this (kernel, kernels,
kernels_autodetect) have changed. This also picks up the case where we've
changed currdev and the autodetected kernels could change.
This applies to:
- exec
- [module]_before
- [module]_error
- [module]_after
Before this commit, these used loader.perform to execute them as a pure,
unsalted loader command. This means that they were not able to take
advantage of any Lua-salted loader commands, like boot and autoboot, or pure
Lua loader commands (functions attached to the 'cli' module).
They now have access to the full arsenal, just shy of being able to execute
arbitrary Lua.
Rather than hardcoding these things. This could lead to some form of loader
localization later, but the main goal at the moment is to get a clear view
of the strings we're outputting and strive to use more string.format() and
less wild concatenation all over the place.
Our module bits ended up more stable than I anticipated, so this turns out
to be no longer useful.
If things like this need to come back, we should do it in a separate 'debug'
module to serve as a collection of debugging aides. As a rule, this 'debug'
module would *not* be allowed as a requirement of any other modules in-tree.
These indices were assigned the same values as they would've been implicitly
assigned anyways.
While here, throw terminating commas after the last value of tables.
It should use the common parser, but it should not be processed like a
standard file. Rewite check_nextboot to read the file in, check whether it
should continue, then parse as needed.
This allows us to throw the recently introduced check_and_halt callback
swiftly out the window.
config.parse is now purely a parser, rather than a whole proccessor. The
standard process for loading a config file has been split out into
config.processFile.
This clears the way for having nextboot read its own config file and decide
there whether it should parse the rest of the file.
This is step 1 towards revoking config.parse of it I/O privileges. Ideally,
all reading would be done before config.parse and config.parse would just
take text and parse it rather than being charged with the entire process.
Functionally, the latter error wouldn't necessarily hurt anything. io.write
will just error out as it's not passed a valid file handle. Still, we can do
better than that.
The functionality was correct, but our style guidelines tend to request that
we shy away from using boolean operations in place of explicit comparisons
to nil.
config.parse now takes an extra callback that is invoked on the full text of
the config file. This callback dictates where we should actually try to
parse this file or not.
For nextboot, we use this to halt parsing if we see 'nextboot_enable="NO"'.
If we don't, parse it and write 'nextboot_enable="NO" ' to it. The same
caveat as with forth still applies- writing is only supported by UFS.
The latter is good, but the former is more elegant and clear about what 'x'
is. Adopt it, preferably only using the latter kind of notation where needed
as values for tables.
Graphics have a tendency to cause 80-col issues, so make an exception to our
standard indentation guidelines for these graphics. This does not hamper
readability too badly.
Two 40-column strings of spaces is trivially replaced with
string.rep(" ", 80)
luacheck pointed out an assortment of issues, ranging from non-standard
globals being created as well as unused parameters, variables, and redundant
assignments.
Using '_' as a placeholder for values unused (whether it be parameters
unused or return values unused, assuming multiple return values) feels clean
and gets the point across, so I've adopted it. It also helps flag candidates
for cleanup later in some of the lambdas I've created, giving me an easy way
to re-evaluate later if we're still not using some of these features.
