The bhyve(8) exit status indicates how the VM was terminated:
0 rebooted
1 powered off
2 halted
3 triple fault
The problem is when we have wrappers around bhyve that parses the exit
error code and gets an exit(1) for an error but interprets it as "powered off".
So to mitigate this issue and makes it less error prone for third part
applications, I have added a new exit code 4 that is "exited due to an error".
For now the bhyve(8) exit status are:
0 rebooted
1 powered off
2 halted
3 triple fault
4 exited due to an error
Reviewed by: @jhb
MFC after: 2 weeks.
Sponsored by: iXsystems Inc.
Differential Revision: https://reviews.freebsd.org/D16161
The initial work on bhyve NVMe device emulation was done by the GSoC student
Shunsuke Mie and was heavily modified in performan, functionality and
guest support by Leon Dang.
bhyve:
-s <n>,nvme,devpath,maxq=#,qsz=#,ioslots=#,sectsz=#,ser=A-Z
accepted devpath:
/dev/blockdev
/path/to/image
ram=size_in_MiB
Tested with guest OS: FreeBSD Head, Linux Fedora fc27, Ubuntu 18.04,
OpenSuse 15.0, Windows Server 2016 Datacenter.
Tested with all accepted device paths: Real nvme, zdev and also with ram.
Tested on: AMD Ryzen Threadripper 1950X 16-Core Processor and
Intel(R) Xeon(R) CPU E5-2609 v2 @ 2.50GHz.
Tests at: https://people.freebsd.org/~araujo/bhyve_nvme/nvme.txt
Submitted by: Shunsuke Mie <sux2mfgj_gmail.com>,
Leon Dang <leon_digitalmsx.com>
Reviewed by: chuck (early version), grehan
Relnotes: Yes
Sponsored by: iXsystems Inc.
Differential Revision: https://reviews.freebsd.org/D14022
allocation, I could identify that actually we use this pointer on pci_emul.c as
well as on vga.c source file.
I have reworked the logic here to make it more readable and also add a warn to
explicit show the function where the memory allocation error could happen,
also sort headers.
Also CID 1194192 was marked as "Intentional".
Obtained from: TrueOS
MFC after: 4 weeks.
Sponsored by: iXsystems Inc.
Also stdarg(3) says that each invocation of va_start() must be paired
with a corresponding invocation of va_end() in the same function. [1]
Reported by: Coverity
CID: 1194318[0] and 1194332[1]
Discussed with: jhb
MFC after: 4 weeks.
Sponsored by: iXsystems Inc.
Differential Revision: https://reviews.freebsd.org/D15548
strdup(3) allocates memory for a copy of the string, does the copy and
returns a pointer to it. If there is no sufficient memory NULL is returned
and the global errno is set to ENOMEM.
We do a sanity check to see if it was possible to allocate enough memory.
Also as we allocate memory, we need to free this memory used. Or it will
going out of scope leaks the storage it points to.
Reviewed by: rgrimes
MFC after: 3 weeks.
X-MFC: r332298
Sponsored by: iXsystems Inc.
Differential Revision: https://reviews.freebsd.org/D15550
will be returned to indicate the error, so I'm applying an assert(3) to do
a sanity check of the return value.
Reported by: Coverity CID: 1391235, 1193654 and 1193651
Reviewed by: grehan
MFC after: 4 weeks.
Sponsored by: iXsystems Inc.
Differential Revision: https://reviews.freebsd.org/D15533
a diagnostic message. So we do a sanity checking on the return value
of vq_getchain().
Spotted by: gcc49
Reviewed by: avg
MFC after: 4 weeks
Sponsored by: iXsystems Inc.
Differential Revision: https://reviews.freebsd.org/D15388
The prior code only allowed multiples of 32 for the
numbers of columns. Remove this restriction to allow
a forthcoming UEFI firmware update to allow arbitrary
x,y resolutions.
(the code for handling rows already supported non mult-32 values)
Reviewed by: Leon Dang (original author)
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D15274
This commit adds a new debug server to bhyve. Unlike the existing -g
option which provides an efficient connection to a debug server
running in the guest OS, this debug server permits inspection and
control of the guest from within the hypervisor itself without
requiring any cooperation from the guest. It is similar to the debug
server provided by qemu.
To avoid conflicting with the existing -g option, a new -G option has
been added that accepts a TCP port. An IPv4 socket is bound to this
port and listens for connections from debuggers. In addition, if the
port begins with the character 'w', the hypervisor will pause the
guest at the first instruction until a debugger attaches and
explicitly continues the guest. Note that only a single debugger can
attach to a guest at a time.
Virtual CPUs are exposed to the remote debugger as threads. General
purpose register values can be read for each virtual CPU. Other
registers cannot currently be read, and no register values can be
changed by the debugger.
The remote debugger can read guest memory but not write to guest
memory. To facilitate source-level debugging of the guest, memory
addresses from the debugger are treated as virtual addresses (rather
than physical addresses) and are resolved to a physical address using
the active virtual address translation of the current virtual CPU.
Memory reads should honor memory mapped I/O regions, though the debug
server does not attempt to honor any alignment or size constraints
when accessing MMIO.
The debug server provides limited support for controlling the guest.
The guest is suspended when a debugger is attached and resumes when a
debugger detaches. A debugger can suspend a guest by sending a Ctrl-C
request (e.g. via Ctrl-C in GDB). A debugger can also continue a
suspended guest while remaining attached. Breakpoints are not yet
supported. Single stepping is supported on Intel CPUs that support
MTRAP VM exits, but is not available on other systems.
While the current debug server has limited functionality, it should
at least be usable for basic debugging now. It is also a useful
checkpoint to serve as a base for adding additional features.
Reviewed by: grehan
Differential Revision: https://reviews.freebsd.org/D15022
from userland without the need to use sysctls, it allows the old
sysctls to continue to function, but deprecates them at
FreeBSD_version 1200060 (Relnotes for deprecate).
The command line of bhyve is maintained in a backwards compatible way.
The API of libvmmapi is maintained in a backwards compatible way.
The sysctl's are maintained in a backwards compatible way.
Added command option looks like:
bhyve -c [[cpus=]n][,sockets=n][,cores=n][,threads=n][,maxcpus=n]
The optional parts can be specified in any order, but only a single
integer invokes the backwards compatible parse. [,maxcpus=n] is
hidden by #ifdef until kernel support is added, though the api
is put in place.
bhyvectl --get-cpu-topology option added.
Reviewed by: grehan (maintainer, earlier version),
Reviewed by: bcr (manpages)
Approved by: bde (mentor), phk (mentor)
Tested by: Oleg Ginzburg <olevole@olevole.ru> (cbsd)
MFC after: 1 week
Relnotes: Y
Differential Revision: https://reviews.freebsd.org/D9930
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
No functional change intended.
When using -l option targeting file that can't be opened (ie. nmdm module
is not loaded and /dev/nmdm* is specified) bhyve tries to apply capsicum
capabilities to a file that was not opened.
Enclose that code in an if statement and only run it on correctly opened
descriptor also providing meaningful message in case of an error.
Submitted by: Pawel Biernacki <pawel.biernacki@gmail.com>
Reviewed by: grehan, emaste
Sponsoied by: Mysterious Code Ltd.
Differential Revision: D12985
Gcc noticed that the result of the bit shift is always zero. Shift so
that the ATC_CS_C67 bits end up in bits 6 & 7.
Reviewed by: grehan, tychon
Approved by: markj (mentor)
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D11775
Gcc complained that e82545_tx_thread has a return type declared but
doesn't return anything. Annotate the procedure with _Noreturn.
Reviewed by: grehan
Approved by: markj (mentor)
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D11774
pthread_join(3). The variable tid is not yet initialized in case
the authentication fails at early stage, that would lead pthread_join be
called with an uninitialized variable.
CID: 1375950
Reported by: Coverity, cem
Reviewed by: cem
MFC after: 3 weeks.
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D11150
Also add __FBSDID.
Reviewed by: grehan
This file lacks a license(!) so for this change the following declaration
applies:
To the greatest extent permitted by, but not in contravention of,
applicable law, Affirmer hereby overtly, fully, permanently, irrevocably
and unconditionally waives, abandons, and surrenders all of Affirmer's
Copyright and Related Rights and associated claims and causes of action,
whether now known or unknown (including existing as well as future claims
and causes of action).
