Some changes of my own to make screen saver configuration a little
more sane, and also make it easier to get to the keyboard/screen
setup from the options menu.
place (sysinstall.h) when packages change rev.
Change the way that the routing daemon is configured entirely, to
placate Joerg. Also auto-load gated if it's specified, while we're at it.
This fixes the kernel panic when propagating userconfig changes to
arbitrary kernels.
Remove obsoleted `#include <tcl.h>' added a few <stdio.h> where
necessary.
Fix getting scsi bus information from an -incore kernel.
Turned on SAVE_USERCONFIG by default.
SLIP/PPP devices, putting them before the others in the network device
selection menu.
2. Change "Other" to "URL" so as not to conflict with the keyboard accellerator
for the "OK" button in FTP site selection menu.
3. Detect the NULL last symbol in the name list and initialize the other
members correctly.
First, change sysinstall and the Makefile rules to not build the kernel
nlist directly into sysinstall now. Instead, spit it out as an ascii
file in /stand and parse it from sysinstall later. This solves the chicken-n-
egg problem of building sysinstall into the fsimage before BOOTMFS is built
and can have its symbols extracted. Now we generate the symbol file in
release.8.
Second, add Poul-Henning's USERCONFIG_BOOT changes. These have two
effects:
1. Userconfig is always entered, rather than only after a -c
(don't scream yet, it's not as bad as it sounds).
2. Userconfig reads a message string which can optionally be
written just past the boot blocks. This string "preloads"
the userconfig input buffer and is parsed as user input.
If the first command is not "USERCONFIG", userconfig will
treat this as an implied "quit" (which is why you don't need
to scream - you never even know you went through userconfig
and back out again if you don't specifically ask for it),
otherwise it will read and execute the following commands
until a "quit" is seen or the end is reached, in which case
the normal userconfig command prompt will then be presented.
How to create your own startup sequences, using any boot.flp image
from the next snap forward (not yet, but soon):
% dd of=/dev/rfd0 seek=1 bs=512 count=1 conv=sync <<WAKKA_WAKKA_DOO
USERCONFIG
irq ed0 10
iomem ed0 0xcc000
disable ed1
quit
WAKKA_WAKKA_DOO
Third, add an intro screen to UserConfig so that users aren't just thrown
into this strange screen if userconfig is auto-launched. The default
boot.flp startup sequence is now, in fact, this:
USERCONFIG
intro
visual
(Since visual never returns, we don't need a following "quit").
Submitted-By: phk & jkh
kernel" mechanism. This is just the foundation - more work follows
and will be committed over the next few hours.
Submitted-by: "Eric L. Hernes" <erich@lodgenet.com> & jkh
and use /dev/console.
I really think the proper test is to determine which device has been configured
to be the console (remember the RB_SERIAL flag?) and use it instead of always
trying to open /dev/ttyv0 first.
and the user inserts a floppy), read the config file to pre-define variables
for a custom installation.
[Note: I fixed one bug in LOAD_CONFIG_FILE code, but it's still not perfect.]
Some things may still display text on the 24th line, but that's because
they've always been screens designed to fit into a minimal real-estate
and have hardwired assumptions about the dimensions. They'll be a little
harder to make dynamic.
I usually test, so... :-( Guess we'll have to slide the tag forward on
these two files - Peter, could you do the honors? I've been up for the last
30 hours or so and I just *know* that any attempt on my part to do this would
probably end up deleting the entire repository somehow. :-)
option for installing distributions and/or packages to somewhere other than /,
say for a case where you're installing to an external disk on some other
machine's behalf. More miscellaneous fixes to various problems I stumbled
across while adding this stuff.
Add a few strategic screen clears.
Do a lot less wasted screen I/O in restoring screen contents that don't need
restoring.
Use tar instead of cp to back up /etc in installUpdate.
Don't panic when upgrade shell exits.
apparently look bad on some LCD screens. While I'm in there, tweak and adjust
a number of other minor interface details which have been bothering me for
awhile.
for everything _but_ the multi-user case now (it was the opposite before :-).
That means adding packages with the 2.2-960511-SNAP boot floppy is busted. Feh.
in one place, leaking memory in another).
Add a facility to invoke subsystems directly by naming them on
sysinstall's command-line when running post-install. A replacement
for pkg_manage might, for example, be `/stand/sysinstall configPackages'
Fix bogon where upgrade shell was entered with tty modes spammed.
Fix bug with release name checking in ftp_strat. Turned a bunch of
bogus exit()s into proper calls to systemShutdown().
Make "selection bar" inverse video white-on-blue on color screens to avoid
it getting muddled up with popup dialogs.
Do disk selection in a more friendly fashion (for one thing, allow a
drive to be de-selected again if you change your mind).
Add a few strategic screen-saves to prevent corruption of screen contents
(thanks, Michael Elbel!).
More asthetic adjustments to menus.
Improve both the display efficiency and usability of the label
screen - it's now possible to label quite a few disks in the label editor.
Go back to Normal menus for Media and FTP menus rather than
radio menus - the difference in behavior is confusing and sort
of detracts from the added (small) advantage of seeing what you last
picked.
1. Fix the last display bugs (I hope) by use of dialog rebuilds at stategic
points.
2. Clean up the distributions menus so that everybody (that's reasonable)
has All and Clear options for setting/clearing things en-masse.
3. Various attempts at display optimization.
4. Change the wording of the `Don't use Write!' dialogs to make them more
explicitly define when and when not to use the option.
I still have a _very very annoying_ display bug which occurs when a menu
item causes a submenu to be displayed - the screen repaints for the original
menu (which is restored upon return from the submenu) are off by about 4
characters. I've tried restoring the screen, the cursor position, you name
it - same deal. Grrrr! This commit is my first step in trying to get someone
else to help me look into this one since I'm just tearing my hair out at this
point!
1. Use new dialog menu hacks (no strings, just arrays of dialogMenuItem structs)
so that I can create composite menus with radio/checkbox/... items in them,
removing some long-standing UI bogons in various menus. This work isn't
finished yet, but will be done in two phases. This is phase one.
2. Remove all the script installation stuff. I never got time to document it,
it was arcane and it just complicated much of the code. There are better
ways of doing this if I want to do auto-driven installations later.
3. Remove much dead code and otherwise attempt to remove as much historical
grot as possible so that this code is easier to hack on. This is also
a two-stage process, phase one of which is now complete.
recent libdisk changes. (sysinstall is guilty of using `private' in
quite more places, but since this ain't in library code, it's not that
important.)
Whenever possible, better not use C++ reserved words...
Fixed DPADD again.
mk/bsd.README
Don't list the LIBXXX identifiers here. Describe them better.
mk/bsd.prog.mk
Updated the list of LIBXXX identifiers.
- recently added library libdisk.a wasn't mentioned (required for sysinstall)
- old objects kz*.o weren't mentioned
- old libraries libc_pic.a, libcom_err.a, libf2c.a, libg++.a, libgcc_pic.a,
libgmp.a, libipx.a, libkeycap.a, libss.a and libxpg4.a weren't mentioned
- old libraries libgnumalloc.a and libftp.a no longer exist
- old library libmp.a was said to not exist
- deprecated links libfl.a and libln.a weren't mentioned
1. Revamp package installer to use new dependency lists and also
pkg_add's new `read from stdin' mode to prevent a copy of the package
from hitting the disk unnecessarily.
2. More fixes for running "not as init" - don't get upset if CDROM already
mounted, do the right thing instead.
3. If running as init, assume first-time install and _don't show the
(W)rite option in the fdisk screen.
4. Many other little tweaks, some of which will have to wait for fuller testing
until I can create a boot floppy (testing certain system-destroying
features of sysinstall can be a royal pain). Expect some more commits.
This looks like it was developed offline, and is being spammed over the
top of the existing. "That's fine by me! I dont really care how you do
it, just get it in there..." said Jordan in a conversation a short while
ago...
multi part stuff centralized.
The final check is backwards or something so it always said it failed,
even it it didn't.
Fixed tcpip address check to not be stupid, 10.0.255.1 is legal.
Change root.flp from a new format CPIO archive to a tar archive.
Unless we're willing to change the main tarballs from tar format to
"newc" (or, even better, "crc") cpio format, we need to use one common
one for all and that's tar for now. Install will now grab "root floppy"
from an ftp site if that's what you've got set.
Fix even more gripes from Poul's list.
P.S. As soon as I get the distfiles copied over to freefall tomorrow
morning, those of you wishing to test minimal installs over ftp should
be able to do so by grabbing the boot floppy and nothing else. Keep
your eyes open for my announcement.
Root floppy (which actually may be able to go completely away at some point
soon!) is now loadable from ftp/nfs/dos as well as CDROM and (of course)
floppy.
Fix more problems on Poul's Gripe List.
1. Fix a few bugs in the ftp installation code and implement proper
ftp and network shutdown routines.
2. Clean up the menus a fair bit - add a FreeBSD configuration menu.
3. Eliminate the last of the "chaining" - the installation now does
the most obvious thing in the most obvious cases and doesn't present
you with more menus than you were expecting. This makes it necessary to be
a little more explicit in places, but it's still less confusing.
4. Add a few more safety nets for the user. Change a few hard-and-fast
limits to warnings (it now runs as non-root, Bruce).
5. Add descriptions for all the supported ethernet cards.
6. Make the cpio floppy extract put up a menu requesting the drive you wish
to use if you have more than one; don't just always assume drive A.
Add testftp: target
ftp.c:
add more debugging output and fix a few more problems
media_strategy:
make the ftp system actually do something resembling common sense.
it now works after a fashion, although it soon falls over for some
reason.
ftp installation method should now function. We'll know as soon as my
make release builds the floppies. I'm just committing this out of my
release tree now so that it doesn't get clobbered again.
use them yet, but it's close (we're working on the last wrinkles
in the CD install for now).
2. Complete the CDROM installation strategy code.
3. Simplify the distribtuion loading code.
4. General error message cleanup.
5. Write the /etc/fstab file now and split those routines into config.c
6. Clean up the menus a little more.
This is getting ridiculous. I may have to put the clear() back
and take the performance penalty, Poul.
Tweak the TCP/IP setup menu to look a little nicer.
Add lp0 to the list of available network devices (it was found before
but simply not described properly).
Justin can see it.
2. Attempt to fix the redisplay problems in label.c some more. Not clearing
the screen each time is certainly faster, but it's causing all sorts of
problems.
of optimizations. Add a check to make sure that root filesystems
are at least 20MB in size (this is just a thumbnail approximation,
and we can revise it later if necessary).
disks.c: clrtobot() so that deleted stuff disappears.
disks.c: offset is signed (for OnTrack diskmanager)
system.c: don't setbuf(stdout,0), it's too slow.
Add size argument to new_part, so it can come up with a good default for newfs.
Fix (possibly) a dialog botch after label.c's wizard mode.
Make vsystem even smarter abour crunched binaries (what a speedup!)
(You need to recompile crunchgen !)
partition editors (ugh). Fix an utterly bogus message (no arguments :)
in dist.c. This should all make Poul a little happier and slide in
before the next CTM update window.
with the diff/CVS hassles - this represents far too many CVS commit
messages for you folks, and trying to document each and every iteration
of the code is a hassle (and not very useful at that).
Don't notify in vsystem() - it obscures the original message.
Put some debugging code into cpio_extract() so that I can see
why it doesn't work now. :(
implementation.
2. Totally rework device registration. It's about half the size and
more powerful now.
3. Add DOS discovery.
4. Start filling in some of the strategy routines.
5. Another clean-up pass over the menus.
6. Make wizard code use Disk typedef.
If I can get the first strategy routine finished tonite, we should have a working
install (from ftp, at least) this weekend.
as per Andrey's letter. Make a few modifications for correctness.
2. Add Language menu back to first menu - it was too buried in the
Options menu.
3. Add size information to all distributions.
4. Add a compat20 distribution (we need to make one of these!! Any takers? Please?)
Submitted by: Nickolay N. Dudorov <nnd@gw.itfs.nsk.su> & jkh
syscons (and/or cons25) at all. This code looked just fine running
on an xterm, but on a console the attributes are all wrong. I
now have to sacrifice some screen real-estate to pring cheesy
`-' characters to accomplish the same thing.
broken in syscons, or at least in the cons25 termcap entry! :-( A_BOLD
won't show up on monochrome adapters (I don't think) but they'd be screwed
anyway since I don't have an attribute to use for them now at all.
