Bruce A. Mah
5cd95fe8d5
Add release note for netgraph enhancements/improvements.
...
Submitted by: archie
2000-09-15 20:52:03 +00:00
Jordan K. Hubbard
b7bbaa3ca9
Correct variable check for VAR_TRY_DHCP.
2000-09-15 08:15:14 +00:00
Bruce A. Mah
f207b58535
New release note: aac driver.
2000-09-13 16:00:54 +00:00
Mike Smith
8e847be836
Teach sysinstall about 'aac'.
2000-09-13 06:15:53 +00:00
Bruce A. Mah
fe936fcbe2
New release notes: OpenSSH->2.2.0, binutils->2.10.0, libreadline->4.1,
...
ifconfig(8) lladdr, bktr(4)->2.1.5.
2000-09-11 18:18:57 +00:00
Bruce A. Mah
413f71808b
Note MFC: killall(1) as a C program, boot98cfg(8) for i386.
2000-09-11 15:08:21 +00:00
Bruce A. Mah
153349bab0
New release notes: ipfilter->3.4.9, new kernel location, FFS snapshots.
...
Add note to Alpha relnotes (accidentally omitted) on softupdates licensing.
2000-09-10 06:55:27 +00:00
Wilko Bulte
cb9c6f9887
Overhaul of AS2[01]0[A] description.
2000-09-09 10:02:39 +00:00
Bruce A. Mah
7c2624a5fa
Note 3C556/3C556B support in the xl(4) driver and subsequent
...
MFC.
2000-09-08 22:13:53 +00:00
Bruce A. Mah
43df730912
New relnotes: SMPng, clarification to nsswitch.conf(5)
...
that hosts.conf(5) is gone, perl 5.6.0. First two items inspired by
recent commits to UPDATING.
2000-09-08 05:58:18 +00:00
Bruce A. Mah
f34a27c910
Crypto-related release notes: sshd now has X11Forwarding on by default,
...
RSAREF no longer needed in the USA, sshd now enabled by default on
new installs.
2000-09-07 21:28:01 +00:00
Bruce A. Mah
2a512567a4
Note that the asr(4) and mly(4) drivers are in -CURRENT.
...
Reviewed by: msmith, "Salyzyn, Mark" <mark_salyzyn@adaptec.com>
2000-09-07 18:47:55 +00:00
John Baldwin
281ec158d7
- Revert gratuitous reinstall -> install change in previous commit.
...
- Don't try to build modules when compiling a kernel during release.
2000-09-07 16:51:23 +00:00
Jordan K. Hubbard
c0953990e0
MFS: sync with -stable by removing the now-vestigal X_AS_PKG stuff.
2000-09-07 16:05:52 +00:00
David E. O'Brien
2440c807a3
The kernel is now known as `kernel.ko' and it and its matching modules
...
live in ``/boot/kernel/''. So tweak the release build to match previous
assumptions and expectations.
2000-09-07 05:52:43 +00:00
Bruce A. Mah
36677e00ae
Fix whitespace bogon.
2000-09-06 20:19:30 +00:00
Bruce A. Mah
8cb744f5ba
Note that the regular expression syntax supported by killall(1) changed
...
when it became a C program.
Submitted by: sheldonh
2000-09-06 20:17:33 +00:00
Bruce A. Mah
17c8ebb447
Note the addition of nsswitch support, recently merged from NetBSD.
2000-09-06 19:36:39 +00:00
Jacques Vidrine
248aee623c
Add nsswitch support. By creating an /etc/nsswitch.conf file, you can
...
configure FreeBSD so that various databases such as passwd and group can be
looked up using flat files, NIS, or Hesiod.
= Hesiod has been added to libc (see hesiod(3)).
= A library routine for parsing nsswitch.conf and invoking callback
functions as specified has been added to libc (see nsdispatch(3)).
= The following C library functions have been modified to use nsdispatch:
. getgrent, getgrnam, getgrgid
. getpwent, getpwnam, getpwuid
. getusershell
. getaddrinfo
. gethostbyname, gethostbyname2, gethostbyaddr
. getnetbyname, getnetbyaddr
. getipnodebyname, getipnodebyaddr, getnodebyname, getnodebyaddr
= host.conf has been removed from src/etc. rc.network has been modified
to warn that host.conf is no longer used at boot time. In addition, if
there is a host.conf but no nsswitch.conf, the latter is created at boot
time from the former.
Obtained from: NetBSD
2000-09-06 18:16:48 +00:00
Bruce A. Mah
1eb81f6059
Release notes reflect addition of Alteon AceNIC 1000baseT and Netgear
...
GA620T 1000baseT support to the ti(4) driver and subsequent MFC.
In hardware list, re-sort list of NICs supported by ti(4) driver.
2000-09-06 17:05:01 +00:00
Sheldon Hearn
84b8727d48
Add ftp.no.freebsd.org.
...
PR: 21068
Submitted by: Martin Eggen <martin@copyleft.no>
2000-09-06 13:16:58 +00:00
Bruce A. Mah
68c9803b7f
Note the MFC of ATA100 support into the ata(4) driver and update the
...
list of ATA controllers currently supported.
2000-09-05 21:36:50 +00:00
Wilko Bulte
ccc8460ce8
correct silly typo..
...
Submitted by: "Koster, K.J." <K.J.Koster@kpn.com>
2000-09-05 17:17:36 +00:00
Wilko Bulte
1914a854fd
Throw out a considerable number of cards that have never been tested
...
on Alpha, primarily in the storage adapter area. Things like
Soundblaster-attached CDs, WD7000 etc for example. Try to get RELNOTES
for alpha to reflect reality a bit more.
2000-09-04 20:56:43 +00:00
Jordan K. Hubbard
45b9c3d79c
enable sshd by default. This only effects *new* installs, so
...
upgraders will not receive any unpleasant surprises.
2000-09-04 15:50:15 +00:00
Wilko Bulte
d3d40e9ffb
Tincup & Rawhide need their VGA cards in a slot connected to PCI0 for the
...
BIOS emulation to work.
2000-09-03 17:34:44 +00:00
Wilko Bulte
344c9c9981
Fix wording
...
Submitted by: obrien
2000-09-02 20:30:02 +00:00
Wilko Bulte
b3f212829b
- Add AS1200/Tincup description
...
- Add a bunch of new machine codenames
- Cleanup Miata a bit
- Update AS[56]00 description
- fix typos
2000-09-02 10:19:32 +00:00
Wilko Bulte
9f25b65fb8
Document AS1200 ("Tincup") as tested successfully.
2000-09-02 10:14:05 +00:00
Bruce A. Mah
16ffe958b9
Note in release notes that: which(1) and killall(1) are now C
...
programs, finger(1) now supports finger aliases.
2000-09-01 18:40:32 +00:00
Bruce A. Mah
f3956f2d03
Reflect the MFC of: Posix.1b shared memory objects, OpenSSL 0.9.5a,
...
routed 2.22.
2000-09-01 16:39:02 +00:00
MIHIRA Sanpei Yoshiro
961f1cbb8c
set pccard insertion beep type in install floppy.
...
When we use PC-Card as install media, it is a patch
to tell with beep about whether we were able to
recognize it well.
Reviewed by: jkh, imp
Tested by: Kenji Yamada <kyamada@ISI.EDU>
2000-08-29 00:42:31 +00:00
John Baldwin
08945429b9
Revert back to the previous i-node values for the fixit floppy.
2000-08-28 23:16:14 +00:00
Murray Stokely
9cd58f8533
This allows you to script sysinstall to say "NO" to DHCP and IPv6.
...
Previously, you could only script these features if you said YES.
Oops. Accidentally commited to releng_4 first.
PR: 20334
Approved by: jkh
2000-08-28 18:18:47 +00:00
John Hay
b102f2e18e
The fixit floppy needs a few more inodes.
2000-08-28 14:25:53 +00:00
John W. De Boskey
0d4ea86b6e
Remove a stray backspace character.
...
Reviewed by: Eivind Eklund <eivind@FreeBSD.org>
2000-08-27 18:49:12 +00:00
Gregory Neil Shapiro
d1460f64f4
sendmail 8.11.0 has been merged into RELENG_4
2000-08-27 17:33:46 +00:00
Wilko Bulte
f565b957ec
Various cleanups all around. Document serial/graphics console
...
selection for AS1000[A]/800
2000-08-23 19:27:07 +00:00
Bruce A. Mah
a13b12fac1
Make the following additional entries to RELNOTES.TXT files:
...
alpha: tap driver, accept_filters, ata support for ATA100,
routed update to 2.22, truncate(1), syslogd(8) -n option, kenv(1),
periodic(8) controlled by periodic.conf, logger(1) support for
remote syslogs.
i386: tap driver, accept_filters, ata support for ATA100,
routed update to 2.22, truncate(1), syslogd(8) -n option, kenv(1),
periodic(8) controlled by periodic.conf, boot98cfg(8),
logger(1) support for remote syslogs.
PR: 20628
Submitted by: bmah@cisco.com (Bruce A. Mah)
Reviewed by: nik
2000-08-23 16:40:34 +00:00
Bill Paul
1163e44e8a
Mention the LinkSys LNE100TX v4.0/4.1 and a bunch of other cards.
...
Fix a typo.
2000-08-23 00:42:24 +00:00
Ollivier Robert
5ef80cec38
Correct the naming. The default server is ftp.fr and #1 is the same.
...
Add back ftp6.
2000-08-22 14:28:16 +00:00
Ollivier Robert
dd79ef6e45
Reflect the name changes in fr.freebsd.org.
2000-08-22 13:07:59 +00:00
Joerg Wunsch
75d0dc6c97
Mention that GDB now supports hardware watchpoints.
...
While i was at it, also corrected that the next 4.x release will be 4.2.
2000-08-22 12:39:52 +00:00
Jordan K. Hubbard
4dddeb4900
Use consistent timezone so date information can be meaningfully compared.
2000-08-22 09:43:12 +00:00
Jordan K. Hubbard
ca7b35bdbf
Remove device type field - there are no block devices left.
2000-08-22 03:14:39 +00:00
John Baldwin
9999fb1546
Touch ftp.1 and cdrom.1 when those stages are done to speed up make
...
rerelease when a release dies very late.
2000-08-21 22:42:09 +00:00
Jordan K. Hubbard
bc061f046b
Remove obsolete entry about wdc hangs
2000-08-19 18:54:37 +00:00
John Baldwin
5d971dc0d9
Add in the linux, tcl83, and tk83 ports categories.
...
PR: bin/20328
Submitted by: obrien
2000-08-16 18:44:40 +00:00
John Baldwin
984f371109
Add new 'ruby' ports category.
...
PR: conf/20629
Submitted by: asami
2000-08-16 17:44:35 +00:00
Yoshihiro Takahashi
b0976c1455
Decrease the size of mfsroot.flp for PC-98 to 1.2MB.
2000-08-16 09:30:47 +00:00
Sheldon Hearn
170cde4442
Mention the gawk-3.0.6 upgrade.
2000-08-15 18:05:05 +00:00
Gregory Neil Shapiro
88c75941e6
The rest of the changes needed to support the new version of sendmail (8.11.0).
...
Beyond changes to the build system, this includes fixing up the sample
freebsd.mc configuration for changes in defaults and syntax, removing
outdated documentation, and updating the release notes.
2000-08-12 22:39:25 +00:00
Yoshihiro Takahashi
7920b17f9a
- Make both 1.2MB and 1.44MB floppy images for PC-98.
...
- Rename BIGBOOT to FDSIZE for the floppy image size.
2000-08-12 14:21:33 +00:00
Yoshihiro Takahashi
552112cadd
- Added support for installing boot0 and boot0.5 for PC-98.
...
- Cosmetic changes.
2000-08-12 14:20:31 +00:00
Jordan K. Hubbard
3fdc3c548d
Make the selection of pccard IRQs fully selectable at installation time.
...
Submitted by: "Sean O'Connell" <sean@stat.Duke.EDU>
2000-08-12 07:48:25 +00:00
Mike Smith
e5352eec2f
Mention the 3ware controllers.
2000-08-08 18:54:57 +00:00
Mike Smith
1f1fdcea89
Mention the 3ware RAID controllers
2000-08-08 18:53:08 +00:00
Ollivier Robert
191a1c203e
- add ftp6.fr.freebsd.org
...
- correct URL for ftp4 and ftp5.
Submitted by: Benjamin Bayart <bayartb@guinness.domicile.fr> (for ftp6)
2000-08-08 14:36:24 +00:00
Jordan K. Hubbard
efbfff9480
Fix HTTP port addresses for the IPv6 case.
...
Submitted by: pho and Hajimu UMEMOTO
2000-08-03 02:51:45 +00:00
David E. O'Brien
47a1b949fb
Add all the missing US keymaps.
2000-07-31 21:05:48 +00:00
David E. O'Brien
84879232cd
Don't offer the PC98 link kit or setup on non-i386 installs.
2000-07-31 20:52:28 +00:00
Nick Hibma
7cce89994a
Support for the Panasonic / Matshita USB FDD.
...
Submitted by: SAKIYAMA Nobuo <sakichan@lares.dti.ne.jp>
PR: kern/20300
2000-07-31 12:40:26 +00:00
Neil Blakey-Milner
e7dbcdbd87
Fix the obvious make and sed syntax errors lurking from my last "fix".
2000-07-31 11:00:01 +00:00
Alexander Langer
90c2506c08
- FreeBSD supports the Alpha Platform as well
...
- There are now more than 3500 ports in the ports collection.
2000-07-31 09:49:28 +00:00
Alexander Langer
eb4f4d984c
- Update the list of backuped files during upgrade according to
...
sysinstall's source-code.
- wd(4) -> ad(4)
2000-07-31 09:45:43 +00:00
Satoshi Asami
52527e8d67
Add hebrew.
2000-07-31 00:16:28 +00:00
Jordan K. Hubbard
99f9320ef7
Fix the HTTP transfer code to correctly parse the port number if
...
specified.
Submitted by: pho
2000-07-30 22:18:53 +00:00
Eivind Eklund
8e4a14a9fa
Change the defaults for portmap, sendmail and inetd to be not running them.
...
Make sysinstall override this on install, so the effective behavioural
change for a newly installed system is null. Overall, this makes a system
with an empty /etc/rc.conf not run any network services, and makes the
FreeBSD-provided network services that are running visible in /etc/rc.conf
(instead of making people look through /etc/defaults/rc.conf to find the
things they need to disable to secure the system.)
Reviewed by: jhb
Discussed with: The usual cabal
2000-07-28 22:45:36 +00:00
David E. O'Brien
27ca7e5d20
* Add back DEVRANDOM for all arch's until we deal better with the
...
installation of random sensative packages.
* Remove the `ncr' driver in the Alpha case -- the `sym' driver works with
every known Alpha.
2000-07-28 20:17:04 +00:00
John Baldwin
94375988c6
Add in some more new features for the release notes.
...
PR: docs/20065
Submitted by: Bruce A. Mah <bmah@cisco.com>
2000-07-27 23:29:22 +00:00
John Baldwin
491a165843
Fix an annoying bogon in the form of a missing tab when generating CD-ROM
...
mount points in /etc/fstab.
Requested by: obrien
2000-07-27 00:46:29 +00:00
Wilko Bulte
1e05dc6eb0
Remove the 'going nowhere' warning as this belongs in the RELNOTES only
...
(if it does not get resolved in the first place)
2000-07-26 14:45:37 +00:00
Jordan K. Hubbard
ce144400b0
Fix a paste-o error which broke the build
...
Pointy-hat to: jhb
2000-07-26 12:19:14 +00:00
John Baldwin
dc2475c540
Take a lesson from picoBSD: symlink /bin and /sbin to /stand in the mfsroot
...
and install dhclient-script in stand/.
2000-07-26 04:28:21 +00:00
John Baldwin
e8aeec4639
Bump an upper limit test so the xterm termcap selection actually works.
2000-07-26 02:51:47 +00:00
John Baldwin
56b0238f1d
Since the XFree86 port builds and installs some extras not found in the
...
3.3.6 base distribution, some of the packing lists needed hacking so that
they would pack up everything in the right place. As a result, go ahead and
just add a directory for the packing lists. These are the i386 packing lists.
2000-07-26 01:39:22 +00:00
John Baldwin
e44bce4159
This script uses the other scripts in this directory to build XFree86
...
3.3.6 in a work directory and package it up into a set of tarballs that
can be used in a release.
2000-07-26 01:37:23 +00:00
John Baldwin
ca4c7dfbf6
This script takes the packing lists we generated earlier and generates the
...
corresponding tarball from it. It uses the packing list name to determine
the tarball name. If the tarball name ends in 'gz', it will be gzipped, if
it ends in 'bz', it will be bzip2'd.
2000-07-26 01:36:22 +00:00
John Baldwin
62f26f9acd
This script uses the XFree86 and XFree86-contrib ports to build and install
...
XFree86 3.3.6 into a scratch directory. The patch file patches the XFree86
port to not ask any questions and to actually be able to install some things
like the i810 server link kit bits. If you want XF86Setup to build, you
should have tk80 (not tk82) installed. If you want to XF86Setup_jp to build
you need to have ja-tk80 installed.
2000-07-26 01:31:47 +00:00
John Baldwin
1de9415aed
This script uses an existing set of XFree86 distribution tarballs to
...
generate a packing list for each tarball. We can later use these
packing lists to roll our own tarballs.
2000-07-26 01:27:24 +00:00
David E. O'Brien
4c2629aec8
Don't give the DEC Alpha user the chance to install the X servers that are
...
non-existant on non-i386 platforms.
2000-07-25 23:54:35 +00:00
John Baldwin
ab21e668ee
Use a much saner method of locating the release directory on an FTP server.
...
Now, if a release is specified, instead of just looking for a directory
with the same name as the release, try several possible directories (each
suffixed with the release name) relative to the base directory including
".", "releases/MACHINE", "snapshots/MACHINE", and each of those prefixed
with "pub/FreeBSD/". This will allow us to remove the evil symlinks under
pub/FreeBSD/releases/MACHINE/ to the snapshots on the ftp site.
2000-07-25 23:22:16 +00:00
John Baldwin
1596ed11ca
Grrr, build a non-crypto version of tcpdump to stick in the bin distribution.
...
Submitted by: kris
2000-07-25 22:30:09 +00:00
Wilko Bulte
0d58a2010e
sync with the RELENG_4 HARDWARE.TXT
2000-07-25 13:15:54 +00:00
Jordan K. Hubbard
b81dd6afa5
Actually make the date printing hack work.
2000-07-25 08:16:10 +00:00
Jordan K. Hubbard
3db81c0d49
Restore the screen after possibly spamming it.
...
Reported by: Brian J. McGovern <mcgovern@spoon.beta.com>
2000-07-25 07:38:22 +00:00
Jordan K. Hubbard
b5e57da1d1
Remove outdated crypto comments.
2000-07-24 18:45:25 +00:00
Jordan K. Hubbard
cf07fd263a
Terminate, with extreme prejudice, the USAResident hack which
...
does bad things to /etc/make.conf in certain situations. Also
soften the "don't install crypto from the USA!" messages since,
except for RSA (which is still noted), that's not so true anymore.
2000-07-24 18:00:16 +00:00
Marcel Moolenaar
11017a687b
Backout addition of -L switch to mtree. Using -L breaks the
...
build process in too many cases. Adding mtree to bootstrap-tools
to solve this breaks the upgrade path because mtree needs a
libc that has strtofflags and fflagstostr.
2000-07-23 16:33:00 +00:00
John Baldwin
484af50974
Oops, the moused disable option is now 6 instead of 4. Catch the menu text
...
up to this.
Submitted by: Valeriy E. Ushakov <uwe@ptc.spbu.ru>
2000-07-23 03:45:18 +00:00
Jordan K. Hubbard
f038100c39
If ${BINDIR} is not present, create it before installing to it.
2000-07-21 21:32:13 +00:00
Jordan K. Hubbard
b0b1485813
Add a terminal entry for xterm; a lot of people are using xterms
...
in the serial-installation of FreeBSD.
2000-07-21 20:45:56 +00:00
John Baldwin
b993bfc211
Add in the second half of the Slovenian FTP mirror entry.
2000-07-21 18:52:19 +00:00
Jordan K. Hubbard
a606bbf4c8
Remove a menu item that looks funky.
...
No donut for: obrien
2000-07-21 06:50:14 +00:00
Jordan K. Hubbard
085e4099e9
Add slovenian FTP server to site list.
...
Requested by: Blaz Zupan <blaz@amis.net>
2000-07-21 06:03:22 +00:00
John Baldwin
380d03438d
Fix this so it compiles by adding a missing quote.
2000-07-20 17:43:11 +00:00
John Baldwin
fff8eb5743
- Don't use quotes for the MD_ROOT_SIZE option when generating the BOOTMFS
...
kernel config file.
- Add WORLD_FLAGS and KERNEL_FLAGS so you can build world and kernel with
extra make options such as -jX to speed up release builds.
- When building kernels, allow their hints to tag along, and use this to
install hints onto the boot floppy. Since the boot floppy doesn't load
loader.4th, we have to change device.hints to strip comments and change
each line to an explicit set command.
2000-07-20 03:07:29 +00:00
John Baldwin
b31edf0c1b
- Clarify some of the text in sysinstall in regards to the cryto bits.
...
- Note that we are up to about 3600 ports now rather than about 3000 ports.
Submitted by: kris
2000-07-20 01:52:07 +00:00
David E. O'Brien
de5615c10a
Add ftp.freebsd.org Snapshots to the list of servers.
2000-07-19 23:59:01 +00:00
Ben Smithurst
fb6c7713b8
Mark cdcontrol's "cdid" command as [MERGED].
2000-07-19 16:05:37 +00:00
Ben Smithurst
5523e1ab86
From the PR:
...
1. Correct FTP site for 4.0-stable snapshots and delete sentence
fragment immediately following.
[ not applicable to HEAD ]
2. Add FDDI section to table of contents (see #5 below) and add
one line of whitespace.
3. In userland section, document csh->tcsh, more->less, and
colorized ls.
4. In Ethernet section, do:
s/gigabit ethernet/Gigabit Ethernet/
s/fast ethernet/Fast Ethernet/
s/ethernet/Ethernet/
5. Pull DEC DEFPA/DEFEA *FDDI* cards out of the *Ethernet* section
and into their own second-level section.
6. Add missing period in section header in ATM section.
7. Tweak upgrading sectio with some new text, not sure if this is
much better though.
8. Add a blurb about the -stable mailing list.
[ changed to -current list in HEAD ]
PR: 20015
Submitted by: Bruce A. Mah <bmah@cisco.com>
2000-07-19 00:05:59 +00:00
Wilko Bulte
5d3d180a97
document serial console habits of AS2100[a]
2000-07-18 17:50:16 +00:00
Ben Smithurst
37cc56f575
Remove <center> tags from with <title> section.
...
PR: 20002
Submitted by: James Johnson <bonk1138@msn.com>
Approved by: patrick (from freebsd-small mailing list)
2000-07-18 15:20:55 +00:00
Neil Blakey-Milner
42c4c88ae9
Add an empty crunch.inc with instructions that you can use it to adjust
...
the building of the crunched binary.
I'll add examples when I add the post-include mechanism, since the
crunch.mk environment stomps on the pre-included crunch.inc's variables
at the moment.
2000-07-18 13:49:17 +00:00
Neil Blakey-Milner
cb42083e46
Make a separate build directory in which to put all the generated
...
objects, to simplify working with PicoBSD.
Add the ability to put make instructions in crunch.inc to pass to the
build process.
Now explicitly make the objects in our own object tree, since we want to
build the objects with our own defines, and allow this to occur in a
common object tree for all PicoBSD builds, if required. This is
controlled by the COMM_OBJ variable, for those who don't want this -
setting it to /usr/obj again will just pick up the objects from your
last make buildworld, as before.
2000-07-18 13:43:38 +00:00
Neil Blakey-Milner
1b9d3e55e0
Update PICOBSD-C kernel configuration to the new world order, grabbing
...
hints simply from GENERIC.hints.
Added a bunch of comments about usb devices, new network cards, and
IPv6.
2000-07-18 13:25:51 +00:00
Neil Blakey-Milner
ec082028ef
Fix the one 'obj'-related breakage, and quieten the build. Also change
...
symlinks from '/sbin' to 'sbin', so following the links make sense when
not on the disk itself.
2000-07-18 12:17:54 +00:00
Neil Blakey-Milner
d295906767
First part of PicoBSD makeover, adding basic 'obj' facilities, allowing
...
for read-only src tree.
While I'm there:
1) Use kgzip, not kzip, since kzip certainly doesn't make bootable
kernels anymore. loader still isn't built separately, let alone without
forth support. This needs to be fixed.
2) Expand the mount/vnconfig examples to be the defacto way of making
sure the filesystems are mounted, unmounted, or not configured. This
needs more work.
3) quieten the build substantially, so errors are more prominent
4) Start of '-j' ability. Current style isn't quite in the correct
dependency format for this, but obvious mistakes (changing directories
in main shell) are fixed.
Approved by: grog, dwhite, luigi (no objections to me doing a makeover)
2000-07-18 12:04:33 +00:00
David E. O'Brien
7090abf525
Allow the Fix-it functionality to detect that we are on a serial console,
...
and DTRT rather than start the fixit shell on a non-existant vty.
PR: 19837
Submitted by: Doug Ambrisko <ambrisko@whistle.com>
Approved by: JKH
2000-07-18 09:14:06 +00:00
Jordan K. Hubbard
4b3d3c6d79
Add descriptive start/stop time information to make release. Now
...
you can just ``grep >>> release.log'' and get all the highlights.
2000-07-17 04:50:28 +00:00
Wilko Bulte
64ac9827f2
Document Ethernet card reqs for SRM boot. Note that 8255x (fxp)
...
does not currently work correctly on alpha.
2000-07-16 11:38:01 +00:00
Andrey A. Chernov
c5dfaf05b1
Add -L to mtree to preserve old functionality exact
2000-07-16 08:58:02 +00:00
Andrey A. Chernov
8b873d926b
Add -L to mtree.
...
Not shure ever it needed for MFS, but just to keep old behaviour exact, can be
removed later
2000-07-16 08:44:40 +00:00
Andrey A. Chernov
06eaff03b7
Forget to add -L to one mtree call
2000-07-16 08:20:54 +00:00
Andrey A. Chernov
590694fb28
Add -L to mtree calls since default changed back
2000-07-16 08:02:48 +00:00
David E. O'Brien
489fa7954a
Add FreeBSD Id to make this easier to track.
2000-07-16 06:33:13 +00:00
David E. O'Brien
b9cee99a1e
Squeeze the BOOTMFS kernel image some more. The Alpha kernel was simply
...
over flowing its britches. So remove all ppbus bits except those for PLIP
(untested), and all USB bits as SRM does not know what USB is. Also remove
/dev/random as I don't think we need it just for whacking bits onto a disk.
Approved by: JKH
2000-07-16 06:32:28 +00:00
Ben Smithurst
a34cabc03c
Mention Joe Karthauser's addition of the "cdid" command to cdcontrol(1).
2000-07-15 13:08:23 +00:00
John Baldwin
d191a99c2e
- Add in some sanity checking. If NOPORTS is set but NODOC is not set,
...
print an error message and die immediately rather than an hour later.
2000-07-14 18:03:32 +00:00
John Baldwin
fa6b9ae389
- Note that a few entries have been merged over to -stable.
...
- Add a note about having USB support out of the box.
2000-07-14 17:27:52 +00:00
John Baldwin
6581bd0370
Add ftp4.tw.FreeBSD.org.
...
Submitted by: nik
2000-07-14 10:39:29 +00:00
Hajimu UMEMOTO
2931df8a40
IPv6 support.
...
IPv6 configuration is only done by rtsol. Does someone really
need manual configuration? :-)
You can specify IPv6 DNS server as well.
We have only one server ftp7.jp.freebsd.org that speaks IPv6
in this time. ftp7.jp speaks IPv4 as well and also listed as
Japan #7 .
Approved by: jkh
2000-07-14 08:33:10 +00:00
John Baldwin
fbf67537b4
Ugh. Back out local changes that crept in with my last commit. :(
2000-07-14 08:09:50 +00:00
John Baldwin
cac2be43a7
MFS: (yes, from -stable) Note that current.FreeBSD.org is a 5.0 snap server
...
now, and replace the releng3 3.0 snap entry with releng4.
2000-07-14 07:59:44 +00:00
John Baldwin
c90d14a014
- Note that several features have been merged to 4.x.
...
- Add a note about supporting USB out of the box during installs and
beyond.
- Add a note about the changes to the i386 bootstrap to work around the
1024 cylinder problem. Note that boot0 is now 2 sectors long.
Reminded by: kkenn
2000-07-14 05:47:08 +00:00
Ben Smithurst
c033c5d054
* Mention 4.x as well as 3.x
...
* 3.4-stable -> 3.5-stable
* 4.0-current -> 5.0-current
2000-07-13 19:08:06 +00:00
Wilko Bulte
ce55adab19
Document non-support by SRM for Symbios895 on PC164
...
Submitted by: Christian Weisgerber <naddy@mips.inka.de>
2000-07-13 18:12:47 +00:00
John Baldwin
fcb7c05133
- Support MBR boot loaders that are larger than one sector size.
...
- Axe the 1024 cylinder checks as they are no longer relevant.
2000-07-12 18:08:27 +00:00
Wilko Bulte
96bdb85ebd
Add some info on SCSI for PC164.
...
Submitted by: naddy@unix-ag.uni-kl.de
2000-07-08 19:49:47 +00:00
Poul-Henning Kamp
5de7f65fc9
We don't do blockdevices any more.
...
XXX: should use /dev/MAKEDEV
2000-07-08 07:46:01 +00:00
Bill Paul
95674596b9
Add support for the National Semiconductor DP83815 fast ethernet
...
controller chip. This chip is currently being used on the NetGear
FA312-TX adapter, which I guess is a replacement for the FA310-TX
(PNIC-based).
I added support for this chip by modifying the sis driver since
the SiS 900 and the NS DP83815 have almost the same programming
interface (the RX filter programming and PHY access methods are
different, but the general configuration, DMA scheme and register
layout are identical).
I would have had this done a lot sooner, but getting the damn MAC
address out of the EEPROM proved to be more complicated than expected.
2000-07-06 06:02:04 +00:00
Jordan K. Hubbard
632116832b
Replace phk's commit with code from my local tree which I happen
...
to like better (it's commented and easier to read).
2000-07-05 07:15:57 +00:00
Poul-Henning Kamp
c638a74daa
Ignore all md disks, installing on them would be particularly pointless.
...
Its not fatal to find hardware we don't know.
2000-07-04 13:46:43 +00:00
Roger Hardiman
85ae82d6f6
remove rc and login.conf files prior to extraction of the new
...
rc and login.conf files from the /etc directory on the floppy.
This prevents the overwrite yes/no prompt from occuring in gzip.
(some PicoBSD disks use gzip and some use minigzip, so the gzip -f flag (force)
is not an option. minigzip has a different meaning for the -f flag.}
2000-07-03 22:31:08 +00:00
Wilko Bulte
ebd0e335d0
- remove <please comment> lines
...
- add note on single CPU use on SMP boxes
- add note on kld for isp f/w
- corrected some typos
2000-07-03 21:14:00 +00:00
Ollivier Robert
4f437f951e
Add ftp4.fr.freebsd.org (aka altair.worldonline.fr) and ftp5.fr.freebsd.org
...
(aka ns1.bsdfr.org)
Strong MFC 4.1 candidate.
2000-07-02 14:25:26 +00:00
John Baldwin
c27edf93b0
- Build modules with world so that modules are back in the bin dist.
...
- Small cleanups to kernel installs.
- Don't install kernel.config and loader.config on the boot floppy since
they haven't been used in quite some time.
2000-07-01 21:48:05 +00:00
Roger Hardiman
7bae8dfb17
Add .image.list to the list of temporary files which can be deleted
2000-07-01 13:51:22 +00:00
Roger Hardiman
3092789a18
Add a missing 'fi' from an if statement
2000-07-01 12:04:15 +00:00
Roger Hardiman
5bbd55b415
Add 'bridge' so we can clean up the bridge files too
2000-07-01 04:40:01 +00:00
Yoshihiro Takahashi
7ec62217f0
- Removed machine dependent directory and command from
...
src/release/{boot,fixit}_crunch.conf.
- Added machine specific fixit_crunch.conf for PC/AT and PC-98 to
src/release/$MACHINE.
- Use config file in src/release/$MACHINE if exist. If it does not exist,
use in src/release.
2000-06-29 13:34:54 +00:00
Brian Somers
12079633a3
Add options NETGRAPH_ETHER
2000-06-28 09:33:59 +00:00
Mark Murray
3ec3f887b0
Tiny manual correction; add mention of Kerberos 5.
2000-06-25 10:48:40 +00:00
Alexander Langer
16cca1b2bc
Fix doc: RELENG_4 is -stable now.
...
PR: 19474
Submitted by: Bruce A. Mah <bmah@cisco.com>
2000-06-23 17:49:54 +00:00
Yoshihiro Takahashi
20ffc587ec
Set BASE=5.0
2000-06-23 12:22:08 +00:00
Wilko Bulte
45fbc0c3d6
update UP1000/Symbios SCSI info
2000-06-22 20:09:01 +00:00
Jordan K. Hubbard
816c1916cd
Make sure SOFTUPDATES doesn't wind up on boot floppy and bloat it
...
up.
2000-06-22 05:55:42 +00:00
Wilko Bulte
70ccb0b9db
OpenVMS labeled disks also seem to give the installer fits.
...
Warning to be removed when alpha/17642 is fixed.
2000-06-21 19:52:58 +00:00
Wilko Bulte
8a8617470d
Document boot support for UP1000 and Adaptec 294x. Ditto for Symbios 875
...
Submitted by: Andrew Gallatin
2000-06-21 19:42:10 +00:00
Wilko Bulte
86e7756c4f
Clarify (I hope..) what a hose is. One gets used to DEC (nee, CPQ) speak
...
all too easily.
Submitted by: Alec Wolman
2000-06-17 20:04:03 +00:00
Wilko Bulte
109db96a95
Remove references to PCMCIA ethernet cards/laptops
2000-06-15 19:19:59 +00:00
Wilko Bulte
da660b48d7
update UP1000 memory intf. details
2000-06-15 17:52:41 +00:00
Wilko Bulte
5390f76ba0
Document support for Alpha Processor Inc UP1000
...
Reviewed by: Andrew Gallatin <gallatin@cs.duke.edu>
2000-06-14 20:20:51 +00:00
Wilko Bulte
7c0bc50d70
Document that alpha install CDs are now bootable. No need to muck
...
around with floppies. Also document (for lack of a more appropriate place/file)
the problems the installer has when other disks are present with a BSD
disk label on them. Please remove this warning when the problem is fixed.
PR: alpha/17642
2000-06-14 18:26:12 +00:00
Peter Wemm
447b0b51f7
Hopefully wave the unbreak-release magic wand at dokern.sh. Use GENERIC's
...
hints strings with BOOTMFS.
2000-06-14 17:53:38 +00:00
Mike Smith
dda725c98c
Mention a bug in the Mylex driver's geometry handling.
2000-06-14 04:13:01 +00:00
John W. De Boskey
80585f3426
Add 'tools' to the list of tarballs to be extracted when 'all' is
...
specified as the distribution.
PR: 18927
Submitted by: Stephen J. Roznowski <sjr@home.net>
2000-06-13 03:05:56 +00:00
Jeroen Ruigrok van der Werven
bd0b79bca7
Reformat and update sound section a bit. Still need to add more
...
soundcards.
2000-06-11 21:53:38 +00:00
Jeroen Ruigrok van der Werven
9cbdd68fbc
Try and get this list a bit more consistent in style.
...
Also, clarify a comment with proper comma placement.
Also tried to get the supported soundcard section more fleshed out. This
needs more work.
2000-06-11 13:51:29 +00:00
Jeroen Ruigrok van der Werven
5bf3f7dc2a
Add Adico and Accton NICs to the list.
...
Move NDC a bit lower so that it is alphabetical.
Inspired by PR: 18735
Submitted by: Adoal Xu <adoal@iname.com>
2000-06-11 12:04:08 +00:00
Mike Smith
53ad332522
Update hardware and release-note blurb about AMI and Mylex RAID
...
controllers. Add extra verbiage to try to clarify some of the more
frequently asked questions.
2000-06-10 19:41:34 +00:00
Jeroen Ruigrok van der Werven
33a41cc438
Detail some more 3Com NICs which we support with ep nowadays.
...
Submitted by: alex
2000-06-10 14:03:22 +00:00
Jeroen Ruigrok van der Werven
877bed4000
Actually detail which ATA controllers we support.
2000-06-10 13:41:52 +00:00
Kris Kennaway
94e0a9634e
Add blurbs about OpenSSL, OPIE and OpenSSH updates.
2000-06-09 08:19:44 +00:00
Wilko Bulte
4a879e6dd6
[NoName]: provide ftp pointer to OEM guide instead of having people email
...
me for it.
Note no support for VESA VGA on alpha.
Submitted by: Peter van Dijk <petervd@vuurwerk.nl>
2000-06-07 17:47:57 +00:00
Wilko Bulte
2ac1994e85
[Miata]: document SRM upgrade requirement when experiencing SRM
...
'scancode' errors after halting FreeBSD.
2000-06-06 19:32:11 +00:00
Wilko Bulte
4c859e8ae9
Correct info on AS2[01]00
...
Submitted by: Andrew Gallatin
2000-06-05 17:48:40 +00:00
Yoshihiro Takahashi
a40915d750
- Remove obsolete PC-card boot.flp hack. It was for making both PC-card
...
boot.flp and plain boot.flp.
- Clean up crunchgen related routine.
- Add PC-98 support.
TODO:
o Documentation
o Fix some messages for PC-98
o Decrease the size of fixit.flp to 1.2MB
o I18N (See: http://www.jp.FreeBSD.org/BootAsia/index.html )
No response from jkh
2000-06-05 13:17:23 +00:00
Brian Somers
3142868451
Specify a trigger address of 0.0.0.0 here so that we can sucessfully
...
negotiate with broken ppp implementations that won't supply an IP
number unless we suggest 0.0.0.0
Noted by: Andrew Parry <andrew.parry@db.com>
2000-06-05 10:59:43 +00:00
Josef Karthauser
3ad254b3de
Disable colour support in ls when building the fixit floppy, and make
...
a note of it in the release Makefile.
2000-06-05 02:25:55 +00:00
Wilko Bulte
234376e62c
First shot at documenting DemiSable, Sable, Lynx & Rawhide. Owners/users
...
of these machines please comment!
2000-06-04 18:33:25 +00:00
Jordan K. Hubbard
ce51a9fcf9
Add a new release variable, AUTO_KEYBOARD_DETECT. If you set it to
...
1, the -P flag is used on the boot floppies. If not, don't. The new
default is to not use it.
2000-06-04 04:41:41 +00:00
John W. De Boskey
b334e16698
Remove less from fixit.flp until the space issues are resolved.
...
Approved by: jkh
2000-06-01 23:35:15 +00:00
Jordan K. Hubbard
50ee7e6c72
Make the ports readmes and foreign docs more optional.
...
Submitted by: Ben Smithurst <ben@scientia.demon.co.uk>
2000-06-01 02:43:55 +00:00
Jordan K. Hubbard
91bb0c05fe
Update the australian NTP server entry.
...
Submitted by: Peter Matthews <peter@netwise.com.au>
2000-05-31 21:40:50 +00:00
John W. De Boskey
ca7d5d8c6d
With the removal of more, update the fixit floppy to contain
...
less (and symlink more to less).
Approved by: jkh
2000-05-31 15:26:03 +00:00
Luigi Rizzo
1bcc7e80bf
Move mfs-related files to a different subtree
2000-05-31 12:27:38 +00:00
Luigi Rizzo
f09a623ad9
Move mfs-related files to a new location
2000-05-31 12:25:39 +00:00
Mike Smith
07b1028579
Finish the /dev/rXXX removal job. With the libdisk fixes, this should
...
actually work again.
2000-05-31 00:57:48 +00:00
David E. O'Brien
13c6acf19d
Add the 'Z' key to the slice editor. Hitting it toggles the units the
...
sizes are displayed in.
Ok'ed by: murray
2000-05-26 00:38:20 +00:00
Mike Smith
6af0a0de78
Remove all of the block devices, correct major numbers to point to the
...
corresponding character devices. This is (currently) untested, but
should be correct.
2000-05-25 02:48:15 +00:00
Mike Smith
f8883ef3e1
Teach sysinstall about 'twe' disks. Note that this is currently
...
untested, and with the current state of flux surrounding the death
of bdevs other things here may need to change.
2000-05-25 02:28:50 +00:00
Joerg Wunsch
d166185f0d
Minor nit: this tar(1) replacement still used /dev/rst0 as its default
...
device.
2000-05-19 16:02:54 +00:00
Wilko Bulte
a7919b459d
Parallel ports are supported in the 5.x stream, not (yet?) in 4-stable
2000-05-17 20:23:03 +00:00
David E. O'Brien
9ee6ec34ef
Add an option to select the Fix-it tty. The current behavior is utterly
...
*useless* on serial consoled machines.
2000-05-16 22:05:32 +00:00
Wilko Bulte
595e3b035e
Parallel ports now work on Alpha.
2000-05-16 17:43:30 +00:00
Garrett Wollman
44f56af160
Add a note about exclusion support in mtree(8).
2000-05-16 17:13:59 +00:00
John Baldwin
9f8b8491c9
Add support for USB to sysinstall. This includes running usbd and
...
setting 'usbd_enable' in rc.conf during nwe installs if USB is detected.
Also, since usbd already handles USB mice automatically, note that the
mouse setup section in sysinstall only applies to non-USB mice.
2000-05-12 03:01:17 +00:00
John Baldwin
fead5c443b
Add USB devices to /dev on the install floppy.
...
Add usbd.conf to /etc on the install floppy.
2000-05-12 02:58:59 +00:00
John Baldwin
88ecacfeac
Add usbd and usbdevs to the install floppy in /stand.
2000-05-12 02:57:56 +00:00
Murray Stokely
0f32c069d9
Fixed small bug introduced in my last commit.
...
Approved by: jkh
2000-05-11 23:43:12 +00:00
Wilko Bulte
be5ff4439f
Claim support / explain white-box Alphas.
...
Obtained from: drew
2000-05-11 18:56:45 +00:00
John Baldwin
065aa0a04f
Actually, overriding DISTFILES at all is just a bad idea, so remove the
...
variable all together.
PR: misc/14104
Submitted by: Don Croyle <croyle@gelemna.ft-wayne.in.us>
2000-05-09 21:21:42 +00:00
Wilko Bulte
1f2c1783b5
Add reference to new name DIGITAL Server 330x for AlphaServer 800
2000-05-09 20:30:04 +00:00
John Baldwin
f6ede19c6d
Add a DOCDISTFILES variable to point to a directory containing the
...
distfiles to build the docproj port during release. Prior to this, the
distfiles were copied froom ${DISTFILES}. However, if like me, you needed
to store the distfiles in some directory other than /usr/ports/distfiles,
for example /usr/docdistfiles, then when you overrode ${DISTFILES} it broke
the release build when it tried to build docproj port in the chroot'd
release area. To preserve backwards compatibility, DOCDISTFILES defaults
to the value of DISTFILES.
Ok'd by: jkh
2000-05-08 22:21:17 +00:00
Kris Kennaway
080f16d410
Update device names
2000-05-07 09:26:49 +00:00
Jonathan Lemon
e003b0836e
Add blurb about kqueue to the release notes.
2000-05-06 02:33:44 +00:00
Wilko Bulte
2ae2d6ba88
Added PWS as abbreviated name for Miata
...
Submitted by: naddy@mips.inka.de
2000-05-03 21:02:29 +00:00
Wilko Bulte
5ec3fef95c
Add Samsung 164BX to non-SRM mainboards
2000-04-28 19:18:52 +00:00
Wilko Bulte
3ac18dd767
Remove PC164UX from 'might work/might have SRM'. Add warning for
...
non-SRM for PC164UX and XL/XLT DEC machines
Submitted by: <naddy@mips.rhein-neckar.de>
2000-04-27 20:19:48 +00:00
Joseph Koshy
01f31528b0
Correct typo in description string: CANNOT' ->
CAN'.
...
PR: docs/18177
Submitted by: MIHIRA Yoshiro <sanpei@sanpei.org>
2000-04-26 05:21:54 +00:00
Doug White
9547f4e793
Remove mistakenly added {o}init. The build system adds it automatically.
2000-04-25 19:03:31 +00:00
Doug White
223b633217
Commit PicoBSD mega-patch:
...
. Bring PicoBSD up to date with -CURRENT reality.
. Make PicoBSD smart and not spam /dev/vn0 and /mnt. Now it uses the first
unused vn device and creates a temporary mountpoint in /tmp.
. Miscellaneous build cleanups and optimizations.
Unfortunately the bridge, isp, and router floppies are too big and need
the axe treatment. The install floppy needs updating to -CURRENT. Dial and
net build and (appear to) run OK. I will be adressing these in the
near future (unless someone beats me to it :-) ).
PR: misc/17737
Submitted by: Omachonu Ogali <oogali@intranova.net>
2000-04-25 19:00:08 +00:00
Garrett Wollman
553654a570
Note the presence of POSIX.1b Shared Memory Objects.
...
There's got to be a better way to handle cross-architecture
kernel changes.
2000-04-22 15:36:56 +00:00
Jordan K. Hubbard
e0477e7f07
make release builds a bit more error-resistant
2000-04-22 09:00:51 +00:00
Paul Saab
f336d4cd95
Mention the support for PXE in the release notes.
2000-04-20 06:42:39 +00:00
Mitsuru IWASAKI
15558ea043
Create mfsfd/etc/defaults/ first before copying etc/defaults/pccard.conf.
2000-04-17 05:13:27 +00:00
Mitsuru IWASAKI
e8bbfc060c
Fix the location of pccard.conf,
...
etc/pccard.conf.sample -> etc/defaults/pccard.conf.
Submitted by: Makoto MATSUSHITA <matusita@jp.freebsd.org>
2000-04-17 03:09:05 +00:00
Robert Watson
27322174cd
Add mention of extended attributes in release notes.
...
Suggested by: kkenn
2000-04-16 20:06:11 +00:00
Wilko Bulte
2c339a6dea
Add web pointers to Multia FAQs
2000-04-14 10:29:03 +00:00
Wilko Bulte
8acc98e2f1
Update Multia section with floppy boot problems & workaround.
2000-04-13 18:17:59 +00:00
Wilko Bulte
35e02801dd
update Monet information
2000-04-12 20:21:56 +00:00
Murray Stokely
443b94ac1b
Installing via an HTTP proxy should not attempt to resolve the
...
hostname of the FTP server; that is the proxy's job. This temporarily
deletes the nameserver variable before calling mediaSetFTP.
PR: 17371
Approved by: jkh
2000-04-10 19:39:01 +00:00
Murray Stokely
c79f6ff977
More error checking and idiot-proofing for the user editor.
...
PR: 14318
Approved by: jkh
2000-04-08 03:08:12 +00:00
Murray Stokely
471d7061ad
PR: 17559
...
Approved by: jkh
You can't enable 'emulate 3 button' option for moused in sysinstall.
This adds a menu option to set moused_flags and the help text explains
that entering "-3" will enable this feature.
2000-04-08 03:04:32 +00:00
Wilko Bulte
23d434bead
Update DS10 description, add info on DS10L "Slate"
2000-04-06 18:10:45 +00:00
Satoshi Asami
3f17d264cd
Convert "RELENG_ver_RELEASE" to "RELEASE_ver" and use it to check out
...
the ports and doc trees. There is no change if we are not building a
release (i.e., we are not using a tag of the form RELENG_ver_RELEASE
--e.g., a RELENG_ver tag used to build a snapshot).
This should allow the ports and doc freezes during the release cycles
to be somewhat shorter, as commits to those (non-branched) trees can
resume as soon as the tags are laid down.
Reviewed by: nik
Approved by: jkh
2000-04-06 10:00:20 +00:00
Murray Stokely
f092a22bbd
Fixed minor annoyance with sysinstall being redundant / braindead in
...
the network -> interfaces menu.
Approved by: jkh
2000-04-06 01:23:21 +00:00
Wilko Bulte
583fdf9862
Add note on SCSI floppy on DEC3000 series
2000-04-03 19:32:22 +00:00
Wilko Bulte
daaf7aae15
Update status for sound on AS200 and Miata. It works..
2000-03-31 21:01:17 +00:00
Bill Fumerola
26b0377cc1
Refresh the aout ldconfig info so things like compat22 when installed can
...
be detected by netscape and such.
PR: bin/17659
Submitted by: Murray Stokelay <murray@cdrom.com>
Approved by: jkh
jkh made updates that conflict with the submitters patch, so I updated
accordingly, any mistakes are mine, not the submitters.
2000-03-31 01:03:41 +00:00
Wilko Bulte
980cf4ca92
Added description of TurboLaser (AlphaServer 8x00) that is now
...
supported thanks to Matt Jacob.
Reviewed by: Matt Jacob
2000-03-30 18:09:40 +00:00
Jordan K. Hubbard
260efb1efd
Search for the proper hints file in an ELF world.
2000-03-30 08:18:19 +00:00
Kris Kennaway
57f57fda64
Gut the release notes now that we have a clean slate again.
...
The supported hardware still looks to be lagging in the alpha file.
People, please try and keep these in better sync this time!
2000-03-25 07:09:48 +00:00
John Baldwin
d3d93ffd5f
Add #includes for sysctlbyname() to quiet a warning.
2000-03-25 04:23:08 +00:00
John Baldwin
76b501da94
Update sysinstall to use struct uc_device instead of struct isa_device
...
for generating /boot/kernel.conf. Since this structure is shared, move
its definition out to a header file, just as struct isa_device was defined
in a header file. This fixes the sysinstall breakage in -current.
2000-03-24 22:24:09 +00:00
Jordan K. Hubbard
1158a8cd3f
Adapt to the crypto distribution.
2000-03-21 19:13:31 +00:00
Luigi Rizzo
cc89db0c68
Fix bogus reporting of interface names, the field returned
...
in sdl_data is not 0-terminated
2000-03-21 12:09:23 +00:00
Nick Hibma
8a3de5db15
Add entry for the Microtech USB to SCSI cable.
2000-03-20 20:33:09 +00:00
Nick Hibma
a3cab5ab29
Add entry for Y-E Data floppy drive.
2000-03-20 20:03:52 +00:00
Nick Hibma
f14b24709e
Add an entry on the Y-E Data floppy drive
2000-03-20 19:55:08 +00:00
Jordan K. Hubbard
1d34c9e917
Sigh, it would have been nice but I just can't make the rsaref
...
hack work until we figure out some better way of handling package
interaction.
2000-03-18 20:14:58 +00:00
Jordan K. Hubbard
54dd58b383
We still need a hack for rsaref package; add it. This doesn't
...
affect CDs since they don't contain the rsaref package anyway.
2000-03-18 08:46:23 +00:00
Jordan K. Hubbard
82b13696f8
Sigh, when the DIST_LOCAL thing was added, it unfortunately wasn't added
...
completely. Take out another gratuitous warning which is omitted when
All is selected and local dist does not exist.
2000-03-18 08:40:39 +00:00
Jordan K. Hubbard
553cdb6fbd
Update to match current reality (not that anyone reads these anyway :)
2000-03-18 08:06:16 +00:00
Jordan K. Hubbard
cce91055e5
Make the "can't find an rsafoo package" messages more informative.
2000-03-18 07:20:50 +00:00
Jordan K. Hubbard
85f5012abb
Update release notes for 4.0 reality
...
PR: 17446
Submitted by: trev@sentry.org
2000-03-18 06:40:45 +00:00
Chris Piazza
16a92d4304
Update the australian ntp server, the old one is no longer
...
available.
PR: 17448
Submitted by: Chris Knight <chris@aims.com.au>
2000-03-18 02:53:41 +00:00
Patrick S. Gardella
99d780c74a
Remove "conflicts" from kernel config files for picobsd.
...
PR: 17383
Submitted by: Kelly Yancey <kbyanc@posi.net>
2000-03-16 02:45:42 +00:00
Jordan K. Hubbard
f21f1ea486
5.0 versions
2000-03-15 09:01:06 +00:00
Jordan K. Hubbard
871b7d1c7f
Add USA_RESIDENT to release make variables; can't hurt.
...
Submitted by: Tatsumi Hosokawa <hosokawa@itc.keio.ac.jp>
2000-03-12 19:19:31 +00:00
Jordan K. Hubbard
c87413f73b
Remove PkgInteractive hack - it won't work like this.
2000-03-12 03:57:26 +00:00
Martin Cracauer
de55b0bbee
Note FPU exceptions default change
2000-03-11 18:31:21 +00:00
Jordan K. Hubbard
e03f42bcc6
Do the right thing with USA_RESIDENT
2000-03-10 20:34:22 +00:00
Jordan K. Hubbard
dad50e2ed3
s/chose/choose/ in all the relevant places.
...
Noticed by: John Reynolds <jjreynold@home.com>
2000-03-10 19:53:53 +00:00
Tatsumi Hosokawa
b92c03699e
Added notes about:
...
(1) ed and ep PC-card drivers.
(2) sn driver and Megahertz X-Jack Ethernet
(3) Melco Airconnect under wi driver
2000-03-10 18:59:03 +00:00
Mike Smith
35dcdb0d72
Remove any mention of PCI support relating to userconfig.
...
Remove the comment about Mylex RAID controllers, as this has been fixed.
Approved by: jkh (partly)
2000-03-09 01:29:42 +00:00
Jonathan Lemon
f593bed1b5
Add Compaq Arrays
2000-03-08 18:14:19 +00:00
Jordan K. Hubbard
68a69aba61
Fix inexplicable crypto->des reversion.
2000-03-08 14:54:19 +00:00
Jordan K. Hubbard
976e0e0dd0
Whoops - really make the "fix" I did to the dmenuToggleVariable logic
...
work.
2000-03-08 14:20:26 +00:00