Warner Losh
683bb97c9f
When copying data, use memcpy instead of bcopy. It matches the
...
arguments better.
Also, set the need to use the workaround flag before we actually need
to use it, rather than after.
2012-08-29 04:41:25 +00:00
Warner Losh
062223cd29
Make AT91_MCI_ALLOW_OVERCLOCK a real option. Rename old use 30MHz to
...
this new option. Only try to use > 25MHz when our best frequency is <
15MHz and overclocking is enabled. Fix minor style chaff.
2012-08-28 17:27:46 +00:00
Warner Losh
d7f8f1facd
Clip the upper end to 31MHz for slow clock speeds. On faster
...
machines, we wind up with a 66MHz clock, which is too fast.
2012-08-28 14:19:10 +00:00
Warner Losh
f589a026d5
Move to using a flag instead of checking the CPU type each
...
transaction for the MCI1 rev 2.x write workarounds.
2012-08-28 03:46:31 +00:00
Warner Losh
c35e1c5bbc
Style: Move these routines to be before the forward declared functions
...
as is the normal practice.
2012-08-28 03:27:48 +00:00
Warner Losh
0f30f5d36b
Bring in the multi-block patches for mci. These required extensive
...
restructuring of the driver. I've tried to preserve the other silicon
workarounds that we've added over the years, but haven't had a chance
to extensively test on other hardware. On my AT91RM9200 with 30MHz/1
wire/64 block transfers, I've been able to go from ~.66MB/s to
2.25MB/s in the simple tests I performed, almost a 3.5x improvement.
This cuts the boot time almost in half when everything else goes
right (timed from rtc message to login: prompt).
PR: 155214
Submitted by: Ian Lapore
2012-08-28 01:28:52 +00:00
Tim Kientzle
0be65db279
Correctly fetch the MAC address.
...
Break down the bytes directly into the softc;
the intermediate buffer isn't needed here.
Break down the bytes in the correct order.
2012-08-27 04:43:30 +00:00
Warner Losh
bb6e4fd030
Add hint and sysctl support for 4 wire mode.
...
PR: 155241
Submitted by: Ian Lapore
2012-08-27 04:30:53 +00:00
Warner Losh
f535f4234a
Minor style(9) nit.
2012-08-27 04:08:43 +00:00
Warner Losh
b8e36ef7e0
Don't puprosely overclock the SD bus to 30MHz, make the user
...
explicltly enable that. The driver chose to use 60MHz / 2 (30MHz)
most of the time rather than 60MHz / 4 (15MHz) based on the Linux
driver of the time. This pushes the spec a little in order to not
suffer the penalty of running at 15MHz. However, when other bus
masters are active in the system, and the user tries 4-wire mode, the
internal bus arbitration would fail with data loss as a result.
# Comments from PR were reworked to reflect my historical perspective
PR: 155214 (partial)
Submitted by: Ian Lepore
2012-08-27 04:03:49 +00:00
Oleksandr Tymoshenko
b9fa17aeba
Add ARM11 support for elf trampoline
2012-08-26 02:34:03 +00:00
Oleksandr Tymoshenko
8f2a36c073
Add support for ARM11 cpufunc
...
Obtained from: NetBSD (partially)
2012-08-26 02:23:21 +00:00
Glen Barber
67944c4572
Grammar fix: s/NIC's/NICs/
...
MFC after: 3 days
2012-08-26 01:21:02 +00:00
Oleksandr Tymoshenko
7ff5220e81
Call set_pcpu for ARMv6 architecture too
2012-08-26 00:53:00 +00:00
Oleksandr Tymoshenko
62b4972abb
Merge fix for hang on ARM11 from NetBSD
2012-08-26 00:46:57 +00:00
Oleksandr Tymoshenko
e1f04cd024
Piggyback MIPS changes and add ARM syscons support for devices with
...
framebuffer
While here - sort #if defined() order alphabetically
2012-08-25 23:59:31 +00:00
Oleksandr Tymoshenko
5b88bb19d6
Style cleanup
2012-08-25 21:13:00 +00:00
Oleksandr Tymoshenko
46ad39d5a6
ARM11 might have more then 32 interrupts, e.g. BCM2835: 72 interrupts
2012-08-25 20:13:19 +00:00
Oleksandr Tymoshenko
bda493d611
Add clrex, strex , ldrex, strex and variants
...
Submitted by: Alexander Rybalko
2012-08-25 20:01:31 +00:00
Warner Losh
6e31adaf33
Fetch the chip select in the bridge driver, like all the other spi
...
bridges do.
2012-08-23 22:38:37 +00:00
Warner Losh
fe49e25285
Use proper resource type when freeing.
...
Submitted by: Ian Lapore (indirectly in a larger patch)
2012-08-23 21:31:52 +00:00
Oleksandr Tymoshenko
8634a69af0
Do not change "cachable" attribute for DMA memory allocated with
...
BUS_DMA_COHERENT attribute
The minimum unit for changing "cachable" attribute is page, so call
to pmap_change_attr effectively disable cache for all pages that newly
allocated DMA memory region spans on. The problem is that general-purpose
memory could reside on these pages too and disabling cache might affect
performance. Moreover ldrex/strex operators raise Data Abort exception
when accessing memory on page with "cachable" attribute off.
BUS_DMA_COHERENT does nto require memory to be coherent. It just suggests
to do best effort for reducing synchronization overhead.
2012-08-22 22:48:50 +00:00
Tim Kientzle
cddf6d2a33
After r239366, fix the ti_edma3.c driver to use the
...
exact name as used in the FDT.
2012-08-22 05:14:59 +00:00
Hans Petter Selasky
94d6bc8895
Make some at91_pcm_xxx() functions NULL safe.
2012-08-21 19:55:24 +00:00
Hiroki Sato
8bfdf49b97
- Calculate the I2C baud rate to keep them <100 kHz under different TCLK
...
frequencies. The maximum freqency is 100 kHz according to the datasheet.
- Add child device probing support based on the device tree. It now tries to
find i2c-address property in the tree and attach the device with given slave
address to iicbus.
2012-08-21 17:49:20 +00:00
Hiroki Sato
e664505cb9
Add mvts(4) driver for internal thermal sensor found on 88F6282 and 88F6283.
...
The temperature value will be exported via sysctl like this:
dev.mvts.0.temperature: 52.1C
2012-08-18 12:37:07 +00:00
Hiroki Sato
8f2853bf65
Sort IDs.
2012-08-18 12:20:51 +00:00
Hiroki Sato
b65df1c2c6
Fix build when DEBUG is defined.
2012-08-18 12:08:04 +00:00
Hiroki Sato
959bd21bec
- MV_DEV_88F6282 has 256KB 4-way L2 cache.
...
- Sort IDs in win_cpu_can_remap() and remove MV_DEV_MV78100 because it is
included in MV_DEV_DISCOVERY.
- Add MV_DEV_MV78XXX to xor_max_eng().
2012-08-18 11:40:55 +00:00
Hiroki Sato
d542454787
Fix a bug that could fail to initialize GPIO pins specified in "gpios" because
...
"gpio-controller" property at the controller node was always ignored.
2012-08-18 11:33:21 +00:00
Andrew Turner
71ea858b0e
Remove machine from the LN2410SBC config, it is set by std.s3c2410
2012-08-18 05:52:17 +00:00
Andrew Turner
19a0f7f9cb
Set machine correctly on ARM. This allows universe to use the correct world
...
when building each kernel.
Reviewed by: imp
2012-08-18 05:48:19 +00:00
Rui Paulo
8c09f7b626
The GPIO drivers were initialising their mutexes with type of
...
MTX_NETWORK_LOCK. This is wrong since these mutexes have nothing to do
with networking.
2012-08-17 04:44:57 +00:00
Warner Losh
06832193b8
Preliminary Embest ATEB9200 support.
2012-08-16 05:03:59 +00:00
Warner Losh
406be9ffb1
Hmmm, somehow this file was completely deleted, rather than just
...
having the bogus lines being removed.
2012-08-16 04:53:30 +00:00
Warner Losh
bc41a42d6b
Remove unused hints.
2012-08-16 04:49:23 +00:00
Oleksandr Tymoshenko
cf0df2b399
Unbreak build for the rest of AT91 platforms
2012-08-15 18:33:58 +00:00
Jakub Wojciech Klama
9b9bddf7c8
Switch lpc initarm() to use struct arm_boot_params and therefore fix
...
EA3250 kernel build.
Approved by: gonzo
2012-08-15 18:18:29 +00:00
Oleksandr Tymoshenko
b208396ea3
Unbreak ATMEL kernel build
2012-08-15 08:34:31 +00:00
Oleksandr Tymoshenko
d3b496875a
Specify architecture for assembler
2012-08-15 07:00:34 +00:00
Oleksandr Tymoshenko
e53470fee3
Merging of projects/armv6, part 10
...
- Support for Texas Instruments SoCs:
- AM335x
- OMAP4
- Kernel configs, DTS for Beaglebone and Pandaboard
Submitted by: Ben Gray, Damjan Marion
2012-08-15 06:31:32 +00:00
Oleksandr Tymoshenko
9dfe4a1fa4
Merging of projects/armv6, part 9
...
Very basic support for Nvidia Tegra2: timer, interrupts, UART.
Submitted by: Damjan Marion <dmarion@freebsd.org>
2012-08-15 06:06:43 +00:00
Oleksandr Tymoshenko
7a8988194d
Merging of projects/armv6, intermission
...
Add configs missed in previous commits:
- ARMADA XP
- Embedded Artists EA3250
2012-08-15 05:55:16 +00:00
Oleksandr Tymoshenko
8dee0fd04c
Merging of projects/armv6, part 8
...
r235162:
Initial LPC32x0 support. Includes DTS file for Embedded Artists EA3250
board.
Peripherals currently supported:
- Serial ports
- Interrupt controller
- Timers
- Ethernet
- USB host
- Framebuffer (in conjunction with SSD1289 LCD controller)
- RTC
- SPI
- GPIO
Submitted by: Jakub Wojciech Klama <jceel@freebsd.org>
2012-08-15 05:37:10 +00:00
Oleksandr Tymoshenko
16694521fe
Merging of projects/armv6, part 7
...
Add Marvell ARMADA XP support
Obtained from: Marvell, Semihalf
2012-08-15 05:15:49 +00:00
Oleksandr Tymoshenko
cf1a573f04
Merging projects/armv6, part 1
...
Cummulative patch of changes that are not vendor-specific:
- ARMv6 and ARMv7 architecture support
- ARM SMP support
- VFP/Neon support
- ARM Generic Interrupt Controller driver
- Simplification of startup code for all platforms
2012-08-15 03:03:03 +00:00
Andrew Turner
d2a3296d1a
Move the decoding of the swi instruction to the syscall function. With the
...
ARM EABI the syscall value will be moved to a register to ease adding thumb
support. When this happens decoding of the instruction will no longer be
required.
2012-08-11 05:58:56 +00:00
Warner Losh
56c265f2f9
Correct the PLLA setting functions and centralize.
2012-08-11 05:45:19 +00:00
Warner Losh
bcc1a5425a
Update comments about setting PLLA and refernce the tables in the
...
datasheet that express the limits.
2012-08-11 05:12:46 +00:00
Warner Losh
19b89339dc
Don't use C++ comments.
2012-08-11 05:03:30 +00:00