we were not able to change c_fmt without breaking these utilities. Since
ache fixed all known issues 8 years ago, now we make ko_KR more usable.
Better late than never...
queue was drained. It will never fire for a directly dispatched packet.
You will most likely never want to use this for any ordinary netisr usage
and you will never blame netisr in case you try to use it and it does
not work as expected.
Reviewed by: rwatson
in /etc/termcap:
VT100 spec indicates that passthrough printing can be enabled
by sending ESC[5i and disabled by sending ESC[4i These entries
should be listed as po and pf in /etc/termcap, but are absent.
See http://www.vt100.net/docs/vt102-ug/chapter5.html#S5.5.2.23
PR: conf/71549
Submitted by: Andrew Webster <andrew@pubnix.net>
MFC after: 1 week
Although the PR contains also the definitions of the Wyse 60, they
are not copied into it since there are already definition for them
in the termcap file since 1997.
Also, the PR didn't use the :tc=xxx: feature, so I've imploded them.
PR: conf/81882
Submitted by: Meister des Chaos <meister@netz00.com>
MFC after: 1 week
The termcap database does not have an entry for rxvt-unicode.
This means that programs that need an entry such as vi fail
to work when connecting via ssh using this terminal emulator.
The added data is not the same as the PR submitted by Richard, it
uses the :tc=xxx: option to inherit everything from rxvt-mono.
PR: conf/117323
Submitted by: Richard Bradshaw <richard.bradshaw@blueyonder.co.uk>
MFC after: 1 week
There is a minor typo in the cons25l7 (':' instead of '|') entry
in src/etc/termcap.small that causes syscons to complain about
bogus characters in /etc/termcap.db.
PR: conf/132777
Submitted by: Nikos Ntarmos <ntarmos@cs.uoi.gr>
MFC after: 1 week
and ja_JP.SJIS locale
The iswprint() function does not return non-zero if used for
some wide-character that it code was 0x824f-0x8258 on ja_JP.SJIS
and 0xa3b0-0xa3b9 on ja_JP.eucJP locale. But those are right
Japanese wide-character code.
PR: conf/124511
Submitted by: Michihiro NAKAJIMA <ggcueroad@gmail.com>
MFC after: 1 week
addition: danish syscons keymap with accents
There are two danish keymap files shipping with FreeBSD:
danish.iso.kbd and danish.cp865.kbd. None of these support
accents by use of dead keys, which isn't crucial to Danes but
often used. This is a new keymap, danish.iso.acc.kbd, that's
based on danish.iso.kbd with the accent part taken from
german.iso.acc.kbd.
pl_PL.dvorak keymap for syscons.
Polish dvorak keymap by Robert Sebastian Gerus (17:05 01-07-2006
CEST) <arachnist@gmail.com>. Based on pl_PL.ISO-8859-2 and
us.dvorak keymaps.
British English Dvorak keymap for syscons.
Attached is a Dvorak keymap for British English, with a
pound-sterling symbol on on Shift-3 and some other characters
in different places to the US Dvorak keymap. I've based the
layout on the X.org GB keymap, Dvorak variant.
PR: conf/72978, kern/99692, conf/117257
Submitted by: Kim Norgaard <jasen@jasen.dk>, Robert Sebastian Gerus <arachnist@gmail.com>, "Benjamin A'Lee" <bma@subvert.org.uk>
MFC after: 1 week
French translations for keyboards keymaps descriptions with
some corrections on existing translations in the
/usr/share/syscons/keymaps/INDEX.keymaps
PR: conf/71767
Submitted by: Henri Michelon <hmichelon@e-cml.org>
MFC after: 1 week
Without this patch /usr/share/locale/hr_HR.ISO8859-2/LC_COLLATE
is a link to the ../la_LN.ISO8859-2/LC_COLLATE. It means
that there is no support for Croatian locale.
PR: conf/120113
Submitted by: Simun Mikecin <numisemis@yahoo.com>
MFC after: 1 week
Catalan language is not only spoken in Spain (ca_ES), but also
in Andorra, France and Italy. In Andorra it is the official
language.
(see http://en.wikipedia.org/wiki/Catalan_language#Geographic_distribution)
Add a bunch of symlinks to between ca_ES and ca_AD, ca_FR and ca_IT.
PR: conf/92541
Submitted by: <rmh@io.debian.net>
MFC after: 1 week
With the de_CH (swiss german) locale, numbers should look like this:
numbers: 1'234.45
monetary values: Fr. 1'234.45
Previously, the thousands separator was missing for numbers, and
"." for monetary values, and "," was incorrectly used as decimal
point.
PR: conf/75502
Submitted by: Benjamin Lutz <benlutz@datacomm.ch>
MFC after: 1 week
probe. The current device order is unchanged. This commit just adds the
infrastructure and ABI changes so that it is easier to merge later changes
into 8.x.
- Driver attachments now have an associated pass level. Attachments are
not allowed to probe or attach to drivers until the system-wide pass level
is >= the attachment's pass level. By default driver attachments use the
"last" pass level (BUS_PASS_DEFAULT). Driver's that wish to probe during
an earlier pass use EARLY_DRIVER_MODULE() instead of DRIVER_MODULE() which
accepts the pass level as an additional parameter.
- A new method BUS_NEW_PASS has been added to the bus interface. This
method is invoked when the system-wide pass level is changed to kick off
a rescan of the device tree so that drivers that have just been made
"eligible" can probe and attach.
- The bus_generic_new_pass() function provides a default implementation of
BUS_NEW_PASS(). It first allows drivers that were just made eligible for
this pass to identify new child devices. Then it propogates the rescan to
child devices that already have an attached driver by invoking their
BUS_NEW_PASS() method. It also reprobes devices without a driver.
- BUS_PROBE_NOMATCH() is only invoked for devices that do not have
an attached driver after being scanned during the final pass.
- The bus_set_pass() function is used during boot to raise the pass level.
Currently it is only called once during root_bus_configure() to raise
the pass level to BUS_PASS_DEFAULT. This has the effect of probing all
devices in a single pass identical to previous behavior.
Reviewed by: imp
Approved by: re (kib)
From the submitter:
DIN 5008 (German norm for text processing) defines the old date
format (%d.%m.%Y) to be obsolete and to be used only, if unambigous.
In international communications the new format (%Y-%m-%d) is now
required and FreeBSD should respect this.
References:
- DIN 5008
- EN 28 601
- ISO 8601
Thanks to Oliver Lietz for bringing this to my attention.
PR: conf/72076
Submitted by: Peter Wullinger <some-mail-drop@gmx.net>
MFC after: 1 week
version field sent via gif(4)+if_bridge(4). The EtherIP
implementation found on FreeBSD 6.1, 6.2, 6.3, 7.0, 7.1, and 7.2 had
an interoperability issue because it sent the incorrect EtherIP
packets and discarded the correct ones.
This change introduces the following two flags to gif(4):
accept_rev_ethip_ver: accepts both correct EtherIP packets and ones
with reversed version field, if enabled. If disabled, the gif
accepts the correct packets only. This flag is enabled by
default.
send_rev_ethip_ver: sends EtherIP packets with reversed version field
intentionally, if enabled. If disabled, the gif sends the correct
packets only. This flag is disabled by default.
These flags are stored in struct gif_softc and can be set by
ifconfig(8) on per-interface basis.
Note that this is an incompatible change of EtherIP with the older
FreeBSD releases. If you need to interoperate older FreeBSD boxes and
new versions after this commit, setting "send_rev_ethip_ver" is
needed.
Reviewed by: thompsa and rwatson
Spotted by: Shunsuke SHINOMIYA
PR: kern/125003
MFC after: 2 weeks
the number of days between backups. All it says is frequency, with no
units given. It likely should say "the interval in days between backups"
instead, but not today.
In Portuguese, the names of the days of the week are not capitalized.
Also there is always a dash before "feira" in the names of the days.
For example: "segunda-feira" and not "segunda feira" (which has a
completely different meaning).
x_fmt is not correct either. The date separator should not be a dot
but a slash. Example: 31/12/2005 if far more used in Portugal than
31.12.2005.
References:
- a Portuguese online dictionary http://priberam.pt/dlpo/dlpo.aspx
- http://answers.com/days_of_the_week (there are translations to
various languages, including Portuguese, at the bottom of the
page)
- http://en.wikipedia.org/wiki/Week-day_names (there are translations
to various languages, including Portuguese, at the bottom of the
page)
- a Portuguese style guide
http://www.publico.clix.pt/nos/livro_estilo/16d-palavras.html
("datas" section)
PR: conf/58595
Submitted by: Chris Stenton <jacs@gnome.co.uk>
MFC after: 1 week
Each list describes a logical memory object that is backed by one or more
physical address ranges. To minimize locking, the sglist objects
themselves are immutable once they are shared.
These objects may be used in the future to facilitate I/O requests using
physically-addressed buffers. For the immediate future I plan to use them
to implement a new type of VM object and pager.
Reviewed by: jeff, scottl
MFC after: 1 month
We will look at renaming stuff for 9.0, but it's far from certain that we
will do it this way.
- Sort sysctl's alphabetically. I'll add a bunch of new sysctl's once
ariff's next mega-patch goes in, and having everything sorted makes my
job easier.
