from whoever has dequeued the item from the queue. Generally they have
no interest in the result, and even if it is called by the queuer, it
should still pretend that it was queued. The queuer should be assuming
that the call was queued and giving them the false confidence that they
are getting status leads to hard to find bugs.
Make it a void and remove all the code that tried to return status through it.
These functions are intended to be used to drop a lock and then reacquire
it when doing an sleep such as msleep(9). Both functions accept a
'struct lock_object *' as their first parameter. The 'lc_unlock' function
returns an integer that is then passed as the second paramter to the
subsequent 'lc_lock' function. This can be used to communicate state.
For example, sx locks and rwlocks use this to indicate if the lock was
share/read locked vs exclusive/write locked.
Currently, spin mutexes and lockmgr locks do not provide working lc_lock
and lc_unlock functions.
excessive interrupt clock timer reset, screwing interrupt generation
for already active channels. Track moving DMA pointer and call buffer
interrupt on each blocksize boundary.
PR: kern/109791
MFC after: 3 days
GETATTRs being generated - one from lookup()/namei() and the other
from nfs_open() (for cto consistency). This change eliminates the
GETATTR in nfs_open() if an otw GETATTR was done from the namei()
path. Instead of extending the vop interface, we timestamp each attr
load, and use this to detect whether a GETATTR was done from namei()
for this syscall. Introduces a thread-local variable that counts the
syscalls made by the thread and uses <pid, tid, thread syscalls> as
the attrload timestamp. Thanks to jhb@ and peter@ for a discussion on
thread state that could be used as the timestamp with minimal overhead.
* To use this option with a UDP socket, it must be bound to a local port,
and INADDR_ANY, to disallow possible collisions with existing udp inpcbs
bound to the same port on other interfaces at send time.
* If the socket is bound to INADDR_ANY, specifying IP_SENDSRCADDR with
INADDR_ANY will be rejected as it is ambiguous.
* If the socket is bound to an address other than INADDR_ANY, specifying
IP_SENDSRCADDR with INADDR_ANY will be disallowed by in_pcbbind_setup().
Reviewed by: silence on -net
Tested with: src/tools/regression/netinet/ipbroadcast
MFC after: 4 days
a thread is an idle thread, just see if it has the IDLETD
flag set. That flag will probably move to the pflags word
as it's permenent and never chenges for the life of the
system so it doesn't need locking.
- Remove some excessive parentheses around shift operators.
- Use macro instead of magic number where it is applicable.
- Change lower-case hexdecimals to upper cases to match wpaul's style.
- Revert some unnecessary line wraps and changes from the previous commit.
Pointed out by: bde
in the field. In one situation, one end of the TCP connection sends
a back-to-back RST packet, with delayed ack, the last_ack_sent variable
has not been update yet. When tcp_insecure_rst is turned off, the code
treats the RST as invalid because last_ack_sent instead of rcv_nxt is
compared against th_seq. Apparently there is some kind of firewall that
sits in between the two ends and that RST packet is the only RST
packet received. With short lived HTTP connections, the symptom is
a large accumulation of connections over a short period of time .
The +/-(1) factor is to take care of implementations out there that
generate RST packets with these types of sequence numbers. This
behavior has also been observed in live environments.
Reviewed by: silby, Mike Karels
MFC after: 1 week
sun4v nexus(4) in turn is based on):
o Change nexus(4) to manage the resources of its children so the
respective device drivers don't need to figure them out of OFW
themselves.
o Change nexus(4) to provide the ofw_bus KOBJ interface instead of
using IVARs for supplying the OFW node and the subset of standard
properties of its children. Together with the previous change this
also allows to fully take advantage of newbus in that drivers like
fhc(4), which attach on multiple parent busses, no longer require
different bus front-ends as obtaining the OFW node and properties
as well as resource allocation works the same for all supported
busses. As such this change also is part 4/4 of allowing creator(4)
to work in USIII-based machines as it allows this driver to attach
on both nexus(4) and upa(4). On the other hand removing these IVARs
breaks API compatibility with the powerpc nexus(4) but which isn't
that bad as a) sparc64 currently doesn't share any device driver
hanging off of nexus(4) with powerpc and b) they were no longer
compatible regarding OFW-related extensions at the pci(4) level
since quite some time.
o Provide bus_get_dma_tag methods in nexus(4) and its children in
order to handle DMA tags in a hierarchical way and get rid of the
sparc64_root_dma_tag kludge. Together with the previous two items
this changes also allows to completely get rid of the nexus(4)
IVAR interface. It also includes:
- pushing the constraints previously specified by the nexus_dmatag
down into the DMA tags of psycho(4) and sbus(4) as it's their
IOMMUs which induce these restrictions (and nothing at the
nexus(4) or anything that would warrant specifying them there),
- fixing some obviously wrong constraints of the psycho(4) and
sbus(4) DMA tags, which happened to not actually be used with
the sparc64_root_dma_tag kludge in place and therefore didn't
cause problems so far,
- replacing magic constants for constraints with macros as far
as it is obvious as to where they come from.
This doesn't include taking advantage of the newbus way to get
the parent DMA tags implemented by this change in order to divorce
the IOTSBs of the PCI and SBus IOMMUs or for implementing the
workaround for the DMA sync bug in Sabre (and Tomatillo) bridges,
yet, though.
o Get rid of the notion that nexus(4) (mostly) reflects an UPA bus
by replacing ofw_upa.h and with ofw_nexus.h (which was repo-copied
from ofw_upa.h) and renaming its content, which actually applies to
all of Fireplane/Safari, JBus and UPA (in the host bus case), as
appropriate.
o Just use M_DEVBUF instead of a separate M_NEXUS malloc type for
allocating the device info for the children of nexus(4). This is
done in order to not need to export M_NEXUS when deriving drivers
for subordinate busses from the nexus(4) class.
o Use the DEFINE_CLASS_0() macro to declare the nexus(4) driver so
we can derive subclasses from it.
o Const'ify the nexus_excl_name and nexus_excl_type arrays as well
as add 'associations' and 'rsc', which are pseudo-devices without
resources and therefore of no real interest for nexus(4), to the
former.
o Let the nexus(4) device memory rman manage the entire 64-bit address
space instead of just the UPA_MEMSTART to UPA_MEMEND subregion as
Fireplane/Safari- and JBus-based machines use multiple ranges,
which can't be as easily divided as in the case of UPA (limiting
the address space only served for sanity checking anyway).
o Use M_WAITOK instead of M_NOWAIT when allocating the device info
for children of nexus(4) in order to give one less opportunity
for adding devices to nexus(4) to fail.
o While adapting the drivers affected by the above nexus(4) changes,
change them to take advantage of rman_get_rid() instead of caching
the RIDs assigned to allocated resources, now that the RIDs of
resources are correctly set.
o In iommu(4) and nexus(4) replace hard-coded functions names, which
actually became outdated in several places, in panic strings and
status massages with __func__. [1]
o Use driver_filter_t in prototypes where appropriate.
o Add my copyright to creator(4), fhc(4), nexus(4), psycho(4) and
sbus(4) as I changed considerable amounts of these drivers as well
as added a bunch of new features, workarounds for silicon bugs etc.
o Fix some white space nits.
Due to lack of access to Exx00 hardware, these changes, i.e. central(4)
and fhc(4), couldn't be runtime tested on such a machine. Exx00 are
currently reported to panic before trying to attach nexus(4) anyway
though.
PR: 76052 [1]
Approved by: re (kensmith)
- Properly note when a read lock is released.
- Always note when we contest on a read lock.
- Only note success of obtaining read locks for the first reader to match
the behavior of sx(9).
Reviewed by: kmacy
station exiting power save mode prepend them to the driver's
send q instead of appending them. This insures the packets
are not misordered wrt any packets already q'd for the station.
This corrects a problem noticed when using a VoIP phone talking
to an ath card in ap mode; the misordered packets caused noise.
Submitted by: "J.R. Oldroyd" <jr@opal.com>
MFC after: 2 weeks
<sys/extattr.h> to <ufs/ufs/extattr.h>. Move description
of extended attributes in UFS from man9/extattr.9 to
man5/fs.5.
Note that restore will not compile until <sys/extattr.h>
and <ufs/ufs/extattr.h> have been updated.
Suggested by: Robert Watson
never correct as CAM has no real understanding of it, and will just immediately
retry the command. This leads to undesirable cycling of the camisr as well as
a high possibility for the command to exhaust its retries before the driver
can get around to servicing it.
The better fix, as demonstrated here, is to freeze the simq and mark the
command as needing to be tried. Then when driver can service the command,
the simq gets unfrozen. This is correct, and documented here to help reduce
the mystery. However, it also points out a shortcoming in CAM error handling
that makes writing drivers harder.
Submitted by: Erich Chen
for processing frames from the power save queue when operating
in ap mode. This is especially noticeable for realtime data going
to devices like voip phones.
Submitted by: "J.R. Oldroyd" <jr@opal.com>
MFC after: 2 weeks
For example, during a buildworld more than half of the calls do not
generate an IPI because the only TLB entry invalidated is on the calling
processor. This revision pushes down the acquisition and release of
smp_ipi_mtx into smp_tlb_shootdown() and smp_targeted_tlb_shootdown() and
instead uses sched_pin() and sched_unpin() in pmap_invalidate_*() so that
thread migration doesn't lead to a missed TLB invalidation.
Reviewed by: jhb
MFC after: 3 weeks
EC occasionally times out and provides bogus values (3000C). This change
prevents those systems from prematurely shutting down while we work on the
underlying problem. Also, bump the sanity value to 0...200C from 0...150C.
paper over catching an error as the case was already handled, albeit
in a somewhat surprising way (the caller received zero'd data)
Submitted by: sephe
MFC after: 2 weeks
by any code in the tree[1] and are close enough for common values
that this change is a noop
[1] ath uses one macro to calculate a value that is not used
Submitted by: sephe
MFC after: 1 week
- Remove also "MP SAFE" after prior "MPSAFE" pass. (suggested by bde)
- Remove extra blank lines in some cases.
- Add extra blank lines in some cases.
- Remove no-op comments consisting solely of the function name, the word
"syscall", or the system call name.
- Add punctuation.
- Re-wrap some comments.
to problems when the geli device is used with file system or as a swap.
Hopefully will prevent problems like kern/98742 in the future.
MFC after: 1 week
RTC state, then it may clobber the RTC index register, so the index
register must be restored before using it to restore control registers
in rtc_restore().
The following problems remain:
- rtc_restore() is only called if pmtimer is configured. Buggy
suspend/resumes are more likely to clobber the index register than
a control register, so pmtimer is more needed than it used to be.
- pmtimer doesn't exist for amd64.
- Restoring of the RTC state may race with rtcintr(). If an RTC
interrupt is handled before the state is restored, then rtcin(RTC_INTR)
in rtcintr() may read from the wrong register, so rtcintr() may spin
forever. This may be mitigated by the most common state clobbering
being to turn off RTC interrupts.
system calls now enter without Giant held, and then in some cases, acquire
Giant explicitly.
Remove a number of other MPSAFE annotations in the credential code and
tweak one or two other adjacent comments.
Add some comments to explain how 10 was picked. 20 was completely
arbitrary, at least 10 has some reasoning behind it.
Also, update the comments about how long we sleep to reflect the new,
shorter timeout we use.
- Remove unnecessary findcpuspeed() function.
- Initialize the timer_freq in i8254_init().
- Fix inittodr() and resettodr(). These are broken by rev.1.154.
If these drivers are setting M_VLANTAG because they are stripping the
layer 2 802.1Q headers, then they need to be re-inserting them so any
bpf(4) peers can properly decode them.
It should be noted that this is compiled tested only.
MFC after: 3 weeks
uuencoded format along with their respective LICENSE files.
- Add new share/doc/legal directory to BSD.usr.dist mtree file. This is the
place we install LICENSE files for restricted firmwares.
- Teach firmware(9) and kmod.mk about licensed firmwares. Restricted firmwares
won't load properly unless legal.<name>.license_ack is set to 1, either
via kenv(1) or /boot/loader.conf.
Reviewed by: mlaier, sam
Permitted by: Intel (via Andrew Wilson)
MFC after: 1 month
to embed up to four counters in outgoing packets. The message specifies
the offset at which the counter should be inserted as well as the
parameters of the counter.
Example usage:
ngctl msg src0: setcounter \
'{ index=0 offset=0x40 flags=1 width=4 increment=1 max_val=12345 }'
Sponsored by: Sandvine Incorporated
to embed a timestamp (struct timeval) in outgoing packets. The message
specifies the offset at which the timestamp should be inserted.
NG_SOURCE(4) gives an example usage that queues an ICMP packet. Using that
example, the following command will insert a timestamp in the ICMP's data
payload:
ngctl msg src0: settimestamp '{ offset=0x2a flags=1 }'
Sponsored by: Sandvine Incorporated
this patch the code behaves according to the comment on the line above.
Without this patch, a socket could cause SIGPIPE to be delivered to its
process, once with SO_NOSIGPIPE set, and twice without.
With this patch, the kernel now passes the sigpipe regression test.
Tested by: Anton Yuzhaninov
MFC after: 1 week
An mbuf packet chain with the M_PROMISC flag set contains a unicast packet
received by the link layer, which does not correspond to any configured
link layer address in the local system.
It is copied when copying m_pkthdr. It is not cleared when crossing layers.
As such, it is defined to have a flag value which is outside of the
M_PROTO* range, like M_VLANTAG has.
Reviewed by: andre
Obtained from: NetBSD
been set at the socket layer, in our somewhat convoluted IPv4 source
selection logic in ip_output().
IP_ONESBCAST is actually a special case of SO_DONTROUTE, as 255.255.255.255
must always be delivered on a local link with a TTL of 1.
If IP_ONESBCAST has been set at the socket layer, also perform destination
interface lookup for point-to-point interfaces based on the destination
address of the link; previously it was not possible to use the option with
such interfaces; also, the destination/broadcast address fields map to the
same field within struct ifnet, which doesn't help matters.
One more valid fix going forward for these issues is to treat 255.255.255.255
as a destination in its own right in the forwarding trie. Other
implementations do this. It fits with the use of multiple paths, though
it then becomes necessary to specify interface preference.
This hack will eventually go away when that comes to pass.
Reviewed by: andre
MFC after: 1 week
and optimize away unused stack values. The 48 bytes that the lock_profile_object
adds to the stack evidently has a measurable performance impact on certain workloads.
uipc_send in cases where only a global read lock is held by breaking
them out and avoiding the unpcb lock acquire in the common case. This
avoids deadlocks which manifested with X11, and should also marginally
further improve performance.
Reported by: sepotvin, brooks
Add macro EVL_APPLY_VLID() which may be used to apply an 802.1q VLAN ID
to the M_VLANTAG field in an mbuf packet header non-destructively.
This will be used by net80211 to begin with.
Add macro EVL_APPLY_PRI() which may be used to apply an 802.1p priority
class to the M_VLANTAG field in an mbuf packet header non-destructively.
Add other macros for manipulating tags and the CFI bit.
Submitted by: Boris Kovalenko (EVL_CFIOFTAG(), EVL_MAKETAG())
to a READ_CAPACITY request rather than the maximum sector (off by one
problem). This causes a huge cascade of errors as the geom tasting
code tries to read the last sector (which isn't really there in the
face of this error). automated tools that manipulate disk labels and
such also have issues.
Create a new quirk READ_CAPACITY_OFFBY1 and add a quirk for the
SanDISK ImageMate that I have that suffers from this problem (the
SDDR-31). It intercepts the READ_CAPACITY response and adjusts it
from number of sectors to max sector for devices with this quirk.
Reading the Linux source suggests that there are a host of
other devices with this issue, including iPods and some popular
cameras. I've not added quirks for them, since I don't have the
devices in front of me to test.
it is initialized; use path instead.
This change fixes a panic when using atapicam in conjunction with CAMDEBUG,
which has been described under kern/103602.
Thanks to Josh Carroll <josh.carroll@gmail.com> for providing the traces
that allowed identifying this problem.
PR: kern/103602
MFC after: 1 week
- Fix missing initialization in kern_rwlock.c causing bogus times to be collected
- Move updates to the lock hash to after the lock is released for spin mutexes,
sleep mutexes, and sx locks
- Add new kernel build option LOCK_PROFILE_FAST - only update lock profiling
statistics when an acquisition is contended. This reduces the overhead of
LOCK_PROFILING to increasing system time by 20%-25% which on
"make -j8 kernel-toolchain" on a dual woodcrest is unmeasurable in terms
of wall-clock time. Contrast this to enabling lock profiling without
LOCK_PROFILE_FAST and I see a 5x-6x slowdown in wall-clock time.
arrangement that has no intrinsic internal knowledge of whether devices
it is given are truly multipath devices. As such, this is a simplistic
approach, but still a useful one.
The basic approach is to (at present- this will change soon) use camcontrol
to find likely identical devices and and label the trailing sector of the
first one. This label contains both a full UUID and a name. The name is
what is presented in /dev/multipath, but the UUID is used as a true
distinguishor at g_taste time, thus making sure we don't have chaos
on a shared SAN where everyone names their data multipath as "Fred".
The first of N identical devices (and N *may* be 1!) becomes the active
path until a BIO request is failed with EIO or ENXIO. When this occurs,
the active disk is ripped away and the next in a list is picked to
(retry and) continue with.
During g_taste events new disks that meet the match criteria for existing
multipath geoms get added to the tail end of the list.
Thus, this active/passive setup actually does work for devices which
go away and come back, as do (now) mpt(4) and isp(4) SAN based disks.
There is still a lot to do to improve this- like about 5 of the 12
recommendations I've received about it, but it's been functional enough
for a while that it deserves a broader test base.
Reviewed by: pjd
Sponsored by: IronPort Systems
MFC: 2 months
Linux does not check file descriptor when MAP_ANONYMOUS is set.
This should fix recent LTP test regressions.
Reported by: Scot Hetzel (swhetzel at gmail dot com)
netchild
case where it asynchronously exits burst mode on its own. Handle different
values of hz in sleep loop. Provide more debugging options to tune EC
behavior. These tunables/sysctls may be temporary and are not for user
access if the EC is working properly. Burst mode is now on by default for
testing and the poll interval has been increased from 100 to 500 us and
total timeout from 100 to 500 ms.
Hopefully this should be the first step of addressing reports of timeout
errors during battery or thermal access, especially on HP/Compaq laptops.
It is reasonably stable and should not cause a loss of functionality or
performance on systems that were previously working. Testing shows an
increase of responsiveness by ~75% on one system.
PR: kern/98171
potential issues where the peer does not close, potentially leaving
thousands of connections in FIN_WAIT_2. This is controlled by a new sysctl
fast_finwait2_recycle, which is disabled by default.
Reviewed by: gnn, silby.
- BIOCGDIRECTION and BIOCSDIRECTION get or set the setting determining
whether incoming, outgoing, or all packets on the interface should be
returned by BPF. Set to BPF_D_IN to see only incoming packets on the
interface. Set to BPF_D_INOUT to see packets originating locally and
remotely on the interface. Set to BPF_D_OUT to see only outgoing
packets on the interface. This setting is initialized to BPF_D_INOUT
by default. BIOCGSEESENT and BIOCSSEESENT are obsoleted by these but
kept for backward compatibility.
- BIOCFEEDBACK sets packet feedback mode. This allows injected packets
to be fed back as input to the interface when output via the interface is
successful. When BPF_D_INOUT direction is set, injected outgoing packet
is not returned by BPF to avoid duplication. This flag is initialized to
zero by default.
Note that libpcap has been modified to support BPF_D_OUT direction for
pcap_setdirection(3) and PCAP_D_OUT direction is functional now.
Reviewed by: rwatson
concurrency:
- Add per-unpcb mutexes protecting unpcb connection state, fields, etc.
- Replace global UNP mutex with a global UNP rwlock, which will protect the
UNIX domain socket connection topology, v_socket, and be acquired
exclusively before acquiring more than per-unpcb at a time in order to
avoid lock order issues.
In performance measurements involving MySQL, this change has little or no
overhead on UP (+/- 1%), but leads to a significant (5%-30%) improvement in
multi-processor measurements using the sysbench and supersmack benchmarks.
Much testing by: kris
Approved by: re (kensmith)
determine if it holds an exclusive rwlock reference or not. This is
non-ideal, but recursion scenarios in the network stack currently
require it.
Approved by: jhb
call which can easily lock up a system otherwise; instead,
return ENOBUFS as documented in a manpage, thus reverting
us to the FreeBSD 4.x behavior.
Reviewed by: rwatson
MFC after: 2 weeks
- only collect timestamps when a lock is contested - this reduces the overhead
of collecting profiles from 20x to 5x
- remove unused function from subr_lock.c
- generalize cnt_hold and cnt_lock statistics to be kept for all locks
- NOTE: rwlock profiling generates invalid statistics (and most likely always has)
someone familiar with that should review
attribute. Also define some macros to manipulate one of these
structures. Explain their use in the extattr.9 manual page.
The next step will be to make a sweep through the kernel replacing
the old pointer manipulation code. To get an idea of how they would
be used, the ffs_findextattr() function in ufs/ffs/ffs_vnops.c is
currently written as follows:
/*
* Vnode operating to retrieve a named extended attribute.
*
* Locate a particular EA (nspace:name) in the area (ptr:length), and return
* the length of the EA, and possibly the pointer to the entry and to the data.
*/
static int
ffs_findextattr(u_char *ptr, u_int length, int nspace, const char *name,
u_char **eap, u_char **eac)
{
u_char *p, *pe, *pn, *p0;
int eapad1, eapad2, ealength, ealen, nlen;
uint32_t ul;
pe = ptr + length;
nlen = strlen(name);
for (p = ptr; p < pe; p = pn) {
p0 = p;
bcopy(p, &ul, sizeof(ul));
pn = p + ul;
/* make sure this entry is complete */
if (pn > pe)
break;
p += sizeof(uint32_t);
if (*p != nspace)
continue;
p++;
eapad2 = *p++;
if (*p != nlen)
continue;
p++;
if (bcmp(p, name, nlen))
continue;
ealength = sizeof(uint32_t) + 3 + nlen;
eapad1 = 8 - (ealength % 8);
if (eapad1 == 8)
eapad1 = 0;
ealength += eapad1;
ealen = ul - ealength - eapad2;
p += nlen + eapad1;
if (eap != NULL)
*eap = p0;
if (eac != NULL)
*eac = p;
return (ealen);
}
return(-1);
}
After applying the structure and macros, it would look like this:
/*
* Vnode operating to retrieve a named extended attribute.
*
* Locate a particular EA (nspace:name) in the area (ptr:length), and return
* the length of the EA, and possibly the pointer to the entry and to the data.
*/
static int
ffs_findextattr(u_char *ptr, u_int length, int nspace, const char *name,
u_char **eapp, u_char **eac)
{
struct extattr *eap, *eaend;
eaend = (struct extattr *)(ptr + length);
for (eap = (struct extattr *)ptr; eap < eaend; eap = EXTATTR_NEXT(eap)){
/* make sure this entry is complete */
if (EXTATTR_NEXT(eap) > eaend)
break;
if (eap->ea_namespace != nspace ||
eap->ea_namelength != length ||
bcmp(eap->ea_name, name, length))
continue;
if (eapp != NULL)
*eapp = eap;
if (eac != NULL)
*eac = EXTATTR_CONTENT(eap);
return (EXTATTR_CONTENT_SIZE(eap));
}
return(-1);
}
Not only is it considerably shorter, but it hopefully more readable :-)
PRIO_USER case, possibly also other places that deferences
p_ucred.
In the past, we insert a new process into the allproc list right
after PID allocation, and release the allproc_lock sx. Because
most content in new proc's structure is not yet initialized,
this could lead to undefined result if we do not handle PRS_NEW
with care.
The problem with PRS_NEW state is that it does not provide fine
grained information about how much initialization is done for a
new process. By defination, after PRIO_USER setpriority(), all
processes that belongs to given user should have their nice value
set to the specified value. Therefore, if p_{start,end}copy
section was done for a PRS_NEW process, we can not safely ignore
it because p_nice is in this area. On the other hand, we should
be careful on PRS_NEW processes because we do not allow non-root
users to lower their nice values, and without a successful copy
of the copy section, we can get stale values that is inherted
from the uninitialized area of the process structure.
This commit tries to close the race condition by grabbing proc
mutex *before* we release allproc_lock xlock, and do copy as
well as zero immediately after the allproc_lock xunlock. This
guarantees that the new process would have its p_copy and p_zero
sections, as well as user credential informaion initialized. In
getpriority() case, instead of grabbing PROC_LOCK for a PRS_NEW
process, we just skip the process in question, because it does
not affect the final result of the call, as the p_nice value
would be copied from its parent, and we will see it during
allproc traverse.
Other potential solutions are still under evaluation.
Discussed with: davidxu, jhb, rwatson
PR: kern/108071
MFC after: 2 weeks
semi-automatic style(9)
The futex stuff already differs a lot (only a small part does not differ)
from NetBSD, so we are already way off and can't apply changes from NetBSD
automatically. As we need to merge everything by hand already, we can even
make the files comply to our world order.
(external) microphone pin tend to screw it. Internal microphone (found
on several laptops) still need high VRef.
Tested by: Pietro Cerutti <pietro.cerutti@gmail.com>
lenix <irc.freenode.net>
immediately flag any page that is allocated to a OBJT_PHYS object as
unmanaged in vm_page_alloc() rather than waiting for a later call to
vm_page_unmanage(). This allows for the elimination of some uses of
the page queues lock.
Change the type of the kernel and kmem objects from OBJT_DEFAULT to
OBJT_PHYS. This allows us to take advantage of the above change to
simplify the allocation of unmanaged pages in kmem_alloc() and
kmem_malloc().
Remove vm_page_unmanage(). It is no longer used.
It is built in the same module as IPv4 multicast forwarding, i.e. ip_mroute.ko,
if and only if IPv6 support is enabled for loadable modules.
Export IPv6 forwarding structs to userland netstat(1) via sysctl(9).
- Dont "return" in linux_clone() after we forked the new process in a case
of problems.
- Move the copyout of p2->p_pid outside the emul_lock coverage in
linux_clone().
- Cache the em->pdeath_signal in a local variable and move the copyout
out of the emul_lock coverage.
- Move the free() out of the emul_shared_lock coverage in a preparation
to switch emul_lock to non-sleepable lock (mutex).
Submitted by: rdivacky
an ICB. This shows up on card restarts, and usually for
2200-2300 cards. What happens is that we start up,
attempting to acquire a hard address. We end up instead
being an F-port topology, which reports out a loop id
of 0xff (or 0xffff for 2K Login f/w). Then, if we restart,
we end up telling the card to go off an acquire this loop
address, which the card then rejects. Bah.
Compilation fixes from Solaris port.
I created and tested this with a custom FreeSBIE cd-image.
PR: i386/96452
Submitted by: Yuichiro Goto <y7goto at gmail dot com>
MFC after: 3 days
Approved by: imp (mentor)
inode's i_flag.
It's possible that after ufs_infactive() calls softdep_releasefile(),
i_nlink stays >0 for a considerable amount of time (> 60 seconds here).
During this period, any ffs allocation routines that alter di_blocks
must also account for the blocks in the filesystem's fs_pendingblocks
value.
This change fixes an eventual df/du discrepency that will happen as
the result of fs_pendingblocks being reduced to <0.
The only manifestation of this that people may recognise is the
following message on boot:
/somefs: update error: blocks -N files M
at which point the negative pending block count is adjusted to zero.
Reviewed by: tegge
MFC after: 3 weeks
freshly-loaded kernel module. To avoid various unload races, hide linker
files whose sysinit's are being run from userland so that they can't be
kldunloaded until after all the sysinit's have finished.
Tested by: gallatin
changes. This should ease the job of maintaining codebase since much
of the regression tests are done across os versions.
- bus_setup_intr() -> snd_setup_intr().
