From the README:
Any IEEE 802.11 cards use AMD Am79C930 and Harris (Intersil) Chipset
with PCnetMobile firmware by AMD.
BayStack 650 1Mbps Frequency Hopping PCCARD adapter
BayStack 660 2Mbps Direct Sequence PCCARD adapter
Icom SL-200 2Mbps Direct Sequence PCCARD adapter
Melco WLI-PCM 2Mbps Direct Sequence PCCARD adapter
NEL SSMagic 2Mbps Direct Sequence PCCARD adapter
Netwave AirSurfer Plus
1Mbps Frequency Hopping PCCARD adapter
Netwave AirSurfer Pro
2Mbps Direct Sequence PCCARD adapter
Known Problems:
WEP is not supported.
Does not create IBSS itself.
Cannot configure the following on FreeBSD:
selection of infrastructure/adhoc mode
ESSID
...
Submitted by: Atsushi Onoe <onoe@sm.sony.co.jp>
contains the ADMtek Pegasus AN986 USB chipset. The
adapter supports both 10BaseT and 100BaseT (including
full-duplex). The product code for these adapters is
0x2206.
These got replaced by BUS_SETUP_INTR().
This once again illustrates an API change without informing -doc, so
that these sort post cleanup actions could've been avoided.
And then people wonder why the docs suck so much at times.
Reviewed by: peter
reserve, in maximal NFS packets. Originally only 2 packets worth of
space was reserved. The default is now 4, which appears to greatly
improve performance for slow to mid-speed machines on gigabit networks.
Add documentation and correct some prior documentation.
Problem Researched by: Andrew Gallatin <gallatin@cs.duke.edu>
Approved by: jkh
Get rid of the "char *" before level which made no sense. Change
"char *msg" to the properly const-unpoisoned one.
Just SPLASSERT.9:
Add an Xref to CONDSPLASSERT(9). Change the function name "rtredirect"
to the correct "rtalloc".
not the current BPF device should report locally generated packets or not.
This allows sniffing applications to see only packets that are not generated
locally, which can be useful for debugging bridging problems, or other
situations where MAC addresses are not sufficient to identify locally
sourced packets. Default to true for this flag, so as to provide existing
behavior by default.
Introduce two new ioctls, BIOCGSEESENT and BIOCSSEESENT, which may be used
to manipulate this flag from userland, given appropriate privilege.
Modify bpf.4 to document these two new ioctl arguments.
Reviewed by: asmodai
``Depending on the setting of the sysctl variable `net.inet.ipfw.one_pass'
Packets coming from a pipe ...''
into
``... the sysctl variable `net.ipfw.one_pass', packets coming from ...''
while the other half used `vap', and in one case resulted in code that
made no sense. Replaced all of them with `vap'.
(Typically, `vpp' is a pointer to a pointer to a struct vnode anyway).
* Apply sentence breaking style.
* Add missing periods to the ends of sentences.
* Replace bogus use of Nm with Em and Pa as appropriate.
* Rename the EXAMPLE section to EXAMPLES.
* Tidy up wording and fix spelling errors.
* Use an Rs -> Re block instead of Xr for the SourceForge URL.
* Correct the SourceForge URL.
* Improve the compilation instructions for the SourceForge utilities.
Approved by: n_hibma
Use Dv and Va macros for defined values and variables,
respectively.
Use proper tag lists instead of approximations.
Use Xr for cross-references.
Make illegal sections legal subsections.
Use An and Aq to mark up author names and addresses,
Respectively.
I discussed this with Jason Evans and he's put these on his to-do list.
PR: 16537
Submitted by: AnarCat <beaupran@iro.umontreal.ca>
Approved by: jasone
Fix a few more namespace messes and whitespace curiosities in acl.h
Fix comments in acl.h
Clean up some function prototypes from acl.h that won't be committed
before the code freeze.
Some of this kindly pointed out by: the ever patient bde
Spell diskcontroller as disk controller.
There is no more CMD640 option.
bad144 got axed. Reflect change.
Contract the /dev entries to one /dev/wd* entry which we call
wd device nodes to reflect the merger of character and block
devices.
Add small line to NOTES stating that wd will some be replaced
completely by ata/ad.
Suggested by: bde
NICs. (Finally!) The PCMCIA, ISA and PCI varieties are all supported,
though only the ISA and PCI ones will work on the alpha for now.
PCCARD, ISA and PCI attachments are all provided. Also provided an
ancontrol(8) utility for configuring the NIC, man pages, and updated
pccard.conf.sample. ISA cards are supported in both ISA PnP and hard-wired
mode, although you must configure the kernel explicitly to support the
hardwired mode since you have to know the I/O address and port ahead
of time.
Special thanks to Doug Ambrisko for doing the initial newbus hackery
and getting it to work in infrastructure mode.
USB-EL1202A chipset. Between this and the other two drivers, we should
have support for pretty much every USB ethernet adapter on the market.
The only other USB chip that I know of is the SMC USB97C196, and right
now I don't know of any adapters that use it (including the ones made
by SMC :/ ).
Note that the CATC chip supports a nifty feature: read and write combining.
This allows multiple ethernet packets to be transfered in a single USB
bulk in/out transaction. However I'm again having trouble with large
bulk in transfers like I did with the ADMtek chip, which leads me to
believe that our USB stack needs some work before we can really make
use of this feature. When/if things improve, I intend to revisit the
aue and cue drivers. For now, I've lost enough sanity points.
ethernet adapters that are supported by the aue and kue drivers.
There are actually a couple more out there from Accton, Asante and
EXP Computer, however I was not able to find any Windows device
drivers for these on their servers, and hence could not harvest
their vendor/device ID info. If somebody has one of these things
and can look in the .inf file that comes with the Windows driver,
I'd appreciate knowing what it says for 'VID' and 'PID.'
Additional adapters include: the D-Link DSB-650 and DSB-650TX, the
SMC 2102USB, 2104USB and 2202USB, the ATen UC10T, and the Netgear EA101.
These are all mentioned in the man pages, relnotes and LINT.
Also correct the date in the kue(4) man page. I wrote this thing
on Jan, 4 2000, not 1999.
Kawasaki LSI KL5KUSB101B chip, including the LinkSys USB10T, the
Entrega NET-USB-E45, the Peracom USB Ethernet Adapter, the 3Com
3c19250 and the ADS Technologies USB-10BT. This device is 10mbs
half-duplex only, so there's miibus or ifmedia support. This device
also requires firmware to be loaded into it, however KLSI allows
redistribution of the firmware images (I specifically asked about
this; they said it was ok).
Special thanks to Annelise Anderson for getting me in touch with
KLSI (eventually) and thanks to KLSI for providing the necessary
programming info.
Highlights:
- Add driver files to /sys/dev/usb
- update usbdevs and regenerate attendate files
- update usb_quirks.c
- Update HARDWARE.TXT and RELNOTES.TXT for i386 and alpha
- Update LINT, GENERIC and others for i386, alpha and pc98
- Add man page
- Add module
- Update sysinstall and userconfig.c
USB ethernet chip. Adapters that use this chip include the LinkSys
USB100TX. There are a few others, but I'm not certain of their
availability in the U.S. I used an ADMtek eval board for development.
Note that while the ADMtek chip is a 100Mbps device, you can't really
get 100Mbps speeds over USB. Regardless, this driver uses miibus to
allow speed and duplex mode selection as well as autonegotiation.
Building and kldloading the driver as a module is also supported.
Note that in order to make this driver work, I had to make what some
may consider an ugly hack to sys/dev/usb/usbdi.c. The usbd_transfer()
function will use tsleep() for synchronous transfers that don't complete
right away. This is a problem since there are times when we need to
do sync transfers from an interrupt context (i.e. when reading registers
from the MAC via the control endpoint), where tsleep() us a no-no.
My hack allows the driver to have the code poll for transfer completion
subject to the xfer->timeout timeout rather that calling tsleep().
This hack is controlled by a quirk entry and is only enabled for the
ADMtek device.
Now, I'm sure there are a few of you out there ready to jump on me
and suggest some other approach that doesn't involve a busy wait. The
only solution that might work is to handle the interrupts in a kernel
thread, where you may have something resembling a process context that
makes it okay to tsleep(). This is lovely, except we don't have any
mechanism like that now, and I'm not about to implement such a thing
myself since it's beyond the scope of driver development. (Translation:
I'll be damned if I know how to do it.) If FreeBSD ever aquires such
a mechanism, I'll be glad to revisit the driver to take advantage of
it. In the meantime, I settled for what I perceived to be the solution
that involved the least amount of code changes. In general, the hit
is pretty light.
Also note that my only USB test box has a UHCI controller: I haven't
I don't have a machine with an OHCI controller available.
Highlights:
- Updated usb_quirks.* to add UQ_NO_TSLEEP quirk for ADMtek part.
- Updated usbdevs and regenerated generated files
- Updated HARDWARE.TXT and RELNOTES.TXT files
- Updated sysinstall/device.c and userconfig.c
- Updated kernel configs -- device aue0 is commented out by default
- Updated /sys/conf/files
- Added new kld module directory
spl0) and some bitrot (the not-so-new callout_init/stop/reset functions
were not mentioned; the callout_activate/deactivate/pending macros are
still not mentioned).
Submitted by: mostly by jlemon
needed to access the internals of buffers but not necessarily to use
the VOP. <sys/buf.h> recently grew a bogus dependency on <sys/systm.h>
for the declaration of spl*, and I prefer to fix the synopsis breakage
by removing a wart instead of adding one.
VOP_ABORTOP() went away. at_shutdown() was replaced by undocumented
event handling. Rename remove_dev() here too, and remove the dead
and dead wrong man pages.
misdetecting FIFO capabilities, at least on my girlfriend's Thinkpad 755,
the driver doesn't work using the FIFO.
While i was at it, i (partially) fixed option FCC_YE since it would no
longer have compiled at all under -current. I've also made an attempt
to document the device driver flags value (ab-)used internally by this
option.
RELENG_3 candidate, but with a slightly different patch there (will go
to jkh in email).
parent being locked, but rather plays some hide and seek (does not lock if
dvp == vp).
Also add a BUGS section noting that this is undesired behaviour.
- isa => nexus
- flags
- GPL_MATH_EMULATE
- document breakage of non-GPL emulator since we use new compiler.
- break lines in paragraohs I touched so that sentenses start on new
lines.
of manual page sections. Make the two man pages consistent
with each other in the headers they list and they order they list
them in.
Note: this is the preferred ordering. All new man pages/additions
to man pages should try and follow this. Existing man pages
should be left alone, unless you are making major changes in
the man page and re-ordering of the sections is only a
minor part of the change.
PR: doc/15352, doc/15353
background ]
Rename sys/pci/pci_ioctl.h to sys/sys/pciio.h to make it easier for
userland programs to use this interface. Reformat the file, and add a
BSD-style copyright to it.
Add a new man page for pci(4). The PCIOCGETCONF, PCIOCREAD, and PCIOCWRITE
ioctls are documented, but the PCIOCATTACHED ioctl is not documented
because it is not implemented.
Change includes of <pci/pci_ioctl.h> to <sys/pciio.h> or remove them
altogether. In many cases, pci_ioctl.h was unused.
Reviewed by: steve
The same goes for CD drivers and tape drivers. In systems with mixed IDE
and SCSI, devices in the same priority class will be sorted in attach
order.
Also, the 'CCD' priority is now the 'ARRAY' priority, and a number of
drivers have been modified to use that priority.
This includes the necessary changes to all drivers, except the ATA drivers.
Soren will modify those separately.
This does not include and does not require any change in the devstat
version number, since no known userland applications use the priority
enumerations.
Reviewed by: msmith, sos, phk, jlemon, mjacob, bde
which it replaces. The new driver supports all of the chips supported
by the ones it replaces, as well as many DEC/Intel 21143 10/100 cards.
This also completes my quest to convert things to miibus and add
Alpha support.
[This] updates [elf.5] from the enitial work I did in Queen's (UK) English to
American English, as is normal for the -doc project stuff.
Submitted by: Jeroen Ruigrok van der Werven <asmodai@wxs.nl>
NGM_BINARY2ASCII, which convert control messages to ASCII and back.
This allows control messages to be sent and received in ASCII form
using ngctl(8), which makes ngctl a lot more useful.
This also allows all the type-specific debugging code in libnetgraph
to go away -- instead, we just ask the node itself to do the ASCII
translation for us.
Currently, all generic control messages are supported, as well as
messages associated with the following node types: async, cisco,
ksocket, and ppp.
See /usr/share/examples/netgraph/ngctl for an example of using this.
Also give ngctl(8) the ability to print out incoming data and
control messages at any time. Eventually nghook(8) may be subsumed.
Several other misc. bug fixes.
Reviewed by: julian
eischen (Daniel Eischen) added wrappers to protect against cancled
threads orphaning internal resources.
the cancelability code is still a bit fuzzy but works for test
programs of my own, OpenBSD's and some examples from ORA's books.
add readdir_r to both libc and libc_r
add some 'const' attributes to function parameters
Reviewed by: eischen, jasone
linked list to store the callbak routines. The patch converts the
lists to queue(3) TAILQs, making the code slightly clearer and ensuring
that callbacks are executed in FIFO order.
Man page also updated as necesary.
(discontinued use of M_TEMP malloc type while here anyway /phk)
Submitted by: Jake Burkholder jake@checker.org
PR: 14912
