The dtrace provider for UDP-Lite is modeled after the UDP provider.
This fixes the bug that UDP-Lite packets were triggering the UDP
provider.
Thanks to dteske@ for providing the dwatch module.
Reviewed by: dteske@, markj@, rrs@
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D16377
9421 zdb should detect and print out the number of "leaked" objects
9422 zfs diff and zdb should explicitly mark objects that are on the deleted queue
illumos/illumos-gate@20b5dafb42
Reviewed by: Matt Ahrens <matt@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Approved by: Matt Ahrens <mahrens@delphix.com>
Author: Paul Dagnelie <pcd@delphix.com>
9102 zfs should be able to initialize storage devices
The first access to a disk block can incur a performance penalty on some
platforms (e.g. AWS's EBS, VMware VMDKs). Therefore it is recommended that
volumes be "thick provisioned", where supported by the platform (VMware).
Thick provisioning is time consuming and often is ignored. If the thick
provision step is omitted, customers will see suboptimal performance until
we have written to all parts of the LUN. ZFS should be able to initialize
any unused storage to remove any first-write penalty that exists.
illumos/illumos-gate@094e47e980
Reviewed by: John Wren Kennedy <john.kennedy@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
Author: George Wilson <george.wilson@delphix.com>
We should use zfs_dbgmsg instead of spa_dbgmsg. Or at least,
metaslab_condense() should call zfs_dbgmsg because it's important and rare
enough to always log. It's possible that the message in zio_dva_allocate()
would be too high-frequency for zfs_dbgmsg.
illumos/illumos-gate@21f7c81cc1
Reviewed by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Richard Elling <Richard.Elling@RichardElling.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
Author: Matthew Ahrens <mahrens@delphix.com>
Mirrors are supposed to provide redundancy in the face of whole-disk failure
and silent damage (e.g. some data on disk is not right, but ZFS hasn't
detected the whole device as being broken). However, the current device
removal implementation bypasses some of the mirror's redundancy.
illumos/illumos-gate@3a4b1be953
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Prashanth Sreenivasa <pks@delphix.com>
Reviewed by: Sara Hartse <sara.hartse@delphix.com>
Reviewed by: Serapheim Dimitropoulos <serapheim@delphix.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Tim Chase <tim@chase2k.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
Author: Matthew Ahrens <mahrens@delphix.com>
The current space map encoding has the following disadvantages:
[1] Assuming 512 sector size each entry can represent at most 16MB for a segment.
This makes the encoding very inefficient for large regions of space.
[2] As vdev-wide space maps have started to be used by new features (i.e.
device removal, zpool checkpoint) we've started imposing limits in the
vdevs that can be used with them based on the maximum addressable offset
(currently 64PB for a top-level vdev).
The new remains backwards compatible with the old one. The introduced
two-word entry format, besides extending the limits imposed by the single-entry
layout, also includes a vdev field and some extra padding after its prefix.
The extra padding after the prefix should is reserved for future usage (e.g.
new prefixes for future encodings or new fields for flags). The new vdev field
not only makes the space maps more self-descriptive, but also opens the doors
for pool-wide space maps.
One final important note is that the number of bits used for vdevs is reduced
to 24 bits for blkptrs. That was decided as we don't know of any setups that
use more than 16M vdevs for the time being and
we wanted to fit the vdev field in the space map. In addition that gives us
some extra bits in dva_t.
illumos/illumos-gate@17f11284b4
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <gwilson@zfsmail.com>
Approved by: Gordon Ross <gwr@nexenta.com>
Author: Serapheim Dimitropoulos <serapheim@delphix.com>
When a ZFS volume is created with zfs create -V (but without -s), the
refreservation property is set to a value that is volsize plus the maximum
size of metadata. If refreservation is ever set to another value, it is
impossible to set it back to the automatically determined value. There are
other cases where refreservation may be wrong. These include receiving a
volume that was sent without properties and zfs clone.
We need:
zfs set refreservation=auto <volume>
zfs clone -o refreservation=auto <volume>
Each one would use the same function used by zfs create -V to determine the
proper value for refreservation.
illumos/illumos-gate@1c10ae76c0
Reviewed by: Allan Jude <allanjude@freebsd.org>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Reviewed by: Andy Stormont <astormont@racktopsystems.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
Author: Mike Gerdts <mike.gerdts@joyent.com>
Ensure that the TCP connections are terminated gracefully as expected
by the test. Use appropriate numbers for sent/received packets.
In addition, enable tst.localtcpstate.ksh, which should pass, but
doesn't until https://reviews.freebsd.org/D16369 is committed.
Reviewed by: markj@
Sponsored by: Netflix, Inc.
Differential Revision: https://reviews.freebsd.org/D16288
This change is similar to the one done in r286171 for
tst.ipv4localtcp.ksh. This not only reduces the requirements on the
system used for testing but results also in a graceful teardown of
the TCP connection.
Reviewed by: gnn@
Sponsored by: Netflix, Inc.
Differential Revision: https://reviews.freebsd.org/D16276
The code imported from opensolaris was depending on ping supporting
UDP for sending probes. Since this is not supported by ping on FreeBSD
use a perl script instead.
The remote test requires the usage of ksh93, so state that in the
sheband.
Enable the local test, but keep the remote test disabled, since it
requires a remote machine on the LAN.
Reviewed by: markj@, gnn@
Sponsored by: Netflix, Inc.
Differential Revision: https://reviews.freebsd.org/D16268
Since we don't have /usr/bin/ksh, use a generic way of specifying
ksh. Some of the tests only run with ksh93, so use this shell
for these tests. Two of the tests don't have the execute bit set,
so fix this, too.
Reviewed by: markj@
Sponsored by: Netflix, Inc.
Differential Revision: https://reviews.freebsd.org/D16270
d4a72f2386
During scans (scrubs or resilvers), it sorts the blocks in each transaction
group by block offset; the result can be a significant improvement. (On my
test system just now, which I put some effort to introduce fragmentation into
the pool since I set it up yesterday, a scrub went from 1h2m to 33.5m with the
changes.) I've seen similar rations on production systems.
Approved by: Alexander Motin
Obtained from: ZFS On Linux
Relnotes: Yes (improved scrub performance, with tunables)
Differential Revision: https://reviews.freebsd.org/D15562
The default provides output in the following form:
```
NAME SIZE ALLOC FREE CKPOINT EXPANDSZ FRAG CAP DEDUP
HEALTH ALTROOT
```
this corrects the man page.
Also submitted upstream as
https://github.com/openzfs/openzfs/pull/632/files (with slightly
different changes needed)
The change adds -t <name> option to zpool create and -t option to zpool
import in its form with an old name and a new name. This allows to
import (or create) a pool under a name that's different from its real,
permanent name without affecting that name. This is useful when working
with VM images or images of other physical systems if they happen to
have a ZFS pool with the same name as the host system.
The changes come from ZoL with some small tweaks.
The porting has been done by julian.
The change is being submitted to OpenZFS:
https://github.com/openzfs/openzfs/pull/600
Submitted by: julian
Reviewed by: smh
MFC after: 2 weeks
Sponsored by: Panzura (porting)
Differential Revision: https://reviews.freebsd.org/D14972
9280 Assertion failure while running removal_with_ganging test with 4K devices
illumos/illumos-gate@243952c7ee
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Approved by: Garrett D'Amore <garrett@damore.org>
Author: Matt Ahrens <Matt.Ahrens@delphix.com>
9235 rename zpool_rewind_policy_t to zpool_load_policy_t
illumos/illumos-gate@5dafeea3eb
We want to be able to pass various settings during import/open of a pool,
which are not only related to rewind. Instead of adding a new policy and
duplicate a bunch of code, we should just rename rewind_policy to a more
generic term like load_policy.
For instance, we'd like to set spa->spa_import_flags from the nvlist,
rather from a flags parameter passed to spa_import as in some cases we want
those flags not only for the import case, but also for the open case. One
such flag could be ZFS_IMPORT_MISSING_LOG (as used in zdb) which would
allow zfs to open a pool when logs are missing.
Reviewed by: Matt Ahrens <matt@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Pavel Zakharov <pavel.zakharov@delphix.com>
illumos/illumos-gate@8671400134
The idea of Storage Pool Checkpoint (aka zpool checkpoint) deals with
exactly that. It can be thought of as a “pool-wide snapshot” (or a
variation of extreme rewind that doesn’t corrupt your data). It remembers
the entire state of the pool at the point that it was taken and the user
can revert back to it later or discard it. Its generic use case is an
administrator that is about to perform a set of destructive actions to ZFS
as part of a critical procedure. She takes a checkpoint of the pool before
performing the actions, then rewinds back to it if one of them fails or puts
the pool into an unexpected state. Otherwise, she discards it. With the
assumption that no one else is making modifications to ZFS, she basically
wraps all these actions into a “high-level transaction”.
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
Author: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com>
8809 libzpool should leverage work done in libfakekernel
illumos/illumos-gate@f06dce2c1f
Reviewed by: Sebastien Roy <sebastien.roy@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Gordon Ross <gordon.w.ross@gmail.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
Author: Andrew Stormont <astormont@racktopsystems.com>
We do not have libfakekernel, but need to reduce code divergence.
illumos/illumos-gate@edc8ef7d92
Reviewed by: C Fraire <cfraire@me.com>
Reviewed by: Andy Fiddaman <omnios@citrus-it.co.uk>
Approved by: Joshua M. Clulow <josh@sysmgr.org>
Author: Toomas Soome <tsoome@me.com>
9075 Improve ZFS pool import/load process and corrupted pool recovery
illumos/illumos-gate@6f7938128a
Some work has been done lately to improve the debugability of the ZFS pool
load (and import) process. This includes:
https://www.illumos.org/issues/7638: Refactor spa_load_impl into several functions
https://www.illumos.org/issues/8961: SPA load/import should tell us why it failed
https://www.illumos.org/issues/7277: zdb should be able to print zfs_dbgmsg's
To iterate on top of that, there's a few changes that were made to make the
import process more resilient and crash free. One of the first tasks during the
pool load process is to parse a config provided from userland that describes
what devices the pool is composed of. A vdev tree is generated from that config,
and then all the vdevs are opened.
The Meta Object Set (MOS) of the pool is accessed, and several metadata objects
that are necessary to load the pool are read. The exact configuration of the
pool is also stored inside the MOS. Since the configuration provided from
userland is external and might not accurately describe the vdev tree
of the pool at the txg that is being loaded, it cannot be relied upon to safely
operate the pool. For that reason, the configuration in the MOS is read early
on. In the past, the two configurations were compared together and if there was
a mismatch then the load process was aborted and an error was returned.
The latter was a good way to ensure a pool does not get corrupted, however it
made the pool load process needlessly fragile in cases where the vdev
configuration changed or the userland configuration was outdated. Since the MOS
is stored in 3 copies, the configuration provided by userland doesn't have to be
perfect in order to read its contents. Hence, a new approach has been adopted:
The pool is first opened with the untrusted userland configuration just so that
the real configuration can be read from the MOS. The trusted MOS configuration
is then used to generate a new vdev tree and the pool is re-opened.
When the pool is opened with an untrusted configuration, writes are disabled
to avoid accidentally damaging it. During reads, some sanity checks are
performed on block pointers to see if each DVA points to a known vdev;
when the configuration is untrusted, instead of panicking the system if those
checks fail we simply avoid issuing reads to the invalid DVAs.
This new two-step pool load process now allows rewinding pools accross
vdev tree changes such as device replacement, addition, etc. Loading a pool
from an external config file in a clustering environment also becomes much
safer now since the pool will import even if the config is outdated and didn't,
for instance, register a recent device addition.
With this code in place, it became relatively easy to implement a
long-sought-after feature: the ability to import a pool with missing top level
(i.e. non-redundant) devices. Note that since this almost guarantees some loss
Of data, this feature is for now restricted to a read-only import.
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Andrew Stormont <andyjstormont@gmail.com>
Approved by: Hans Rosenfeld <rosenfeld@grumpf.hope-2000.org>
Author: Pavel Zakharov <pavel.zakharov@delphix.com>
illumos/illumos-gate@e144c4e6c9
Currently `zdb` consistently fails to examine non-idle pools as it fails
during the `spa_load()` process. The main problem seems to be that
`spa_load_verify()` fails as can be seen below:
$ sudo zdb -d -G dcenter
zdb: can't open 'dcenter': I/O error
ZFS_DBGMSG(zdb):
spa_open_common: opening dcenter
spa_load(dcenter): LOADING
disk vdev '/dev/dsk/c4t11d0s0': best uberblock found for spa dcenter. txg 40824950
spa_load(dcenter): using uberblock with txg=40824950
spa_load(dcenter): UNLOADING
spa_load(dcenter): RELOADING
spa_load(dcenter): LOADING
disk vdev '/dev/dsk/c3t10d0s0': best uberblock found for spa dcenter. txg 40824952
spa_load(dcenter): using uberblock with txg=40824952
spa_load(dcenter): FAILED: spa_load_verify failed [error=5]
spa_load(dcenter): UNLOADING
This change makes `spa_load_verify()` a dryrun when ran from `zdb`. This is
done by creating a global flag in zfs and then setting it in `zdb`.
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Andy Stormont <astormont@racktopsystems.com>
Approved by: Dan McDonald <danmcd@joyent.com>
Author: Pavel Zakharov <pavel.zakharov@delphix.com>
illumos/illumos-gate@5cabbc6b49https://www.illumos.org/issues/7614:
This project allows top-level vdevs to be removed from the storage pool with
“zpool remove”, reducing the total amount of storage in the pool. This
operation copies all allocated regions of the device to be removed onto other
devices, recording the mapping from old to new location. After the removal is
complete, read and free operations to the removed (now “indirect”) vdev must
be remapped and performed at the new location on disk. The indirect mapping
table is kept in memory whenever the pool is loaded, so there is minimal
performance overhead when doing operations on the indirect vdev.
The size of the in-memory mapping table will be reduced when its entries
become “obsolete” because they are no longer used by any block pointers in
the pool. An entry becomes obsolete when all the blocks that use it are
freed. An entry can also become obsolete when all the snapshots that
reference it are deleted, and the block pointers that reference it have been
“remapped” in all filesystems/zvols (and clones). Whenever an indirect block
is written, all the block pointers in it will be “remapped” to their new
(concrete) locations if possible. This process can be accelerated by using
the “zfs remap” command to proactively rewrite all indirect blocks that
reference indirect (removed) vdevs.
Note that when a device is removed, we do not verify the checksum of the data
that is copied. This makes the process much faster, but if it were used on
redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy
the wrong data, when we have the correct data on e.g. the other side of the
mirror. Therefore, mirror and raidz devices can not be removed.
Reviewed by: Alex Reece <alex@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Richard Laager <rlaager@wiktel.com>
Reviewed by: Tim Chase <tim@chase2k.com>
Approved by: Garrett D'Amore <garrett@damore.org>
Author: Prashanth Sreenivasa <pks@delphix.com>
illumos/illumos-gate@7855d95b307855d95b30https://www.illumos.org/issues/7446
Since we support whole-disk configuration for boot pool, we also will need
whole disk support with UEFI boot and for this, zpool create should create efi-
system partition.
I have borrowed the idea from oracle solaris, and introducing zpool create -
B switch to provide an way to specify that boot partition should be created.
However, there is still an question, how big should the system partition be.
For time being, I have set default size 256MB (thats minimum size for FAT32
with 4k blocks). To support custom size, the set on creation "bootsize"
property is created and so the custom size can be set as: zpool create B -
o bootsize=34MB rpool c0t0d0
After pool is created, the "bootsize" property is read only. When -B switch is
not used, the bootsize defaults to 0 and is shown in zpool get output with
value ''. Older zfs/zpool implementations are ignoring this property.
https://www.illumos.org/rb/r/219/
Reviewed by: Andrew Stormont <andyjstormont@gmail.com>
Reviewed by: Yuri Pankov <yuri.pankov@gmail.com>
Approved by: Dan McDonald <danmcd@kebe.com>
Author: Toomas Soome <tsoome@me.com>
This commit makes no sense for FreeBSD, that is why I blocked the option,
but it should be good to stay closer to upstream.
illumos/illumos-gate@c3c65d17f7c3c65d17f7https://www.illumos.org/issues/7502
Right now ztest executes zdb without -G, so when it has errors, the messages
are often not very helpful:
Executing zdb -bccsv -d -U /rpool/tmp/zpool.cache ztest
zdb: can't open 'ztest': Operation not supported
ztest: '/usr/sbin/amd64/zdb -bccsv -d -U /rpool/tmp/zpool.cache ztest' exit
code 1
With -G, we'd have:
/usr/sbin/amd64/zdb -bccsv -d -U /rpool/tmp/zpool.cache -G ztest
zdb: can't open 'ztest': Operation not supported
ZFS_DBGMSG(zdb):
spa_open_common: opening ztest
spa_load(ztest): LOADING
spa_load(ztest): FAILED: unable to parse config [error=48]
spa_load(ztest): UNLOADING
Which indicates where the error came from
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Approved by: Gordon Ross <gordon.w.ross@gmail.com>
Author: Pavel Zakharov <pavel.zakharov@delphix.com>
illumos/illumos-gate@3f7978d02b3f7978d02bhttps://www.illumos.org/issues/8081
zdb(8) is full of minor problems that generate compiler warnings. On FreeBSD,
which uses -WError, the only way to build it is to disable all compiler
warnings. This makes it much harder to detect newly introduced bugs. We should
cleanup all the warnings.
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
Author: Alan Somers <asomers@gmail.com>
Fix an assertion in zpool that causes a crash when running any "zpool add"
command on a spare that contains a replacing vdev with a spare child.
This likely affects Illumos, too.
PR: 225546
MFC after: 3 weeks
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D14138
illumos/illumos-gate@e9b7d6e7f7https://www.illumos.org/issues/8972:
'zfs holds -H' does not properly output content in scripted mode. It uses a
tab instead of two spaces, but it still pads column widths with spaces when
it should not.
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Dan McDonald <danmcd@joyent.com>
Author: Allan Jude <allanjude@freebsd.org>
illumos/illumos-gate@4ae5f5f06chttps://www.illumos.org/issues/8652:
Clang and GCC prefer to use unsigned ints to store enums. With Clang, that
causes tautological comparison warnings when comparing a zfs_prop_t or
zpool_prop_t variable to the macro ZPROP_INVAL. It's likely that error
handling code is being silently removed as a result.
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Igor Kozhukhov <igor@dilos.org>
Approved by: Gordon Ross <gwr@nexenta.com>
Author: Alan Somers <asomers@gmail.com>
8898 creating fs with checksum=skein on the boot pools fails ungracefully
illumos/illumos-gate@9fa2266d9ahttps://www.illumos.org/issues/8898:
# zfs create -o checksum=skein rpool/test
internal error: Result too large
Abort (core dumped)
Not a big deal per se, but should be handled correctly.
Reviewed by: Toomas Soome <tsoome@me.com>
Reviewed by: Andy Stormont <astormont@racktopsystems.com>
Approved by: Dan McDonald <danmcd@joyent.com>
Author: Yuri Pankov <yuri.pankov@nexenta.com>
PR: 222199
illumos/illumos-gate@a3b2868063https://www.illumos.org/issues/8677
We want to be able to run channel programs outside of synching context.
This would greatly improve performance of channel program that just gather
information, as we won't have to wait for synching context anymore.
This feature should introduce the following:
- A new command line flag in "zfs program" to specify our intention to
run in open context.
- A new flag/option within the channel program ioctl which selects the
context.
- Appropriate error handling whenever we try a channel program in
open-context that contains zfs.sync* expressions.
- Documentation for the new feature in the manual pages.
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: Chris Williamson <chris.williamson@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Serapheim Dimitropoulos <serapheim@delphix.com>
These return the jail ID and jail name for the traced process,
respectively, and are analogous to "zonename" on Solaris/illumos.
"zonename" is now aliased to "jailname".
Also add some stress tests for the new variables.
Submitted by: Domagoj Stolfa <domagoj.stolfa@gmail.com>
Reviewed by: dteske (previous version)
MFC after: 2 weeks
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D13877
This allows one to override the environment for processes created with
dtrace -c. By default, the environment is inherited.
This support was originally merged from illumos in r249367 but was lost
when the commit was later reverted and then brought back piecemeal.
Reported by: Samuel Lepetit <slepetit@apple.com>
MFC after: 2 weeks
We can't link an executable using -m32 until the lib32 phase of a
buildworld, though the build works fine when executing make from
cddl/usr.sbin/dtrace/tests. Some other solution will need to be found.
SPA_MAXBLOCKSIZE is 16 MB and having such a large object on the stack is
not nice in general and it could cause some confusing failures in the
single-user mode where the default stack size of 8 MB is used.
I expect that the upstream would make the same change.
MFC after: 1 week
illumos/illumos-gate@0a0551200e0a0551200ehttps://www.illumos.org/issues/640
du(1), df(1m), ls(1), and swap(1m) all include a copy (it appears literally
copied) of the 'number_to_scaled_string' function in their source. This should
be moved to a shared library and all 4 commands should use this instead.
FreeBSD note: of all libcmdutils functionality ZFS (and other illumos
contrib code) currently uses only nicenum() function (which is similar
to humanize_number but has some formatting differences). For this
reason I decided to not port the whole library. As a result, nicenum.c
from libcmdutils is compiled into libzfs and libzpool. This is a bit
ugly, but works. If one day we are forced to create libillumos, then
the file should be moved to that library.
Reviewed by: Sebastian Wiedenroth <wiedi@frubar.net>
Reviewed by: Robert Mustacchi <rm@joyent.com>
Reviewed by: Yuri Pankov <yuripv@gmx.com>
Approved by: Dan McDonald <danmcd@joyent.com>
Author: Jason King <jason.brian.king@gmail.com>
MFC after: 2 weeks
The upstream has converted their manual page to the same format as we
have, so we can use the upstream version with minimal modifications.
The current modifications are:
- different zpool.cache path
- different manual sections for zdb, zfs, zpool commands
igor reports a few minor issues, it would be nice to fix them both in
FreeBSD and in the upstream.
MFC after: 3 weeks
illumos/illumos-gate@4923c69fdd4923c69fdd
FreeBSD note: the manual page is to be updated separately.
https://www.illumos.org/issues/8067
Add an option to zdb to print a literal embedded block pointer supplied on the
command line:
zdb -E [-A] word0:word1:...:word15
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Alex Reece <alex@delphix.com>
Reviewed by: Yuri Pankov <yuri.pankov@gmail.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Matthew Ahrens <mahrens@delphix.com>
MFC after: 3 weeks
illumos/illumos-gate@dfd5965f7edfd5965f7e
FreeBSD note: the manual page is to be updated separately.
https://www.illumos.org/issues/6392
When given a pool name via -e, zdb would attempt an import. If it
failed, then it would attempt a verbatim import. This behavior is
not always desirable so a -V switch is added to zdb to control the
behavior. When specified, a verbatim import is done. Otherwise,
the behavior is as it was previously, except no verbatim import
is done on failure.
a5778ea242
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Yuri Pankov <yuri.pankov@gmail.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Author: Richard Yao <ryao@gentoo.org>
MFC after: 3 weeks
illumos/illumos-gate@ed61ec1da9ed61ec1da9
FreeBSD note: this commit does not update the manual page.
The original change includes conversion of the manual page from *roff format
to mandoc format. So, it is hard to extract the content change from
that. I am going to replace our zdb manual page, which is an earlier
independent conversion, with a slighly modified version of the upstream page.
https://www.illumos.org/issues/6410
This is primarily intended to ease debugging & testing ZFS when one is only
interested in things like the on-disk location of a specific object's blocks,
but doesn't know their object id. This allows doing things like the following
(FreeBSD-based example):
# zpool create -f foo da0
# dd if=/dev/zero of=/foo/1 bs=1M count=4 >/dev/null 2>&1
# zpool export foo
# zdb -vvvvv -o "ZFS plain file" foo /1
Object lvl iblk dblk dsize lsize %full type
8 2 16K 128K 3.99M 4M 100.00 ZFS plain file (K=inherit) (Z=inherit)
168 bonus System attributes
dnode flags: USED_BYTES USERUSED_ACCOUNTED
dnode maxblkid: 31
path /1
uid 0
gid 0
atime Thu Apr 23 22:45:32 2015
mtime Thu Apr 23 22:45:32 2015
ctime Thu Apr 23 22:45:32 2015
crtime Thu Apr 23 22:45:32 2015
gen 7
mode 100644
size 4194304
parent 4
links 1
pflags 40800000004
Indirect blocks:
0 L1 DVA[0]=<0:c19200:600> DVA[1]=<0:10800019200:600> [L1 ZFS
plain file] fletcher4 lz4 LE contiguous unique double size=4000L/200P birth=7L/
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Will Andrews <will@freebsd.org>
Approved by: Dan McDonald <danmcd@omniti.com>
Author: Yuri Pankov <yuri.pankov@nexenta.com>
MFC after: 3 weeks
illumos/illumos-gate@de05b58863de05b58863https://www.illumos.org/issues/3871
GCC 4.5.3 on Gentoo Linux did not like a few of the changes made in the issue
3604 patch. It printed an error and a couple of warnings:
../../cmd/zdb/zdb.c: In function 'dump_bpobj':
../../cmd/zdb/zdb.c:1257:3: error: 'for' loop initial declarations are only
allowed in C99 mode
../../cmd/zdb/zdb.c:1257:3: note: use option -std=c99 or -std=gnu99 to compile
your code
../../cmd/zdb/zdb.c: In function 'dump_deadlist':
../../cmd/zdb/zdb.c:1323:8: warning: too many arguments for format
../../cmd/zdb/zdb.c:1323:8: warning: too many arguments for format
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Serapheim Dimitropoulos <serapheim@delphix.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Author: Richard Yao <ryao@gentoo.org>
MFC after: 3 weeks
illumos/illumos-gate@64723e361164723e3611https://www.illumos.org/issues/6866
Need this for #6865.
To be generally more scripting-friendly, overload this issue with adding '-q'
option which should skip printing any label information.
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Yuri Pankov <yuri.pankov@nexenta.com>
MFC after: 3 weeks
7280 Allow changing global libzpool variables in zdb and ztest through command line
illumos/illumos-gate@0e60744c980e60744c98https://www.illumos.org/issues/7280
zdb is very handy for diagnosing problems with a pool in a safe and
quick way. When a pool is in a bad shape, we often want to disable some
fail-safes, or adjust some tunables in order to open them. In the
kernel, this is done by changing public variables in mdb. The goal of
this feature is to add the same capability to zdb and ztest, so that
they can change libzpool tuneables from the command line.
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Pavel Zakharov <pavel.zakharov@delphix.com>
MFC after: 3 weeks
illumos/illumos-gate@2840dce1a02840dce1a0https://www.illumos.org/issues/8600
ZFS channel programs should be able to create snapshots.
In addition to the base snapshot functionality, this will likely entail adding
extra logic to handle edge cases which were formerly not possible, such as
creating then destroying a snapshot in the same transaction sync.
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Reviewed by: Brad Lewis <brad.lewis@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Chris Williamson <chris.williamson@delphix.com>
MFC after: 5 weeks
X-MFC after: r324163
illumos/illumos-gate@000cce6b6f000cce6b6fhttps://www.illumos.org/issues/8592
ZFS channel programs should be able to perform a rollback. This logic will
probably look pretty similar to zfs.sync.destroy().
Reviewed by: Chris Williamson <chris.williamson@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Brad Lewis <brad.lewis@delphix.com>
MFC after: 5 weeks
X-MFC after: r324163
illumos/illumos-gate@5f39f884e25f39f884e2https://www.illumos.org/issues/8605
zfs.exists() in channel programs doesn't return any result, and should have a
man page entry.
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Chris Williamson <chris.williamson@delphix.com>
MFC after: 5 weeks
X-MFC after: r324163
7431 ZFS Channel Programs
illumos/illumos-gate@dfc115332cdfc115332chttps://www.illumos.org/issues/7431
ZFS channel programs (ZCP) adds support for performing compound ZFS
administrative actions via Lua scripts in a sandboxed environment (with time
and memory limits).
This initial commit includes both base support for running ZCP scripts, and a
small initial library of API calls which support getting properties and
listing, destroying, and promoting datasets.
Testing: in addition to the included unit tests, channel programs have been in
use at Delphix for several months for batch destroying filesystems. The
dsl_destroy_snaps_nvl() call has also been replaced with
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Approved by: Garrett D'Amore <garrett@damore.org>
Author: Chris Williamson <chris.williamson@delphix.com>
8552 ZFS LUA code uses floating point math
illumos/illumos-gate@916c8d8811916c8d8811https://www.illumos.org/issues/8552
In the LUA interpreter used by "zfs program", the lua format() function
accidentally includes support for '%f' and friends, which can cause compilation
problems when building on platforms that don't support floating-point math in
the kernel (e.g. sparc). Support for '%f' friends (%f %e %E %g %G) should be
removed, since there's no way to supply a floating-point value anyway (all
numbers in ZFS LUA are int64_t's).
Reviewed by: Yuri Pankov <yuripv@gmx.com>
Reviewed by: Igor Kozhukhov <igor@dilos.org>
Approved by: Dan McDonald <danmcd@joyent.com>
Author: Matthew Ahrens <mahrens@delphix.com>
8590 memory leak in dsl_destroy_snapshots_nvl()
illumos/illumos-gate@e6ab4525d1e6ab4525d1https://www.illumos.org/issues/8590
In dsl_destroy_snapshots_nvl(), "snaps_normalized" is not freed after it is
added to "arg".
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: Steve Gonczi <steve.gonczi@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Dan McDonald <danmcd@joyent.com>
Author: Matthew Ahrens <mahrens@delphix.com>
FreeBSD notes:
- zfs-program.8 manual page is taken almost as is from the vendor repository,
no FreeBSD-ification done
- fixed multiple instances of NULL being used where an integer is expected
- replaced ETIME and ECHRNG with ETIMEDOUT and EDOM respectively
This commit adds a modified version of Lua 5.2.4 under
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/lua, mirroring the
upstream. See README.zfs in that directory for the description of Lua
customizations.
See zfs-program.8 on how to use the new feature.
MFC after: 5 weeks
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D12528
FreeBSD notes:
- this MFV reverts FreeBSD commit r314549 to make the merge easier
- at present our emulation of cv_timedwait_hires is rather poor,
so I elected to use cv_timedwait_sbt directly
Please see the differential revision for details.
Unfortunately, I did not get any positive reviews, so there could be
bugs in the FreeBSD-specific piece of the merge.
Hence, the long MFC timeout.
illumos/illumos-gate@1271e4b10d1271e4b10dhttps://www.illumos.org/issues/8585
The current implementation of zil_commit() can introduce significant
latency, beyond what is inherent due to the latency of the underlying
storage. The additional latency comes from two main problems:
1. When there's outstanding ZIL blocks being written (i.e. there's
already a "writer thread" in progress), then any new calls to
zil_commit() will block waiting for the currently oustanding ZIL
blocks to complete. The blocks written for each "writer thread" is
coined a "batch", and there can only ever be a single "batch" being
written at a time. When a batch is being written, any new ZIL
transactions will have to wait for the next batch to be written,
which won't occur until the current batch finishes.
As a result, the underlying storage may not be used as efficiently
as possible. While "new" threads enter zil_commit() and are blocked
waiting for the next batch, it's possible that the underlying
storage isn't fully utilized by the current batch of ZIL blocks. In
that case, it'd be better to allow these new threads to generate
(and issue) a new ZIL block, such that it could be serviced by the
underlying storage concurrently with the other ZIL blocks that are
being serviced.
2. Any call to zil_commit() must wait for all ZIL blocks in its "batch"
to complete, prior to zil_commit() returning. The size of any given
batch is proportional to the number of ZIL transaction in the queue
at the time that the batch starts processing the queue; which
doesn't occur until the previous batch completes. Thus, if there's a
lot of transactions in the queue, the batch could be composed of
many ZIL blocks, and each call to zil_commit() will have to wait for
all of these writes to complete (even if the thread calling
zil_commit() only cared about one of the transactions in the batch).
Reviewed by: Brad Lewis <brad.lewis@delphix.com>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Dan McDonald <danmcd@joyent.com>
Author: Prakash Surya <prakash.surya@delphix.com>
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D12355
illumos/illumos-gate@c861bfbd77c861bfbd77https://www.illumos.org/issues/8567
If fstat64 fails, pread64 fails, or the label is unintelligible,
zpool_read_label will return 0. But if malloc fails, it will return -1. For
consistency, it should always return -1 on failure or 0 on success.
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Alan Somers <asomers@gmail.com>
MFC after: 2 weeks
- The exit probe was not appropriately filtered to only the known pid so it
was firing on any random process that would exit rather the only the one
we cared about.
- The dtest script executes the tst.raise*.exe in the background from
POSIX sh without jobs control. POSIX mandates that SIGINT be set to
SIG_IGN in this case. The test executable never actually tested that
SIGINT could be caught despite trying to block and delay the signal.
So the SIGINT sent from raise() is never actually received since it
is ignored. This could be fixed by calling 'trap - INT' from dtest
before running the executable but I've opted to just use SIGUSR1
instead in these specific tests rather than adding more logic to
test that SIGINT is not ignored at startup.
These 2 issues meant that the tests would randomly work but only if a process
coincidentally exited during the test.
Reviewed by: markj
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
We have D definitions for the named values in socket.h after r323253. Remove
them in test script to prevent compiling failure.
Reviewed by: markj, gnn
Differential Revision: https://reviews.freebsd.org/D12334
illumos/illumos-gate@1702cce7511702cce751
FreeBSD note: rather than merging the zpool.8 update I copied the zpool
scrub section from the illumos zpool.1m to FreeBSD zpool.8 almost
verbatim. Now that the illumos page uses the mdoc format, it was an
easier option. Perhaps the change is not in perfect compliance with the
FreeBSD style, but I think that it is acceptible.
https://www.illumos.org/issues/8414
This issue tracks the port of scrub pause from ZoL: https://github.com/zfsonlinux/zfs/pull/6167
Currently, there is no way to pause a scrub. Pausing may be useful when
the pool is busy with other I/O to preserve bandwidth.
Description
This patch adds the ability to pause and resume scrubbing. This is achieved
by maintaining a persistent on-disk scrub state. While the state is 'paused'
we do not scrub any more blocks. We do however perform regular scan
housekeeping such as freeing async destroyed and deadlist blocks while paused.
Motivation and Context
Scrub pausing can be an I/O intensive operation and people have been asking
for the ability to pause a scrub for a while. This allows one to preserve scrub
progress while freeing up bandwidth for other I/O.
Reviewed by: George Melikov <mail@gmelikov.ru>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Brad Lewis <brad.lewis@delphix.com>
Reviewed by: Serapheim Dimitropoulos <serapheim@delphix.com>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Approved by: Dan McDonald <danmcd@joyent.com>
Author: Alek Pinchuk <apinchuk@datto.com>
MFC after: 2 weeks
illumos/illumos-gate@b7edcb9408b7edcb9408https://www.illumos.org/issues/8378
The problem is that zfs_get_data() supplies a stale zgd_bp to dmu_sync(), which
we then nopwrite against.
zfs_get_data() doesn't hold any DMU-related locks, so after it copies db_blkptr
to zgd_bp, dbuf_write_ready()
could change db_blkptr, and dbuf_write_done() could remove the dirty record.
dmu_sync() then sees the stale
BP and that the dbuf it not dirty, so it is eligible for nop-writing.
The fix is for dmu_sync() to copy db_blkptr to zgd_bp after acquiring the
db_mtx. We could still see a stale
db_blkptr, but if it is stale then the dirty record will still exist and thus
we won't attempt to nopwrite.
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Matthew Ahrens <mahrens@delphix.com>
MFC after: 2 weeks
- Store the symbol table contents in an anonymous swap-backed object. Have
mmap(/dev/ksyms) map that object, and stop mapping the symbol table into
the calling process in ksyms_open(). Previously we would cache a pointer
to the pmap of the opening process, and mmap(/dev/ksyms) would create a
mapping using the physical address found by a pmap lookup at the initial
mapping address. However, this assumes that the cached pmap is valid,
which may not be the case. [1]
- Remove the ksyms ioctl interface. It appears to have been added to work
around a limitation in libelf that no longer exists; see r321842.
Moreover, the interface is difficult to support and isn't present in
illumos. Since ksyms was added specifically to support lockstat(1), it
is expected that this removal won't have any real impact.
- Simplify ksyms_read() to avoid unnecessary copying.
- Don't call the device handle destructor if we fail to capture a snapshot
of the kernel's symbol table. devfs will do that for us.
Reported by: Ilja van Sprundel <ivansprundel@ioactive.com> [1]
Reviewed by: kib (previous revision)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D11789
This test is also timeout on a quiet system because there is nobody triggering
read probefunc while test execution.
Reviewed by: gnn, markj, ngie
Differential Revision: https://reviews.freebsd.org/D11731
In Solaris, basename(1) and basename(3) both return "." while being given an
empty string (""), while in BSD (and Linux) basename(1) returns "" and
basename(3) returns "."
While here, also change #!/usr/bin/ksh to #!/usr/bin/env ksh to find ksh in
$PATH
Reviewed by: gnn, markj (earlier version), ngie (earlier version)
Differential Revision: https://reviews.freebsd.org/D11707
We added too many variable assignments in BEGIN block, which will run out of
default auto-configured variable buffer space. The test VM has 4G RAM which
should be enough for most cases so it's reasonable to increase limitation to
these case.
Reviewed by: gnn
Differential Revision: https://reviews.freebsd.org/D11676
We added too many variable assignments in BEGIN block, which will run out of
default auto-configured variable buffer space. The test VM has 4G RAM which
should be enough for most cases so it's reasonable to increase limitation to
these case.
Reviewed by: gnn, markj, ngie
Differential Revision: https://reviews.freebsd.org/D11674
testing.
This test times-out on a quiet system because there is nobody triggers
syscall::open:entry or syscall::: probe while test execution.
Reviewed by: gnn, markj (earlier version)
Differential Revision: https://reviews.freebsd.org/D11671
This test timeout on a quiet system because there is nobody triggers
'syscall::*wait*:entry' probe while test execution.
Reviewed by: gnn, markj, ngie
Differential Revision: https://reviews.freebsd.org/D11668
illumos/illumos-gate@770499e185770499e185https://www.illumos.org/issues/8021
The ARC buf data project (known simply as "ABD" since its genesis in the ZoL
community) changes the way the ARC allocates `b_pdata` memory from using linear
`void *` buffers to using scatter/gather lists of fixed-size 1KB chunks. This
improves ZFS's performance by helping to defragment the address space occupied
by the ARC, in particular for cases where compressed ARC is enabled. It could
also ease future work to allocate pages directly from `segkpm` for minimal-
overhead memory allocations, bypassing the `kmem` subsystem.
This is essentially the same change as the one which recently landed in ZFS on
Linux, although they made some platform-specific changes while adapting this
work to their codebase:
1. Implemented the equivalent of the `segkpm` suggestion for future work
mentioned above to bypass issues that they've had with the Linux kernel memory
allocator.
2. Changed the internal representation of the ABD's scatter/gather list so it
could be used to pass I/O directly into Linux block device drivers. (This
feature is not available in the illumos block device interface yet.)
FreeBSD notes:
- the actual (default) chunk size is 4KB (despite the text above saying 1KB)
- we can try to reimplement ABDs, so that they are not permanently
mapped into the KVA unless explicitly requested, especially on
platforms with scarce KVA
- we can try to use unmapped I/O and avoid intermediate allocation of a
linear, virtual memory mapped buffer
- we can try to avoid extra data copying by referring to chunks / pages
in the original ABD
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Prashanth Sreenivasa <pks@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: Chris Williamson <chris.williamson@delphix.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
Author: Dan Kimmel <dan.kimmel@delphix.com>
MFC after: 3 weeks
illumos/illumos-gate@79809f9cf479809f9cf4https://www.illumos.org/issues/8269
It seems that currently normalization of stddev aggregation is done
incorrectly.
We divide both the sum of values and the sum of their squares by the
normalization factor. But we should divide the sum of squares by the
normalization factor squared to scale the original values properly.
FreeBSD note: the actual change was committed in r316853, this commit
adds the test files and record merge information.
Reviewed by: Bryan Cantrill <bryan@joyent.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Andriy Gapon <avg@FreeBSD.org>
MFC after: 1 week
Sponsored by: Panzura
illumos/illumos-gate@4dd77f9e384dd77f9e38https://www.illumos.org/issues/7545
When evicting from the ARC, we manipulate some refcount_t's, e.g. arcs_size.
When using zdb to examine a large amount of data (e.g. zdb -bb on a large pool
with small blocks), the ARC may have a large number of entries. If reference
tracking is enabled, there will be ~1 reference for each block in the ARC. When
evicting, we decrement the refcount and have to search all the references to
find the one that we are removing, which is very slow.
Since zdb is typically used to find problems with the on-disk format, and not
with the code it is running, we should disable reference tracking in zdb.
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Steve Gonczi <steve.gonczi@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Matthew Ahrens <mahrens@delphix.com>
MFC after: 2 weeks
7252 7628 compressed zfs send / receive
illumos/illumos-gate@5602294fda5602294fdahttps://www.illumos.org/issues/7252
This feature includes code to allow a system with compressed ARC enabled to
send data in its compressed form straight out of the ARC, and receive data in
its compressed form directly into the ARC.
https://www.illumos.org/issues/7628
We should have longer, more readable versions of the ZFS send / recv options.
7628 create long versions of ZFS send / receive options
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: Sebastien Roy <sebastien.roy@delphix.com>
Reviewed by: David Quigley <dpquigl@davequigley.com>
Reviewed by: Thomas Caputi <tcaputi@datto.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Author: Dan Kimmel <dan.kimmel@delphix.com>
7386 zfs get does not work properly with bookmarks
illumos/illumos-gate@edb901aab9edb901aab9https://www.illumos.org/issues/7386
The zfs get command does not work with the bookmark parameter while it works
properly with both filesystem and snapshot:
# zfs get -t all -r creation rpool/test
NAME PROPERTY VALUE SOURCE
rpool/test creation Fri Sep 16 15:00 2016 -
rpool/test@snap creation Fri Sep 16 15:00 2016 -
rpool/test#bkmark creation Fri Sep 16 15:00 2016 -
# zfs get -t all -r creation rpool/test@snap
NAME PROPERTY VALUE SOURCE
rpool/test@snap creation Fri Sep 16 15:00 2016 -
# zfs get -t all -r creation rpool/test#bkmark
cannot open 'rpool/test#bkmark': invalid dataset name
#
The zfs get command should be modified to work properly with bookmarks too.
Reviewed by: Simon Klinkert <simon.klinkert@gmail.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Approved by: Matthew Ahrens <mahrens@delphix.com>
Author: Marcel Telka <marcel@telka.sk>
illumos/illumos-gate@8363e80ae7https://github.com/illumos/illumos-gate/commit/8363e80ae72609660f6090766ca8c2c18https://www.illumos.org/issues/7303
This change introduces a new weighting algorithm to improve metaslab selection.
The new weighting algorithm relies on the SPACEMAP_HISTOGRAM feature. As a result,
the metaslab weight now encodes the type of weighting algorithm used
(size-based vs segment-based).
This also introduce a new allocation tracing facility and two new dcmds to help
debug allocation problems. Each zio now contains a zio_alloc_list_t structure
that is populated as the zio goes through the allocations stage. Here's an
example of how to use the tracing facility:
> c5ec000::print zio_t io_alloc_list | ::walk list | ::metaslab_trace
MSID DVA ASIZE WEIGHT RESULT VDEV
- 0 400 0 NOT_ALLOCATABLE ztest.0a
- 0 400 0 NOT_ALLOCATABLE ztest.0a
- 0 400 0 ENOSPC ztest.0a
- 0 200 0 NOT_ALLOCATABLE ztest.0a
- 0 200 0 NOT_ALLOCATABLE ztest.0a
- 0 200 0 ENOSPC ztest.0a
1 0 400 1 x 8M 17b1a00 ztest.0a
> 1ff2400::print zio_t io_alloc_list | ::walk list | ::metaslab_trace
MSID DVA ASIZE WEIGHT RESULT VDEV
- 0 200 0 NOT_ALLOCATABLE mirror-2
- 0 200 0 NOT_ALLOCATABLE mirror-0
1 0 200 1 x 4M 112ae00 mirror-1
- 1 200 0 NOT_ALLOCATABLE mirror-2
- 1 200 0 NOT_ALLOCATABLE mirror-0
1 1 200 1 x 4M 112b000 mirror-1
- 2 200 0 NOT_ALLOCATABLE mirror-2
If the metaslab is using segment-based weighting then the WEIGHT column will
display the number of segments available in the bucket where the allocation
attempt was made.
Author: George Wilson <george.wilson@delphix.com>
Reviewed by: Alex Reece <alex@delphix.com>
Reviewed by: Chris Siden <christopher.siden@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Paul Dagnelie <paul.dagnelie@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Don Brady <don.brady@intel.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
due to zl_itx_list_sz not updated when async itx'es upgraded to sync.
Actually because of other changes about that time zl_itx_list_sz is not
really required to implement the functionality, so this patch removes
some unneeded broken code and variables.
Original idea of zil_slog_limit was to reduce chance of SLOG abuse by
single heavy logger, that increased latency for other (more latency critical)
loggers, by pushing heavy log out into the main pool instead of SLOG. Beside
huge latency increase for heavy writers, this implementation caused double
write of all data, since the log records were explicitly prepared for SLOG.
Since we now have I/O scheduler, I've found it can be much more efficient
to reduce priority of heavy logger SLOG writes from ZIO_PRIORITY_SYNC_WRITE
to ZIO_PRIORITY_ASYNC_WRITE, while still leave them on SLOG.
Existing ZIL implementation had problem with space efficiency when it
has to write large chunks of data into log blocks of limited size. In some
cases efficiency stopped to almost as low as 50%. In case of ZIL stored on
spinning rust, that also reduced log write speed in half, since head had to
uselessly fly over allocated but not written areas. This change improves
the situation by offloading problematic operations from z*_log_write() to
zil_lwb_commit(), which knows real situation of log blocks allocation and
can split large requests into pieces much more efficiently. Also as side
effect it removes one of two data copy operations done by ZIL code WR_COPIED
case.
While there, untangle and unify code of z*_log_write() functions.
Also zfs_log_write() alike to zvol_log_write() can now handle writes crossing
block boundary, that may also improve efficiency if ZPL is made to do that.
Sponsored by: iXsystems, Inc.
The untyped probe arguments have a width larger than int on such platforms,
so printing their value without a cast can give unexpected results.
MFC after: 1 week
illumos/illumos-gate@f9eb9fdf19https://github.com/illumos/illumos-gate/commit/f9eb9fdf196b6ed476e4ffc69cecd8b0d
a3cb7e7
https://www.illumos.org/issues/6451
Sometimes ztest fails because zdb detects checksum errors. e.g.:
Traversing all blocks to verify checksums and verify nothing leaked ...
zdb_blkptr_cb: Got error 50 reading <71, 47, 0, 8000160> DVA0=<0:1cc2000:
180000> [L0 other uint64[]] sha256 uncompressed LE contiguou
s unique single size=100000L/100000P birth=271L/271P fill=1
cksum=c5a3e27d1ed0f894:843bca3a5473c4bf:f76a19b6830a2e4:91292591613a12bf --
skipping
zdb_blkptr_cb: Got error 50 reading <71, 47, 0, 800000180> DVA0=<0:ce16800:
180000> [L0 other uint64[]] sha256 uncompressed LE contigu
ous unique single size=100000L/100000P birth=840L/840P fill=1
cksum=5d018f3d061e17f3:6d1584784587bf63:2805a74a0ce37369:ba68a214806c7e75
-- skipping
zdb_blkptr_cb: Got error 50 reading <71, 47, 0, 1000000360> DVA0=<0:10d37400:
180000> [L0 other uint64[]] sha256 uncompressed LE conti
guous unique single size=100000L/100000P birth=904L/904P fill=1
cksum=fa1e11d4138bd14b:86c9488c444473e3:f31e43c72e72e46b:e3446472d1174d
ba -- skipping
zdb_blkptr_cb: Got error 50 reading <71, 47, 0, 400000002c0> DVA0=<0:127ef400:
180000> [L0 other uint64[]] sha256 uncompressed LE cont
iguous dedup single size=100000L/100000P birth=549L/549P fill=1
cksum=30e14955ebf13522:66dc2ff8067e6810:4607e750abb9d3b3:6582b8af909fcb
58 -- skipping
zdb_blkptr_cb: Got error 50 reading <657, 5, 0, 1c0> DVA0=<0:1a180400:180000>
[L0 other uint64[]] fletcher4 uncompressed LE contiguou
s unique single size=100000L/100000P birth=1091L/1091P fill=1 cksum=a6cf1e50:
29b3bd01c57e5:36779b914035db9a:db61cdcf6bec56f0 -- skippin
g
The problem is that ztest_fault_inject() can inject multiple faults into the
same block. It is designed such that it can inject errors on all leafs of a
RAID-Z or mirror, but for a given range of offsets, it will only inject errors
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Jorgen Lundman <lundman@lundman.net>
Approved by: Dan McDonald <danmcd@omniti.com>
Author: Matthew Ahrens <mahrens@delphix.com>
7147 ztest: ztest_ddt_repair fails with ztest_pattern_match assertion
illumos/illumos-gate@aab8072633https://github.com/illumos/illumos-gate/commit/aab80726335c76a7cae32c7300890248d
73a51e3
https://www.illumos.org/issues/7147
Here's the dbuf we're currently reading:
966f200::dbuf
addr object lvl blkid holds os
966f200 4 0 0 1 ztest/ds_3
966f200::print dmu_buf_t db_data
db_data = 0x9ae0400
0x9ae0400/10J
0x9ae0400: c1c7ced932020d c1c7ced932020d c1c7ced932020d c1c7ced932020d
c1c7ced932020d c1c7ced932020d c1c7ced932020d c1c7ced932020d
c1c7ced932020d c1c7ced932020d
The pattern we're expecting is actually this: a34ae10b5f2db2. If we attempt to
read the block on disk we find that it has matches what ztest_ddt_repair()
would have written:
~c1c7ced932020d=J
ff3e383126cdfdf2
966f200::print dmu_buf_impl_t db_blkptr | ::blkptr
DVA0=<0:71d3c00:800>
[L0 UINT64_OTHER] SHA256 OFF LE contiguous dedup single
size=400L/400P birth=55L/55P fill=1
cksum=18486450d3ce8c6d:75a72f4bbf117b0f:2d3a226314eb5650:2eb0fd68648b1af0
1. zdb -U /rpool/tmp/zpool.cache -R ztest 0:71d3c00:800 | head
Found vdev type: mirror
0:71d3c00:800
0 1 2 3 4 5 6 7 8 9 a b c d e f 0123456789abcdef
000000: ff3e383126cdfdf2 ff3e383126cdfdf2 ...&18>....&18>.
000010: ff3e383126cdfdf2 ff3e383126cdfdf2 ...&18>....&18>.
000020: ff3e383126cdfdf2 ff3e383126cdfdf2 ...&18>....&18>.
000030: ff3e383126cdfdf2 ff3e383126cdfdf2 ...&18>....&18>.
000040: ff3e383126cdfdf2 ff3e383126cdfdf2 ...&18>....&18>.
000050: ff3e383126cdfdf2 ff3e383126cdfdf2 ...&18>....&18>.
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: George Wilson <george.wilson@delphix.com>
illumos/illumos-gate@dcbf3bd6a1dcbf3bd6a1https://www.illumos.org/issues/6950
When reading compressed data from disk, the ARC should keep the compressed
block cached and only decompress it when consumers access the block. The
uncompressed data should be short-lived allowing the ARC to cache a much larger
amount of data. The DMU would also maintain a smaller cache of uncompressed
blocks to minimize the impact of decompressing frequently accessed blocks.
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Don Brady <don.brady@intel.com>
Reviewed by: Richard Elling <Richard.Elling@RichardElling.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
Author: George Wilson <george.wilson@delphix.com>
illumos/illumos-gate@9adfa60d48https://github.com/illumos/illumos-gate/commit/9adfa60d484ce2435f5af77cc99dcd4e6
92b6660
https://www.illumos.org/issues/6314
Callers of dsl_dataset_name pass a buffer of size ZFS_MAXNAMELEN, but
dsl_dataset_name copies the datasets' name PLUS the snapshot name to it,
resulting in a max of 2 * ZFS_MAXNAMELEN + '@'.
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Igor Kozhukhov <ikozhukhov@gmail.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Author: Matthew Ahrens <mahrens@delphix.com>
illumos/illumos-gate@8808ac5daehttps://github.com/illumos/illumos-gate/commit/8808ac5dae118369991f158b6ab736cb2
691ecde
https://www.illumos.org/issues/4521
zfstest is trying to execute evil "zfs unmount -a", which fails (fortunately,
as it would otherwise leave me with my ~ missing):
03:44:11.86 cannot unmount '/export/home/yuri': Device busy cannot unmount '/
export/home': Device busy
03:44:11.86 ERROR: /usr/sbin/zfs unmount -a exited 1
This affects, at least, zfs_mount_009_neg and zfs_mount_all_001_pos, both
failing on that step. The pool containing the /export/home hierarchy is
included in KEEP variable, but it doesn't seem to affect anything here.
Reviewed by: Andriy Gapon <avg@FreeBSD.org>
Reviewed by: Dan McDonald <danmcd@omniti.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Yuri Pankov <yuri.pankov@nexenta.com>
6902 speed up listing of snapshots if requesting name only and sorting by name
This was our change from the beginning, so just reduce the upstream diff.
Have it print the contents of aggregations, if any. Otherwise, one needs to
kill the running script to view the collected data, or add code to
periodically print it.
Discussed with: gnn
MFC after: 1 month
7085 add support for "if" and "else" statements in dtrace
illumos/illumos-gate@c3bd3abd88
Add syntactic sugar to dtrace: "if" and "else" statements. The sugar is
baked down to standard dtrace features by adding additional clauses with
the appropriate predicates.
Reviewed by: Adam Leventhal <ahl@delphix.com>
Reviewed by: Sebastien Roy <sebastien.roy@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Bryan Cantrill <bryan@joyent.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
Author: Matthew Ahrens <mahrens@delphix.com>
MFC after: 2 weeks
Relnotes: yes
Note: conversion of the manual page change from roff to mdoc is mine.
illumos/illumos-gate@b702644a6eb702644a6ehttps://www.illumos.org/issues/7164
If the pool/dataset command-line argument is specified with a trailing
slash, for example, "tank/", we should interpret it as the topmost
dataset (rather than the whole pool)
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Tim Chase <tim@chase2k.com>
PR: 204661
MFC after: 1 week
Relnotes: yes
illumos/illumos-gate@ae24175b2bae24175b2bhttps://www.illumos.org/issues/6391
When using zdb with non-default SPA config file it is not convenient
to add -U <non-default-config-file-path> all the time. This commit
introduces support for setting/overriding SPA config location via
environment variable 'SPA_CONFIG_PATH'.
If -U flag is specified in the command line it will override any other
value as usual.
64d7b6cf75
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Richard Yao <ryao@gentoo.org>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Will Andrews <will@freebsd.org>
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Cyril Plisko <cyril.plisko@mountall.com>
MFC after: 1 week
This allows one to enable DTrace probes relatively early during boot,
during SI_SUB_DTRACE_ANON, before dtrace(1) can invoked. The desired
enabling is created using dtrace -A, which writes a /boot/dtrace.dof
file and uses nextboot(8) to ensure that DTrace kernel modules are loaded
and that the DOF file describing the enabling is loaded by loader(8)
during the subsequent boot. The trace output can then be fetched with
dtrace -a.
With this commit, boot-time DTrace is only functional on i386 and amd64: on
other architectures, the high-resolution timer frequency is initialized
during SI_SUB_CLOCKS and is thus not available when the anonymous
tracing state is initialized. On x86, the TSC is used and is thus available
earlier.
MFC after: 1 month
Relnotes: yes
Reviewed by: Yuri Pankov <yuri.pankov@nexenta.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Author: Will Andrews <will@firepipe.net>
Closes#83Closes#32openzfs/openzfs@9663688425
FreeBSD already had `zpool labelclear` functionality, so this is mostly
just a diff reduction.
MFC after: 1 month
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Andy Stormont <astormont@racktopsystems.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Author: Igor Kozhukhov <ikozhukhov@gmail.com>
illumos/illumos-gate@c16bcc4577
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Author: Prakash Surya <prakash.surya@delphix.com>
illumos/illumos-gate@97e8130957
Currently, zfs(8) and zpool(8) print "invalid type '(null)'" or similar
messages, if you pass in invalid types, sources or column names for "zfs
get", "zfs list" and "zpool get". This is because the commands use
getsubopt(3), and in case of failure, they print 'value', which is NULL
when sub options don't match.
They should print 'suboptarg' instead, which is the documented way to
get at the non-matching sub option value.
Reviewed by: smh
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D5365
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Richard Elling <Richard.Elling@RichardElling.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Author: Paul Dagnelie <pcd@delphix.com>
illumos/illumos-gate@68ecb2ec93
This allows to do a full (non-incremental send) and receive it as a clone
of an existing dataset. It can leverage nopwrite to share blocks with the
origin. This can be used to change the relationship of datasets on the
target. For example, maybe on the source you have:
A ---- B ---- C
And you have sent to the target a full of B, and the incremental B->C:
B ---- C
You later realize that you want to have A on the target. You will have to
do a full send of A, but nopwrite can save you space on the target if you
receive it as a clone of B, assuming that A and B have some blocks inxi
common:
B ---- C
\
A
If the zfs module is not present and not loadable, report an error
to the user instead of crashing
Reviewed by: mahrens
Sponsored by: Gandi.net
Differential Revision: https://reviews.freebsd.org/D4691
Fix zfs(8) not formatting due to wrong macro (Oc) in the syntax for the new
zfs set multiple dataset properties option.
PR: 204631
Submitted by: Thomas Eberhardt
Sponsored by: Multiplay
Previously, the parameters of 'zfs holds' could only be snapshots
Add -d <depth> flag to limit depth of recursion
Add -p flag to print literal values, rather than interpreted values
Add -H flag to suppress header output and use tabs rather than whitespace
Reviewed by: mahrens, smh, dteske
Approved by: bapt (mentor)
MFC after: 3 weeks
Relnotes: yes
Sponsored by: ScaleEngine Inc.
Differential Revision: https://reviews.freebsd.org/D3994
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Approved by: Gordon Ross <gwr@nexenta.com>
Author: John Wren Kennedy <john.kennedy@delphix.com>
illumos/illumos-gate@52244c0958
In fact, only unrelated part of that commit is applicable:
8. zpool list -v doesn't print spares
It also doesn't correctly identify log devices.
updated for large block support.
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Joe Stein <joe.stein@delphix.com>
illumos/illumos-gate@e9316f7696
to illumos-gate 13967:92bec6d87f59
Illumos ZFS issues:
3557 dumpvp_size is not updated correctly when a dump zvol's size is
changed
3558 setting the volsize on a dump device does not return back ENOSPC
3559 setting a volsize larger than the space available sometimes succeeds
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: George Wilson <george@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Bayard Bell <buffer.g.overflow@gmail.com>
Reviewed by: Richard PALO <richard@NetBSD.org>
Reviewed by: Steven Hartland <killing@multiplay.co.uk>
Approved by: Rich Lowe <richlowe@richlowe.net>
Author: Chris Williamson <chris.williamson@delphix.com>
illumos/illumos-gate@30925561c2
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Richard Elling <Richard.Elling@RichardElling.com>
Reviewed by: Xin Li <delphij@freebsd.org>
Reviewed by: Arne Jansen <sensille@gmx.net>
Approved by: Dan McDonald <danmcd@omniti.com>
Author: Matthew Ahrens <mahrens@delphix.com>
illumos/illumos-gate@9c3fd1216f
For more info, see:
- slides http://www.slideshare.net/MatthewAhrens/openzfs-send-and-receive
- video https://www.youtube.com/watch?v=iY44jPMvxog
- manpage changes (for zfs resume -s and zfs send -t)
- upcoming talk at the OpenZFS Developer Summit
The TL;DR is:
Use "zfs receive -s" to save the partially received state on failure.
On failure, get the receive token with "zfs get receive_resume_token <fs>"
Resume the send with "zfs send -t <token_value>"
Relnotes: yes
Previously, lockstat(1) would use a lock's address as its identifier when
consuming data describing lock contention and hold events. After collecting
the requested data, it would use ksyms(4) to resolve lock addresses to
names. Of course, this doesn't work too well for locks contained in
dynamically-allocated memory. This change modifies lockstat(1) to trace the
lock names obtained from the base struct lock_object instead, leading to
output that is generally much more useful.
This change also removes the -c option, which is used to coalesce data for
locks in an array. It's not possible to support this option without also
tracing lock addresses, and since lock arrays in which the lock names are
distinct are not very common in FreeBSD, it's simpler to just remove the
option.
Reviewed by: avg (earlier revision)
Differential Revision: https://reviews.freebsd.org/D3661
(userland portion that was not merged in r286677)
Update zdb to also print ltime, type, and level information
for these new style holes. Previously, only the logical birth
time would be printed.
Reviewed by: Toomas Soome <tsoome@me.com>
Reviewed by: George Wilson <george@delphix.com>
Reviewed by: Alex Reece <alex@delphix.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
Author: Matthew Ahrens <mahrens@delphix.com>
illumos/illumos-gate@ca0cc3918a
A ZFS feature flags (large blocks) tracks its refcounts as the number of
datasets that have ever used the feature. Several features of this type
are planned to be added (new checksum functions). This code should be made
common infrastructure rather than duplicating the code for each feature.
5925 zfs receive -o origin=
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Author: Paul Dagnelie <pcd@delphix.com>
While running 'zfs recv' we noticed that every 128th 8K block required a
read. We were seeing that restore_write() was calling dmu_tx_hold_write()
and the indirect block was not cached. We should prefetch upcoming indirect
blocks to avoid having to go to disk and blocking the restore_write().
Allow an incremental send stream to be received as a clone, even if the
stream does not mark it as a clone.
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Alex Reece <alex@delphix.com>
Reviewed by: George Wilson <george@delphix.com>
Reviewed by: Will Andrews <will@freebsd.org>
Reviewed by: Simon Klinkert <simon.klinkert@gmail.com>
Approved by: Gordon Ross <gwr@nexenta.com>
Author: Matthew Ahrens <mahrens@delphix.com>
illumos/illumos-gate@732885fca0
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Bayard Bell <buffer.g.overflow@gmail.com>
Approved by: Albert Lee <trisk@omniti.com>
Author: Matthew Ahrens <mahrens@delphix.com>
illumos/illumos-gate@98110f08fa
5661 ZFS: "compression = on" should use lz4 if feature is enabled
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Josef 'Jeff' Sipek <jeffpc@josefsipek.net>
Reviewed by: Xin LI <delphij@freebsd.org>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Justin T. Gibbs <justing@spectralogic.com>
illumos/illumos-gate@db1741f555