Now that we return an allocated zfs_devdesc, we have to free it. These
frees were missing from the error cases. In addition, simplify the code
a bit for the out of memory case.
Sponsored by: Netflix
Reviewed by: kevans
Differential Revision: https://reviews.freebsd.org/D38006
zfs lives in libsa. However, it depends on nvstore (and other things)
that are in common. Fix part of this layering violation by splitting
nvstore into a libsa piece (which is the base implementation) and
keeping a much smaller common piece (to implement the nvstore
command). This just leaves zfs' knowledge of device names that's
specific to common and its calling platform specific init code to
resolve. Add a nvstore.h file for these two parts to communicate private
things and move the public nvstore api from bootstrap.h to stand.h.
Sponsored by: Netflix
Reviewed by: tsoome, kevans
Differential Revision: https://reviews.freebsd.org/D38043
Since dev_cleanup() walks through all the devsw devices with dv_cleanup
rotuines, move it into libsa rather than having it in
'common'. Logically, it operates only on things that are in libsa, and
would never be different for different loaders: either people would call
it as is, or they'd do the loop themselves with 'special' things inline
between calls to cleanup (not that I think that will ever be needed
though).
Sponsored by: Netflix
Reviewed by: kevans
Differential Revision: https://reviews.freebsd.org/D38004
Pass in 'true' if you'd like to search this device's partitions or
'false' if you should just search the device. EFI and (in the future)
kboot have discrete partitions that aren't accessed via the full disk
device. Weird things happen if you try to search in these cases.
Sponsored by: Netflix
Allow stand.h to be included in C++ programs. This is little more than
using our stylized __BEGIN_DECL / __END_DECL around the entire
file. There's no run-time support for C++, so the C++ that can be used
is quite limited. It is enough for libunwind, though.
Sponsored by: Netflix
Reviewed by: jrtc27, kevans
Differential Revision: https://reviews.freebsd.org/D37946
libunwind files need inttype.h. It's safe so add it to the safe list.
Sponsored by: Netflix
Reviewed by: jrtc27, kevans
Differential Revision: https://reviews.freebsd.org/D37947
It typically had two args with an optional third from the userland
declaration in sys/ioccom.h. However, the funciton definition used a
non-optional char * argument. This mismatch is UB behavior (but worked
due to the calling convetions of all our machines).
Instead, add a declaration for ioctl to stand.h, make the third arg
'void *' which is a better match to the ... declaration before. This
prevents the convert int * -> char * errors as well. Make the ioctl
user-space declaration truly user-space specific (omit it in the
stand-alone build).
No functional change intended.
Sponsored by: Netflix
Reviewed by: emaste
Differential Revision: https://reviews.freebsd.org/D37680
The zlib project has issue https://github.com/madler/zlib/issues/633 to
document its continued use of old K&R-style function definitions.
Suggested by: delphij@
Sponsored by: Netflix
GCC 12 warns about a dangling pointer to 'objid' in
zfs_bootenv_initial(). However, this appears to be a false positive
as the pointer to 'objid' is only passed to zfs_lookup_dataset() but
not saved anywhere that outlives the lifetime of the
zfs_bootenv_initial() function.
Reviewed by: imp, emaste
Differential Revision: https://reviews.freebsd.org/D37533
On OpenFirmware, and possibly kboot, we use full path names for the
objects that are the 'device'. kboot uses a hack of knowing that all
disk device nodes start with '/dev', but this generalizes it for
OpenFirmware where both 'block' and 'network' devices live in the same
namespace and one must ask the OF node its type to know if this device
type matches.
For drivers that don't specify, the current convention of using
strncmp() is retained. This is done only in devparse(), but everything
uses it directly (or will soon).
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D37554
To support more flexible device matching, we now pass in the full
devspec to the parsedev routines. For everything execpt uboot, this is
just a drop in (since everything except uboot and openfirmware always
uses disk...: and/or zfs:, but openfirmware isn't really affected).
uboot we kludge around it by subtracting 4 from where the rest of the
device name starts. This is unforunate, and can compute the address one
before the string. But we never dereference that address. uboot needs
more work, and this is an acceptable UB until that other work happens.
OFW doesn't really use the parsedev routines these days (since none of
the supported device uses this... yet). It too needs more work, but it
needs device matching support first.
Sponsored by: Netflix
Reviewed by: delphij
Differential Revision: https://reviews.freebsd.org/D37553
devinit() marches through all the devices, calling the inint routines if
any exist. Replace all the identical copies of this code.
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D37349
We no longer need the zfs stubs since we're no longer referencing these
functions outside of zfs.c.
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D37345
devparse is now the preferred interface to use to parse device
strings or device:/path strings. It parses the passed in string,
mallocs the device's particular devdesc string and returns the
'remainder' of the device:/path for further processing.
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D37338
Allow device classes to define a parsing routine. Most device classes
already have these routines, but there's much duplication in their
use. Define an interface for a common routine to parse an individual
device. By convetion, files have the form "[device:]/path/to/file"
where device is optional (filled in to be the value of currdev)
and it starts with the dv_name field of the device, with the rest
of the name up to the device (typically a unit number, but disks
add partition inforation, and other devices may do artibtrary
otehr things).
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D37337
Change the first argument to zfs_parsedev() to be a pointer to a struct
devdesc *. This now gets filled in with a malloc'd structure that's
returned to the caller that the caller is repsonsible for freeing. Most
nplaces in the tree passed in a malloc'd pointer anyway, and this moves
knowledge of zfs_devdesc more firmly into the zfs.c code.
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D37336
So add ${NO_WDEPRECATED_NON_PROTOTYPE} to the CFLAGS of those
files. This can be removed when we import a zlib that's free of this
anachronism.
Sponsored by: Netflix
Reviewed by: jhb
Differential Revision: https://reviews.freebsd.org/D37516
If the DIOCGMEDIASIZE ioctl fails, assume the disk doesn't have geli
encryption. While all disks should implement this, fail safe for disks /
partitions that do not.
Sponsored by: Netflix
Follow the convention with *_DEBUG macros in stand/libsa/* and replace
"#if" with "#ifdef".
Reviewed by: kd
Obtained from: Semihalf
Differential Revision: https://reviews.freebsd.org/D36740
Change the casted type and printf format string to avoid compilation
failure when RARP_DEBUG macro is defined.
Reviewed by: imp
Obtained from: Semihalf
Differential Revision: https://reviews.freebsd.org/D36738
Notable upstream pull request merges:
#13725 Fix BLAKE3 tuneable and module loading on Linux and FreeBSD
#13756 FreeBSD: Organize sysctls
#13773 FreeBSD: add kqfilter support for zvol cdev
#13781 Importing from cachefile can trip assertion
#13794 Apply arc_shrink_shift to ARC above arc_c_min
#13798 Improve too large physical ashift handling
#13799 Revert "Avoid panic with recordsize > 128k, raw sending and
no large_blocks"
#13802 Add zfs.sync.snapshot_rename
#13831 zfs_enter rework
#13855 zfs recv hangs if max recordsize is less than received
recordsize
Obtained from: OpenZFS
OpenZFS commit: c629f0bf62
This corrects an issue introduced in b4cb3fe0e3, where a freshly
allocated `DOS_FS` structure would not be initialized properly before
use in `dos_open`.
In case of FAT32 file systems, this would leave `fs->dirents`
uninitialized and - depending on its content and due to checks in
`parsebs` - prevent mounting the file system successfully.
This particularily impacted the EFI loader, as it was sometimes not
able to read files from a FAT32-formatted EFI partition, including
LoaderEnv (`/efi/freebsd/loader.env`).
Accepted by: imp
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D36482
Add a smbios.bios.revision kenv, which contains the system BIOS revision
as defined in SMBIOS specification, section 3.3.1.
Since the revision is stored in two separate byte fields,
the smbios_setenv helper can't be used.
Read and construct the kenv manually instead.
Approved by: mw(mentor)
Sponsored by: Stormshield
Obtained from: Semihalf
Differential Revision: https://reviews.freebsd.org/D36413
The boot loader should look in the standard places for the UFS
superblock, but not go too far into the speculative realm. Supress
errors about hash being invalid, which will allow us to boot, even when
the superblock looks good, but fails the hash test. This defers any
policy decisions about booting and/or recovery to userland. This also
has the side effect of eliminating some rather spammy messages when UFS
searches devices with filesystems that are not UFS...
Sponsored by: Netflix
Reviewed by: mckusick
Differential Revision: https://reviews.freebsd.org/D36253
into ffs_sbsearch() to allow use by other parts of the system.
Historically only fsck_ffs(8), the UFS filesystem checker, had code
to track down and use alternate UFS superblocks. Since fsdb(8) used
much of the fsck_ffs(8) implementation it had some ability to track
down alternate superblocks.
This change extracts the code to track down alternate superblocks
from fsck_ffs(8) and puts it into a new function ffs_sbsearch() in
sys/ufs/ffs/ffs_subr.c. Like ffs_sbget() and ffs_sbput() also found
in ffs_subr.c, these functions can be used directly by the kernel
subsystems. Additionally they are exported to the UFS library,
libufs(8) so that they can be used by user-level programs. The new
functions added to libufs(8) are sbfind(3) that is an alternative
to sbread(3) and sbsearch(3) that is an alternative to sbget(3).
See their manual pages for further details.
The utilities that have been changed to search for superblocks are
dumpfs(8), fsdb(8), ffsinfo(8), and fsck_ffs(8). Also, the prtblknos(8)
tool found in tools/diag/prtblknos searches for superblocks.
The UFS specific mount code uses the superblock search interface
when mounting the root filesystem and when the administrator doing
a mount(8) command specifies the force flag (-f). The standalone UFS
boot code (found in stand/libsa/ufs.c) uses the superblock search
code in the hope of being able to get the system up and running so
that fsck_ffs(8) can be used to get the filesystem cleaned up.
The following utilities have not been changed to search for
superblocks: clri(8), tunefs(8), snapinfo(8), fstyp(8), quot(8),
dump(8), fsirand(8), growfs(8), quotacheck(8), gjournal(8), and
glabel(8). When these utilities fail, they do report the cause of
the failure. The one exception is the tasting code used to try and
figure what a given disk contains. The tasting code will remain
silent so as not to put out a slew of messages as it trying to taste
every new mass storage device that shows up.
Reviewed by: kib
Reviewed by: Warner Losh
Tested by: Peter Holm
Differential Revision: https://reviews.freebsd.org/D36053
Sponsored by: The FreeBSD Foundation
We don't need the compress rotuines, nor zstd_opt.c. Remove them.
Expand the number of places we omit code for IN_LIBSA (which are FreeBSD
specific). Due to the agressive optimization, though, this doesn't
reduce the size of the loader. It does reduce the number of 'false
positives' for places to omit to reduce the size as well as reducing the
build time slightly.
Sponsored by: Netflix
Reviewed by: tsoome, delphij
Differential Revision: https://reviews.freebsd.org/D36145
The BIOS loader operates in a very constrained environment. The messages
for the super block integrity tests take up about 12k of space. Compile
them out for the BIOS loader, while leaving it intact for all other
loaders that aren't space constrained. These aren't used in the 'super
tiny' *boot* programs, so no adjustment is needed there.
We reply on the fact that (a) i386 doesn't support 32-bit UEFI booting
and (b) LIBSA_CPUARCH is "i386" when building on both i386 and when
we're building the 32-bit libsa32 library.
This saves about 12k of space for this constrained envrionment and will
take a bit of the pressure off some machines where the loader has grown
too big for their BIOS (see comments in i386/loader/Makefile for
details).
Sponsored by: Netflix
Reviewed by: mckusick
Differential Revision: https://reviews.freebsd.org/D36175
Add a generic way to get the string representation of a zfs device / mount.
Sponsored by: Netflix
Reviewed by: tsoome (prior version)
Differential Revision: https://reviews.freebsd.org/D35923
Use devformat instead of disk_devfmt. This allows us to avoid knowing
the details of the device that's underneath us. Remove disk.h include
and the -I${LDRSRC} from the build of ufs.c since they are no longer
needed.
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D35922
Fix layering violation and use devformat to get the string
representation of the device to see if we're mounted yet or not. Remove
added include to pickup disk.h.
Sponsored by: Netflix
Reviewed by: tsoome (prior version)
Differential Revision: https://reviews.freebsd.org/D35919
All of the archsw fmtdev functions treat DEVT_DISK as a call to
disk_fmtdev. Set all disks' dv_fmtdev to disk_fmtdev so devformat
will return the same thing.
Sponsored by: Netflix
Reviewed by: tsoome (prior version)
Differential Revision: https://reviews.freebsd.org/D35917
Use dv_fmtdev to return a formatted string for a device. If this is a
null pointer, return the device name and unit followed by a colon (eg
disk3:).
Sponsored by: Netflix
Reviewed by: tsoome (prior version)
Differential Revision: https://reviews.freebsd.org/D35916
Add a new pointer, dv_devfmt, to allow devices to format themselves. We
will use this to simplify many of the fmtdev functions in the tree as
they are all almost the same, or all are isomorphic to each other.
Sponsored by: Netflix
Reviewed by: tsoome (prior version)
Differential Revision: https://reviews.freebsd.org/D35915
We do a number of games with ploymorphism for different types struct
*devdesc. Adjust one place that this affects to take the address of the
base class (most others have void * at the moment). This is more type
safe than a bare void *.
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D35914
geliboot.c and geliboot_crypto.c don't need anything from stand/common,
so remove them from the list of things to add it.
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D35921
