1) Make the driver "quiet" by sticking most boot messages behind
bootverbose conditionals. This means that you won't see the
sync and wide negotiation, but you will find out if they fail.
2) Add support to the 93cx6 serial eeprom code to read at an abitrary
offset. This is needed so that we can access the second half
of the eeprom on 3940 cards where the second channel's config
is stored.
3) Add flags argument to ahcprobe(). This is used by the pci probe code
to tell the generic driver that an adapter should be treated
as a channel B device as well as notify it of the presence of
external SCB SRAM. These are needed for some motherboard
implementations of the aic7870 and for the 3940 controllers.
4) Print "Channel A"/"Channel B" instead of "Single Channel" for the
two busses of the 3940. I received many reports of confusion
about how the 3940 was probed since most people belived that
only one ahc entry was needed. This will hopefully make it
clearer.
5) Walk the SCBs to determine just how many their are if external SCB
ram is detected.
6) Hard code that external SCB ram is present for the 3940 since it doesn't
use the documented reporting facility for reporting the SRAM. :(
255 commands per channel are supported on the 3940.
7) Read the seeprom starting at addres 32 for the second channel of the
3940 so we get the right info for that channel.
8) Clean up printing of the "Disabling tagged queuing message".
9) Queue timeouts if they occur while we are handling a timeout. The code
was totally unprotected in this scenario.
Reviewed by: Timeout code reviewed by David Greenman <davidg>
contiguous memory in virtual space, but doesn't guarantee any particular
physical layout of pages, the script may be not contguous in physical
memory. This made the first write command fail in very rare cases.
This has been fixed by checking the region returned by malloc() for
being contiguous, but there should be a physical memory allocate
and later mapping to virtual memory instead.
A few assertions and error messages are improved.
the group map after encountering a badly formatted entry.
getpwent.c: same as above for _nextyppass(), and also turn a couple of
sprintf()s into snprintf()s to avoid potential buffer overruns. (The
other day I nearly went mad because of a username in my NIS database
that's actually 9 characters long instead of 8. Stuffing a 9-character
username into an 8-character buffer can do some strange things.)
(This reminds me: I hope somebody's planning to fix the buffer overrun
security hole in syslog(3) before 2.1 ships.)
/*
+ * Code for MTERASE added by John Lind (john@starfire.mn.org) 95/09/02.
+ * This was very easy due to the excellent structure and clear coding
+ * of the original driver.
+ */
This gives us more room to breath with tty names, especially with drivers
that support large numbers of ports.. eg: specialix and digiboard.
This does not actually change the current tty names, it just allows room
for reporting more characters if the drivers use them.
on the installation floppy.
Also pulled the entity definitions for the various sections out
of handbook.sgml and put them in their own file since they are used
both by handbook.sgml (the full version) and boothelp.sgml (the
abridged version).
Better performance -- more aggressive read-ahead
under certain circumstanses.
Mods to support clustering on small
( < PAGE_SIZE) block size filesystems (e.g. ext2fs,
msdosfs.)
changes to allow devices that don't probe (e.g. /dev/mem)
to create devfs entries
this required giving 'configure' its own SYSINIT entry
so we could duck in just before it with a DEVFS init
and some device inits..
my devfs now looks like:
./misc
./misc/speaker
./misc/mem
./misc/kmem
./misc/null
./misc/zero
./misc/io
./misc/console
./misc/pcaudio
./misc/pcaudioctl
./disks
./disks/rfloppy
./disks/rfloppy/fd0.1440
./disks/rfloppy/fd1.1200
./disks/floppy
./disks/floppy/fd0.1440
./disks/floppy/fd1.1200
also some sligt cleanups.. DEVFS needs a lot of work
but I'm getting back to it..
"update -jHEAD" when a file has been added on the specified tag.
It doesn't actually make cvs 'handle' it, it just stops it from dying
and leaving stray locks and other wreckage.
This was suggested by the CVS maintainers, and is in cvs-1.5.1-950901.
on, which is fine, except that _yp_dobind() is called before we check
the cache. The means we can return from the cache check (if we have
a hit) without calling _yp_unbind().
We should do the cache check first and _then_ drop into the section
that binds the server and does the yp_match query.
seperate function to avoid duplication. Also fix getpwent() a
small bit to properly handle the case where the magic NIS '+'
entry appears before the end of the password file.
getgrent.c: be a little more SunOS-ish. Make it look like the NIS
group map is 'inserted' at the the point(s) where the magic NIS '+'
entry/entries appear.
getgrent: fix a file descriptor leak: remember to close the netgroup
file after we determine that we're using NIS-only innetgr() lookups.
correctly whether a user is local or NIS (or both, or neither). If you
have a user that exists locally but not in NIS, passwd(1) could get
confused and try to submit the password change to NIS. (Fortunately,
yppasswdd is smart enough to spot the error and reject the change.)
Bug reported by: Charles Owens <owensc@enc.edu>
