we will fail later and we can miss good kernel source tree directory.
I found this trying to compile kld module and it finds 'conf/kmod.mk'
in '../..', but it fails later, because there is no 'kern' directory,
but there is valid kernel source tree still in /usr/src/sys/.
existence of this file. This stopped working more than 4 years ago when
the generation of the error was added in rev.1.44. The .error directive
gives fatal errors, so stale /etc/make.conf.local files must have been
gone away more than 4 years on systems where make(1) works.
Fix 'broken' ifdefs.
icc does not support profiling yet so remove unfinished code which was
supposed to help.
Submitted by: netchild (original version)
Reviewed by: ru
Intel C/C++ compiler (lang/icc) to build the kernel.
The icc CPUTYPE CFLAGS use icc v7 syntax, icc v8 moans about them, but
doesn't abort. They also produce CPU specific code (new instructions
of the CPU, not only CPU specific scheduling), so if you get coredumps
with signal 4 (SIGILL, illegal instruction) you've used the wrong
CPUTYPE.
Incarnations of this patch survive gcc compiles and my make universe.
I use it on my desktop.
To use it update share/mk, add
/usr/local/intel/compiler70/ia32/bin (icc v7, works)
or
/usr/local/intel_cc_80/bin (icc v8, doesn't work)
to your PATH, make sure you have a new kernel compile directory
(e.g. MYKERNEL_icc) and run
CFLAGS="-O2 -ip" CC=icc make depend
CFLAGS="-O2 -ip" CC=icc make
in it.
Don't compile with -ipo, the build infrastructure uses ld directly to
link the kernel and the modules, but -ipo needs the link step to be
performed with Intel's linker.
Problems with icc v8:
- panic: npx0 cannot be emulated on an SMP system
- UP: first start of /bin/sh results in a FP exception
Parts of this commit contains suggestions or submissions from
Marius Strobl <marius@alchemy.franken.de>.
Reviewed by: silence on -arch
Submitted by: netchild
- Don't put libc.a as a dependency if program is linked with -nostdlib.
- Added INTERNALPROG (by analogy to INTERNALLIB) for programs which are
built only for its side effect and shold not be installed.
- do not use PROG for what's not a real C program,
- use sys.mk transformation rules where possible,
- only create the "machine" symlink on AMD64,
- removed MAINTAINER lines in individual makefiles,
- added the LIBSTAND defitinion to <bsd.libnames.mk>,
- somewhat better contents in .depend files.
Tested on: i386, amd64
Prodded by: bde
CFLAGS in all cases, but POSIX requires a default of -O. Adding
-pipe unconditionally still is still broken for non-gcc compilers
in the non-POSIX case.
- Added missing NOCRYPT and NO_OPENSSL checks for Kerberos.
- Don't depend on -lcrypto and -lcrypt in pam_ssh to resolve
dependencies in pam_krb5 and pam_ksu -- the former may not
be compiled at all if NO_OPENSSH knob is enabled.
- Added missing -lcrypt to pam_ssh dependencies.
- Moved librpcsvc after libypclnt.
(The last two aren't strictly speaking necessary to resolve
the dependencies of static versions of pam_ssh and pam_unix,
respectively, but they correspond to dynamic dependencies
of libssh and libypclnt, and are put here for consistency.)
In collaboration with: bde
Reviewed by: des
missing and there are multiple choices using multiple inference
(suffix transformation) rules.
This is known to fix compilation of s_log1p.o in lib/msun on i386,
as otherwise it attempted to use s_log1p.S as the source (which is
marked broken) instead of legal s_log1p.c which is in CFLAGS. The
normal case where .depend file exists is not affected.
Reviewed by: bde
needed for generating dependencies. SRCS are always part of it,
and normally only they.
This can be useful in some random cases where it's necessary to
have something in .depend that isn't part of SRCS. This will be
used to replace a hack in lib/libpam/libpam/Makefile.
form became unnecessary with the bsd.prog.mk,v 1.69 change.
- Eliminated duplicate y.tab.h in SRCS.
Reviewed by: bde
- Complementary to the said bsd.prog.mk change, use the fact
that inner .for loops are not real loops but a tricky form
of a local macro for the outer loop's variable, and switch
to using faster variable modifiers to replace extensions.
libraries to be reported as up-to-date.
Before:
# make -f /dev/null nonexistent.a
`nonexistent.a' is up to date.
After:
# make -f /dev/null nonexistent.a
make: don't know how to make nonexistent.a. Stop
PR: bin/44137 (part of)
as it was decided that our toolchain will revert to looking
for libraries in /usr/lib only.
- Make /usr/lib/libfoo.so -> /lib/libfoo.so.X symlinks absolute
so that they still work if /usr is symlinked.
- Remove stale /usr/lib/libfoo.so.X libraries during install.
Discussed with: gordon, obrien, peter
hose your system. You end up with just about everything statically linked
(except for libpam.so), which then causes all the pam users to fail.
eg: login, sshd, su etc all stop working because dlopen no longer works
because there is no libc.so in memory anymore.
gcc passes -L/usr/lib to ld. The /usr/lib/libxxx.so symlink is *not* a
compatability link. It is actually the primary link. There should be no
symlinks in /lib at all. Only /lib/libXX.so.Y.
peter@daintree[9:27pm]/usr/bin-104> file yppasswd
yppasswd: setuid ELF 32-bit LSB executable, Intel 80386, version 1 (FreeBSD), for FreeBSD 5.1.1, dynamically linked (uses shared libs), stripped
peter@daintree[9:27pm]/usr/bin-105> ldd yppasswd
yppasswd:
libpam.so.2 => /usr/lib/libpam.so.2 (0x280d1000)
peter@daintree[9:28pm]/usr/bin-106>
Note no libc.so.5. Hence libpam.so.2 has unresolved dependencies.
I believe this is also the cause of the recent buildworld failures when
pam_krb5.so references -lcrypto stuff etc and when librpcsvc.so references
des_setparity() etc.
This change could not possibly have worked, unless there are other missing
changes to the gcc configuration. It won't work with ports versions of
gcc either.
are created in the correct location. Always make them. For libraries
that live in /lib, this causes a /lib/libfoo.so and a compatibility
/usr/lib/libfoo.so to be created. We may want to drop the
/usr/lib/libfoo.so symlink at some future point.
need relative pathing to work correctly. This is s necessary step
for putting libraries in /lib while the .so symlinks still live
in /usr/lib.
This should be a big NOOP in the case where SHLIBDIR == LIBDIR.
This is simpler, and is easy to do now that make(1) supports substituting
regexps. Fixed missing '$' anchor in the regexp. Use less cryptic names
for temporary variables.
Submitted by: ru (early version)
Reviewed by: ru
All .s files that need cpp(1) processing (see gcc(1) manpage's
DESCRIPTION section) have been repo-copied to .S files. This
is mostly to bring bsd.lib.mk in agreement with sys.mk.
Desired by: obrien
symbols from object files has bitrotted over the last
thirteen years, and it now does more harm than good.
An attempt to work around the problems caused by using
ld(1) for stripping was to pass LDFLAGS to the ld(1)
command, but this was not right either as ${LDFLAGS}
should, by design, be used with cc(1) and not ld(1).
One of the proposed solutions was to use the objcopy(1)
utility to do the strip work, and the other would be to
use strip(1), but Bruce Evans suggested not stripping
any symbols at all. This works by leaving the grunt
work to the final strip(1) command (when installing the
binary).
Submitted by: bde
components. This is generally considered a non-optimal solution but
it gets the job done for the /rescue case.
Submitted by: Tim Kientzle <kientzle@acm.org>
uses alloca() and alloca is impossible to implement as a callable function
on amd64. It has to be a compiler builtin. Note that the bigger problem
is that libc is not c99 clean internally.
known to produce broken code with -march=pentium4. Add a note explaining this.
This should be removed when we update to gcc 3.3 or the bug is otherwise fixed.
Approved by: re
in which the source code is written. This is controlled by the CSTD
variable, which can have one of the following values:
- "k&r" => -traditional
- "c89" or "c90" => -std=iso9899:1990
- "c94" or "c95" => -std=iso9899:199409
- "c99" => -std=iso9899:1999
The corresponding option is added to CFLAGS regardless of WARNS level.
This also removes -ansi from WARNS level 6, but adds -Wno-long-long to
work around a weird gcc bug (-ansi, which is supposedly equivalent to
-std=iso9899:1990, seems to turn long long warnings off instead of on)
If CSTD is undefined, CFLAGS are unchanged except for the -ansi /
-Wno-long-long change mentioned above for WARNS level 6.
FreeBSD. This method attempts to centralize all the necessary hacks
or work arounds in one of two places in the tree (src/Makefile.inc1
and src/tools/build). We build a small compatibility library
(libbuild.a) as well as selectively installing necessary include
files. We then include this directory when building host binaries.
This removes all the past release compatibilty hacks from various
places in the tree. We still build on tip of stable and current. I
will work with those that want to support more, although I anticipate
it will just work.
Many thanks to ru@, obrien@ and jhb@ for providing valuable input at
various stage of implementation, as well as for working together to
positively effect a change for the better.
glibc which is externally maintained, so GCC ships with these
warnings turned off by default. This is also consistent with
the src/contrib/gcc/c-lex.c,v 1.2 change.
Always use sys/conf/kern.mk when building kernel/modules.
<bsd.kern.mk> is only preserved for sys/boot/pc98/boot2
for now, but this will be fixed. If there are other
users of <bsd.kern.mk>, please let me know.
Reminded by: bde
for the -static flag instead when constructing LIBPAM.
(This fixes false warnings from ``make checkdpadd -DNOSHARED'' in
lib/libpam/modules/.)
Submitted by: bde, ru
Approved by: re
Don't gratuitously pipe thru a cat(1) if NODOCCOMPRESS.
Only create _stamp.extra when necessary.
Get rid of SOELIMPP and OBJS.
Use Groff version of soelim(1); we need its -I option
for the following to work.
Don't needlessly chdir to SRCDIR. Only a few documents
need CD_HACK, and those that need it either use refer(1)
or .PSPIC macro which internally uses the .psbb call.
to creating the tags file using ctags(1). Defaults to "gtags".
Made GTAGSFLAGS and HTAGSFLAGS overrideable, added CTAGSFLAGS.
Folded bsd.prog.mk version of `tags' into bsd.dep.mk.
PR: bin/42852
Fix the "@gprel relocation against dynamic symbol xxx" linker error.
Variables defined in the link unit and small enough to be put in the
short data section will have a gp-relative access sequence (using the
@gprel relocation). It is invalid to have @gprel relocations in shared
libraries, because they are to be resolved by the static linker and
not the dynamic linker. The -fpic option will cause @ltoff relocations
for @gprel relocations, but the side-effects are untested (if any).
Instead, disable/eliminate the short data section to achieve the same.
In "nroff" mode, italic font renders as an underlined text, which
makes it indistinguishable from the bold text on color monitors
(cons25 terminal type), yet it requires the less(1)'s -R option.
(Refer to the new grotty(1) manpage for details.)
So turn off the color support for now (when generating catpages),
until we figure out what do we do with this new feature. I have
a patch for grotty(1) that tells it to use the "reverse video"
attribute to render the italic font. Once this is accepted, we
can turn color support back on (if there won't be any objections
from the community).
This reduces the size of GENERIC's text space by 73999 bytes (about 2%).
The bloat is from approximately 3437 strings longer than 31 characters
being padded to a 32-byte boundary.
o Make it possible to prevent parts of the tree from being linted
(say) during a 'make world' by setting NOLINT in a leaf Makefile.
o Make "make lint" work (better) for executable programs.
o Clean up (nuke!) a syntax damaged pipeline.
lowest value in order to get the right MACHINE_CPU values since setting
CPUTYPE can result in problems later in the buildkernel case. Instead,
set MACHINE_CPU directly and leave CPUTYPE alone.
Tested by: mbr
under way to move the remnants of the a.out toolchain to ports. As the
comment in src/Makefile said, this stuff is deprecated and one should not
expect this to remain beyond 4.0-REL. It has already lasted WAY beyond
that.
Notable exceptions:
gcc - I have not touched the a.out generation stuff there.
ldd/ldconfig - still have some code to interface with a.out rtld.
old as/ld/etc - I have not removed these yet, pending their move to ports.
some includes - necessary for ldd/ldconfig for now.
Tested on: i386 (extensively), alpha
ev6 or pca56 etc this downgrades the cpu specification passed to gas.
As a result, gas will fail when gcc generates media instructions (in
uipc_usrreq.c). This only affects what gas will accept, not what gcc
generates or what our *.s file contain.
TARGET_ARCH and TARGET. This is problematic when one has the =
(unconditional) type of assigment for CPUTYPE in /etc/make.conf.
(This would override what was set on the command line to "make
buildworld".)
Add a (horrible) kludge to Makefile.inc1 to check the type of
assignment for CPUTYPE (only for those who attempts to set it to
a different value). Fix an example make.conf. Fix the kernel's
build-tools target (aicasm only at the moment) to catch up with
bsd.cpu.mk,v 1.15 (BOOTSTRAPPING replaced with NO_CPU_CFLAGS in
Makefile.inc1's BMAKE).
Reviewed by: jhb
bsd.cpu.mk doesn't have to worry about compilers other than the current
version.
- Allow TARGET_CPUTYPE to override CPUTYPE in bsd.cpu.mk.
- Treat an empty CPUTYPE the same as an undefined CPUTYPE.
- For buildworld, buildkernel, etc., define TARGET_CPUTYPE to CPUTYPE for
native builds and define it to be empty for cross-builds.
TARGET_CPUTYPE is only defined if it is not already defined via the
commandline or environment.
- To minimize whitespace changes, remove a test that didn't define
_CPUCFLAGS if both NO_CPU_CFLAGS and NO_CPU_COPTFLAGS were defined
since it is redundant (we don't use _CPUCFLAGS if those are defined).
to tune for more advanced processors while still supporting the minimum
processor in an architecture. We can do this with the '-mtune=' option
to gcc for alpha, sparc64, and powerpc and with the mis-named '-mcpu='
option for i386.
This defaults to tuning i386 builds for i686 machines though not using
any instructions that aren't found on an 80386. For alpha it defaults
to tuning for an EV5.
Approved by: peter
Peril sensitive sunglasses borrowed from: peter
to make it call `install' in the bsd.subdir.mk-driven makefiles
too. (share/examples/Makefile,v 1.29 changed the bsd.prog.mk
to bsd.subdir.mk and many stuff was lost during "make release".
I then merged this change in rev. 1.28.2.2 to work around the
namespace pollution (FILES) in this makefile.)
There was an added complexity here. Both the `distribute' and
`install' targets are recursive (they propagate to SUBDIRs).
So `distribute' first calls `install' in the ${.CURDIR}, then
calls `distribute' in each SUBDIR, etc. The problem is that
`install' (being also recursive) causes the stuff from SUBDIR
to be installed twice, first time thru `install' in ${.CURDIR}
triggered by `distribute', second time by `distribute' run in
the SUBDIR. This problem is not new, but it became apparent
only after I moved the `distribute' target from bsd.obj.mk to
bsd.subdir.mk. My first attempt testing the fix failed due to
this, because the whole world was distributed twice, causing
all the imaginable mess (kerberos5 stuff was installed into both
"base" and "krb5" dists, there was /sbin/init.bak, etc.)
I say the problem is not new because bsd.prog.mk and bsd.lib.mk
makefiles with SUBDIR (even without this fix) had this problem
for years. Try e.g. running ``make distribute DISTDIR=/foo''
from usr.bin/bzip2 or from lib/libcom_err (without the fix) and
watch the output.
So the solution was to make `install' behave non-recursive when
executed by `distribute'. My first attempt in passing SUBDIR=
to the `install' in the `distribute' body failed because of the
way how src/Makefile and src/Makefile.inc1 communicate with each
other. SUBDIR='s assignment precedence on the "make install
SUBDIR=" command line is lowered after src/Makefile wrapper calls
"make ... -f ${.CURDIR}/Makefile.inc1 install" because SUBDIR=
is moved into environment, and Makefile.inc1's assignments now
take higher precedence. This may be fixed someday when we merge
Makefile with Makefile.inc1. For now, this is implemented as a
NO_SUBDIR knob.
Spotted by: Dmitry Pryanishnikov <dmitry@atlantis.dp.ua>
Prodded by: des
MFC after: 3 days
directives to ensure that all realinstall sub-tasks are executed
after beforeinstall, similarly ensure that all afterinstall sub-
tasks are executed after realinstall. Demonstration:
all: task1 task2
.ORDER: task1 task2
task2: task2_subtask
.ORDER: task1 task2_subtask
task1 task2 task2_subtask:
@sleep `jot -r 1 0 1.0`
@echo ${.TARGET}
Without the second .ORDER directive, task2_subtask can be run in
parallel with task1.
Spotted by: Andrea Campi <andrea@webcom.it>
Provided the (previously missing) dependency on source files
for intermediate .msg files.
Provided the default for NLSSRCDIR (defaults to .CURDIR).
Slightly changed the API: NLS should now list plain locale
names, without the .msg suffix.
When included from bsd.prog.mk, NLSNAME defaults to PROG.
and afterinstall targets. Make sure they are run in sequence in the
-j case.
This fixes the recent breakage with beforeinstall being run _after_
realinstall.
Reported by: knu
same set of features as in recently added bsd.incs.mk
(FILESGROUPS, accessibility from both bsd.prog.mk and
bsd.lib.mk, de-pessimized typical installation path,
etc.) New standard targets: buildfiles, installfiles,
and files (buildfiles + installfiles).
back to -fformat-extensions (or whatever) when we have the functionality.
We are gaining warnings again that should be fixed but the are being hidden
by NO_WERROR and all the -Wformat noise.
Rename `incsinstall' to `installincludes'.
Make `includes' a -j safe shortcut for `buildincludes' + `installincludes'.
`buildincludes' and `installincludes' are SUBDIR friendly, if run directly.
Get rid of the INTERNALSTATICLIB knob and just use plain INTERNALLIB.
INTERNALLIB now means to build static library only and don't install
anything. Added a NOINSTALLLIB knob for libpam/modules. To not
build any library at all, just do not set LIB.
via INCS. Implemented INCSLINKS (equivalent to SYMLINKS) to
handle symlinking include files. Allow for multiple groups of
include files to be installed, with the powerful INCSGROUPS knob.
Documentation to follow.
Added standard `includes' and `incsinstall' targets, use them
in Makefile.inc1. Headers from the following makefiles were
not installed before (during `includes' in Makefile.inc1):
kerberos5/lib/libtelnet/Makefile
lib/libbz2/Makefile
lib/libdevinfo/Makefile
lib/libform/Makefile
lib/libisc/Makefile
lib/libmenu/Makefile
lib/libmilter/Makefile
lib/libpanel/Makefile
Replaced all `beforeinstall' targets for installing includes
with the INCS stuff.
Renamed INCDIR to INCSDIR, for consistency with FILES and SCRIPTS,
and for compatibility with NetBSD. Similarly for INCOWN, INCGRP,
and INCMODE.
Consistently use INCLUDEDIR instead of /usr/include.
gnu/lib/libstdc++/Makefile and gnu/lib/libsupc++/Makefile changes
were only lightly tested due to the missing contrib/libstdc++-v3.
I fully tested the pre-WIP_GCC31 version of this patch with the
contrib/libstdc++.295 stuff.
These changes have been tested on i386 with the -DNO_WERROR "make
world" and "make release".
and `maninstall' targets. This fixes the issue where each subdir
was descended into twice during "make all", and also resurrects
the standardization of `maninstall'.
Urged by: bde
in progress, and should not have been committed in revision 1.114.
This broke gnu/usr.bin/binutils/strip and usr.bin/strip makefiles;
they were now attempting to install and strip "strip" from objdir.
Pointed out by: bde
This has nothing to do with PR misc/37516.
Do not install games and profiled libraries to the ${CHROOTDIR}
with the initial installworld.
Eliminate the need in the second installworld. For that, make sure
_everything_ is built in the "world" environment, using the right
tool chain.
Added SUBDIR_OVERRIDE helper stuff to Makefile.inc1. Split the
buildworld process into stages, and skip some stages when
SUBDIR_OVERRIDE is set (used to build crypto, krb4, and krb5
dists).
Added NO_MAKEDB_RUN knob to Makefile.inc1 to avoid running
makewhatis(1) at the end of installworld (used when making crypto,
krb4, and krb5 dists).
In release/scripts/doFS.sh, ensure that the correct boot blocks are
used.
Moved the creation of the "crypto" dist from release.5 to
release.2.
In release.3 and doMFSKERN, build kernels in the "world"
environment. KERNELS now means "additional" kernels, GENERIC is
always built.
Ensure we build crunched binaries in the "world" environment.
Obfuscate release/Makefile some more (WMAKEENV) to achieve this.
Inline createBOOTMFS target.
Use already built GENERIC kernel modules to augment mfsfd's
/stand/modules. GC doMODULES as such.
Assorted fixes:
Get rid of the "afterdistribute" target by moving the single use
of it from sys/Makefile to etc/Makefile's "distribute".
Makefile.inc1: apparently "etc" no longer needs to be last for
"distribute" to succeed.
gnu/usr.bin/perl/library/Makefile.inc: do not override the
"install" and "distribute" targets, do it the "canonical" way.
release/scripts/{man,cat}pages-make.sh: make sure Perl manpages and
catpages appear in the right dists. Note that because Perl does
not respect the MANBUILDCAT (and NOMAN), this results in a loss of
/usr/share/perl/man/cat* empty directories. This will be fixed
soon.
Turn MAKE_KERBEROS4 into a plain boolean variable (if it is set it
means "make KerberosIV"), as documented in the make.conf(5)
manpage. Most of the userland makefiles did not test it for "YES"
anyway.
XXX Should specialized kerberized libpam versions be included into
the krb4 and krb5 dists? (libpam.a would be incorrect anyway if
both krb4 and krb5 dists were choosen.)
Make sure "games" dist is made before "catpages", otherwise games
catpages settle in the wrong dist.
Fast build machine provided by: Igor Kucherenko <kivvy@sunbay.com>
to build kernel and kernel modules so stop supporting them in
bsd.subdir.mk and reimplement them in kern.post.mk and kmod.mk
as special versions of the install and reinstall targets, and
only define them if DEBUG is also defined (when debug versions
are really built).
Prompted by: bde
Ensure all standard targets honor SUBDIR. Now `make obj' descends into
SUBDIRs even if NOOBJ is set (some descendants may still need an object
directory, but we do not have such precedents). Now `make install' in
non-bsd.subdir.mk makefiles runs `afterinstall' target _after_ `install'
in SUBDIRs, like we do in bsd.subdir.mk. Nothing depended on the wrong
order anyway.
Fixed `distribute' targets (except for the bsd.subdir.mk version) so that
they do not depend on _SUBDIR; `distribute' calls `install' which already
depends on _SUBDIR.
De-standardize `maninstall', otherwise manpages would be installed twice.
(To be revised later.)
to use ``.if defined()'' inside bsd.own.mk to test for defines
in individual makefiles. For example, setting DEBUG_FLAGS in
Makefile didn't take the desired effect on the STRIP assignment.
Added bsd.init.mk (like in NetBSD) that handles the inclusion
of ../Makefile.inc and bsd.own.mk from all bsd.*.mk files that
"build something".
Back out bsd.own.mk,v 1.15: moved OBJFORMAT initialization back
to sys.mk (several source tree makefiles want to check it early)
and removed MACHINE_ARCH initialization (it's hard to see from
looking at the commitlogs what the problem was at the time, but
now it serves no purpose).
Prohibit the direct inclusion of bsd.man.mk and bsd.libnames.mk.
Protect bsd.obj.mk from repetitive inclusion. Prohibiting the
direct inclusion of bsd.obj.mk might be a good idea too.
indeed a good change, I shouldn't have made it after testing
with the -DNOCLEAN buildworld. There are far too many users
of this misfeature under sys/boot/. I will reapply the change
after I fix these.
This change has been tested with the clean buildworld.
Make the defined(SRCS) case similar to the !defined(SRCS)
case - only define ${PROG}: ${OBJS} if the ${PROG} target
does not exist. This has only one precedence in the entire
source tree, usr.bin/doscmd, and its Makefile is horribly
broken. I will temporarily unconnect it from build until
I'm working on the fix.
have the __FBSDID() macro in <sys/cdefs.h>. Fix this once and for all
for tools that need to be bootstrapped.
PR: bin/36747
MFC after: 3 days
Prodded by: obrien
the .PATH (but not in the ${.OBJDIR}) would result in a leak of
the ${OBJS}: ${SRCS:M*.h} dependency hint.
Spotted by: fixing the broken gnu/usr.bin/cc/cc1obj build
MFC after: 1 day
(See commit log for usr.bin/xlint/Makefile,v 1.11 for what was wrong
with enabling build of lint libraries in rev. 1.12.)
This fixes cross-arch compiles (running binaries for a different arch
when generating lint.7 and lint libraries) and cross-branch compiles
(4.x -> 5.0 buildworld should be working again).
"env name=value ... cmd ..." was just a pessimized way of doing
"name=value ... cmd ...". Note that make(1) can't optimize
either of these to an exec of env(1) or "cmd" even if the second
"..." is simple, since it can't tell that the shell metacharacter
in "name=value" is actually handled by env(1).
Use this where we are now using /etc/make.conf.
This allows people to override the current default of always including
/etc/make.conf. Setting __MAKE_CONF to /dev/null disables it
completely, while setting it to something else allows one to override
what is on the system. This can be desirable in situations where a
machine has many users and some of them want different defaults, or
defaults appropriate to cross building to be different than those for
normal building.
Not objected to by: arch@
lint, so this is turned off by default. Setting WANT_LINT will turn
on generation of lint libraries for /usr/libdata/lint/*.ln.
Reviewd by: silence in -audit.
to pick up the correct cross-tools (the compiler executables and binutils)
and special linker files (crt*.o). This is now controlled by a single knob,
TOOLS_PREFIX, when building cross-tools.
Fixed regression in Makefile.inc1,v 1.203 (-nostdinc). This clobbered target
architecture's CFLAGS with building host's CPUTYPE setting in /etc/make.conf,
and had a nice but nasty side effect of exposing some (normally hidden) bugs
in system headers.
(Attempt to move the "-nostdinc -I..." part of CFLAGS into the new CINCLUDES
(modeled after a similar CXXINCLUDES) eventually failed because hard-coding
${WORLDTMP}/usr/include to be the first in the include list does not always
work, e.g. lib/libbind.)
Compensate the -nostdinc removal by making cpp(1) built in the cross-tools
stage to not look for <> header files in the building host's /usr/include
(already committed as gnu/usr.bin/cc/cc_tools/freebsd-native.h, revisions
1.10-1.12, STANDARD_INCLUDE_DIR).
: $ /usr/obj/usr/src/i386/usr/bin/cpp -v /dev/null
:
: Before:
:
: #include <...> search starts here:
: /usr/obj/usr/src/i386/usr/include
: /usr/include
: End of search list.
:
: After:
:
: #include <...> search starts here:
: /usr/obj/usr/src/i386/usr/include
: /usr/obj/usr/src/i386/usr/include
(Disabling the use of GCC_INCLUDE_DIR in the FREEBSD_NATIVE case would fix
the duplicate above.)
Get rid of the (now unneeded) -I${DESTDIR}/usr/include magic in bsd.prog.mk
and bsd.lib.mk. Finish the removal of LDDESTDIR in bsd.lib.mk,v 1.55 -- we
no longer have users of it.
The required changes to gcc were already committed as contrib/gcc.295/gcc.c,
revisions 1.23 and 1.24.
Basically, this allows for the changes above plus makes gcc(1) persistent
about path configuration, whether it's configured as a native or a cross
compiler:
: $ /usr/obj/usr/src/i386/usr/bin/cc -print-search-dirs
: install: /usr/obj/usr/src/i386/usr/libexec/(null)
: programs: /usr/obj/usr/src/i386/usr/libexec/elf/:/usr/obj/usr/src/i386/usr/libexec/
: libraries: /usr/obj/usr/src/i386/usr/lib/
:
: $ /usr/obj/alpha/usr/src/i386/usr/bin/cc -print-search-dirs
: install: /usr/obj/alpha/usr/src/i386/usr/libexec/(null)
: programs: /usr/obj/alpha/usr/src/i386/usr/libexec/elf/:/usr/obj/alpha/usr/src/i386/usr/libexec/
: libraries: /usr/obj/alpha/usr/src/i386/usr/lib/
Reviewed by: bde, obrien
- Spam /usr/lib some more by making libssh a standard library.
- Tweak ${LIBPAM} and ${MINUSLPAM}.
- Garbage collect unused libssh_pic.a.
- Add fake -lz dependency to secure/ makefiles needed for
dynamic linkage with -lssh.
Reviewed by: des, markm
Approved by: markm
