* Fix a bug where devices weren't cleaned up on close(): CAM_REQ_CMP != 0
user:
* Increase timeout in usermode to CAM_TIME_INFINITY. The initiator is in
charge of timeouts and the value was in ms, not seconds.
* Bring two debugging printfs under the debug flag
* Clean up man page to show increased testing on isp(4)
Submitted by: gibbs (bugfixes)
The /usr/bin/perl wrapper isn't solving many of the problems it was
imported to deal with. There are limitations to it that don't have a
clear "fix".
Reviewed by: markm, kris
Extorted approval from: re(jhb)
This code allows a user program to enable target mode on a SIM and
then emulate any number of devices (disks, tape drives, etc.) All
decisions about device behavior (UA, CA, inquiry response) are left
to the usermode program and the kernel driver is merely a conduit
for CCBs. This enables multiple concurrent target emulators, each
using its own backing store and IO model.
Also included is a user program that emulates a disk (RBC) using a
file as a backing store. This provides functionality similar to
md(4) at the CAM layer.
Code has been tested on ahc(4) and should also work on isp(4) (and
other SIMs that gain target mode support). It is a complete rewrite
of /sys/cam/scsi_target* and /usr/share/examples/scsi_target.
Design, comments from: gibbs
Supported by: Cryptography Research
Approved by: re
by looking at the "type of number" field and providing configurable hooks
to correct the numbers accordingly. See keywords add-prefix, prefix-national
and prefix-international in isdnd.rc(5).
This feature was implemented by Christian Ullrich <chris@chrullrich.de>
TARGET_ARCH and TARGET. This is problematic when one has the =
(unconditional) type of assigment for CPUTYPE in /etc/make.conf.
(This would override what was set on the command line to "make
buildworld".)
Add a (horrible) kludge to Makefile.inc1 to check the type of
assignment for CPUTYPE (only for those who attempts to set it to
a different value). Fix an example make.conf. Fix the kernel's
build-tools target (aicasm only at the moment) to catch up with
bsd.cpu.mk,v 1.15 (BOOTSTRAPPING replaced with NO_CPU_CFLAGS in
Makefile.inc1's BMAKE).
Reviewed by: jhb
now needs to set COPY=-C as -C is no longer compatible with the -d
option. It is also likely to be renamed to INSTALL_COPY soon.
Update documentation to reflect this change.
PR: bin/40724
PR: 38096
Submitted by: Chris Pepper <pepper@rockefeller.edu>
While I'm here correct some typos pointed out by ispell.
Approved by: sheldonh (mentor)
MFC after: 1 week
permissions to use for alias and map database files built by
/etc/mail/Makefile. The default is 0640 to assist users in avoiding
a file locking local denial of service.
MFC after: 1 day
pending RE approval
PR: 37796
Submitted by: drs@rucus.ru.ac.za
MFC after: 1 week
Note, I don't usually look after pppd (just ppp), so I haven't
removed the ftp and ingres users as I guess they're there for
a reason....
1. The committer refused to respond to questions over the commit.
2. The servers rlogind, rshd, rexecd were not wrapped.
3. "rcmnds" as an abbreviation gets an order of magnitude less hits on
Google than the much more well known "rcmds".
the .mc file used for /etc/mail/submit.cf. By default,
/etc/mail/freebsd.submit.mc is installed and used.
Requested by: fenner
Submitted by: ume
MFC after: 1 week
To do this you need to have each top-end connected as well.
IP can be routed and other protocols get bridged..
Also useful when bridgeing two networks while merging them as
machines will work with both old and new netmasks. (well mostly).
/usr/share/examples/pppd.
Update pppd(8) documentation to reflect this, usr.sbin/pppd/pppd.8.
Remove the out-of-place pppd(8) configuration files in etc/ppp,
ppp.shells.sample and ppp.deny.
Make the appropriate changes to the build process, etc/Makefile and
etc/mtree/BSD.usr.mtree, so it all works.
The files from etc/ppp, ppp.shells.sample and ppp.deny, were moved
with a repo copy. Note it in the logs with a forced commit to these
two.
Submitted by: Maxim Konovalov <maxim@macomnet.ru> provided the new samples.
translations. This will once again allow docproj trackers to use the
sample out-of-the-box to only download English.
Rapid MFC to avoid the coming freeze.
PR: 32329
Approved by: bmah
MFC after: 1 day
We don't install dot.nsmbrc or smbfs.sh.sample, since we already install
the former as /etc/nsmb.conf and the latter is unnecessary, since
boot-time mounts can be arranged directly within /etc/fstab without fear
of breaking the boot when the smbfs port (now unnecessary is removed).
The MFC reminder below is subject to <re@FreeBSD.org> approval
priod to 4.5-RELEASE.
MFC after: 1 week
- Change the 'fopen' keyword to accept a mode parameter. Note that this
will break existing 4th scripts that use fopen. Thus, the loader
version has been bumped and loader.4th has been changed to check for a
sufficient version on i386 and alpha. Be sure that you either do a full
world build or install or full build and install of sys/boot after this
since loader.old won't work with the new 4th files and vice versa.
PR: kern/32389
Submitted by: Jonathan Mini <mini@haikugeek.com>
Sponsored by: ClickArray, Inc.
name of a file containing ipfw rules.
2) Replace the use of a predictable temporary filename with one
generated by mktemp(1).
3) Only exit with a zero exit status if the rules were updated.
4) Use a pager to view the new rules, not an editor.
I was told by dcs that this script's original author is no longer
interested in FreeBSD and would not wish to review this patch.
discussed on the arch@ mailinglist (after repo-copy).
sys.mk will .error if it finds /etc/defaults/make.conf but include
it anyways (this is the same behaviour as with the make.conf.local
removal).
/usr/share/examples/etc/make.conf has BDEFLAGS commented out now,
since it's only an example file.
Adjust all textes that talk about make.conf or defaults/make.conf to
match the new situation.
value, it forces GCC to not optimize above this level. For intance, GCC
made with "WANT_FORCE_OPTIMIZATION_DOWNGRADE=1" is a good setting for the
Alpha platform when building ports.
should not use a `%' in examples.
I don't know if this is the consensus of doc@, or just a unilateral decision
of committer that corrected my following of this example. Maybe a docs
person could review these files and see if they still show current guidelines.
us anyway because it doesn't work right on the x86 and alpha. On
K&R code, small ints would be promoted to int. ANSI-C doesn't require
this and the small ints can be passed taking 8 or 16 bits of stack
space. However, the x86 abi that we use *does* promote to 32 bit,
and the alpha ABI passes them in 64 bit registers so we dont have
that aspect of the problem here. Losing float precision by having it
cast down to int because the funtion prototype specifies int is the
least of our problems. -Wmissing-prototypes helps here anyway.
building a .cf file from a .mc file.
Include -D_FFR_TLS_O_T to enable tls policy control since the sendmail binary
build enables that FFR as well.
PR: conf/28361
MFC after: 1 week
ppp in 4.x apparently does a close(2) after opening the tun device;
i4brunppp starts up with only file descriptors 0 and 1 open (to the rbch
device) -> tun gets opened as 2 -> tun gets closed -> later use results
in EBADF. A quick fix to i4brunppp.c makes the thing work (I know, this
is ugly, but I needed it up quick...):
Submitted by: Juha-Matti Liukkonen <jml@cubical.fi>
to have the $FreeBSD$ keyword, as this is now enforced
by the CVSROOT/commit_prep.pl script.
Fold multi-word macro arguments into a single argument
by putting the surrounding double quotes - this speeds
up the -mdoc processing drastically (of course if used
systematically).
Use the new features of -mdoc: exact -width specifiers,
.In macro as an ``.Fd #include'' replacement.
This work was based on kame-20010528-freebsd43-snap.tgz and some
critical problem after the snap was out were fixed.
There are many many changes since last KAME merge.
TODO:
- The definitions of SADB_* in sys/net/pfkeyv2.h are still different
from RFC2407/IANA assignment because of binary compatibility
issue. It should be fixed under 5-CURRENT.
- ip6po_m member of struct ip6_pktopts is no longer used. But, it
is still there because of binary compatibility issue. It should
be removed under 5-CURRENT.
Reviewed by: itojun
Obtained from: KAME
MFC after: 3 weeks
IPv6 transport-ready resolvers/DNS servers. Need careful configuration
when enable it. (default config is not affected).
See manpage for details.
XXX visible symbol __res_opt() is added, however, it is not supposed to be
called from outside, libc minor is not bumped.
Obtained from: KAME/NetBSD
Source rc.conf and use ${firewall_script} instead of rc.firewall.
Textwidth formatting of comments and text.
PR:
Submitted by: Maxim <maxim@news1.macomnet.ru>
(sorry if I got name/email/committer status wrong :)
It also has some instructions on how to setup the client and
the server. I have been using this code for over 2 years
on RELENG_3 and later RELENG_4. Have not tried on CURRENT, but
in case there are any issues these are in /etc/rc and
/etc/rc.diskless{12}
so update the example to use the correct definition.
Add an example for documenting kernel compile options, along with
a small example of how to reference them in the main text of the
man page (I.e. the .Dv macro).
Inspired-by: a brief exchange I saw in in the commit messages mail
NO_MAKEDEV_INSTALL and NO_MAKEDEV_RUN. The former implying the latter.
The names imply what they do. The last commit by DES based on a PR defeated
the original idea behind NO_MAKEDEV, which was not to run MAKEDEV, but to do
the installation of MAKEDEV. This should satisfy both parties on the MAKEDEV
challenge.
and Pentium II, III and IV processors (p2, p3, p4), as well as 'mmx' and
'3dnow' MACHINE_CPU tags as appropriate. In the near future this will
be used to control various ports which have MMX/3dNow optimizations,
instead of the ad-hoc methods currently used.
Reviewed by: peter
libssl, for example), and hide it behind a make.conf option,
WANT_OPENSSL_MANPAGES, instead of having it commented out. We still can't
install these by default because of clobbering of a number of system
manpages with the same name, but they're there for people who want them.
* Rip out MACHINE_CPU stuff from sys.mk and include a new <bsd.cpu.mk>
after we pull in /etc/make.conf. We need to do it afterwards so we can
react to the user setting of the:
* CPUTYPE variable, which contains the CPU type which the user wants to
optimize for. For example, if you want your binaries to only run on an
i686-class machine (or higher), set this to i686. If you want to support
running binaries on a variety of CPU generations, set this to the lowest
common denominator. Supported values are listed in make.conf.
* bsd.cpu.mk does the expansion of CPUTYPE into MACHINE_CPU using the
(hopefully) correct unordered list of CPU types which should be used on
that CPU. For example, an AMD k6 CPU wants any of the following:
k6 k5 i586 i486 i386
This is still an unordered list so the client makefile logic is simple -
client makefiles need to test for the various elements of the set in
decreasing order of priority using ${MACHINE_CPU:M<foo>}, as before.
The various MACHINE_CPU lists are believed to be correct, but should be
checked.
* If NO_CPU_CFLAGS is not defined, add relevant gcc compiler optimization
settings by default (e.g. -karch=k6 for CPUTYPE=k6, etc). Release
builders and developers of third-party software need to make sure not to
enable CPU-specific optimization when generating code intended to be
portable. We probably need to move to an /etc/world.conf to allow the
optimization stuff to be applied separately to world/kernel and external
compilations, but it's not any worse a problem than it was before.
* Add coverage for the ia64/itanium MACHINE_ARCH/CPUTYPE.
* Add CPUTYPE support for all of the CPU types supported by FreeBSD and gcc
(only i386, alpha and ia64 first, since those are the minimally-working
ports. Other architecture porters, please feel free to add the relevant
gunk for your platform).
Reviewed by: jhb, obrien
users should be configuring via m4 now. If set, use m4 to create the .cf
file. Also, if either SENDMAIL_MC or SENDMAIL_CF is set, 'make install' or
'make distribution' in src/etc/sendmail/ will install the appropriate .cf as
/etc/mail/sendmail.cf. This fixes some mergemaster problems.
PR: conf/13016
through the use of a new build directive, MACHINE_CPU, which contains a
list of the CPU generations/features for which optimizations are desired.
This feature will be extended to cover the ports tree in the future.
Currently OpenSSL provides optimizations for i386, i586 and i686-class
CPUs. Currently it has not been tested on an i386 or i486.
Teach make(1) to provide sensible defaults for MACHINE_CPU if it is not
defined (namely, the lowest common denominator CPU we support for each
architecture). Currently this is i386 for the i386 architecture and ev4
for the alpha. sys.mk also sets the variable as a last resort for
consistency with MACHINE_ARCH and bootstrapping from very old versions of
make.
Benchmarks show a significant speed increase even in the i386 case, with
additional improvements for i586 and i686 systems. For maximum performance
define MACHINE_CPU=i686 i586 i386 in /etc/make.conf.
Based on a patch submitted by: Mike Silbersack <silby@silby.com>
Reviewed by: current
"FreeBSD.pfa" - the (postscript) font used to write "FreeBSD".
"beastie.fig" - a 4.3 BSD style Daemon in vector graphic.
"beastie.eps" - same converted to encapsulated postscript.
"poster.sh" - an example how to use this stuff.
"README" - the full story.
<bde>
o Add comments in some places to clarify some points.
o Don't typedef sc_p. This isn't usually done in the drivers and may
cause problems in teh future if C goes the C++ route of requiring
one and only one definition for each and every type. Instead use
the current convetion of expanding struct ${1}_softc * inline needed.
o change some comments to be more style(9)-like.
o Define and use DEV2SOFTC to encapsulate storing/getting softc from a
dev_t. This also takes care of the missing cast from the examples.
o Define and use DEVICE2SOFTC, similar to DEV2SOFTC for getting the
softc from a device_t.
</bde>
We still should have this generate foo_{isa,pci,pccard,cardbus,eisa}.c
and foovar.h from templates of some sort, but I was too lazy to do
that in this commit. I did document it in the comments, however.
Note: bde-like corrections made with the help of my my portable
plastic bde icon. Results with the real bde may vary with use.
ENABLE_SUID_SSH being defined reenable it for those that want it.
This follows discussion favoring the change from September. It
is not usually necessary to be setuid root, possibly less safe,
and less convenient (cannot use $HOSTALIASES, for example).
Submitted by: jedgar
I have added support for finding non-PNP devices to this
sample loadable ISA driver.
PCI support will come later.
If someone with a clue about newbus were to look it over it would be
really cool.
This creates a skeleton ISA device driver.
I don't pretend that it's fully correct or even opitimal
but it at least creates (and compiles) a 'clean' ISA driver.
Hopefully PCI/PCCARD/etc. support will be added when I understand it.
Unlike the old version this just creates a module. The old one tried to
create a new kernel with the driver to be tested.
Replace all in-tree uses with necessary subset of <sys/{fb,kb,cons}io.h>.
This is also the appropriate fix for exo-tree sources.
Put warnings in <machine/console.h> to discourage use.
November 15th 2000 the warnings will be converted to errors.
January 15th 2001 the <machine/console.h> files will be removed.
