9600 was a standard baud rate decades ago, but 115200 is now more common
so choose defaults that are useful to the largest number of users.
Note that boot0sio does not support rates above 9600 so it remains
unchanged.
Reviewed by: bz, imp, manu
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D36295
Summary:
This change moves /usr/bin/cpuset to /bin/cpuset so it is more readily
available on hosts where the /usr partition might not be mounted at the
time / has been mounted.
Remove some complexity from rc.subr(8) since /bin is assumed to always
be present if/when / is mounted.
MFC after: 2 weeks
MFC with: 0661f93892, 271d552379af
Test Plan:
- Test out rc.subr change.
- Confirm that the installation logic does what's needed.
Relnotes: yes (moving cpuset may impact strict file permissions/mode checking)
Reviewers: kevans
Subscribers: imp
Differential Revision: https://reviews.freebsd.org/D40057
This better reflects the intent that this directory is indexed by kld
name and removes a conflict with D32128 which aims to split sysctl.conf.
Reviewed by: kevans imp
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D41043
For kernel modules loaded by scripts in /etc/rc.d and
/usr/local/etc/rc.d, if there is a file in /etc/sysctl.conf.d named <kld
name>.conf, then this will be loaded using the sysctl(8) utility. For
instance, sysctl variable changes for the pf kernel module would be
placed in the file /etc/sysctl.conf.d/pf.conf.
PR: 272129
Reviewed by: imp freebsd_igalic.co
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D40886
In 3693d9140e /etc/rc switched to using
find_system_scripts rather than directly including /etc/rc.d/* in the
list of scripts to run in order to skip .pkgsave files. Follow suit
in etc/rc.d/routing.
Sponsored by: DARPA
We have somewhat twisted logic to determine actions for dumpdev
considering three sources of information:
* kenv "dumpdev" tunnable supposed to point to specific device;
* /etc/defaults/rc.conf "dumpdev" variable;
* /etc/rc.conf that may be unset or set to "NO", "AUTO" or device name.
For CURRENT without any setting in kenv or /etc/rc.conf
the default is "AUTO". For STABLE branches the default is "NO".
Current implementation breaks for STABLE branches if kenv points
to specific device but /etc/rc.conf does not set "dumpdev" at all.
Let us fix it commenting out "dumpdev" in /etc/defaults/rc.conf
for STABLE branches and making the code to consult kenv
if "dumpdev" is not set elsewhere.
MFC-after: 1 month
There was a mistake in the previous commit, it used the incorrect
spelling of the FIB variable name and was not functional
Also corrects an issue with the IPv6 default route variable name.
Fixes: 30659d1dcb ("Add support for adding default routes for other FIBs")
Sponsored-by: ScaleEngine Inc.
Differential Revision: https://reviews.freebsd.org/D37685
In case of source upgrade path from 12.x proper merge of new /etc
installs /etc/motd.template. Becase of that, the system in left
without symlink /etc/motd -> /var/run/motd but with stale /etc/motd contents.
Fix it creating symlink despite of presence of /etc/motd.template.
MFC after: 1 week
This reverts commit 1dcb6ad173.
As of "8cb16fdbea6b Restore original frequency on exit.", powerd
restores the original frequency itself.
Further, if the original frequency is not the same as the
first frequency found in the frequency list, then the restoration
done by the powerd_poststop will restore the wrong frequency.
This can happen on Intel machines where Turbo is not enabled,
but the turbo frequency is first in the list of frequencies.
In this case, turbo will be enabled when the user did not want
it to be.
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D40197
Reviewed by: imp, mav
For symmetry with rc.resume, give rc.suspend the ability to execute
rc-scripts. Use the suspend keyword for that.
Use-case is for setting a wake-up time, e.g. via efiwake.
Reviewed by: christos
Approved by: markj (mentor)
Differential Revision: https://reviews.freebsd.org/D39965
The recent changes to the uname(1) command removed trailing spaces for
better POSIX conformance, but it broke the regular expression used by
the motd script which expected it. This commit addresses this by removing
the requirement, as it is no longer present.
Additionally, a recent change in newvers.sh introduced a new format for
uname -v, which omited the build number and build dates to improve
reproducible build support. This commit adds support for this new format.
Reported-by: Jamie Landeg-Jones <jamie@catflap.org>
Reviewed-by: imp
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D40225
The code in rc.d/netif waiting for IPv6 Duplicate Address Detection if
any network interfaces support IPv6. Unfortunately, since lo0 *always*
has IPv6 enabled, this means unconditionally sleeping, even on systems
which have no external IPv6 interfaces.
Since we presume that there is little risk of a duplicate address being
assigned on lo0, amend the test to wait only if there is an interface
*other than lo0* which supports IPv6.
Reviewed by: bz
Differential Revision: https://reviews.freebsd.org/D40141
Summary:
The intention of the original author (I assume) was to add this logic
for testing. This removes the debug statement so it no longer shows up
in calls to `status`.
MFC after: 2 weeks
MFC with: 0661f9389
Reviewers: kevans
Subscribers: imp
Differential Revision: https://reviews.freebsd.org/D40055
The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch
up to that fact and revert to their recommended match of BSD-2-Clause.
Discussed with: pfg
MFC After: 3 days
Sponsored by: Netflix
If ${name}_cpuset is specified (and /usr is mounted), cpuset(1) will be
run to limit the service to the configured cpuset.
PR: 142434
Reviewed by: kevans
Drivers like ath1[012]k will not match the current wlans_*-regex as
they have digits followed by letters. Adjust the regex to allow
this combination in order to be able to configure interfaces with
names like wlans_ath11k0="..."
MFC after: 3 days
Reviewed by: emaste
Differential Revision: https://reviews.freebsd.org/D39674
bfb202c455 addresses the CTRL-EVENT-SCAN-FAILED. Upstream d807e289d
caused FreeBSD regression in driver_bsd.c, which this rc.d patch
worked around. As of bfb202c455 this workaround is no longer needed.
Reviewed by: bz (for wireless)
MFC after: 10 days
X-MFC with: bfb202c455
Differential Revision: https://reviews.freebsd.org/D39257
Now that commit cbbb22031f is in main,
it is possible to run nfsd(8), nfsuserd(8), mountd(8),
gssd(8) and rpc.tlsservd(8) in an appropriately configured vnet
prison if the "allow.nfsd" option is specified in jail.conf.
This patch fixes the rc scripts for this.
Mostly just replaces the "nojail" KEYWORD with "nojailvnet",
but also avoids setting vfs.nfsd.srvmaxio in a prison, since it
must be set outside of the prisons and applies to all
nfsd(8) instances.
Reviewed by: jamie
MFC after: 3 months
Differential Revision: https://reviews.freebsd.org/D38809
rc.d/hostid_save saves a UUID generated by rc.d/hostid in /etc/hostid.
Store the same UUID, without hyphens, in /etc/machine-id. The hypĥens
are removed with a shell function because hostid_save runs before file
systems are mounted so other tools may not be available yet.
This eliminates some duplication between hostid and machine-id and for
virtual machines machine-id now contains the UUID configured in the
hypervisor like it does on Linux.
Reviewed by: delphij
Discussed with: bapt
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D38811
The growfs_fstab script has been testing dumpdev, and if it is AUTO,
enables dumps on the newly-added swap device for the initial boot.
However, dumpdev defaults to AUTO on main, but NO on stable/13 and
release branches. On the other hand, bsdinstall adds dumpdev="AUTO"
by default (controlled by a menu item). bsdinstall is not used when
booting an SD card or other disk image. Adopt the default from
bsdinstall, and set dumpdev to AUTO in /etc/rc.conf in the
growfs_fstab script if a swap partition has been added, along with
the explanatory comment added by bsdinstall.
Differential Revision: https://reviews.freebsd.org/D38751
The cleanvar script uses find -delete to remove stale files under /var,
which could lead to unwanted removal of files in some unusual scenarios.
For example, when a mounted fdescfs(5) is present under /var/run/samba/fd,
find(1) could descend into a directory that is out of /var/run and remove
files that should not be removed.
To mitigate this, modify the script to use find -x, which restricts the
find scope to one file system only instead of descending into mounted
file systems.
PR: 269213
MFC after: 1 week
Changing cursor, screenmap and setting blanktime doesn't work when booted
with vt(4) and UEFI so add a special case for those depending on machdep.bootmethods.
I have no way to test if this can work with vt(4) and bios boot so just in case
keep calling those for this.
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D38293
Make it possible to not run utx at boot.
Default to yes so this is a no-op for everyone.
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D38292
And put in it:
- kbdcontrol
- vidcontrol
- moused
- kbdmap
Those aren't useful in a jail or for a modern desktop.
While here, split the devd.conf part into some new files.
Reviewed by: bapt
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D38321
- awk sometimes formatted swapbase as floating point, which gpart
does not accept; force int.
- Fix typo in code for checking vm.max_swap_pages.
- While here, do not set kernel env if "gpart add" fails.
- Add "gpart show" before modification to verbose output.
Reported by: marklmi at yahoo dot com
Tested by: marklmi at yahoo dot com
When setting up carp tunnel, using a password consisting of only the
characters used as hexadecimal characters, i.e. abc-def, there will be
an infinite loop in the shell function ifalias_af_common_handler().
To circumvent this we test for " pass ".
PR: 268378
Reported by: jyoung15@gmail.com
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D37748
"[[:space:]]" is easier to read than "\ " and is conisitent with
clone_up().
Reported by: eugen
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D37748
This new default-enabled rc will generate a /etc/machine-id file if it
does not exist, and pre-fill it with a newly generated UUID of version 4
[2].
The file is generated in /var/db/machine-id and symlinked to
/etc/machine-id to allow for read-only root partitions.
This file is amongst other things used by libraries like GLib.
Bump FreeBSD version 1400076 to be able to easily add support for older
version of FreeBSD via a package.
[1] Linux machine-id(5): https://www.man7.org/linux/man-pages/man5/machine-id.5.html
[2] f176fe8e7f
Approved by: bapt
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D37722