Introduce the SIOC[SG]IFGENERIC hooks that can be used to pass an
arbritrary ioctl subcommand into an interface driver. Surprisingly
enough, there was no provision for this already present (except of the
option of abusing SIOC[SG]IFMEDIA for this).
The idea is that an interface driver can establish ioctl subcommands
of its own that can't be meaningfully interpreted by the upper layer
interface ioctl function. Something like this is required to
implement a clean solution of passing down things like CHAP secrets or
PPP options to the /sys/net/if_sppp* files. (Yes, my CHAP is now
finally working with it, but i gotta update my kernel to the new
callout interface before being able to commit _that_.)
Reviewed by: peter [long ago, actually]
arbritrary ioctl subcommand into an interface driver. Surprisingly
enough, there was no provision for this already present (except of the
option of abusing SIOC[SG]IFMEDIA for this).
The idea is that an interface driver can establish ioctl subcommands
of its own that can't be meaningfully interpreted by the upper layer
interface ioctl function. Something like this is required to
implement a clean solution of passing down things like CHAP secrets or
PPP options to the /sys/net/if_sppp* files. (Yes, my CHAP is now
finally working with it, but i gotta update my kernel to the new
callout interface before being able to commit _that_.)
Reviewed by: peter [long ago, actually]
This driver includes the following patches submitted by:
1.0 Hideyuki Suzuki <hideyuki@sat.t.u-tokyo.ac.jp>
Japanese Cable support
2.0 Keith Sklower <sklower@CS.Berkeley.EDU>
Minor update to the BSDI section so it compiles cleanly on BSDI
3.0 Joao Carlos Mendes Luis <jonny@coppe.ufrj.br>
ioctl interface to select video format , NTSC, PAL, etc...
of the system to be rebuilt anyway, this is a good time to introduce
LOG_NTP.
The reasoning for a separate facility is that xntpd can sometimes
cause exaggerative log message at high prioritites which are,
depending on your environment and available clock sources, not
necessarily as important as other LOG_DAEMON messages. However, they
used to clutter log files and system console in the existing setup.
Note that this situation could not be resolved using the !xntpd option
(think about it).
xntpd(8) is supposed to automatically pick up the change, it had
already all necessary #ifdef's.
The chosen value does, as far as my inquiries yielded, not clash with
any other operating system.
pointy hat last? :-]
When one is selecting (or polling) for write, it helps if we use the
write side of the pipe when requesting wakeups instead of the read side.
This broke ghostview (at least) - I'm suprised it wasn't noticed for
so long.
Reviewed by: Greg Lehey <grog@lemis.com>
- CPU_CYRIX_NO_LOCK enables weak locking. If this option is not set and
FAILESAFE is defined, NO_LOCK bit of CCR1 is cleared.
- CPU_WT_ALLOC enables write-through allocation.
sysctl option 'fakes' like a card was removed and inserted when the
machine is brought up again from a suspend. It is disabled by default,
and the old code is used.
Obtained from: PAO
speaker. Cirrus Logic PCIC chips must enable this. There is also a Low
Power Dynamic Mode bit that claims to reduce power consumption by 30%,
so enable it and hope for the best.
PR: 4650
Submitted by: Nick Sayer <nsayer@quack.kfu.com>
instead of the first available, like Win95 does. This appears to help
on some machines, and avoids potential problems with built-in serial
ports which tend to live at IRQ 3, which is usually picked with the
old method.
in a P6 SMP system. Some MB bios'es don't set the registers up correctly
for the AP's. Additionally, set the memory between 0xa0000 and 0xbffff
as write combining.
savers are also modified so that they behave in the same way as the
blank saver on MDA and CGA, although it's not the way these screen
savers are supposed to work, but fading monitor and tickling green
monitor cannot be done on MDA and CGA, AFAIK. So, this is the second
best solution.
As of this change, the current state of support of screen savers is
summarized in the following table.
MDA CGA EGA VGA
blank OK OK NA OK
daemon OK OK OK OK
fade * * NA OK
green * * NA OK
snake OK OK OK OK
star OK OK OK OK
OK: works
NA: doesn't work, the module cannot be loaded for this adapter.
*: behave the same way as the blank saver.
As you can see, EGA is left out for now. But, we can do no better, as
EGA registers cannot be read...
Reviewed by: sos
shown to be harmful in that it results in the card not being detected
properly on warmboot due to the station address failing to be read
correctly from the NVRAM.
RST's being ignored, keeping a connection around until it times out, and
thus has the opposite effect of what was intended (which is to make the
system more robust to DoS attacks).
much like the scancode mode.
However the keys that (for no good reason) returns extension codes
etc, are translated into singlebyte codes.
Needed by libvgl. This makes life ALOT easier, also the XFree86
folks could use this.
overruns (not that it was a problem, but it could be):
1) Doubled the number of receive buffers in the DMA chain to 64.
2) Do packet receive processing before transmit in the interrupt routine.
if it is in 10Mbps mode and gets certain types of garbage prior to
the packet header. The work-around involves reprogramming the
multicast filter if nothing is received in some number of seconds
(currently set at 15). As a side effect, implemented complete support
for multicasting rather than the previous 'receive all multicasts'
hack, since we now have the ability to program the filter table.
Fixed a serious bug which crept in with the timeout() changes;
the cookie was only saved on the first timeout() call in fxp_init()
and wasn't updated in the most common place in fxp_stats_update()
when the timeout was rescheduled. This bug would have resulted in
an eventual panic if fxp_stop() was called (which happens when any
interface flags are changed, for example).
Fixed a bug in Alpha support that would have caused the TxCB
descriptor chain to span a page boundry, causing serious problems
if the pages didn't happen to be contiguous.
Removed some gratuitous bit masking that was left over from an
older implementation.
Fixed a bug where too much was copied from the configuration
template, spilling over into memory that followed it.
Fixed handling of if_timer...it was cleared too early in some cases.
It seems I didn't count my 0's properly when adding the new masks into
icu_vector.s pushing SWI_AST_MASK off the end of the array and screwing
up the indexing for SWI_CLOCK_MASK.
Fix the bug icu_vector.s and also reformat the code in both icu_vector.s and
apic_vector.s so that it will be much harder to make the same mistake in
the future.
Submitted by: Bruce Evans <bde@zeta.org.au>
machine generates an NMI for each floating point error, just like an old XT.
Since it is ISA only, reading the EISA status port yields 0xff, which would
give a spurious EISA panic. The simplest thing to do is to ignore the 0xff.
