- <netipx> headers [1]
- IPX library (libipx)
- IPX support in ifconfig(8)
- IPXrouted(8)
- new MK_NCP option
New MK_NCP build option controls:
- <netncp> and <fs/nwfs> headers
- NCP library (libncp)
- ncplist(1) and ncplogin(1)
- mount_nwfs(8)
- ncp and nwfs kernel modules
User knobs: WITHOUT_IPX, WITHOUT_IPX_SUPPORT, WITHOUT_NCP.
[1] <netsmb/netbios.h> unconditionally uses <netipx> headers
so they are still installed. This needs to be dealt with.
w/ non-zero data, and it turns out we don't... This is really optimized
zero filled on demand, or pages that were already zero'd for us...
MFC after: 3 days
if the target is a fifo. After opening a trace file, check that it is a
regular file, and if not, return an error.
MFC after: 3 days
Reported by: kris
PR: 94278
(I'm not using GPL, but I still think there are good
ideas in the GNU projects. ;-) Among other things,
this should make it easier for clients of bsdtar to
recognize it automatically:
bsdtar --version | grep bsdtar
in usr.bin/login because the login.access feature has
moved to PAM completely.
Their counterparts in lib/libpam/modules/pam_login_access
have been found to be in sync with, and even in better shape
than, login.access.5 and login_access.c here.
Therefore cvs rm login.access.5 and login_access.c from
usr.bin/login so that nobody will waste their time on fixing
or developing the files here.
MFC after: 3 days
after tty entry by one space in order to provide extra spaces for
the tty entry. As a result, full pts names are now visible (up
to 999 pts's anyway):
Before:
Login Name TTY Idle Login Time Office Phone
robert Robert Watson *v0 3:55 Fri 02:54
robert Robert Watson p0 19 Sat 11:01
robert Robert Watson pts Sat 14:55
After:
Login Name TTY Idle Login Time Office Phone
robert Robert Watson *v0 5:08 Fri 02:54
robert Robert Watson p0 8 Sat 11:01
robert Robert Watson pts/5 Sat 14:55
MFC after: 1 week
chdir(), be sure to undo the effects of the chdir before continuing.
Without this, after hitting a directory with mode 0111 (for example),
tar will get lost, and won't add any yet unvisted files to your
archive. (Or possibly add the wrong files, I suppose...)
Reviewed By: kientzle@
Apparently with the new pts code stalled entries are printed, when they are
not with the BSD ptys.
Submitted by: Michal Mertl <mime at traveller dot cz>
3 columns were wasted at the left, except these columns were used to
make the header line up. Now there is no space on the same line for
the "Proc:" part of the header. Try putting this on the line above
although it clutters that line (there is already similar clutter for
the "Interrupts" header). Leave 1 column between these fields. With
the above and a previous change there is enough of space for this.
Use 5 columns instead of 3 for the number of users since 3 is not quite
enough and there was space to spare. This also fixes an off-by-2 error
in a previous fix forthe column count in the comment on STATROW.
Move all the pager fields 1 to the right so that the "count" and "pages"
descriptors more clearly apply to the pager fields and not the memory
fields. There was space to space.
Waste some of the spare space at the right of the pager fields to expand
all the pager field widths to their old values (but now with a column
between the fields). There are fields more in need of expansion but most
of them are not in places near spare space.
made it unnecessary. (Rev.1.6 had to reduce the field width to 4, and
changed 100.0 and preposterous larger values down to 99.9 since 100.0
wouldn't have fitted. Rev.1.35 handles precentages > 99.9 well enough by
changing the format to %.0f when the string given by the initial format
is too wide.)
Even with this change, during short testing I've never seen a percentage
of 100 being displayed by systat -v, although top(1) displays percentages
of 100 user or 100 idle for similar loads.
Always use snprintf()'s return value, since discarding it is a style
bug at best and using it here gives slightly simpler code and better
error checking. Use snprintf() in putlongdouble() the same as in
putfloat(). (1.25 changed most sprintf()'s to snprintf()'s to fix
non-bugs without changing the logic to use the result of snprintf();
1.27 restored one of the sprintf()s by cloning a stale version of
putfloat().)
Don't print a too-long field in the unlikely case that the fallback
to M units in putint() leaves the field still too long. (The fallback
to printing stars was lost in rev.1.58 when the fallback to M units
was added.)
cannot run into other fields or field descriptors. If the value is
too large to fit in the field width, then the output format is adjusted
so that the value (usually) fits, but with fields running together
externally this adjustment usually didn't help. Mostly it doesn't
matter to lose 1 digit of precision, but switching the output format
is bad if it happens often or gives bogus units. The loss of width
is most serious for fields near "Csw" (which are also the ones which
must often ran together) since these have a high variance and large
values relative to the possible field widths so the switch occurs more
often now, and for the memory size fields where the switch gives the
bogus units kKB or MKB.
Now only the fields for r, p, d, s and w can run into each other.
These fields have width 3, and 3 cannot be reduced to 2 without losing
all precision when the value is between 100 and 999.
Trim "pdwake" to "pdwak" at think time now that it doesn't get clobbered
at runtime. The manpage doesn't need to be changed for this because
it documents the clobbered descriptor, unlike for 4 other too-long
descriptors which only get clobbered if there are lots of interrupt
sources.
Trim "% busy" to "%busy" since most other descriptors for percentages
are spelled without the space and this change makes changing the widths
of the %busy fields unnecessary.
around PUTRATE() because PUTRATE() only looked like a function -- it was
multiple statements. Use "do {...} while(0)" as usual in PUTRATE() so
that it is a single statement that can be used like a function.
large. In most cases it is still 1 too large, so fields tend to run
together, but in the following cases it was more than 1 too large, and
the starting column was too small too, so the field started inside the
previous field or descriptor and clobbered that:
- "wire": the number for this overwrote 2 characters of the number for
"Flt". Reduce the field width by 3 (2 to avoid the overwrite and 1
so that the fields don't run together). This was already done for
the preceding number for "cow".
- "inact": the number for this overwrote 1 character of the descriptor
"Idle". Reducing the field width by 2 is enough.
- "cache:" the number for this overwrote 3 characters of the scale
"...| |". The field width should be reduced by 4 to keep things
from running together, but that is a lot and not so necessary here
since the final "|" in the scale serves as a delimiter. Only reduce
it by 3.
- "free": the number for this overwrote 2 characters of the bar graph.
The character position under the final "|" in the scale is apparently
not used, so reducing the field width by 3 is enough.
When "zfod" is in the main vmstat display:
- use the normal field width of 9 (not 5) for it since there is no shortage
of space. Fix style bugs (excessive {}) in the statement that
conditionally writes it.
Write all reduced field widths for vmstat fields as "9 - <reduction>" as
a hint that we don't want to reduce them.
number in more cases by stealing 2 characters from the count field to
give more space in the descriptor field, but it did the column adjustments
for this strangely using an off-by-2 error in the base column and
compensating off-by-2 errors in 6 offsets from the base column (4 new
errors and 2 from not changing the offsets that actually changed).
Print the "Interrupts" header directly at its offset from the base column
instead of spacing it half using the offset and half by printing a space
character.
current tab, however the code it replaced wanted to round to the
next TAB. Consequently things like this:
( echo 1 ; echo 2 ) | column
cause column to loop indefinitely. This patch is slightly different
from the one Gary submitted, but is closer to the original code.
Submitted by: Gary Cody <gary@lyranthe.org>
MFC after: 1 week
events. The specifics of submitting the records is contained within
login_audit.c.
Document the auditing behavior in the man page.
Obtained from: TrustedBSD Project, Apple Computer, Inc.
Approved by: rwatson (mentor)
