functional state. While CTL is much more superior target from all points,
there is no reason why this code should not work.
Tested with ahc(4) as target side HBA.
MFC after: 2 weeks
This is a significant rewrite of much of the previous driver; lots of
misc. cleanup was also performed, and support for a few other minor
features was also added.
- Allow the Rx/Tx queue sizes to be configured by tunables
- Bail out earlier if the Tx queue unlikely has enough free
descriptors to hold the frame
- Cleanup some of the offloading capabilities handling
As promised, drop the option to make the older GNU patch
the default.
GNU patch is still being built but something drastic may
happen to it to it before Release.
This removes the WITH_BSDCONFIG description alltogether, since this option
is removed.
At the same time, fix the WITHOUT_LIBCPLUSPLUS option that had gotten
inverted.
There are now six additional variables
weekly_status_security_enable
weekly_status_security_inline
weekly_status_security_output
monthly_status_security_enable
monthly_status_security_inline
monthly_status_security_output
alongside their existing daily counterparts. They all have the same
default values.
All other "daily_status_security_${scriptname}_${whatever}"
variables have been renamed to "security_status_${name}_${whatever}".
A compatibility shim has been introduced for the old variable names,
which we will be able to remove in 11.0-RELEASE.
"security_status_${name}_enable" is still a boolean but a new
"security_status_${name}_period" allows to define the period of
each script. The value is one of "daily" (the default for backward
compatibility), "weekly", "monthly" and "NO".
Note that when the security periodic scripts are run directly from
crontab(5) (as opposed to being called by daily or weekly periodic
scripts), they will run unless the test is explicitely disabled with a
"NO", either for in the "_enable" or the "_period" variable.
When the security output is not inlined, the mail subject has been
changed from "$host $arg run output" to "$host $arg $period run output".
For instance:
myfbsd security run output -> myfbsd security daily run output
I don't think this is considered as a stable API, but feel free to
correct me if I'm wrong.
Finally, I will rearrange periodic.conf(5) and default/periodic.conf
to put the security options in their own section. I left them in
place for this commit to make reviewing easier.
Reviewed by: hackers@
kld_unload event handler which gets invoked after a linker file has been
successfully unloaded. The kld_unload and kld_load event handlers are now
invoked with the shared linker lock held, while kld_unload_try is invoked
with the lock exclusively held.
Convert hwpmc(4) to use these event handlers instead of having
kern_kldload() and kern_kldunload() invoke hwpmc(4) hooks whenever files are
loaded or unloaded. This has no functional effect, but simplifes the linker
code somewhat.
Reviewed by: jhb
configure sa(4) to request no I/O splitting by default.
For tape devices, the user needs to be able to clearly understand
what blocksize is actually being used when writing to a tape
device. The previous behavior of physio(9) was that it would split
up any I/O that was too large for the device, or too large to fit
into MAXPHYS. This means that if, for instance, the user wrote a
1MB block to a tape device, and MAXPHYS was 128KB, the 1MB write
would be split into 8 128K chunks. This would be done without
informing the user.
This has suboptimal effects, especially when trying to communicate
status to the user. In the event of an error writing to a tape
(e.g. physical end of tape) in the middle of a 1MB block that has
been split into 8 pieces, the user could have the first two 128K
pieces written successfully, the third returned with an error, and
the last 5 returned with 0 bytes written. If the user is using
a standard write(2) system call, all he will see is the ENOSPC
error. He won't have a clue how much actually got written. (With
a writev(2) system call, he should be able to determine how much
got written in addition to the error.)
The solution is to prevent physio(9) from splitting the I/O. The
new cdev flag, SI_NOSPLIT, tells physio that the driver does not
want I/O to be split beforehand.
Although the sa(4) driver now enables SI_NOSPLIT by default,
that can be disabled by two loader tunables for now. It will not
be configurable starting in FreeBSD 11.0. kern.cam.sa.allow_io_split
allows the user to configure I/O splitting for all sa(4) driver
instances. kern.cam.sa.%d.allow_io_split allows the user to
configure I/O splitting for a specific sa(4) instance.
There are also now three sa(4) driver sysctl variables that let the
users see some sa(4) driver values. kern.cam.sa.%d.allow_io_split
shows whether I/O splitting is turned on. kern.cam.sa.%d.maxio shows
the maximum I/O size allowed by kernel configuration parameters
(e.g. MAXPHYS, DFLTPHYS) and the capabilities of the controller.
kern.cam.sa.%d.cpi_maxio shows the maximum I/O size supported by
the controller.
Note that a better long term solution would be to implement support
for chaining buffers, so that that MAXPHYS is no longer a limiting
factor for I/O size to tape and disk devices. At that point, the
controller and the tape drive would become the limiting factors.
sys/conf.h: Add a new cdev flag, SI_NOSPLIT, that allows a
driver to tell physio not to split up I/O.
sys/param.h: Bump __FreeBSD_version to 1000049 for the addition
of the SI_NOSPLIT cdev flag.
kern_physio.c: If the SI_NOSPLIT flag is set on the cdev, return
any I/O that is larger than si_iosize_max or
MAXPHYS, has more than one segment, or would have
to be split because of misalignment with EFBIG.
(File too large).
In the event of an error, print a console message to
give the user a clue about what happened.
scsi_sa.c: Set the SI_NOSPLIT cdev flag on the devices created
for the sa(4) driver by default.
Add tunables to control whether we allow I/O splitting
in physio(9).
Explain in the comments that allowing I/O splitting
will be deprecated for the sa(4) driver in FreeBSD
11.0.
Add sysctl variables to display the maximum I/O
size we can do (which could be further limited by
read block limits) and the maximum I/O size that
the controller can do.
Limit our maximum I/O size (recorded in the cdev's
si_iosize_max) by MAXPHYS. This isn't strictly
necessary, because physio(9) will limit it to
MAXPHYS, but it will provide some clarity for the
application.
Record the controller's maximum I/O size reported
in the Path Inquiry CCB.
sa.4: Document the block size behavior, and explain that
the option of allowing physio(9) to split the I/O
will disappear in FreeBSD 11.0.
Sponsored by: Spectra Logic
with rmlocks. This works only with non-sleepable rm because handlers run
in SWI context. While here, document the new KPI in the timeout(9)
manpage.
Requested by: adrian, scottl
Reviewed by: mav, remko(manpage)
Notable new features:
* Elliptic Curve Digital Signature Algorithm keys and signatures in
DNSSEC are now supported per RFC 6605. [RT #21918]
* Introduces a new tool "dnssec-verify" that validates a signed zone,
checking for the correctness of signatures and NSEC/NSEC3 chains.
[RT #23673]
* BIND now recognizes the TLSA resource record type, created to
support IETF DANE (DNS-based Authentication of Named Entities)
[RT #28989]
* The new "inline-signing" option, in combination with the
"auto-dnssec" option that was introduced in BIND 9.7, allows
named to sign zones completely transparently.
Approved by: delphij (mentor)
MFC after: 3 days
Sponsored by: DK Hostmaster A/S
existing examples to not pass an mbuf as a probe argument. There's no
obvious reason to have it there, and it doesn't really jibe with the example
added in this revision.
MFC after: 1 week
- Note that WORLD_FLAGS and KERNEL_FLAGS set the number of
make(1) jobs only on SMP-capable systems.
MFC after: 3 days
X-MFC-With: r254224
X-MFC-To: stable/9, releng/9.2
extensions and also tried to be link time compatible with ports libiconv.
This splits that functionality and enables the parts that shouldn't
interfere with the port by default.
WITH_ICONV (now on by default) - adds iconv.h, iconv_open(3) etc.
WITH_LIBICONV_COMPAT (off by default) adds the libiconv_open etc API, linker
symbols and even a stub libiconv.so.3 that are good enough to be able
to 'pkg delete -f libiconv' on a running system and reasonably expect it
to work.
I have tortured many machines over the last few days to try and reduce
the possibilities of foot-shooting as much as I can. I've successfully
recompiled to enable and disable the libiconv_compat modes, ports that use
libiconv alongside system iconv etc. If you don't enable the
WITH_LIBICONV_COMPAT switch, they don't share symbol space.
This is an extension of behavior on other system. iconv(3) is a standard
libc interface and libiconv port expects to be able to run alongside it on
systems that have it.
Bumped osreldate.
called after the module has been loaded, and the unload handlers are called
before the module is unloaded. Moreover, the module unload handlers may
return an error to prevent the unload from proceeding.
Reviewed by: avg
MFC after: 2 weeks
Release Engineering Team as of 9.2-RELEASE.
- Document that a cross-build release is possible by setting the
TARGET and TARGET_ARCH variables.
- Include an example of using release.sh with and without the
optional configuration file.
- Document the supported release.sh configuration file variables.
- Update the 'cdrom' target output file to disc1.iso.
- Update the 'memstick' target output file to memstick.img.
- Add attributions for the last major updates to this manual page.
- Fix some mdoc(7) style nits:
- Sentences should begin on a new line
- Use .Pq to enclose full lines in parenthesis
random_adaptor is basically an adapter that plugs in to random(4).
random_adaptor can only be plugged in to random(4) very early in bootup.
Unplugging random_adaptor from random(4) is not supported, and is probably a
bad idea anyway, due to potential loss of entropy pools.
We currently have 3 random_adaptors:
+ yarrow
+ rdrand (ivy.c)
+ nehemeiah
* Remove platform dependent logic from probe.c, and move it into
corresponding registration routines of each random_adaptor provider.
probe.c doesn't do anything other than picking a specific random_adaptor
from a list of registered ones.
* If the kernel doesn't have any random_adaptor adapters present then the
creation of /dev/random is postponed until next random_adaptor is kldload'ed.
* Fix randomdev_soft.c to refer to its own random_adaptor, instead of a
system wide one.
Submitted by: arthurmesh@gmail.com, obrien
Obtained from: Juniper Networks
Reviewed by: so (des)
