This class is used for detecting volume labels on file systems:
UFS, MSDOSFS (FAT12, FAT16, FAT32) and ISO9660.
It also provide native labelization (there is no need for file system).
g_label_ufs.c is based on geom_vol_ffs from Gordon Tetlow.
g_label_msdos.c and g_label_iso9660.c are probably hacks, I just found
where volume labels are stored and I use those offsets here,
but with this class it should be easy to do it as it should be done by
someone who know how.
Implementing volume labels detection for other file systems also should
be trivial.
New providers are created in those directories:
/dev/ufs/ (UFS1, UFS2)
/dev/msdosfs/ (FAT12, FAT16, FAT32)
/dev/iso9660/ (ISO9660)
/dev/label/ (native labels, configured with glabel(8))
Manual page cleanups and some comments inside were submitted by
Simon L. Nielsen, who was, as always, very helpful. Thanks!
your (network) modules as well as any userland that might make sense of
sizeof(struct ifnet).
This does not change the queueing yet. These changes will follow in a
seperate commit. Same with the driver changes, which need case by case
evaluation.
__FreeBSD_version bump will follow.
Tested-by: (i386)LINT
/usr/local/www
[1] Semi-arbitrary cutoff, but I didn't want to add every locale directory
used by ports, because a lot are only used by one or two, and it's less
intrusive for these ports to just clean up after themselves.
MFC after: 2 days
as these ioctl's aren't MD. This also means they are installed in
/usr/include/dev/bktr now. Also provide compatability wrappers for
where these headers lived in 4.x.
It currently supports the PMC Sierra Lite, Ultra and 622 chips and
the IDT 77105. The driver handles media options and state in a consistent
manner for ATM drivers. The next commit to the midway driver will make
it use utopia.
but it's no longer a part of the base-system and buildworld works fine
here after deleting them both on disk and from the mtree spec files.
Not objected to by: kris, silence on -audit
under way to move the remnants of the a.out toolchain to ports. As the
comment in src/Makefile said, this stuff is deprecated and one should not
expect this to remain beyond 4.0-REL. It has already lasted WAY beyond
that.
Notable exceptions:
gcc - I have not touched the a.out generation stuff there.
ldd/ldconfig - still have some code to interface with a.out rtld.
old as/ld/etc - I have not removed these yet, pending their move to ports.
some includes - necessary for ldd/ldconfig for now.
Tested on: i386 (extensively), alpha
which needs an empty directory into which to chroot(2).
Hint to the operator that this directory really _should_ be empty
by creating it with mode 0555 and the system immutable flag (schg)
set.
Reviewed by: des
the creation of /var/spool/clientmqueue and therefore the need for the
smmsp user and group if NO_SENDMAIL is defined. This required breaking out
the creation of the directory into a new BSD.sendmail.dist mtree file.
MFC after: 1 week
Install sys/<arch>/include/pc/*.h to /usr/include/machine/pc/.
PR: docs/29534
Install sys/netatm/*/*.h to /usr/include/netatm/*/.
Don't install compatibility symlinks for <machine/soundcard.h>
and <machine/joystick.h>. Three years is enough to be aware of
the change, and these weren't visible in the SHARED=symlinks
case.
Back out include/Makefile,v 1.160 that was a null change anyway
due to the bug in the path, and we now don't want to install
these headers because they would otherwise be invisible in the
SHARED=symlinks case.
Don't install IPFILTER headers. Userland utilities fetch them
directly, and they were not visible in the SHARED=symlinks case.
Resurrect SHARED=symlinks in Makefile.inc1.
PR: bin/28002
Prodded by: bde
MFC after: 2 weeks
/usr/share/examples/pppd.
Remove the out-of-place pppd(8) configuration files in etc/ppp,
ppp.shells.sample and ppp.deny.
Make the appropriate changes to the build process, etc/Makefile and
etc/mtree/BSD.usr.mtree, so it all works.
The code will be fixed for all known security vulnerabilities,
and a make.conf(5) knob (ENABLE_SUID_MAN) will be provided for
those who still want it installed setuid for whatever reasons.
The catpaging and setuidness features of man(1) combined make
it vulnerable to a number of security attacks. Specifically,
it was possible to overwrite system catpages with arbitrarily
contents by either setting up a symlink to a directory holding
system catpages, or by writing custom -mdoc or -man groff(1)
macro packages and setting up GROFF_TMAC_PATH in environment
to point to them. (See PR below for details).
This means man(1) can no longer create system catpages on a
regular user's behalf. (It is still able to if the user has
write permissions to the directory holding catpages, e.g.,
user's own manpages, or if the running user is ``root''.)
To create and install catpages during ``make world'', please
set MANBUILDCAT=YES in /etc/make.conf. To rebuild catpages
on a weekly basis, please set weekly_catman_enable="YES" in
/etc/periodic.conf.
PR: bin/32791
a packed array so sizeof work. This broke RFMON mode and passing
up 802.11 packets.
The Linux emulation code was derived from the open source Linux driver to
maintain compatibility.
LEAP support is added, hints from Richard Johnson. I've verified this
locally with PC350v42510.img firmware. More bug fixing from Marco to
fix long passwords.
Change DELAYs in flash part of driver to FLASH_DELAY which uses tsleep
so it doesn't look like your system died during a flash update.
Install header files in /usr/include/dev/an
Cleanup some ifmedia bugs add "Home" key mode to ifmedia and ancontrol.
This way you can manage 2 keys a little easier. Map the home mode into
key 5. Enhance ifconfig to dump the various configured SSIDs. I use
a bunch of different ones and roam between them. Use the syntax similar
to the WEP keys to deal with setting difference SSIDs.
Bump up up the Card capabilities RID since they added 2 bytes to it
in the latest firmware. Thankfully we changed it from a terminal
failure so the card still worked but the driver whined.
Some cleanup patches from Marco Molteni.
Submitted by: Richard Johnson <raj@cisco.com>
Marco Molteni <molter@tin.it>
and myself
Various checks: David Wolfskill <david@catwhisker.org>
Reviewed by: Brooks Davis <brooks@freebsd.org>
Warner Losh <imp@freebsd.org>
Approved by: Brooks Davis <brooks@freebsd.org>
Warner Losh <imp@freebsd.org>
Obtained from: Linux emulation API's from Aironet driver.
LC_MESSAGES related data was installed to <locale>/LC_MESSAGES file.
Now it go to <locale>/LC_MESSAGES/SYS_LC_MESSAGES file. LC_MESSAGES
directory is supposed to be storage of message catalogs of userland tools.
This should allow us to avoid many potential problems with future
libintl related functionality introduction.
Thanks for useful suggestions about correct way how to replace plain
files with directories at installworld stage to: Ruslan Ermilov <ru>
of /etc/daily. Some time later, /etc/daily became a set of periodic(8)
scripts. Now, this evolution continues, and /etc/security has been
broken into periodic(8) scripts to make local customization easier and
more maintainable.
Reviewed by: ru
Approved by: ru
systems were repo-copied from sys/miscfs to sys/fs.
- Renamed the following file systems and their modules:
fdesc -> fdescfs, portal -> portalfs, union -> unionfs.
- Renamed corresponding kernel options:
FDESC -> FDESCFS, PORTAL -> PORTALFS, UNION -> UNIONFS.
- Install header files for the above file systems.
- Removed bogus -I${.CURDIR}/../../sys CFLAGS from userland
Makefiles.
BSDPAN is the collection of modules that provides tighter than ever
integration of Perl into BSD Unix.
Currently, BSDPAN does the following:
o makes p5- FreeBSD ports PREFIX-clean;
o registers Perl modules in the FreeBSD package database with a
package name derived from the module name.
The name is of the form: bsdpan-ModuleName-V.VV.
Anyone interested in where BSDPAN is developing should read Anton's
message to the ports mailling list:
Message-ID: <20010105040828.A26011@heechee.tobez.org>
Submitted by: Anton Berezin <tobez@tobez.org>
it at boot time closer to the way we want it to be in the final version.
* Move the default directory to /var/db/entropy
* Run the entropy saving cron job every 11 minutes. This seems
to be a better default, although still bikeshed material.
* Feed /dev/random some cheesy "entropy" from various commands
and files before the disks are mounted. This gives /dev/random
a better chance of running without blocking early.
* Move the reseeding with previously stored entropy to the point
immediately after the disks are mounted.
* Make the harvesting script a little safer in regards to the
possibility of accidentally overwriting something other
than a regular file.
it can be used to reseed at boot time. This will greatly increase
the chances that there will be sufficient entropy available at
boot time to prevent long delays.
For /etc/rc, remove the vmstat and iostat runs from the attempt
to provide some cheesy randomness if the files fail, since
those programs are dynamically linked, and ldd seems to want
some randomness to do its magic.
Guidance and parameters for this project were provided by
Mark Murray, based on the requirements of the Yarrow
algorithm. Some helpful suggestions for implementation
(including the tip about iostat and vmstat) were provided
by Sheldon Hearn. All blame for problems or mistakes is
mine of course.
