When dhclient first starts, if an old IP address exists in the
dhclient.leases file, dhclient(8) sends early DHCPREQUEST message(s)
in an attempt to re-obtain the old IP address again. These messages
contain the old IP as a requested-IP-address option in the message
body (correct) but also use the old IP address as the packet's source
IP (incorrect).
RFC2131 sec 4.1 states:
DHCP messages broadcast by a client prior to that client obtaining
its IP address must have the source address field in the IP header
set to 0.
The use of the old IP as the packet's source address is incorrect if
(a) the computer is now on a different network or (b) it is on the
same network, but the old IP has been reallocated to another host.
Fix dhclient to use 0.0.0.0 as the source IP in this circumstance
without removing any existing functionality. Any previously-used old
IP is still requested in the body of an early DHCPREQUEST message.
PR: 199378
Submitted by: J.R. Oldroyd <fbsd@opal.com>
Reported by: J.R. Oldroyd <fbsd@opal.com>
Reviewed by: cem, asomers, vangyzen
MFC after: 1 week
Sponsored by: Dell EMC
Differential Revision: https://reviews.freebsd.org/D14527
twiddle_pos didn't need to be a module-scope local, since it's going to get
reset with every read anyways- it was left-over from other things.
screen.movecursor with a y=-1 setting was from a test of movecursor,
resulting in the twiddle characters being drawn going up the console and
looking quite funky.
This gives some form of feedback while typing, and matches-(ish*) Forth
behavior. The cursor generally rests two column after the password prompt,
then the twiddle is drawn three columns later and the cursor reset to
resting position after being drawn.
I've removed the note about re-evaluating it for security considerations and
instead set it up as a module-local variable that we can set later depending
on environment or something. It's set to false with no chance of changing at
the moment.
*As close as I can tell from reading check-password.4th, because I don't
have an easy test (or deployed) setup for forth loader to check how close
it is. Please do mention if it's not close enough.
Page daemon threads for other domains show up in ps(1) output as
"pagedaemon/domN", so let that be the case for domain 0 as well.
Submitted by: Kevin Bowling <kevin.bowling@kev009.com>
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D14518
Those operations, zfsctl_snapdir_readdir and zfsctl_snapdir_getattr,
access the filesystem's objset and it can be unstable during operations
like receive and rollback.
MFC after: 2 weeks
There are some _write callbacks left only returning EROFS, replace them
by null_write. return EROFS from null_write().
Reviewed by: cem, imp, kan
Differential Revision: https://reviews.freebsd.org/D14523
nothing - it was checking for ENXIO, which, with devfs, is no longer
returned - and was badly placed anyway, and replaces it with similar
one that works, and is done just before starting getty, instead of being
done when rereading ttys(5).
From the practical point of view, this makes init(8) handle disappearing
terminals (eg /dev/ttyU*) gracefully, without unneccessary getty restarts
and resulting error messages.
Reviewed by: imp@
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D14307
A reservation granule on PowerPC is a cache line.
On e500mc and derivatives a cacheline size is 64 bytes, not 32. Allocate
the maximum size permitted, but only utilize the size that is needed. On
e500v1 and e500v2 the reservation granule will still be 32 bytes.
Chain frames required to satisfy all 2K of declared I/Os of 128KB each take
more then a megabyte of a physical memory, all of which existing code tries
allocate as physically contiguous. This patch removes that physical
contiguousness requirement, leaving only virtual contiguousness. I was
thinking about other ways of allocation, but the less granular allocation
becomes, the bigger is the overhead and/or complexity, reaching about 100%
overhead if allocate each frame separately.
The patch also bumps the chain frames hard limit from 2K to 16K. It is more
than enough for the case of default REQ_FRAMES and MAXPHYS (the drivers will
allocate less than that automatically), while in case of increased MAXPHYS
it will control maximal memory usage.
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D14420
to what other arches (all except riscv and armv4/5) do.
Submitted by: Hyun Hwang <hyun@caffeinated.codes>
Differential Revision: https://reviews.freebsd.org/D14465
After the auth key is copied into the ipad[] array, any remaining bytes
are cleared to zero (in case the key is shorter than one block size).
The full block size was used as the length of the zero rather than the
size of the remaining ipad[]. In practice this overflow was harmless as
it could only clear bytes in the following opad[] array which is
initialized with a copy of ipad[] in the next statement.
Sponsored by: Chelsio Communications
The parameters describe how much of the adapter's memory is reserved for
storing TLS keys. The 'meminfo' sysctl now lists this region of adapter
memory as 'TLS keys' if present.
Sponsored by: Chelsio Communications
* If compiled with EXT_RESOURCES look up the "biu" and "ciu" clocks in
the DT
* Don't use custom property "bus-frequency" but the standard one
"clock-frequency"
* Use the DT property max-frequency and fall back to 200Mhz if it don't exists
* Add more mmc caps suported by the controller
* Always ack all interrupts
* Subclassed driver can supply an update_ios so they can handle update
the clocks accordingly
* Take care of the DDR bit in update_ios (no functional change since we
do not support voltage change for now)
* Make use of the FDT bus-width property
* rk_cru is a cru driver that needs to be subclassed by
the real CRU driver
* rk_clk_pll handle the pll type clock on RockChip SoC, it's only read
only for now.
* rk_clk_composite handle the different composite clock types (with gate,
with mux etc ...)
* rk_clk_gate handle the RockChip gates
* rk_clk_mux handle the RockChip muxes (unused for now)
* Only clocks for supported devices are supported for now, the rest will be
added when driver support comes
* The assigned-clock* property are not handled for now so we rely a lot on the
bootloader to setup some initial values for some clocks.
A memory leak in syslogd for processing of forward actions was
reported. This modification adapts the patch submitted with that bug
to fix the leak. While testing the modification, another leak was also
found and fixed.
PR: 198385
Submitted by: Sreeram <sreeramabs@yahoo.com>
Reported by: Sreeram <sreeramabs@yahoo.com>
Reviewed by: hrs
MFC after: 1 week
Sponsored by: Dell EMC
Differential Revision: https://reviews.freebsd.org/D14510
providing more space for a local buildworld to succeed without
attaching separate disks for /usr/src and /usr/obj.
Reported by: mckusick
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
Unlike the existing GLA2GPA ioctl, GLA2GPA_NOFAULT does not modify
the guest. In particular, it does not inject any faults or modify
PTEs in the guest when performing an address space translation.
This is used by bhyve's debug server to read and write memory for
the remote debugger.
Reviewed by: grehan
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D14075
`iconv_sysctl_add` from `sys/libkern/iconv.c` incorrectly limits the
size of user strings, such that several out of bounds reads could have
been possible.
static int
iconv_sysctl_add(SYSCTL_HANDLER_ARGS)
{
struct iconv_converter_class *dcp;
struct iconv_cspair *csp;
struct iconv_add_in din;
struct iconv_add_out dout;
int error;
error = SYSCTL_IN(req, &din, sizeof(din));
if (error)
return error;
if (din.ia_version != ICONV_ADD_VER)
return EINVAL;
if (din.ia_datalen > ICONV_CSMAXDATALEN)
return EINVAL;
if (strlen(din.ia_from) >= ICONV_CSNMAXLEN)
return EINVAL;
if (strlen(din.ia_to) >= ICONV_CSNMAXLEN)
return EINVAL;
if (strlen(din.ia_converter) >= ICONV_CNVNMAXLEN)
return EINVAL;
...
Since the `din` struct is directly copied from userland, there is no
guarantee that the strings supplied will be NULL terminated. The
`strlen` calls could continue reading past the designated buffer
sizes.
Declaration of `struct iconv_add_in` is found in `sys/sys/iconv.h`:
struct iconv_add_in {
int ia_version;
char ia_converter[ICONV_CNVNMAXLEN];
char ia_to[ICONV_CSNMAXLEN];
char ia_from[ICONV_CSNMAXLEN];
int ia_datalen;
const void *ia_data;
};
Our strings are followed by the `ia_datalen` member, which is checked
before the `strlen` calls:
if (din.ia_datalen > ICONV_CSMAXDATALEN)
Since `ICONV_CSMAXDATALEN` has value `0x41000` (and is `unsigned`),
this ensures that `din.ia_datalen` contains at least 1 byte of 0, so
it is not possible to trigger a read out of bounds of the `struct`
however, this code is fragile and could introduce subtle bugs in the
future if the `struct` is ever modified.
PR: 207302
Submitted by: CTurt <cturt@hardenedbsd.org>
Reported by: CTurt <cturt@hardenedbsd.org>
Reviewed by: jhb, vangyzen
MFC after: 1 week
Sponsored by: Dell EMC
Differential Revision: https://reviews.freebsd.org/D14521
Current timeout behavior is to progress in timeout values from MINTMO to
MAXTMO in MINTMO steps before finally timing out. This results in a fairly
long time before operations finally timeout, which may not be ideal for some
use-cases.
Add MAXWAIT that may be configured along with MINTMO/MAXTMO. If we attempt
to start our send/recv cycle over again but MAXWAIT > 0 and MAXWAIT seconds
have already passed, then go ahead and timeout.
This is intended for those that just want to say "timeout after 180 seconds"
rather than calculate and tweak MINTMO/MAXTMO to get their desired timeout.
The default is 0, or "progress from MINTMO to MAXTMO with no exception."
This has been modified since review to allow for it to be defined via CFLAGS
and doing appropriate error checking. Future work may add some Makefile foo
to respect LOADER_NET_MAXWAIT if it's specified in the environment and pass
it in as MAXWAIT accordingly.
Reviewed by: imp, sbruno, tsoome (all previous version)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D14389
This is motivated by a want to reduce heap usage if the menu is being
skipped. Currently, the menu module must be loaded regardless of whether
it's being skipped or not, which adds a cool ~50-100KB worth of memory
usage.
Move the menu skip logic out to core (and remove a debug print), then check
in loader.lua if we should be skipping the menu and avoid loading the menu
module entirely if so. This keeps our memory usage below ~115KB for a boot
with the menu stripped.
Also worth noting: with this change, we no longer explicitly invoke autoboot
if we're skipping the menu. Instead, we let the standard loader behavior
apply: try to autoboot if we need to, then drop to a loader prompt if not or
if the autoboot sequence is interrupted. The only thing we still handle
before dropping to the loader autoboot sequence is loadelf(), so that we can
still apply any of our kernel loading behavior.
libfdt now provides methods to iterate through subnodes and properties in a
convenient fashion.
Replace our ofw_fdt_{peer,child} searches with calls to their corresponding
libfdt methods. Rework ofw_fdt_nextprop to use the
fdt_for_each_property_offset macro, making it even more obvious what it's
doing.
No functional change intended.
Reviewed by: nwhitehorn
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D14225
We can reach that point with IRQs disabled, and calling ast() with IRQs
disabled can lead to a deadlock.
This should fix the freezes on arm64 under load.
Reviewed by: andrew
