VFS namecache, as is done by the Coda module on Linux. Unlike the Coda
namecache, the global VFS namecache isn't tagged by credential, so use
ore conservative flushing behavior (for now) when CODA_PURGEUSER is
issued by Venus.
This improves overall integration with the FreeBSD VFS, including
allowing __getcwd() to work better, procfs/procstat monitoring, and so
on. This improves shell behavior in many cases, and improves ".."
handling. It may lead to some slowdown until we've implemented a
specific access cache, which should net improve performance, but in the
mean time, lookup access control now always goes to Venus, whereas
previously it didn't.
MFC after: 1 month
When ntfs_ntput() reaches 0 in the refcount the inode lockmgr is not
released and directly destroyed. Fix this by unlocking the lockmgr() even
in the case of zero-refcount.
Reported by: dougb, yar, Scot Hetzel <swhetzel at gmail dot com>
Submitted by: yar
nfs_xid_gen() function instead of duplicating the logic in both
nfsm_rpchead() and the NFS3ERR_JUKEBOX handling in nfs_request().
MFC after: 1 week
Submitted by: mohans (a long while ago)
through the FreeBSD ABI. IPC_INFO, SHM_INFO, SHM_STAT were added
specifically for Linux binary support. They are not documented
as being a part of the FreeBSD ABI, also, the structures necessary
for them have been hidden away from the users for a long time.
Also, the Linux ABI layer uses it's own structures to populate the
responses back to the user to ensure that the ABI is consistent.
I think there is a bit more separation work that needs to happen.
Reviewed by: jhb
Discussed with: jhb
Discussed on: freebsd-arch@ (very briefly)
MFC after: 1 month
the PIC also informs the platform at which IRQ level it can start
assigning IPIs, since this can depend on the number of IRQs
supported for external interrupts.
PAGE_SIZE or less, the bounce page counting logic was flawed and wouldn't
reserve any pages. Adjust to be correct. Review of other architectures is
forthcoming.
Submitted by: Joseph Golio
With write-allocate cache we get into the following scenario:
1. data has been updated in the memory by the USB HC, but
2. D-cache holds an un-flushed value of it
3. when affected cache line is being replaced, the old (un-flushed) value is
flushed and overwrites the newly arrived
This is possible due to how write-allocate works with virtual caches (ARM for
example).
In case of USB transfers it leads to fatal tags discrepancies in umass(4)
operation, which look like the following:
umass0: Invalid CSW: tag 1 should be 2
(probe0:umass-sim0:0:0:0): Request completed with CAM_REQ_CMP_ERR
(probe0:umass-sim0:0:0:0): Retrying Command
umass0: Invalid CSW: tag 1 should be 3
(probe0:umass-sim0:0:0:0): Request completed with CAM_REQ_CMP_ERR
(probe0:umass-sim0:0:0:0): Retrying Command
umass0: Invalid CSW: tag 1 should be 4
(probe0:umass-sim0:0:0:0): Request completed with CAM_REQ_CMP_ERR
(probe0:umass-sim0:0:0:0): Retrying Command
umass0: Invalid CSW: tag 1 should be 5
(probe0:umass-sim0:0:0:0): Request completed with CAM_REQ_CMP_ERR
(probe0:umass-sim0:0:0:0): Retrying Command
umass0: Invalid CSW: tag 1 should be 6
(probe0:umass-sim0:0:0:0): Request completed with CAM_REQ_CMP_ERR
(probe0:umass-sim0:0:0:0): error 5
(probe0:umass-sim0:0:0:0): Retries Exausted
To eliminate this, a BUS_DMASYNC_PREREAD sync operation is required in
usbd_start_transfer().
Credits for nailing this down go to Grzegorz Bernacki gjb AT semihalf DOT com.
Reviewed by: imp
Approved by: cognet (mentor)
historical relic, and are no longer appropriate for either LAN or WAN
mounting. At modern (gigabit and 10 gigabit) LAN speeds packet loss
from socket buffer fill events is common, and sequence numbers wrap
quickly enough that data corruption is possible. TCP solves both of
these problems without imposing significant overhead.
MFC after: 1 month
sectors so the geometry of large IDE disks has to be adjusted. This
corresponds to what the OpenSolaris dad(7D) driver does except that
the latter only tweaks sectors and effectively limits the mediasize
to 128GB so the cylinders and heads fields won't ever overflow. Not
limiting the mediasize is a compromise between allowing to use Sun
disk label as far as possible and being able to use the entire disk
with another disk label.
This allows to use the full capacity of large IDE disks if they were
not labeled under (Open)Solaris (in both ways of the meaning).
MFC after: 2 weeks
Turn off TFTP support by default: when both TFTP and NFS are enabled in the
loader, strange interactions occur in the pure netbooting scenario (i.e.
loader is TFTP-ed, kernel+world mounted over NFS), leading to very slow access
to the NFS-exported files.
Reviewed by: grehan
Approved by: cognet (mentor)
The logical disks will appear as /dev/lvm/<vol group>-<logical vol>, for
instance /dev/lvm/vg0-home. GLVM currently supports linear stripes with
segments on multiple physical disks. The metadata is read only, logical
volumes can not be allocated or resized.
Reviewed by: Ivan Voras
- Include lock.h in lockmgr.h as nested header in order to safely use
LOCK_FILE and LOCK_LINE. As long as this code will be replaced soon
we can tollerate for a while this namespace pollution even if the real
fix would be to let lockmgr() depend by lock.h as a separate header.
tree, restyle everything but coda.h (which is more explicitly shared
across systems) into a closer approximation to style(9).
Remove a few more unused function prototypes.
Add or clarify some comments.
MFC after: 1 month
NOP-message polling in ciss_periodic().
Note that setting the tunable to non-zero can be workaround only for
`ADAPTER HEARTBEAT FAILED' problem, and may freeze the system w/o
the problem.
Reviewed by: scottl
Reported by: Attila Nagy
MFC after: 3 days
owned by a NULL owner. This will lead consequent VOP_ISLOCKED() present
into nfs_upgrade_vnlock() to panic as it only acquire curthread now.
Fix nfs_upgrade_vnlock() and nfs_downgrade_vnlock() in order to not use
more the struct thread pointer passed as argument (as it is really nomore
required there as vn_lock() and VOP_UNLOCK doesn't get the lock more).
Using curthread, in place, doesn't get ambiguity as LK_EXCLOTHER should
be handled as a "not locked" request by both functions.
Reported by: kris
Tested by: kris
Reviewed by: ups
- Rename print_vattr to coda_print_vattr and make static, rename
print_cred to coda_print_cred.
- Remove unused coda_vop_nop.
- Add XXX comment because coda_readdir forwards to the cache vnode's
readdir rather than venus_readdir, and annotate venus_readdir as
unused.
- Rename vc_nb_* to vc_*.
- Use d_open_t, d_close_t, d_read_t, d_write_t, d_ioctl_t and d_poll_t
for prototyping vc_* as that is the intent, don't use our own
definitions.
- Rename coda_nb_statfs to coda_statfs, rename NB_SFS_SIZ to
CODA_SFS_SIZ.
- Replace one more OBE reference to NetBSD with a reference to FreeBSD.
- Tidy up a little vertical whitespace here and there.
- Annotate coda_nc_zapvnode as unused.
- Remove unused vcodattach.
- Annotate VM_INTR as unused.
- Annotate that coda_fhtovp is unused and doesn't match the FreeBSD
prototype, so isn't hooked up to vfs_fhtovp. If we want NFS export of
Coda to work someday, this needs to be fixed.
- Remove unused getNewVnode.
- Remove unused coda_vget, coda_init, coda_quotactl prototypes.
MFC after: 1 month
the mountpoint for a specific device. This was implemented incorrectly,
a bad idea in a fundamental sense, and also never used, so presumably
a long-idle debugging function.
MFC after: 1 month
for vop_bmap; delete the existing stub that returned either EINVAL
or EOPNOTSUPP, and had unreachable calls to VOP_BMAP on the cache
vnode.
MFC after: 1 month
directory, and jail directory within procstat. While this functionality
is available already in fstat, encapsulating it in the kern.proc.filedesc
sysctl makes it accessible without using kvm and thus without needing
elevated permissions.
The new procstat output looks like:
PID COMM FD T V FLAGS REF OFFSET PRO NAME
76792 tcsh cwd v d -------- - - - /usr/src
76792 tcsh root v d -------- - - - /
76792 tcsh 15 v c rw------ 16 9130 - -
76792 tcsh 16 v c rw------ 16 9130 - -
76792 tcsh 17 v c rw------ 16 9130 - -
76792 tcsh 18 v c rw------ 16 9130 - -
76792 tcsh 19 v c rw------ 16 9130 - -
I am also bumping __FreeBSD_version for this as this new feature will be
used in at least one port.
Reviewed by: rwatson
Approved by: rwatson
then later to FreeBSD. Update various NetBSD-related comments: in some
cases delete them because they don't appply, in others update to say
FreeBSD as they still apply but in FreeBSD (and might for that matter
no longer apply on NetBSD), and flag one case where I'm not sure
whether it applies.
MFC after: 1 month
locks of those vnodes. Probably, Coda should do the same lock sharing/
pass-through that is done for nullfs, but in the mean time this ensures
that locks are adequately held to prevent corruption of data structures
in the cache file system.
Assuming most operations came from the top layer of Coda and weren't
performed directly on the cache vnodes, in practice this corruption was
relatively unlikely as the Coda vnode locks were ensuring exclusive
access for most consumers.
This causes WITNESS to squeal like a pig immediately when Coda is used,
rather than waiting until file close; I noticed these problems because
of the lack of said squealing.
MFC after: 1 month
vget() calls using inode numbers to query the root of /coda, which is not
needed since we now cache the root vnode with the mountpoint.
MFC after: 1 month
VOP_ISLOCKED(arg, curthread). Now, VOP_ISLOCKED() and lockstatus() should
only acquire curthread as argument; this will lead in axing the additional
argument from both functions, making the code cleaner.
Reviewed by: jeff, kib
the provided lock or &blocked_lock. The thread may be temporarily
assigned to the blocked_lock by the scheduler so a direct comparison
can not always be made.
- Use THREAD_LOCKPTR_ASSERT() in the primary consumers of the scheduling
interfaces. The schedulers themselves still use more explicit asserts.
Sponsored by: Nokia
obtained from OpenBSD with an algorithm suggested
by Amit Klein. The OpenBSD algorithm has a few
flaws; see Amit's paper for more information.
For a description of how this algorithm works,
please see the comments within the code.
Note that this commit does not yet enable random IP ID
generation by default. There are still some concerns
that doing so will adversely affect performance.
Reviewed by: rwatson
MFC After: 2 weeks
- Move recursion checking into rwlock inlines to free a bit for use with
adaptive spinners.
- Clear the RW_LOCK_WRITE_SPINNERS flag whenever the lock state changes
causing write spinners to restart their loop.
- Write spinners are limited by a count while readers hold the lock as
there is no way to know for certain whether readers are running still.
- In the read path block if there are write waiters or spinners to avoid
starving writers. Use a new per-thread count, td_rw_rlocks, to skip
starvation avoidance if it might cause a deadlock.
- Remove or change invalid assertions in turnstiles.
Reviewed by: attilio (developed parts of the patch as well)
Sponsored by: Nokia
This support tries to be as parallel as possible with other locking
primitives, but there are differences; more specifically:
- The base witness support is alredy equipped for allowing lock
duplication acquisition as lockmgr rely on this.
- In the case of lockmgr_disown() the lock result unlocked by witness
even if it is still held by the "kernel context"
- In the case of upgrading we can have 3 different situations:
* Total unlocking of the shared lock and nothing else
* Real witness upgrade if the owner is the first upgrader
* Shared unlocking and exclusive locking if the owner is not the first
upgrade but it is still allowed to upgrade
- LK_DRAIN is basically handled like an exclusive acquisition
Additively new options LK_NODUP and LK_NOWITNESS can now be used with
lockinit(): LK_NOWITNESS disables WITNESS for the specified lock while
LK_NODUP enable duplicated locks tracking. This will require manpages
update and a __FreeBSD_version bumping (addressed by further commits).
This patch also fixes a problem occurring if a lockmgr is held in
exclusive mode and the same owner try to acquire it in shared mode:
currently there is a spourious shared locking acquisition while what
we really want is a lock downgrade. Probabilly, this situation can be
better served with a EDEADLK failing errno return.
Side note: first testing on this patch alredy reveleated several LORs
reported, so please expect LORs cascades until resolved. NTFS also is
reported broken by WITNESS introduction. BTW, NTFS is exposing a lock
leak which needs to be fixed, and this patch can help it out if
rightly tweaked.
Tested by: kris, yar, Scot Hetzel <swhetzel at gmail dot com>
done in consumers code: using locks properties is much more appropriate.
Fix current code doing these bogus checks.
Note: Really, callout are not usable by all !(LC_SPINLOCK | LC_SLEEPABLE)
primitives like rmlocks doesn't implement the generic lock layer
functions, but they can be equipped for this, so the check is still
valid.
Tested by: matteo, kris (earlier version)
Reviewed by: jhb
This allows to fix a problem with ARM kernel.bin not having the MFS image
embedded: it is objcopied from the kernel.noheader temporary ELF file, which
was not subject to embedding the MFS image previously.
Reviewed by: imp
Approved by: cognet (mentor)
De-hardcode usage of ARM_TP_ADDRESS and RAS local storage, and move this
special purpose page to a more convenient place i.e. after the vectors high
page, more towards the end of address space. Previous location (0xe000_0000)
caused grief if KVA was to go beyond the default limit.
Note that ARM world rebuilding is required after this change since the
location of ARM_TP_ADDRESS is shared between kernel and userland.
Submitted by: Grzegorz Bernacki (gjb AT semihalf dot com)
Reviewed by: imp
Approved by: cognet (mentor)
- Expose sbrelease_internal(), a variant of sbrelease() with no
expectations about the validity of locks in the socket buffer.
- Use sbrelease_internel() in sorflush(), and as a result avoid intializing
and destroying a socket buffer lock for the temporary stack copy of the
actual buffer, asb.
- Add a comment indicating why we do what we do, and remove an XXX since
things have gotten less ugly in sorflush() lately.
This makes socket close cleaner, and possibly also marginally faster.
MFC after: 3 weeks
referencing the files VM pages are returned from the network stack,
making changes to the file safe.
This flag does not guarantee that the data has been transmitted to the
other end.
- Rename rt2560_read_eeprom to rt2560_read_config, we already have
rt2560_eeprom_read
- If hardware gives us wrong encryption done index, shout out loudly and
terminate the processing loop
- Process encryption done if RX done bit is set in interrupt status register
(according to Ralink Linux driver)
- Turn VALID/BUSY bits in TX descriptor only after TX descriptor is fully setup
- Fix BBP read: RT2560_BBPCSR can't be written until its RT2560_BBP_BUSY bit is
off (according to Ralink Linux driver)
- Skip invalid (0 of 0xffff) BBP register/value entries stored in EEPROM
- Fix channel TX power location in EEPROM, if channel TX power is above 31 set
it to 24 (TX power only has 5bits in RF register, "24" is according to Ralink
Linux driver)
- Configure BBP according to the BBP register/value stored in EEPROM, restore
BBP17 (RX sensitivity tuning) to default value after this.
- Set TX/RX antenna after BBP is initialized; these two operation will try to
set BBP registers
- Reconfigure ACK TX time registers according to 802.11g standard (TX @36Mb,
other side's ACK should be sent @24Mb).
- 2560 parts have two TX ring: one for management/control packets, one for data
packets. Add private OACTIVE flag for each of them. Turn on IFF_DRV_OACTIVE
if one of private OACTIVE is on; turn off IFF_DRV_OACTIVE iff all of them are
off.
- Rework watchdog to mimic old if_watchdog action. Process TX done/encryption
done in watchdog function (according to Ralink Linux driver)
Obtained from: DragonFly
Approved by: sam (mentor)
Tested by: sam
Related to PR: kern/117655
# Forcing long slot time setting is not included in this commit, comment and
# related code is in place, so if problem pops up, quick tests could be done.
down some DCMD's without any data. Thanks to Dell and LSI for helping
to provide clues to figure out this problem. Now MegaCli can upgrade
the firmware and should work identical when run on Linux.
Reviewed by: scottl, LSI
MFC after: 1 day
ipsec*_set_policy and do the privilege check only if needed.
Try to assimilate both ip*_ctloutput code blocks calling ipsec*_set_policy.
Reviewed by: rwatson
a variety of bootloaders. This sometimes means that different loader
scripts are required within one ${MACHINE_ARCH}, which makes the
current practice of using ldscript.${MACHINE_ARCH} unsuitable.
Instead, make the default the current convention and allow the ld
scripts to be overridden as necessary.
If we aren't arm, pc98 or sun4v, then enable treating warnings like
errors. That doesn't mean these platforms aren't -Werror clean, just
that we haven't enforced it before. Someone with some spare time
should investigate these three platforms to see if any can be removed.
PCI-express chipset (and thus has functional MSI) if there are any
PCI-express devices in the system, not requiring a root port device.
With PCI-X the chipset detection has to be very conservative because there
are known systems with PCI-X devices that do not appear to have PCI-X
chipsets. However, with PCI-express I'm not sure it is possible to have
a PCI-express device in a system with a non-PCI-express chipset. If we
assume that is the case then this change is valid. It is also required
for at least some PCI-express systems that don't have any devices with
a root port capability (some ICH9 systems).
MFC after: 1 week
Reported by: jfv
free function controlable, instead of passing the KVA of the buffer
storage as the first argument.
Fix all conventional users of the API to pass the KVA of the buffer
as the first argument, to make this a no-op commit.
Likely break the only non-convetional user of the API, after informing
the relevant committer.
Update the mbuf(9) manual page, which was already out of sync on
this point.
Bump __FreeBSD_version to 800016 as there is no way to tell how
many arguments a CPP macro needs any other way.
This paves the way for giving sendfile(9) a way to wait for the
passed storage to have been accessed before returning.
This does not affect the memory layout or size of mbufs.
Parental oversight by: sam and rwatson.
No MFC is anticipated.
aligned (or at least not cross a page boundary). However, it turns out
that on at least one machine one table header does cross a page boundary.
This caused problems with the MADT early probe as it uses the crash dump
map to load ACPI tables by loading the RSDT/XSDT into pages 1 ... N and
loading the header of each ACPI table header into page 0 looking for the
MADT. However, if a table header crossed a page boundary, then page 1
would get trashed resulting in a panic. Fix this by reserving the first
2 pages for ACPI table headers (headers are less than a page in size,
so 2 pages will be sufficient) and use pages 2 .. N for the RSDT and XSDT.
Note: amd64 should probably be simplified to just use pmap_mapbios()
for all these tables which will use the direct map and not need the
crash dump hack.
MFC after: 5 days
Tested on: i386
Reported by: Pete French petefrench of ticketswitch.com
read socket buffers in shutdown() and close():
- Call socantrcvmore() before sblock() to dislodge any threads that
might be sleeping (potentially indefinitely) while holding sblock(),
such as a thread blocked in recv().
- Flag the sblock() call as non-interruptible so that a signal
delivered to the thread calling sorflush() doesn't cause sblock() to
fail. The sblock() is required to ensure that all other socket
consumer threads have, in fact, left, and do not enter, the socket
buffer until we're done flushin it.
To implement the latter, change the 'flags' argument to sblock() to
accept two flags, SBL_WAIT and SBL_NOINTR, rather than one M_WAITOK
flag. When SBL_NOINTR is set, it forces a non-interruptible sx
acquisition, regardless of the setting of the disposition of SB_NOINTR
on the socket buffer; without this change it would be possible for
another thread to clear SB_NOINTR between when the socket buffer mutex
is released and sblock() is invoked.
Reviewed by: bz, kmacy
Reported by: Jos Backus <jos at catnook dot com>
The only downside is that it renames pmap_vac_me_harder() to pmap_fix_cache().
From Mark's email on -arm :
pmap_get_vac_flags(), pmap_vac_me_harder(), pmap_vac_me_kpmap(), and
pmap_vac_me_user() has been rewritten as pmap_fix_cache() to be more
efficient in the kernel map case. I also removed the reference to
the md.kro_mappings, md.krw_mappings, md.uro_mappings, and md.urw_mappings
counts.
In pmap_clearbit(), we can also skip over tests and writeback/invalidations
in the PVF_MOD and PVF_REF cases if those bits are not set in the pv_flag.
PVF_WRITE will turn caching back on and remove the PV_MOD bit.
In pmap_nuke_pv(), the vm_page_flag_clear(pg, PG_WRITEABLE) has been moved
to the pmap_fix_cache().
We can be more agressive in attempting to turn caching back on by calling
pmap_fix_cache() at times that may be appropriate to turn cache on
(a kernel mapping has been removed, a write has been removed or a read
has been removed and we know the mapping does not have multiple write
mappings to a page).
In pmap_remove_pages() the cpu_idcache_wbinv_all() is moved to happen
before the page tables are NULLed because the caches are virtually
indexed and virtually tagged.
In pmap_remove_all(), the pmap_remove_write(m) is added before the
page tables are NULLed because the caches are virtually indexed and
virtually tagged. This also removes the need for the caches fixing routine
(whichever is being used pmap_vac_me_harder() or pmap_fix_cache()) to be
called on any of these mappings.
In pmap_remove(), I simplified the cache cleaning process and removed
extra TLB removals. Basically if more than PMAP_REMOVE_CLEAN_LIST_SIZE
are removed, then just flush the entire cache.
This implemntation made for growing down stack organization like i386/amd64
platforms have, but prefers different machine dependent version if it is present.
o conversion to callout(9) API.
o add a missing driver lock in bfe_ifmedia_sts().
o use our callout to drive watchdog timer.
o restart Tx routine if pending queued packets are present in
watchdog handler.
o unarm watchdog timer only if there are no queued packets.
o don't blindly reset phy and let phy driver handle link change
request in bfe_init_locked().
o return the status of mii_mediachg() to caller in
bfe_ifmedia_upd(). Previously it always returned 0 to caller.
o add check for IFF_DRV_RUNNING flag as well as IFF_DRV_OACTIVE
in bfe_start_locked().
o implement miibus_statchg method that keeps track of current
link state changes as well as negotiated speed/duplex/
flow-control configuration.
Reprogram MAC to appropriate duplex state. Flow-control
configuration was also implemented but commented out at the
moment. The flow-control configuration will be enabled again
after we have general flow-control framework in mii layer.
Reported by: Yousif Hassan < yousif () alumni ! jmu ! edu >
Tesdted by: Yousif Hassan < yousif () alumni ! jmu ! edu >
This makes sure that process tokens credentials with un-initialized
audit contexts are handled correctly. Currently, when invariants are
enabled, this change fixes a panic by ensuring that we have a valid
termid family. Also, this fixes token generation for process tokens
making sure that userspace is always getting a valid token.
This is consistent with what Solaris does when an audit context is
un-initialized.
Obtained from: TrustedBSD Project
MFC after: 1 week
relabel check for MLS rather than returning 0 directly.
This problem didn't result in a vulnerability currently as the central
implementation of ifnet relabeling also checks for UNIX privilege, and
we currently don't guarantee containment for the root user in mac_mls,
but we should be using the MLS definition of privilege as well as the
UNIX definition in anticipation of supporting root containment at some
point.
MFC after: 3 days
Submitted by: Zhouyi Zhou <zhouzhouyi at gmail dot com>
Sponsored by: Google SoC 2007
- Fix whitespace according to style(9).
- Sync the comment describing why we have to wait in nsphy_reset()
with nsphyter_reset(). It's true that the manual tells to not do a
reset within 500us of applying power but that's unlikely the cause
of problems seen here. Generally having to wait 500us after a reset
however is.
DP83847 PHYs. The main reason for using a specific driver for these
PHYs are reset quirks similar to the nsphy(4) driven DP83840A.
PR: 112654
Obtained from: NetBSD
MFC after: 2 weeks
Thanks to: mlaier for testing w/ DP83815
overridden at compile-time using kernel options of the same names.
Rather than doing a compile-time CTASSERT of buffer sizes being
even multiples of block sizes, just adjust them at boottime, as
the failure mode is more user-friendly.
MFC after: 2 months
PR: 119993
Suggested by: Scot Hetzel <swhetzel at gmail dot com>
fields in FTS and FTSENT structs being too narrow. In addition,
the narrow types creep from there into fts.c. As a result, fts(3)
consumers, e.g., find(1) or rm(1), can't handle file trees an ordinary
user can create, which can have security implications.
To fix the historic implementation of fts(3), OpenBSD and NetBSD
have already changed <fts.h> in somewhat incompatible ways, so we
are free to do so, too. This change is a superset of changes from
the other BSDs with a few more improvements. It doesn't touch
fts(3) functionality; it just extends integer types used by it to
match modern reality and the C standard.
Here are its points:
o For C object sizes, use size_t unless it's 100% certain that
the object will be really small. (Note that fts(3) can construct
pathnames _much_ longer than PATH_MAX for its consumers.)
o Avoid the short types because on modern platforms using them
results in larger and slower code. Change shorts to ints as
follows:
- For variables than count simple, limited things like states,
use plain vanilla `int' as it's the type of choice in C.
- For a limited number of bit flags use `unsigned' because signed
bit-wise operations are implementation-defined, i.e., unportable,
in C.
o For things that should be at least 64 bits wide, use long long
and not int64_t, as the latter is an optional type. See
FTSENT.fts_number aka FTS.fts_bignum. Extending fts_number `to
satisfy future needs' is pointless because there is fts_pointer,
which can be used to link to arbitrary data from an FTSENT.
However, there already are fts(3) consumers that require fts_number,
or fts_bignum, have at least 64 bits in it, so we must allow for them.
o For the tree depth, use `long'. This is a trade-off between making
this field too wide and allowing for 64-bit inode numbers and/or
chain-mounted filesystems. On the one hand, `long' is almost
enough for 32-bit filesystems on a 32-bit platform (our ino_t is
uint32_t now). On the other hand, platforms with a 64-bit (or
wider) `long' will be ready for 64-bit inode numbers, as well as
for several 32-bit filesystems mounted one under another. Note
that fts_level has to be signed because -1 is a magic value for it,
FTS_ROOTPARENTLEVEL.
o For the `nlinks' local var in fts_build(), use `long'. The logic
in fts_build() requires that `nlinks' be signed, but our nlink_t
currently is uint16_t. Therefore let's make the signed var wide
enough to be able to represent 2^16-1 in pure C99, and even 2^32-1
on a 64-bit platform. Perhaps the logic should be changed just
to use nlink_t, but it can be done later w/o breaking fts(3) ABI
any more because `nlinks' is just a local var.
This commit also inludes supporting stuff for the fts change:
o Preserve the old versions of fts(3) functions through libc symbol
versioning because the old versions appeared in all our former releases.
o Bump __FreeBSD_version just in case. There is a small chance that
some ill-written 3-rd party apps may fail to build or work correctly
if compiled after this change.
o Update the fts(3) manpage accordingly. In particular, remove
references to fts_bignum, which was a FreeBSD-specific hack to work
around the too narrow types of FTSENT members. Now fts_number is
at least 64 bits wide (long long) and fts_bignum is an undocumented
alias for fts_number kept around for compatibility reasons. According
to Google Code Search, the only big consumers of fts_bignum are in
our own source tree, so they can be fixed easily to use fts_number.
o Mention the change in src/UPDATING.
PR: bin/104458
Approved by: re (quite a while ago)
Discussed with: deischen (the symbol versioning part)
Reviewed by: -arch (mostly silence); das (generally OK, but we didn't
agree on some types used; assuming that no objections on
-arch let me to stick to my opinion)
exposed as kernel compile options, they have more meaningful names.
PR: 119993
MFC after: 2 months
Suggested by: Scot Hetzel <swhetzel at gmail dot com>
bug that caused us to reintroduce it is believed to be fixed, and Kris
says he no longer sees problems with fifofs in highly parallel builds.
If this works out, we'll MFC it for 7.1.
MFC after: 3 months
Pointed out by: kris
resulted in the argument to the make_dev() to be a unit number.
Correct this by supplying a minor number to make_dev(), and using
the unit number for the calculation of the slave tty name.
Reported and tested by: Peter Holm
Reviewed by: jhb
Yet another pointy hat to: kib
MFC after: 1 day
while the thread does not hold the thread lock would stop blocking for
subsequent interruptible sleeps and would always immediately fail the
sleep with EWOULDBLOCK instead (even sleeps that didn't have a timeout).
Some background:
- KSE has a facility for allowing one thread to interrupt another thread.
During this process, the target thread aborts any interruptible sleeps
much as if the target thread had a pending signal. Once the target
thread acknowledges the interrupt, normal sleep handling resumes. KSE
manages this via the TDF_INTERRUPTED flag. Specifically, it sets the
flag when it sends an interrupt to another thread and clears it when
the interrupt is acknowledged. (Note that this is purely a software
interrupt sort of thing and has no relation to hardware interrupts
or kernel interrupt threads.)
- The old code for handling the sleep timeout race handled the race
by setting the TDF_INTERRUPT flag and faking a KSE-style thread
interrupt to the thread in the process of going to sleep. It probably
should have just checked the TDF_TIMEOUT flag in sleepq_catch_signals()
instead.
- The bug was that the sleepq code would set TDF_INTERRUPT but it was
never cleared. The sleepq code couldn't safely clear it in case there
actually was a real KSE thread interrupt pending for the target thread
(in fact, the sleepq timeout actually stomped on said pending interrupt).
Thus, any future interruptible sleeps (*sleep(.. PCATCH ..) or
cv_*wait_sig()) would see the TDF_INTERRUPT flag set and immediately
fail with EWOULDBLOCK. The flag could be cleared if the thread belonged
to a KSE process and another thread posted an interrupt to the original
thread. However, in the more common case of a non-KSE process, the
thread would pretty much stop sleeping.
- Fix the bug by just setting TDF_TIMEOUT in the sleepq timeout code and
not messing with TDF_INTERRUPT and td_intrval. With yesterday's fix to
fix sleepq_switch() to check TDF_TIMEOUT, this is now sufficient.
MFC after: 3 days
exposing them to all consumers of ip_fw.h. These structures are
used in both ipfw(8) and ipfw(4), but not part of the user<->kernel
interface for other applications to use, rather, shared
implementation.
MFC after: 3 days
Reported by: Paul Vixie <paul at vix dot com>
being properly cancelled by a timeout. In general there is a race
between a the sleepq timeout handler firing while the thread is still
in the process of going to sleep. In 6.x with sched_lock, the race was
largely protected by sched_lock. The only place it was "exposed" and had
to be handled was while checking for any pending signals in
sleepq_catch_signals().
With the thread lock changes, the thread lock is dropped in between
sleepq_add() and sleepq_*wait*() opening up a new window for this race.
Thus, if the timeout fired while the sleeping thread was in between
sleepq_add() and sleepq_*wait*(), the thread would be marked as timed
out, but the thread would not be dequeued and sleepq_switch() would
still block the thread until it was awakened via some other means. In
the case of pause(9) where there is no other wakeup, the thread would
never be awakened.
Fix this by teaching sleepq_switch() to check if the thread has had its
sleep canceled before blocking by checking the TDF_TIMEOUT flag and
aborting the sleep and dequeueing the thread if it is set.
MFC after: 3 days
Reported by: dwhite, peter
`kn_sdata' member of the newly registered knote. The problem is that
this member is overwritten by a call to kevent(2) with the EV_ADD flag,
targetted at the same kevent/knote. For instance, a userland application
may set the pointer to NULL, leading to a panic.
A testcase was provided by the submitter.
PR: kern/118911
Submitted by: MOROHOSHI Akihiko <moro@remus.dti.ne.jp>
MFC after: 1 day
- Remove the "thread" argument from the lockmgr() function as it is
always curthread now
- Axe lockcount() function as it is no longer used
- Axe LOCKMGR_ASSERT() as it is bogus really and no currently used.
Hopefully this will be soonly replaced by something suitable for it.
- Remove the prototype for dumplockinfo() as the function is no longer
present
Addictionally:
- Introduce a KASSERT() in lockstatus() in order to let it accept only
curthread or NULL as they should only be passed
- Do a little bit of style(9) cleanup on lockmgr.h
KPI results heavilly broken by this change, so manpages and
FreeBSD_version will be modified accordingly by further commits.
Tested by: matteo
doesn't overflow in arc.c in this check:
if (kmem_used() > (kmem_size() * 4) / 5)
return (1);
With this bug ZFS almost doesn't cache.
Only 32bit machines are affected that have vm.kmem_size set to values >=1GB.
Reported by: David Taylor <davidt@yadt.co.uk>
Introduce a new privilege allowing to set certain IP header options
(hop-by-hop, routing headers).
Leave a few comments to be addressed later.
Reviewed by: rwatson (older version, before addressing his comments)
- Improve error handling for load operations.
- Fix a memory corruption bug when using certain linux management apps.
- Allocate all commands up front to avoid OOM deadlocks later on.
while in principle a good idea, opened us up to a race inherrent to
the syncache's direct insertion of incoming TCP connections into the
"completed connection" listen queue, as it transpires that the socket
is inserted before the inpcb is fully filled in by syncache_expand().
The bug manifested with the occasional returning of 0.0.0.0:0 in the
address returned by the accept() system call, which occurred if accept
managed to execute tcp_usr_accept() before syncache_expand() had copied
the endpoint addresses into inpcb connection state.
Re-add tcbinfo locking around the address copyout, which has the effect
of delaying the copy until syncache_expand() has finished running, as
it is run while the tcbinfo lock is held. This is undesirable in that
it increases contention on tcbinfo further, but a more significant
change will be required to how the syncache inserts new sockets in
order to fix this and keep more granular locking here. In particular,
either more state needs to be passed into sonewconn() so that
pru_attach() can fill in the fields *before* the socket is inserted, or
the socket needs to be inserted in the incomplete connection queue
until it is actually ready to be used.
Reported by: glebius (and kris)
Tested by: glebius
a run-queue. If the priority is numerically raised only change lowpri
if we're certain it will be correct. Some slop is allowed however
previously we could erroneously raise lowpri for an idle cpu that a
thread had recently run on which lead to errors in load balancing
decisions.
to files, such as ktrace output, under CODA_VERBOSE. Otherwise, each
such call to VOP_WRITE() results in a kernel printf.
MFC after: 3 days
Obtained from: NetBSD
checksum offoload by downloading AIC-6915 firmware. Changes are
o Header file cleanup.
o Simplified probe logic.
o s/u_int{8,16,32}_t/uint{8,16,32}_t/g
o K&R -> ANSI C.
o In register access function, added support both memory mapped and
IO space register acccess. The function will dynamically detect
which method would be choosed.
o sf_setperf() was modified to support strict-alignment
architectures.
o Use SF_MII_DATAPORT instead of hardcoded value 0xffff.
o Added link state/speed, duplex changes handling task q. The task q
is also responsible for flow control settings.
o Always hornor link up/down state reported by mii layers. The link
state information is used in sf_start() to determine whether we
got a valid link.
o Added experimental flow-control setup. It was commented out but
will be activated once we have flow-cotrol infrastructure in mii
layer.
o Simplify IFF_UP/IFCAP_POLLING and IFF_PROMISC handling logic. Rx
filter always honors promiscuous mode.
o Implemented suspend/resume methods.
o Reorganized Rx filter routine so promiscuous mode changes doesn't
require interface re-initialization.
o Reimplemnted driver probe routine such that it looks for matching
device from supported hardware list table. This change will help to
add newer hardware revision to the driver.
o Use ETHER_ADDR_LEN instead of hardcoded value.
o Prefer memory space register mapping over I/O space as the hardware
requires lots of register access to get various consumer/producer
index. Failing to get memory space mapping, sf(4) falls back to I/O
space mapping. Use of memory space register mapping requires
somewhat large memory space(512K), though.
o Switch to simpler bus_{read,write}_{1,2,4}.
o Use PCIR_BAR macro to get BARs.
o Program PCI cache line size if the cache line size was set to 0
and enable PCI MWI.
o Add a new sysctl node 'dev.sf.N.stats' that shows various MAC
counters for Rx/Tx statistics.
o Add a sysctl node to configure interrupt moderation timer. The
timer defers interrupts generation until time specified in timer
control register is expired. The value in the timer register is in
units of 102.4us. The allowable range for the timer is 0 - 31
(0 ~ 3.276ms).
The default value is 1(102.4us). Users can change the timer value
with dev.sf.N.int_mod sysctl(8) variable/loader(8) tunable.
o bus_dma(9) conversion
- Enable 64bit DMA addressing.
- Enable 64bit descriptor format support.
- Apply descriptor ring alignment requirements(256 bytes alignment).
- Apply Rx buffer address alignment requirements(4 bytes alignment).
- Apply 4GB boundary restrictions(Tx/Rx ring and its completion ring
should live in the same 4GB address space.)
- Set number of allowable number of DMA segments to 16. In fact,
AIC-6915 doesn't have a limit for number of DMA segments but it
would be waste of Tx descriptor resource if we allow more than 16.
- Rx/Tx side bus_dmamap_load_mbuf_sg(9) support.
- Added alignment fixup code for strict-alignment architectures.
- Added endianness support code in Tx/Rx descriptor access.
With these changes sf(4) should work on all platforms.
o Don't set if_mtu in device attach, it's handled in ether_ifattach.
o Use our own callout to drive watchdog timer.
o Enable VLAN oversized frames and announce sf(4)'s VLAN capability
to upper layer.
o In sf_detach(), remove mtx_initialized KASSERT as it's not possible
to get there without initialzing the mutex. Also mark that we're
about to detaching so active bpf listeners do not panic the system.
o To reduce PCI register access cycles, Rx completion ring is
directly scanned instead of reading consumer/producer index
registers. In theory, Tx completion ring also can be directly
scanned. However the completion ring is composed of two types
completion(1 for Tx done and 1 and DMA done). So reading producer
index via register access would be more safer way to detect the
ring wrap-around.
o In sf_rxeof(), don't use m_devget(9) to align recevied frames. The
alignment is required only for strict-alignment architectures and
now the alignment is handled by sf_fixup_rx() if required. The
removal of the copy operation in fast path should increase Rx
performance a lot on non-strict-alignemnt architectures such as
i386 and amd64.
o In sf_newbuf(), don't set descriptor valid bit as sf(4) is
programmed to run with normal mode. In normal mode, the valid bit
have no meaning. The valid bit should be used only when the
hardware uses polling(prefetch) mode. The end of descriptor queue
bit could be used if needed, but sf(4) relys on auto-wrapping of
hardware on 256 descriptor queue entries so both valid and
descriptor end bit are not used anymore.
o Don't disable generation of Tx DMA completion as said in datasheet
and use the Tx DMA completion entry instead of relying on Tx done
completion entry. Also added additional Tx completion entry type
check in Tx completion handler.
o Don't blindly reset watchdog timer in sf_txeof(). sf(4) now unarm
the the watchdog only if there are no active Tx descriptors in Tx
queue.
o Don't manually update various counters in driver, instead, use
built-in MAC statistic registers to update them. The statistic
registers are updated in every second.
o Modified Tx underrun handlers to increase the threshold value
in units of 256 bytes. Previously it used to increase 16 bytes
at a time which seems to take too long to stabalize whenever Tx
underrun occurrs.
o In interrupt handler, additional check for the interrupt is
performed such that interrupts only for this device is allowed to
process descriptor rings. Because reading SF_ISR register clears
all interrtups, nuke writing to a SF_ISR register.
o Tx underrun is abonormal condition and SF_ISR_ABNORMALINTR includes
the interrupt. So there is no need to inspect the Tx underrun again
in main interrupt loop.
o Don't blindly reinitialize hardware for abnormal interrupt
condition. sf(4) reintializes the hardware only when it encounters
DMA error which requires an explicit hardware reinitialization.
o Fix a long standing bug that incorrectly clears MAC statistic
registers in sf_init_locked.
o Added strict-alignment safe way of ethernet address reprogramming
as IF_LLADDR may return unaligned address.
o Move sf_reset() to sf_init_locked in order to always reset the
hardware to a known state prior to configuring hardware.
o Set default Rx DMA, Tx DMA paramters as shown in datasheet.
o Enable PCI busmaster logic and autopadding for VLAN frames.
o Rework sf_encap.
- Previously sf(4) used to type 0 of Tx descriptor with padding
enabled to store driver private data. Emebedding private data
structures into descriptors is bad idea as the structure size
would be different between 64bit and 32bit architectures. The
type 0 descriptor allows fixed number of DMA segments in
a descriptor format and provides relatively simple interface to
manage multi-fragmented frames.
However, it wastes lots of Tx descriptors as not all frames are
fragmented as the number of allowable segments in a descriptor.
- To overcome the limitation of type 0 descriptor, switch to type
2 descriptor which allows 64bit DMA addressing and can handle
unliumited number of fragmented DMA segments. The drawback of
type 2 descriptor is in its complexity in managing descriptors
as driver should handle the end of Tx ring manually.
- Manually set Tx desciptor queue end mark and record number of
used descriptors to reclaim used descriptors in sf_txeof().
o Rework sf_start.
- Honor link up/down state before attempting transmission.
- Because sf(4) uses only one of two Tx queues, use low priority
queue instead of high one. This will remove one shift operation
in each Tx kick command.
- Cache last produder index into softc such that subsequenet Tx
operation doesn't need to access producer index register.
o Rewrote sf_stats_update to include all available MAC statistic
counters.
o Employ AIC-6915 firmware from Adaptec and implement firmware
download routine and TCP/UDP checksum offload.
Partial checksum offload support was commented out due to the
possibility of firmware bug in RxGFP.
The firmware can strip VLAN tag in Rx path but the lack of firmware
assistance of VLAN tag insertion in transmit side made it useless
on FreeBSD. Unlike checksum offload, FreeBSD requires both Tx/Rx
hardware VLAN assistance capability. The firmware may also detect
wakeup frame and can wake system up from states other than D0.
However, the lack of wakeup support form D3cold state keep me from
adding WOL capability. Also detecting WOL frame requires firmware
support but it's not yet known to me whether the firmware can
process the WOL frame.
o Changed *_ADDR_HIADDR to *_ADDR_HI to match other definitions of
registers.
o Added definitioan to interrupt moderation related constants.
o Redefined SF_INTRS to include Tx DMA done and DMA errors. Removed
Tx done as it's not needed anymore.
o Added definition for Rx/Tx DMA high priority threshold.
o Nuked unused marco SF_IDX_LO, SF_IDX_HI.
o Added complete MAC statistic register definition.
o Modified sf_stats structure to hold all MAC statistic regiters.
o Nuke various driver private padding data in Tx/Rx descriptor
definition. sf(4) no longer requires private padding. Also remove
unused padding related definitions. This greatly simplifies
descriptor manipulation on 64bit architectures.
o Becase we no longer pad driver private data into descriptor,
remove deprecated/not-applicable comments for padding.
o Redefine Rx/Tx desciptor status. sf(4) doesn't use bit fileds
anymore to support endianness.
Tested by: bruffer (initial version)
be wrong but I couldn't find a way to make it work. In addition, the
number of TxGFP instruction does not match the firmware image size,
so I guess something was wrong when Adaptec generated the TxGFP
firmware from their DDK.
According to datasheet, normally, the first GFP instruction would be
opcode C, WaitForStartOfFrame, to synchronize checksumming with
incoming frame. But the first instruction in TxGFP firmware was
opcode 1, BrToImmIfTrue, so it could not process checksum correctly,
I guess. Checking for RxGFP firmware also indicates the first
instruction should be opcode C. Since the number of instructions in
TxGFP firmware lacks exactly one instruction, I prepended the opcode
C to TxGFP firmware image. With this change, the resulting image size
perfectly matches with the nummber of instructions and Tx checksum
offload seems to work without problems.
lockmgr lkp, when held in exclusive mode, is recursed
- Introduce the function BUF_RECURSED() which does the same for bufobj
locks based on the top of lockmgr_recursed()
- Introduce the function BUF_ISLOCKED() which works like the counterpart
VOP_ISLOCKED(9), showing the state of lockmgr linked with the bufobj
BUF_RECURSED() and BUF_ISLOCKED() entirely replace the usage of bogus
BUF_REFCNT() in a more explicative and SMP-compliant way.
This allows us to axe out BUF_REFCNT() and leaving the function
lockcount() totally unused in our stock kernel. Further commits will
axe lockcount() as well as part of lockmgr() cleanup.
KPI results, obviously, broken so further commits will update manpages
and freebsd version.
Tested by: kris (on UFS and NFS)
- Don't specify vnode operations for mknod, lease, and advlock--let them
fall through to vop_default.
- Implement vop_default with &default_vnodeops, rather than with VOP_PANIC,
so that unimplemented vnode operations are handled in more sensible ways
than panicking, such as EOPNOTSUPP on ACL queries generated by bsdtar,
or mknod.
MFC after: 3 days
fill out all fields, just fill out the ones the file system knows
about. Among other things, this causes the outpuf of "mount" and
"df" to make quite a bit more sense as /dev/cfs0 is specified as the
mountfrom name.
MFC after: 3 days
vnodes during coda_unmount() in order to detect errant use of them
after the vnode references may no longer be valid.
No need to clear the VV_ROOT flag on mi_rootvp flag (especially after
the vnode reference is no longer valid) as this isn't done on other
file systems.
MFC after: 3 days
and then release it when it is closed: we rely on the caller to keep the
vnode around with a valid reference. This avoids vrele() destroying the
vnode vop_close() is being called from during a call to vop_close(), and
a crash due to lockmgr recursing the vnode lock when a Coda unmount
occurs.
MFC after: 3 days
Move all extern variable definitions to associated .h files, move some
extern variable definitions between include files to place them more
appropriately.
MFC after: 3 days
Coda vnode derived from it, in the style of nullfs. This allows files
in the Coda file system to be memory-mapped, such as with execve(2) or
mmap(2).
MFC after: 3 days
Reported by: Rune <u+openafsdev-sr55 at chalmers dot se>
"BSM conversion requested for unknown event 43140"
It should be noted that we need to audit the fd argument for this system
call.
Obtained from: TrustedBSD Project
MFC after: 1 week
unp_connect(): it is expected to return with the lock held, and two
possible error paths otherwise returned with it unlocked.
The fix committed here is slightly different from the patch in the
PR, but along an alternative line suggested in the PR.
PR: 119778
MFC after: 3 days
Submitted by: James Juran <james dot juran at baesystems dot com>
was missed. As result, pty_create_slave() may index out of the names[]
bounds, creating wrong slave tty names.
Tested by: kensmith
Reviewed by: jhb
MFC after: 3 days
since the the command and data that is being built to be sent to or read
from the HW lives in the softc. Commands are later run via an_setdef etc.
In the ioctl path various references are kept to the data stored in
the softc so it needs to be protected. Almost think of the command
in the softc a global variable since it essentially is. Since locking
wasn't done in this type of context the commands would get corrupted.
Thanks to avatar@ for catching some lock issues and dhw@ for testing.
Things are a lot more stable except for the MPI-350 cards. My an(4)
remote laptop stays on the network now.
The driver should be changed so that it uses private memory that is passed
to the functions that talk to the card. Then only those functions would
really need to grab locks.
Reviewed by: avatar@
