Before that dtbs where included in each kernel packages which prevents
us to install multiple kernels.
Differential Revision: https://reviews.freebsd.org/D43632
Reviewed by: bapt
Sponsored by: Beckhoff Automation GmbH & Co. KG
The `make release` command now creates VM and cloudware images (if
enabled) in addition to disk images; this results in a very large
number of 'make installworld' commands running sequentially. Adding
-jN should speed this up significantly.
MFC after: 1 month
X-MFC-to: stable/14
The amd64 and arm64 images supported UEFI, mark it as so users can take
advantage of UEFI boot on GCE. This is already done on FreeBSD
14.0-RELEASE but never codified into the release tools (and should).
PR: conf/276532
Reviewed by: lwhsu
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D43557
Components like base.txz and ports.txz are called distributions in the
installer, and with the introduction of pkgbase we will start dealing
with normal pkg packages in the installer. Rename EXTRA_PACKAGES to
DISTRIBUTIONS, and move base.txz and kernel.txz to that list.
This introduces no functional change but is a small cleanup in advance
of some pkgbase experimentation.
Reviewed by: cperciva
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D43544
The stable/13 snapshot this week failed to build the riscv GENERICSD
image because it ran out of space. Checking main and stable/14
snapshots, they are also low on space, around 100% or more of
capacity. Increase them all from 5 GB to 6 GB. Note, this is the
only riscv image configuration.
Discussed with: cperciva
This marks FreeBSD GCE images as gVNIC capable by adding the
--guest-os-features=GVNIC flag at creation time as suggested in GCE
documentation[1]. This allows Generation 3 and newer GCE instances
to leverage advanced networking capabilities and performance
enhancements provided by gVNIC. Users will benefit from these
improvements without needing to create custom images.
[1] https://cloud.google.com/compute/docs/networking/using-gvnic#create_a_vm_with_gvnic_support
Reviewed by: cperciva
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D43411
Most 64-bit Raspberry Pi models have a variable processor clock
speed that defaults to a slow speed (e.g. 600 MHz for a nominal
1.5 GHz clock). This results in everything running slowly unless
or until powerd is started, and FreeBSD is then thought to be slow.
Enable powerd by default in /etc/rc.conf on the arm64-aarch64-RPI
images. Tested on Raspberry Pi 3B+ and 4B so far.
PR: 256836
MFC after: 1 month
Reviewed by: rgrimes
Differential Revision: https://reviews.freebsd.org/D43296
Allow the cloudware *_FLAVOURS and *_FSLIST values to be overridden
at the command line, to assist users who want to e.g. build only one
of the many EC2 AMIs available.
FreeBSD-src for all the sources but the kernel
FreeBSD-src-sys just for the kernel
MFC After: 3 days
Reviewed by: manu
Differential Revision: https://reviews.freebsd.org/D42651
The emulator-portinstall target now unconditionally ensures that qemu
is installed; but is only invoked if needed (aka. when cross building
VM images).
MFC After: 3 days
MFC With: 97bd53ef4d ("Fix duplicate rc.conf files")
Two bugs in Makefile.vm resulted in disk images being "built" multiple
times, resulting in lines added to /etc/rc.conf being duplicated:
1. The vm-image target reused the same "staging tree" directory for all
of its builds (multiple disk image types and multiple filesystem types).
2. The cw-type-flavour-fs target depends on emulator-portinstall, which
did not have a 'touch ${.TARGET}' and thus re-ran every time -- and
caused the cw-type-flavour-fs target to be re-run. This was triggered
by release builds running `make cloudware-release` (creating the disk
images) followed by `make ec2amis` (which re-created the disk images
prior to uploading them).
MFC After: 1 week
Sponsored by: https://www.patreon.com/cperciva
Unbloat a bit FreeBSD-utilities.
The only package that will depends on this new one is FreeBSD-ssh
which not anyone have in some setup.
And this will allow to have small pkgbase setup with ssh without
having to bring the bloated FreeBSD-utilities package
Name the package blocklist to reflect upstream futur changes.
Sponsored by: Beckhoff Automation GmbH & Co. KG
Reviewed by: emaste
Differential Revision: https://reviews.freebsd.org/D42148
Known issues:
1. The ec2-user user is created with a homedir of /usr/home/ec2-user
instead of /home/ec2-user; this appears to be a bug in cloud-init's
FreeBSD support.
2. Cloud-init configures IPv4 networking but not IPv6 networking.
releng/14.0 candidate.
Discussed with: gjb
Reviewed by: imp
MFC after: 5 days
Relnotes: yes
Sponsored by: https://www.patreon.com/cperciva
Differential Revision: https://reviews.freebsd.org/D41793
Split ec2-base.conf into ec2-base.conf and a reusable ec2.conf,
similar to how Vagrant flavours share a common vagrant.conf.
releng/14.0 candidate.
Discussed with: gjb
MFC after: 5 days
Sponsored by: https://www.patreon.com/cperciva
Differential Revision: https://reviews.freebsd.org/D41792
Using the recently-added "cloudware flavours" mechanism, turn the
existing EC2 AMIs into a new "base" flavour. The only user-visible
change is that AMI names now include the word "base".
releng/14.0 candidate.
Discussed with: gjb
Reviewed by: imp
MFC after: 5 days
Sponsored by: https://www.patreon.com/cperciva
Differential Revision: https://reviews.freebsd.org/D41791
There are two "Vagrant" images right now: "Vagrant Image for VirtualBox"
and "Vagrant Image for VMWare". Rather than listing these separately in
a CLOUDWARE list, place "VAGRANT" into a CLOUDWARE_TYPES list and then
use a VAGRANT_FLAVOURS variable to identify the two versions. Add make
logic to allow defaults (in this case, image format and filesystem) to
be specified once for VAGRANT and inherited by both flavours.
This will make future work to add flavoured EC2 images simpler.
releng/14.0 candidate.
Discussed with: gjb
Reviewed by: imp
MFC after: 5 days
Sponsored by: https://www.patreon.com/cperciva
Differential Revision: https://reviews.freebsd.org/D41790
The cw*-package targets were introduced in February 2015 as part of
adding support for building GCE images; but GCE support was reworked
in June 2015 and the cw*-package targets were in fact never used.
Remove them.
The *_DISK variables were introduced in February 2015 as part of
adding the cloudware-install target; this was removed in May 2016 as
the cloudware images are published via the respective cloud systems
and not published as disk images via the FreeBSD FTP site. As such,
the *_DISK variables are not unused; remove them.
releng/14.0 candidate.
Discussed with: gjb
Reviewed by: imp
MFC after: 5 days
Sponsored by: https://www.patreon.com/cperciva
Differential Revision: https://reviews.freebsd.org/D41789
We no longer install a default portsnap.conf, so the sed invocation just
generates an error.
Reviewed by: cperciva
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D42003
mergemaster was deprecated some time ago and will be removed from
FreeBSD 15.
Reviewed by: imp
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D41797
Headers from src/include were in the runtime-dev package but
subdirectories of src/include ended up in utilities-dev by default.
Neither package is a good choice - the headers in src/include are not
useful without the libraries contained in clibs-dev.
This moves the standard C headers to clibs-dev (C++ headers are already
in this package). While working on this, I found that various clang
libraries and headers were also bundled into utilities-dev by default
so these are also moved to clang-dev.
I also added a FreeBSD-build-essential meta package to make it simple to
install all the toolchain parts.
PR: 254173
Reviewed byb: manu
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D41815
Other cloud images do not do this, and it can produce confusing results.
Reviewed by: Jose Luis Duran, delphij
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D41751
To overcome package name changing on default Python version updates.
Approved by: gjb (re)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D41453
The pre-existing "ec2ami" target builds and uploads a single AMI
(with filesystem determined by ${VMFS}) as before; a new "ec2amis"
target does both UFS and ZFS.
Reviewed by: gjb
Sponsored by: https://www.patreon.com/cperciva
Differential Revision: https://reviews.freebsd.org/D41343
Prior to this commit, ${VMFS} controlled the filesystem used for
building EC2 images, but the AMIs were recorded with SSM Parameter
paths which indicated that they were UFS.
This commit (a) uses ${VMFS} in the SSM parameter path instead of
a hard-coded "ufs", and (b) adds the filesystem to the AMI name.
Reviewed by: gjb
Sponsored by: https://www.patreon.com/cperciva
Differential Revision: https://reviews.freebsd.org/D41342
New ${CW}_FSLIST settings control the list of filesystem types with which
each cloudware image will be built; currently these are all set to "ufs",
i.e. no change from previous.
The cloudware images have their filesystem type as part of their file
name; for backwards compatibilty the ${VMFS} image is linked to the
previously used file name. This compatibility can be removed once all
the cloudware uploading/publishing code has been updated to use the new
image names (possibly more than one of them).
Reviewed by: gjb
Sponsored by: https://www.patreon.com/cperciva
Differential Revision: https://reviews.freebsd.org/D41341
A new option 'VMFSLIST' controls the list of filesystems for which VM
images will be built; the default is to build both UFS and ZFS.
The vm-install target installs these as ${OSRELEASE}-${FS}.${FORMAT},
e.g. FreeBSD-14.0-CURRENT-amd64-zfs.vmdk. For backwards compatibility,
the ${VMFS} image is linked to the previously used ${OSRELEASE}.${FORMAT}
name.
Cloudware building will be updated in a later commit.
Reviewed by: gjb
Reviewed by: emaste, markj (previous version)
Sponsored by: https://www.patreon.com/cperciva
Differential Revision: https://reviews.freebsd.org/D41340
Add a FCROOTFSSZ variable which defaults to "1g" which controls the
size of the Firecracker root filesystem; it can be set as low as "300m"
at present.
Allow WITHOUTS to be overridden if users want to build a root disk with
more -- or fewer -- parts of the FreeBSD base system.
Reviewed by: gjb
Sponsored by: https://www.patreon.com/cperciva
Differential Revision: https://reviews.freebsd.org/D41041
This splits out the certctl utility into a new certctl package and the
openssl libs into an openssl-lib package.
PR: 272816
Reviewed by: manu
Differential Revision: https://reviews.freebsd.org/D41321
This spits out errors but seemingly isn't actually fatal, so was missed.
Fixes: 6853d893c7 ("release: Automatically generate MK_LIB${LIBCOMPAT} and lib${libcompat}-dbg lists")
The lang/python3 port had failed to properly install because
it did in fact already exist and FORCE_PKG_REGISTER was not
set. So, behaviorally everything here was correct. However,
installing lang/python3 is in fact not correct and not needed,
so only install the lang/python port to provide symbolic links.
PR: 272354
MFC after: 3 days
MFC with: 510fd83138
MFC with: cd8cad0ef5
MFC with: 0ed426276f
Sponsored by: GoFundMe https://www.gofundme.com/f/gjbbsd
This just stages the kernel and builds a stripped-down rootfs for use
with the Firecracker VMM. At some point in the future the release
engineering team might start publishing these, but initially it's
just here to simplify FreeBSD/Firecracker development and testing.
Note that the rootfs generated:
* Uses an IP address of 10.0.0.2 with a gateway of 10.0.0.1,
* Has sshd enabled,
* Has user "freebsd" with password "freebsd" and a root password
of "root", and
* Is 1 GB in size (but has growfs enabled).
All of those are subject to change without notice; anyone intending to
use FreeBSD/Firecracker in anything remotely resembling a production
environment should talk to cperciva first.
Reviewed by: gjb
Sponsored by: https://www.patreon.com/cperciva
Differential Revision: https://reviews.freebsd.org/D40956
