One leak happens when there is not enough memory to allocate the
the resources for streams. The other leak happens if the are
unknown parameters in the received INIT-ACK chunk which require
reporting and the INIT-ACK requires sending an ABORT due to illegal
parameter combinations.
Hopefully this fixes
https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=19083
MFC after: 1 week
With VIMAGE kernels modules get special treatment as they need
to also keep the original values and make copies for each instance.
For that a few pages of vnet modspace are provided and the
kernel-linker and the VNET framework know how to deal with things.
When the modspace is (almost) full, other modules which would
overflow the modspace cannot be loaded and kldload will fail.
ip_mroute uses a lot of variable space, mostly be four big arrays:
set_vnet 0000000000000510 vnet_entry_multicast_register_if
set_vnet 0000000000000700 vnet_entry_viftable
set_vnet 0000000000002000 vnet_entry_bw_meter_timers
set_vnet 0000000000002800 vnet_entry_bw_upcalls
Dynamically malloc the three big ones for each instance we need
and free them again on vnet teardown (the 4th is an ifnet).
That way they only need module space for a single pointer and
allow a lot more modules using virtualized variables to be loaded
on a VNET kernel.
PR: 206583
Reviewed by: hselasky, kp
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D22443
The adjustments are inspired by the Linux stack, which has had a
functionally equivalent implementation for more than a decade now.
Submitted by: Richard Scheffenegger
Reviewed by: Cheng Cui
Differential Revision: https://reviews.freebsd.org/D18982
This patch addresses a very common case of frequent application stalls,
where TCP runs idle and looses the state of the network.
Submitted by: Richard Scheffenegger
Reviewed by: Cheng Cui
Differential Revision: https://reviews.freebsd.org/D18954
After r354748-354750 all uses of the IP6_EXTHDR_CHECK() and
IP6_EXTHDR_GET() macros are gone from the kernel. IP6_EXTHDR_GET0()
was unused. Remove the macros and update the documentation.
Sponsored by: Netflix
While r354748 removed almost all IP6_EXTHDR_CHECK() calls, these
are not part of the PULLDOWN_TESTS.
Equally convert these IP6_EXTHDR_CHECK()s here to m_pullup() and remove
the extra check and m_pullup() in tcp_input() under isipv6 given
tcp6_input() has done exactly that pullup already.
MFC after: 8 weeks
Sponsored by: Netflix
In a few places we have IP6_EXTHDR_GET() left in upper layer protocols.
The IP6_EXTHDR_GET() macro might perform an m_pulldown() in case the data
fragment is not contiguous.
Convert these last remaining instances into m_pullup()s instead.
In CARP, for example, we will a few lines later call m_pullup() anyway,
the IPsec code coming from OpenBSD would otherwise have done the m_pullup()
and are copying the data a bit later anyway, so pulling it in seems no
better or worse.
Note: this leaves very few m_pulldown() cases behind in the tree and we
might want to consider removing them as well to make mbuf management
easier again on a path to variable size mbufs, especially given
m_pulldown() still has an issue not re-checking M_WRITEABLE().
Reviewed by: gallatin
MFC after: 8 weeks
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D22335
to the higher of the previous ssthresh or 3/4 of the prior cwnd.
Submitted by: Richard Scheffenegger
Reviewed by: Cheng Cui
Differential Revision: https://reviews.freebsd.org/D18982
In ip6_[direct_]input() we are looping over the extension headers
to deal with the next header. We pass a pointer to an mbuf pointer
to the handling functions. In certain cases the mbuf can be updated
there and we need to pass the new one back. That missing in
dest6_input() and route6_input(). In tcp6_input() we should also
update it before we call tcp_input().
In addition to that mark the mbuf NULL all the times when we return
that we are done with handling the packet and no next header should
be checked (IPPROTO_DONE). This will eventually allow us to assert
proper behaviour and catch the above kind of errors more easily,
expecting *mp to always be set.
This change is extracted from a larger patch and not an exhaustive
change across the entire stack yet.
PR: 240135
Reported by: prabhakar.lakhera gmail.com
MFC after: 3 weeks
Sponsored by: Netflix
handlers can be greatly simplified. All the previous double
cycling and complex locking was added to avoid these functions
holding global PCB locks for extended period of time, preventing
addition of new entries.
in the network epoch, we can greatly simplify synchronization.
Remove all unneccesary epoch enters hidden under INP_INFO_RLOCK macro.
Remove some unneccesary assertions and convert necessary ones into the
NET_EPOCH_ASSERT macro.
locking in udp_output() and udp6_output().
First, we select if we need read or write lock in PCB itself, we take
the lock and enter network epoch. Then, we proceed for the rest of
the function. In case if we need to modify PCB hash, we would take
write lock on it for a short piece of code.
We could exit the epoch before allocating an mbuf, but with this
patch we are keeping it all the way into ip_output()/ip6_output().
Today this creates an epoch recursion, since ip_output() enters epoch
itself. However, once all protocols are reviewed, ip_output() and
ip6_output() would require epoch instead of entering it.
Note: I'm not 100% sure that in udp6_output() the epoch is required.
We don't do PCB hash lookup for a bound socket. And all branches of
in6_select_src() don't require epoch, at least they lack assertions.
Today inet6 address list is protected by rmlock, although it is CKLIST.
AFAIU, the future plan is to protect it by network epoch. That would
require epoch in in6_select_src(). Anyway, in future ip6_output()
would require epoch, udp6_output() would need to enter it.
we lookup PCBs. Thus, do not enter epoch recursively in
in_pcblookup_hash() and in6_pcblookup_hash(). Same applies to
tcp_ctlinput() and tcp6_ctlinput().
This leaves several sysctl(9) handlers that return PCB credentials
unprotected. Add epoch enter/exit to all of them.
Differential Revision: https://reviews.freebsd.org/D22197
In preparation for another change factor out various variable cleanups.
These mainly include:
(1) do not assign values to variables during declaration: this makes
the code more readable and does allow for better grouping of
variable declarations,
(2) do not assign values to variables before need; e.g., if a variable
is only used in the 2nd half of a function and we have multiple
return paths before that, then do not set it before it is needed, and
(3) try to avoid assigning the same value multiple times.
MFC after: 3 weeks
Sponsored by: Netflix
In theory the eventhandler invoke should be in the same VNET as
the the current interface. We however cannot guarantee that for
all cases in the future.
So before checking if the fragmentation handling for this VNET
is active, switch the VNET to the VNET of the interface to always
get the one we want.
Reviewed by: hselasky
MFC after: 3 weeks
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D22153
happens is we are more delayed in the pacer calling in so
we remove the stack from the pacer and recalculate how
much time is left after all data has been acknowledged. However
the comparision was backwards so we end up with a negative
value in the last_pacing_delay time which causes us to
add in a huge value to the next pacing time thus stalling
the connection.
Reported by: vm2.finance@gmail.com
Thanks to cem@ for discussing the issue which resulted in this patch.
Reviewed by: cem@
Sponsored by: Netflix, Inc.
Differential Revision: https://reviews.freebsd.org/D22089
It remains unattached to any client protocol. Netdump is unaffected
(remaining half-duplex). The intended consumer is NetGDB.
Submitted by: John Reimer <john.reimer AT emc.com> (earlier version)
Discussed with: markj
Differential Revision: https://reviews.freebsd.org/D21541
Loosen requirements for connecting to debugnet-type servers. Only require a
destination address; the rest can theoretically be inferred from the routing
table.
Relax corresponding constraints in netdump(4) and move ifp validation to
debugnet connection time.
Submitted by: John Reimer <john.reimer AT emc.com> (earlier version)
Reviewed by: markj
Differential Revision: https://reviews.freebsd.org/D21482
Add a 'X -s <server> -c <client> [-g <gateway>] -i <interface>' subroutine
to the generic debugnet code. The imagined use is both netdump, shown here,
and NetGDB (vaporware). It uses the ddb(4) lexer, with some new extensions,
to parse out IPv4 addresses.
'Netdump' uses the generic debugnet routine to load a configuration and
start a dump, without any netdump configuration prior to panic.
Loosely derived from work by: John Reimer <john.reimer AT emc.com>
Reviewed by: markj
Differential Revision: https://reviews.freebsd.org/D21460
Debugnet is a simplistic and specialized panic- or debug-time reliable
datagram transport. It can drive a single connection at a time and is
currently unidirectional (debug/panic machine transmit to remote server
only).
It is mostly a verbatim code lift from netdump(4). Netdump(4) remains
the only consumer (until the rest of this patch series lands).
The INET-specific logic has been extracted somewhat more thoroughly than
previously in netdump(4), into debugnet_inet.c. UDP-layer logic and up, as
much as possible as is protocol-independent, remains in debugnet.c. The
separation is not perfect and future improvement is welcome. Supporting
INET6 is a long-term goal.
Much of the diff is "gratuitous" renaming from 'netdump_' or 'nd_' to
'debugnet_' or 'dn_' -- sorry. I thought keeping the netdump name on the
generic module would be more confusing than the refactoring.
The only functional change here is the mbuf allocation / tracking. Instead
of initiating solely on netdump-configured interface(s) at dumpon(8)
configuration time, we watch for any debugnet-enabled NIC for link
activation and query it for mbuf parameters at that time. If they exceed
the existing high-water mark allocation, we re-allocate and track the new
high-water mark. Otherwise, we leave the pre-panic mbuf allocation alone.
In a future patch in this series, this will allow initiating netdump from
panic ddb(4) without pre-panic configuration.
No other functional change intended.
Reviewed by: markj (earlier version)
Some discussion with: emaste, jhb
Objection from: marius
Differential Revision: https://reviews.freebsd.org/D21421
partial fragmented packets before a network interface is detached.
When sending IPv4 or IPv6 fragmented packets and a fragment is lost
before the network device is freed, the mbuf making up the fragment
will remain in the temporary hashed fragment list and cause a panic
when it times out due to accessing a freed network interface
structure.
1) Make sure the m_pkthdr.rcvif always points to a valid network
interface. Else the rcvif field should be set to NULL.
2) Use the rcvif of the last received fragment as m_pkthdr.rcvif for
the fully defragged packet, instead of the first received fragment.
Panic backtrace for IPv6:
panic()
icmp6_reflect() # tries to access rcvif->if_afdata[AF_INET6]->xxx
icmp6_error()
frag6_freef()
frag6_slowtimo()
pfslowtimo()
softclock_call_cc()
softclock()
ithread_loop()
Reviewed by: bz
Differential Revision: https://reviews.freebsd.org/D19622
MFC after: 1 week
Sponsored by: Mellanox Technologies
instead of calling an SCTP specific function from the IP code.
This is a requirement of supporting SCTP as a kernel loadable module.
This patch was developed by markj@, I tweaked a bit the SCTP related
code.
Submitted by: markj@
MFC after: 3 days
Previously they were defined in a header which was included exactly
once. Change this to follow the usual practice of putting definitions
in C files. No functional change intended.
Discussed with: tuexen
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Cast the pointers to (uintptr_t) before assigning to type
uint64_t. This eliminates an error from gcc when we cast the pointer
to a larger integer type.
