On arm64 (and possible other architectures) we are unable to use static
DPCPU data in kernel modules. This is because the compiler will generate
PC-relative accesses, however the runtime-linker expects to be able to
relocate these.
In preparation to fix this create two macros depending on if the data is
global or static.
Reviewed by: bz, emaste, markj
Sponsored by: ABT Systems Ltd
Differential Revision: https://reviews.freebsd.org/D16140
Add src.conf knob to disable the installation of /var/db/services.db
Default to leaving services.db in place, but allow the removal of the
file and its creation with a src.conf knob.
This file ends up being 2MB in size. For small systems this is a waste
of space but its a tradeoff.
Reviewed by: bdrewery
Differential Revision: https://reviews.freebsd.org/D9655
Several third-parties use at least some of these ioctls. While it would be
better for regression testing if they were used in base (or at least in the
test suite), it's currently not worth the trouble to push through removal.
Submitted by: antoine, markj
ACFLAGS is only used in addition to CFLAGS, so setting the options in
both was redundant. However, ACFLAGS is added to the command line
after CFLAGS, so the settings from ACFLAGS were applied for assembly
files in kernel modules after the kernel-specific march/abi in CFLAGS.
As a result, the hard-float ACFLAGS in bsd.cpu.mk was overriding the
soft-float CFLAGS.gcc in sys/conf/kern.mk. In particular,
dtrace_asm.o was compiled as hard-float and the linker refused to link
dtrace.ko since its object files contained a mix of hard and soft
float.
Reviewed by: br
Sponsored by: DARPA / AFRL
Differential Revision: https://reviews.freebsd.org/D16054
For developers gensnmptree can now generate functions for enums to convert
between enums and strings and to check the validity of a value.
The sources in FreeBSD are now in sync with the upstream which allows to
bring in IPv6 modifications.
API documented in previous version of uhid(4) man page has been obsolete
since May 2009 when old USB stack was replaced with USB2 implentation.
Current API has the same set of ioctl calls but uses usb_gen_descriptor
structure to pass data to/from kernel.
MFC after: 1 week
Update carp to set DSCP value CS7(Network Traffic) in the flowlabel field of
packets by default. Currently carp only sets TOS_LOWDELAY in IPv4 which was
deprecated in 1998. This also implements sysctl that can revert carp back to
it's old behavior if desired.
This will allow implementation of QOS on modern network devices to make sure
carp packets aren't dropped during interface contention.
Submitted by: Nick Wolff <darkfiberiru AT gmail.com>
Reviewed by: kp, mav (earlier version)
Differential Revision: https://reviews.freebsd.org/D14536
Several ioctls are unused in pf, in the sense that no base utility
references them. Additionally, a cursory review of pf-based ports
indicates they're not used elsewhere either. Some of them have been
unused since the original import. As far as I can tell, they're also
unused in OpenBSD. Finally, removing this code removes the need for
future pf work to take them into account.
Reviewed by: kp
Differential Revision: https://reviews.freebsd.org/D16076
This is needed for -m32 support which is used in the kernel cloudabi32 module.
Tweak the style to make it easier to understand.
MFC after: 2 weeks
X-MFC-with: r335706
Reported by: Mark Millard
Sponsored by: Dell EMC
Need to handle LLD_BOOTSTRAP separately (for archs like i386).
This would be much better off with an off-by-default option like
SHARED_TOOLCHAIN that universe force-enabled. Then a normal buildworld
would store the toolchain there if enabled and otherwise in WORLDTMP
with only the 1 arch selected.
MFC after: 3 weeks
Sponsored by: Dell EMC
LLVM_TARGET_* will auto be set based on LLVM_TARGET_ALL and MK_CLANG.
If LLVM_TARGET_ALL is disabled, during a cross-build, then SYSTEM_COMPILER
and SYSTEM_LINKER are auto disabled.
This option should be used by users rather than the per-arch LLVM_TARGET
options as it is simpler to maintain for them should the supported
target list change.
MFC after: 2 weeks
Reviewed by: sbruno, dim
Sponsored by: Dell EMC
Differential Revision: https://reviews.freebsd.org/D16020
Allow attaching of multiple geli providers at once if they use same
passphrase and keyfiles.
This is helpful when the providers being attached are not used for boot,
and therefore the existing code to first try the cached password when
tasting the providers during boot does not apply.
Multiple providers with the same passphrase and keyfiles can be attached
at the same time during system start-up by adding the following to
rc.conf:
geli_groups="storage backup"
geli_storage_flags="-k /etc/geli/storage.keys"
geli_storage_devices="ada0 ada1"
geli_backup_flags="-j /etc/geli/backup.passfile -k /etc/geli/backup.keys"
geli_backup_devices="ada2 ada3"
Reviewed by: wblock, delphij, jilles
Approved by: sobomax (src), bcr (doc)
Differential Revision: https://reviews.freebsd.org/D12644
To workaround buggy firmware that sets this flag when there's actually
a VGA present.
Reported and tested by: Yasuhiro KIMURA <yasu@utahime.org>
Sponsored by: Citrix Systems R&D
Reviewed by: kib
Differential revision: https://reviews.freebsd.org/D16003
Add documentation and symlinks for OF_getprop_alloc_multi
and OF_getencprop_alloc_multi functions.
Also while here fix copy-pasted .Dt value and add one more
failure condition for OF_getencprop_alloc.
r332341 introduced OF_getencprop_alloc_multi that should be used
instead of OF_getencprop_alloc to get multi-cell properties.
Fix example to reflect this change.
Normally pf rules are expected to do one of two things: pass the traffic or
block it. Blocking can be silent - "drop", or loud - "return", "return-rst",
"return-icmp". Yet there is a 3rd category of traffic passing through pf:
Packets matching a "pass" rule but when applying the rule fails. This happens
when redirection table is empty or when src node or state creation fails. Such
rules always fail silently without notifying the sender.
Allow users to configure this behaviour too, so that pf returns an error packet
in these cases.
PR: 226850
Submitted by: Kajetan Staszkiewicz <vegeta tuxpowered.net>
MFC after: 1 week
Sponsored by: InnoGames GmbH
This makes it possible, through src.conf(5) settings, to select which
LLVM targets you want to build during buildworld. The current list is:
* (WITH|WITHOUT)_LLVM_TARGET_AARCH64
* (WITH|WITHOUT)_LLVM_TARGET_ARM
* (WITH|WITHOUT)_LLVM_TARGET_MIPS
* (WITH|WITHOUT)_LLVM_TARGET_POWERPC
* (WITH|WITHOUT)_LLVM_TARGET_SPARC
* (WITH|WITHOUT)_LLVM_TARGET_X86
To not influence anything right now, all of these are on by default, in
situations where clang is enabled.
Selectively turning a few targets off manually should work. Turning on
only one target should work too, even if that target does not correspond
to the build architecture. (In that case, LLVM_NATIVE_ARCH will not be
defined, and you can only use the resulting clang executable for
cross-compiling.)
I performed a few measurements on one of the FreeBSD.org reference
machines, building clang from scratch, with all targets enabled, and
with only the x86 target enabled. The latter was ~12% faster in real
time (on a 32-core box), and ~14% faster in user time. For a full
buildworld the difference will probably be less pronounced, though.
Reviewed by: bdrewery
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D11077
This works similar to WITH_SYSTEM_COMPILER added in r300354. It only
supports lld via WITH_LLD_BOOTSTRAP.
When both SYSTEM_COMPILER and SYSTEM_LINKER logic passes then libclang
will not build in cross-tools. If either check fails though then
libclang is built.
The .info is reworked to notify when libclang will be built since if
either clang or lld needs to be rebuilt, but not the other, the
notification can lead to confusion on why "clang is building".
-fuse-ld= is not used with this method so some combinations of compiler
and linker are expected to fail.
A new 'make test-system-linker' target is added to see the logic results.
Makefile.inc1:
CROSS_BINUTILS_PREFIX support had to be moved higher up so that XLD
could be set and MK_LLD_BOOTSTRAP disabled before checking SYSTEM_LINKER
logic as done with SYSTEM_COMPILER. This also required moving where
bsd.linker.mk was read since XLD needs to be set before parsing it. This
creates a situation where src.opts.mk can not test LINKER_FEATURES or
add LLD_BOOTSTAP to BROKEN_OPTIONS.
Reviewed by: emaste (earlier version)
Sponsored by: Dell EMC
Differential Revision: https://reviews.freebsd.org/D15894
Implement a ddb function walking the namecache to do this.
Reviewed by: jhb, mjg
Inspired by: gdb macro from jhb (old version)
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D14898
try to build them if MK_OPENSSL is unset.
Reviewed by: emaste imp kevans
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D15211
The nvlist_append_{bool,number,string,nvlist,descriptor}_array() functions
allows to dynamically extend array stored in the nvlist.
Submitted by: Mindaugas Rasiukevicius <rmind@netbsd.org>
All information which are need for those operations is already stored in
the cookie.
We decided not to bump libnv version because this API is not used yet in the
base system.
Reviewed by: pjd
Aligns the build with the FreeBSD traditional approach to not build in
contrib/, and to track inter-dependencies between libraries.
With help from: bdrewery
Reviewed by: bdrewery, hselasky
Sponsored by: Mellanox Technologies
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D15648
objdump is sometimes used in cases where readelf is more appropriate,
but the obsolete GNU objdump we have in the base system will be removed
in the future.
.Xr readelf from elf.5 to improve the odds the more appropriate tool
will be found.
PR: 229046
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Implement MK_NVME now that the expression for where NVMe is
complicated. Default it to "yes" for x86 and powerpc64 and
no everywhere else. Use it in camcontrol to define WITH_NVME
for those platforms where we support nvme.
This should fix the newly introduced nvme files to camcontrol
which were building everywhere.
Pointy Hat To: imp
Sponsored by: Netflix
The handbooks are not installed there anymore. While here, improve the
URLs markup a bit.
Reviewed by: allanjude@
MFC after: 2 weeks
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D15793
Most kernel memory that is allocated after boot does not need to be
executable. There are a few exceptions. For example, kernel modules
do need executable memory, but they don't use UMA or malloc(9). The
BPF JIT compiler also needs executable memory and did use malloc(9)
until r317072.
(Note that a side effect of r316767 was that the "small allocation"
path in UMA on amd64 already returned non-executable memory. This
meant that some calls to malloc(9) or the UMA zone(9) allocator could
return executable memory, while others could return non-executable
memory. This change makes the behavior consistent.)
This change makes malloc(9) return non-executable memory unless the new
M_EXEC flag is specified. After this change, the UMA zone(9) allocator
will always return non-executable memory, and a KASSERT will catch
attempts to use the M_EXEC flag to allocate executable memory using
uma_zalloc() or its variants.
Allocations that do need executable memory have various choices. They
may use the M_EXEC flag to malloc(9), or they may use a different VM
interfact to obtain executable pages.
Now that malloc(9) again allows executable allocations, this change also
reverts most of r317072.
PR: 228927
Reviewed by: alc, kib, markj, jhb (previous version)
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D15691
Lack of functioning link and activity LEDs on devices without an EEPROM
is expected (not a bug). Quoting the EVB-LAN7850 User's Guide:
When configured with the default internal register settings, the
Ethernet Link status LEDs are not enabled. To enable Ethernet Link
status LEDs, enable the EEPROM.
This is an artifact of the different ways in which the evaluation board
can be used. End-user USB-Ethernet adapters using the Microchip LAN78XX
or LAN7515 controllers should use an EEPROM or have OTP configuration,
if their product configuration does not match the boot default register
configuration.
Sponsored by: The FreeBSD Foundation
Differences between LAN7800 and LAN7850 from the driver's perspective:
* The LAN7800 muxes EEPROM signals with LEDs, so LED mode needs to be
disabled when reading/writing EEPROM. The EEPROM is not muxed on the
LAN7850.
* The Linux driver enables automatic duplex and speed detection when
there is no EEPROM, for the LAN7800 only. With this FreeBSD driver
LAN7850-based adapters without a configuration EEPROM fail to link
(with or without the automatic duplex and speed detection code), so
I have just followed the example of the Linux driver for now.
Sponsored by: The FreeBSD Foundation
Sponsored by: Microchip (hardware)
These ioctls are not documented and only stubbed in a few drivers: mse(4),
psm(4) and syscon's sysmouse(4). The only exception is MOUSE_GETVARS
implemented in psm(4)
Given the fact that they were introduced 20 years ago and implementation
has never been completed, remove any related code.
PR: 228718 (exp-run)
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D15726
callbacks to perform additional cleanup actions at the time a socket is
closed.
Michio Honda presented a use for this at BSDCan 2018.
(See https://www.bsdcan.org/2018/schedule/events/965.en.html .)
Submitted by: Michio Honda <micchie at sfc.wide.ad.jp> (previous version)
Reviewed by: lstewart (previous version)
Differential Revision: https://reviews.freebsd.org/D15706
installworld should not be executing this anyhow but there is some
obscure case doing it still. The head(1) binary is not part of
ITOOLS and there's no need to add it.
MFC after: 1 week
Sponsored by: Dell EMC
of needed interface when many gif interfaces are present.
Remove rmlock from gif_softc, use epoch(9) and CK_LIST instead.
Move more AF-related code into AF-related locations.
Use hash table to speedup lookup of needed softc. Interfaces
with GIF_IGNORE_SOURCE flag are stored in plain CK_LIST.
Sysctl net.link.gif.parallel_tunnels is removed. The removal was planed
16 years ago, and actually it could work only for outbound direction.
Each protocol, that can be handled by if_gif(4) interface is registered
by separate encap handler, this helps avoid invoking the handler
for unrelated protocols (GRE, PIM, etc.).
This change allows dramatically improve performance when many gif(4)
interfaces are used.
Sponsored by: Yandex LLC
or 4 CPUs. Add a compile-time option SC_KERNEL_CONS_ATTRS to control the
defaults.
Default to color numbers in reverse order to CPU numbers (instead of
in the same order with white first and wrapping to dark grey), so that
the brightest bright colors are used first. Don't use dark grey at all;
replace it by dark green.
Syscons has too many compile-time options, but this one is needed in
in case the defaults give something like white on white, or the user
really hates this feature and can't wait to turn it off in rc.
MFC after: next release?
when to use assert, as well as providing a bad example of using
assert. While not strictly necessary, experience has shown issues
with poor assert choice happen often enough that this departure seems
warranted. Also, tighten up the previous example (there's no need
to have extra paragraphs or gratuitously long lines).
Reviewed by: emaste@ (earlier version)
The migration to LLVM's lld linker has been in progress for quite some
time - about three years ago I opened an upstream LLVM meta-bug to track
issues using lld as FreeBSD's linker, and about 1.5 years ago requested
the first exp-run with lld as the system linker.
As of r327783 we enabled LLD_BOOTSTRAP by default on amd64, using lld as
the linker to link the kernel and world, but GNU ld was still installed
as /usr/bin/ld.
The vast majority of issues observed when building ports with lld as the
system linker have now been solved, so set LLD_IS_LD by default on amd64
and install lld as /usr/bin/ld. A small number of port failures remain
and these will be addressed in the near future.
Thanks to antoine@ for handling the exp-runs, krion@ for investigating
many port failures and adding LLD_UNSAFE or other fixes or workarounds,
and everyone who helped investigate, fix or tag ports.
PR: 214864 (exp-run)
Sponsored by: The FreeBSD Foundation
The hardware rate limiting feature is enabled by the RATELIMIT kernel
option. Please refer to ifconfig(8) and the txrtlmt option and the
SO_MAX_PACING_RATE set socket option for more information. This
feature is compatible with hardware transmit send offload, TSO.
A set of sysctl(8) knobs under dev.mce.<N>.rate_limit are provided to
setup the ratelimit table and also to fine tune various rate limit
related parameters.
Sponsored by: Mellanox Technologies
It seems a shame to ruin the patina of the June 4, 1993 date
on abort.3, especially since it still matched the date of
the SCCS ID, but those are the rules.
Reported by: araujo
MFC after: 3 days
Sponsored by: Dell EMC
I didn't know abort2 existed until it was mentioned on a mailing list.
Mention it in related pages so others can find it easily.
MFC after: 3 days
Sponsored by: Dell EMC
The rescue/crunchgen build avoids linking binaries for the objects it is
building by doing 'make foo.o bar.o' rather than 'make all'. This breaks the
implicit 'beforebuild: depend' dependency which ensured that all source files
were generated and up-to-date before building the object files. This
manifested as a WITH_META_MODE build problem for bin/sh in the rescue build
with syntax.{c,h} not properly being regenerated or recognized as changed in
the dependency graph.
Sponsored by: Dell EMC
MFC after: 1 week
Reported by: many
- remove "all rights reserved" from my copyright on my extensive
contributions
- belatedly add my name to tuning.7 which I was a large contributor to
several years ago
This commit can also serve as implicit permission for any formatting or
non-substantive changes that FreeBSD wishes to make in the future.
There are risks associated with waiting on a preemptible epoch section.
Change the name to make them not be the default and document the issue
under CAVEATS.
Reported by: markj
storage, CDC ACM (serial), and CDC ECM (ethernet) at the same time.
It's quite similar in function to Linux' "g_multi" gadget.
Reviewed by: hselasky@
MFC after: 2 weeks
Relnotes: yes
Sponsored by: The FreeBSD Foundation
This driver was merged to HEAD one week prior to Exar publicly announcing they
had left the Ethernet market. It is not known to be used and has various code
quality issues spotted by Brooks and Hiren. Retire it in preparation for
FreeBSD 12.0.
Submitted by: kbowling
Reviewed by: brooks imp
Relnotes: yes
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D15442
Somehow two copies of the man was in the file, remove one.
Replace an occurence of 'SD/MMC' that was left from copy/paste.
Remove space before ':'
Reported by: 0mp
Each TCP connection that uses the system default cc_newreno(4) congestion
control algorithm module leaks a "struct newreno" (8 bytes of memory) at
connection initialisation time. The NULL-pointer dereference is only germane
when using the ABE feature, which is disabled by default.
While at it:
- Defer the allocation of memory until it is actually needed given that ABE is
optional and disabled by default.
- Document the ENOMEM errno in getsockopt(2)/setsockopt(2).
- Document ENOMEM and ENOBUFS in tcp(4) as being synonymous given that they are
used interchangeably throughout the code.
- Fix a few other nits also accidentally omitted from the original patch.
Reported by: Harsh Jain on freebsd-net@
Tested by: tjh@
Differential Revision: https://reviews.freebsd.org/D15358
freebsd-update depends on phttpget from portsnap. We could move phttpget
out of portsnap and build it as long as WITHOUT_FREEBSD_UPDATE and
WITHOUT_PORTSNAP are not both set, but for now just make the dependency
explicit.
PR: 228220
Reported by: Dries Michiels
Sponsored by: The FreeBSD Foundation
Libcasper and its modules have no static libraries so don't define
paths to them. This fixes LIBADD automatically adding DPADD
entries for casper.
Reported by: sbruno
Sponsored by: Dell EMC Isilon
This hardware isn't totally ancient, about equal to a mxge(4) or mlx4en(4),
but the company was sold to Exar which then promptly exited the Ethernet
business so the card was commercially available for under 2 years. On deep
search, the only usage of these cards I found was by the importing of the
driver. There are code quality issues identified by Brooks and Hiren and
no visible use nor maintainership that warrant removal from FreeBSD 12.0.
Submitted by: kbowling
Reviewed by: gnn brooks
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D15363
- Use Fx when referring to FreeBSD.
- Use Ql instead of Cm for command invocations.
- Remove some redundant Pp macros.
- Use a literal indented Bd instead of a series of Dl macros.
Submitted by: 0mp@
Reviewed by: eadler@
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D15126
As of r333461 we require ifunc support to link a working amd64 kernel.
The default in-tree bootstrap linker is lld and it has the required
support, as does any modern out-of-tree binutils linker. The in-tree
GNU ld is from binutils 2.17.50 and it does not have ifunc support,
so produce an error rather than a broken kernel.
Reviewed by: kib
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D15378
The existing patterns for 'cc --version' output do not work for GCC
built from the base/gcc port.
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D15357
The goal is to avoid using install directly so we can make changes the affect
how the entire system is installed, without having to touch many places.
This is part of the packaging base work.
Reviewed by: will
Approved by: bapt (mentor), allanjude (mentor)
Differential Revision: https://reviews.freebsd.org/D1513
This is part of packaging base work.
Reviewed by: will
Approved by: bapt (mentor), allanjude (mentor)
Differential Revision: https://reviews.freebsd.org/D15130
Rtld is not compatible with SSP, and since we link libc_pic.a to rtld
to have the basic support like memory and string copy functions, we
have to both carefully limit libc use, and to provide the ssp support
shims. This change makes the libc use in rtld more straighforward but
still limited, and allows to remove the shims, to be done in the next
commit.
Submitted by: Luis Pires
Reviewed by: bdrewery, brooks
Differential revision: https://reviews.freebsd.org/D15283
The original Berkeley Software Distributions were made in the 1980's
and 1990's. At that time, the Buenos Ares Convention of 1910 was in
force in most of the countries in the Americas. It required an
affirmative statement of rights reservation, typically using 'All
Rights Reserved.' The Regents included this phrase in their copyright
notices to invoke this treaty to ensure maximal copyright protection.
In the 1990's, Latin America coutries ratifeid the Berne Convention on
copyrights which prohibited them from requiring an affirmative
statement to reserve the rights. When Nicaragua ratified in 2000, the
Buenos Ares Convention of 1910 was effectively repealed. This made all
the 'All Rights Reserved' phrases obsolete and legal deadweight most
of the time, and certainly in the cases removed here.
Since it's no longer required, and is in fact meaningless, core has
decided to dropped it from the project's collection copyright and
sample templates. It encourages other rights holders to do the same
after consultation with their legal department.
More see https://en.wikipedia.org/wiki/Buenos_Aires_Convention for
more information.
Approved by: core@ (emaste@, jhb@)
Differential Review: https://reviews.freebsd.org/D15264
Currently when net.inet.carp.allow=0 CARP state remains as MASTER, which is
not very useful (if there are other masters -- it can lead to split brain,
if there are none -- it makes no sense). Having it as INIT makes it clear
that carp packets are disabled.
Submitted by: wg
MFC after: 1 month
Relnotes: yes
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D14477
This is a component of a system which lets the kernel dump core to
a remote host after a panic, rather than to a local storage device.
The server component is available in the ports tree. netdump is
particularly useful on diskless systems.
The netdump(4) man page contains some details describing the protocol.
Support for configuring netdump will be added to dumpon(8) in a future
commit. To use netdump, the kernel must have been compiled with the
NETDUMP option.
The initial revision of netdump was written by Darrell Anderson and
was integrated into Sandvine's OS, from which this version was derived.
Reviewed by: bdrewery, cem (earlier versions), julian, sbruno
MFC after: 1 month
X-MFC note: use a spare field in struct ifnet
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D15253
warning:
make[3]: "/usr/src/share/mk/bsd.prog.mk" line 274: warning: duplicate
script for target "_scriptsinstall" ignored
make[3]: "/usr/src/share/mk/bsd.prog.mk" line 274: warning: using
previous script for "_scriptsinstall" defined here
Reviewed by: kevans
It was an old TRE that had plenty of bugs and no performance gain over
regex(3). I disabled it by default in r323615, and there was some confusion
about what the knob does- likely due to poor naming on my part- to the tune
of "well, it sounds like it should speed things up" (mentioned by multiple
people).
To compound this, I have no intention of maintaining a second regex
implementation. If someone would like to step up and volunteer to maintain a
lean-and-mean implementation for grep, this is OK, but we have very few
volunteers to maintain even our primary regex implementation.
The rsu firmware license check has been disabled since r292756. Changes
rsu(4) since the license ack is no longer required.
While here, add `device rsufw` hint to the kernel configuration lines and
add/update paths to the installed license file in both rsu(4) and rsufw(4).
Submitted by: Mateusz Piotrowski (0mp)
Reviewed by: bcr (manpages)
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D14966
Currently 'man -k iflib' would find you the right pages for iflib
documentation, namely iflibdd(9) and iflibdi(9) but 'man iflib' would leave
you in the dark. This allows both approaches to find the relevant
documentation.
Reviewed by: kmacy, shurd
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D15219
Prior to this change the manual page documented ifdi_queues_alloc which has
been replaced by separate methods for tx and rx queues.
Reviewed by: kmacy, shurd
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D15218
As with Clang, build our toolchain components by default when the host
compiler is capable of doing so, to make them available for testing and
experimentation.
Sponsored by: The FreeBSD Foundation
This driver was for an early and uncommon legacy PCI 10GbE for a single
ASIC, Intel 82597EX. Intel quickly shifted to the long lived ixgbe family.
Submitted by: kbowling
Reviewed by: brooks imp jeffrey.e.pieper@intel.com
Relnotes: yes
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D15234
This driver supports legacy, 32-bit PCI devices, and had an ambiguous
license. Supported devices were already reported to be rare in 2003
(when an earlier version of the driver was removed in r123201).
Reviewed by: rgrimes
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D15245
This is a prequisite before we remove the driver from -current.
Reviewed by: emaste kbowling imp
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D15244
Previously it was possible to connect a socket (which had the
CAP_CONNECT right) by calling "connectat(AT_FDCWD, ...)" even in
capabilties mode. This combination should be treated the same as a call
to connect (i.e. forbidden in capabilities mode). Similarly for bindat.
Disable connectat/bindat with AT_FDCWD in capabilities mode, fix up the
documentation and add tests.
PR: 222632
Submitted by: Jan Kokemüller <jan.kokemueller@gmail.com>
Reviewed by: Domagoj Stolfa
MFC after: 1 week
Relnotes: Yes
Differential Revision: https://reviews.freebsd.org/D15221
Add a driver that match on 'rockchip,gpio-bank', this compatible
string is found on almost all RockChip SoC so this driver is compatible
with almost all of the RockChip SoCs.
The only features missing for this driver are :
- Interrupts support
- Debouncing
Add pinctrl driver for RockChip SoCs. This device manage which function
to set on which pin and some other properties like pull up/down, drive
strength etc ...
For now the driver only support RK3328 but it is versatile enough to
add support for other RockChip SoC in the future.
RockChip GRF (General Register Files) is present on almost all RockChip
SoC and is used to control some area of the system like iomuxing, gpio
or usb phy.
We need it to be probed and attached early in the boot process so
subclass syscon_generic and set the pass to BUS_PASS_BUS + BUS_PASS_ORDER_MIDDLE.
- Microsemi SCSI driver for PQI controllers.
- Found on newer model HP servers.
- Restrict to AMD64 only as per developer request.
The driver provides support for the new generation of PQI controllers
from Microsemi. This driver is the first SCSI driver to implement the PQI
queuing model and it will replace the aacraid driver for Adaptec Series 9
controllers. HARDWARE Controllers supported by the driver include:
HPE Gen10 Smart Array Controller Family
OEM Controllers based on the Microsemi Chipset.
Submitted by: deepak.ukey@microsemi.com
Relnotes: yes
Sponsored by: Microsemi
Differential Revision: https://reviews.freebsd.org/D14514
device-side (and only device-side) "virtual USB serial adapters" - the
ones you can get with an OTG-capable board - as consoles. It boils down
to adding the device name to kern.console sysctl, although doing that
requires jumping through some hoops. It doesn't change the actual
operation of those virtual devices. The point is to make it possible
for init(8) to recognize them as console devices and to launch getty(8)
for them, when configured as "onifconsole" in ttys(5). The point of
that, in turn, is to add such entries to the default ttys(5), so that
init(8) will launch gettys for device-side "virtual serial adapters",
but not for actual USB serial dongles.
Reviewed by: hselasky@
No objections: imp@
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
We intend to remove support before FreeBSD 12 is branched. These are
available only as 32-bit PCI devices. The driver has an ambiguous
license and I have not been successful in contacting the driver's author
in order to address this.
The planned deprecation has been announced on -current and -stable; if
we receive feedback that the driver is still useful and we are able to
resolve the license issue this deprecation notice can be reverted.
Reviewed by: bapt, brooks, imp, rgrimes
MFC after: 2 weeks
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D15182
I have changed my given name from Bruce to Rebecca, and my FreeBSD account
from brucec to bcran.
Update committers-src.dot and calendar.freebsd to show these changes.
Reviewed by: rrs
Differential Revision: https://reviews.freebsd.org/D15125
r332090 added a LINKER_TYPE test to add the --no-rosegment flag when
linking the i386 loader components with lld. Instead, introduce a
general mechanism for setting LDFLAGS for a specific linker type,
and use it for --no-rosegment.
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D14998
__riscv_float_abi_double macro will be defined by compiler.
The options are:
o lp64 __riscv_float_abi_soft
o lp64f __riscv_float_abi_single
o lp64d __riscv_float_abi_double
Sponsored by: DARPA, AFRL
Half of implementations always failed (returned (-1)) and they were
previously used in only one place.
Reviewed by: kib, andrew
Obtained from: CheriBSD
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D15102
Also remove the commented out documentation. The documentation arrived
with the import of the copy.9 manpage. I suspect the implementations
came from NetBSD while bootstrapping the Arm and MIPS ports.
Reviewed by: andrew, jmallett
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D15108
While Arcnet has some continued deployment in industrial controls, the
lack of drivers for any of the PCI, USB, or PCIe NICs on the market
suggests such users aren't running FreeBSD.
Evidence in the PR database suggests that the cm(4) driver (our sole
Arcnet NIC) was broken in 5.0 and has not worked since.
PR: 182297
Reviewed by: jhibbits, vangyzen
Relnotes: yes
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D15057
A few glyphs were converted incorrectly:
U+00A6 broken bar - center
U+2022 bullet - center
U+2026 horizontal ellipsis - move to bottom of character cell
This was inadvertently overriding the first found SYSDIR with the last
of /usr/src which could result in the wrong headers being used if not
building from /usr/src.
SYSDIR?= is not used here to avoid evaluating the exists() when unneeded.
Reported by: rgrimes, sjg, Mark Millard
Pointyhat to: bdrewery
Sponsored by: Dell EMC
Defines in net/if_media.h remain in case code copied from ifconfig is in
use elsewere (supporting non-existant media type is harmless).
Reviewed by: kib, jhb
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D15017
It's had a good life, but it's not really configurable and not really used.
Obtained from: opBSD (with some changes)
Differential Revision: https://reviews.freebsd.org/D14991
and VMware legal:
- Add a dual BSD-2 Clause/GPLv2 LICENSE file in the VMCI directory
- Remove the use of "All Rights Reserved"
- Per best practice, remove copyright/license info from Makefile
Reviewed by: imp, emaste, jhb, Vishnu Dasa <vdasa@vmware.com>
Approved by: VMware legal via Mark Peek <markpeek@vmware.com>
Differential Revision: https://reviews.freebsd.org/D14979
These have become unsorted from everything else. This is desync'd from
stable/11 due to some hand-merging that was done there, so the MFC of this
will look slightly different.
MFC after: 3 days
OpenCSD is an ARM CoreSight(tm) trace packets decoder.
- Connect libopencsd to the arm64 build.
- Install opencsd headers to /usr/include/opencsd/
Sponsored by: DARPA, AFRL
We intend to remove support before FreeBSD 12 is branched.
Reviewed by: imp, emaste
MFC after: 3 days
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D14890
The ocs_fc(4) driver supports the following hardware:
Emulex 16/8G FC GEN 5 HBAS
LPe15004 FC Host Bus Adapters
LPe160XX FC Host Bus Adapters
Emulex 32/16G FC GEN 6 HBAS
LPe3100X FC Host Bus Adapters
LPe3200X FC Host Bus Adapters
The driver supports target and initiator mode, and also supports FC-Tape.
Note that the driver only currently works on little endian platforms. It
is only included in the module build for amd64 and i386, and in GENERIC
on amd64 only.
Submitted by: Ram Kishore Vegesna <ram.vegesna@broadcom.com>
Reviewed by: mav
MFC after: 5 days
Relnotes: yes
Sponsored by: Broadcom
Differential Revision: https://reviews.freebsd.org/D11423
Add a new "interleave" allocation policy which stripes pages across
domains with a stride or width keeping contiguity within a multi-page
region.
Move the kernel to the dedicated numbered cpuset #2 making it possible
to assign kernel threads and memory policy separately from user. This
also eliminates the need for the complicated interrupt binding code.
Add a sysctl API for viewing and manipulating domainsets. Refactor some
of the cpuset_t manipulation code using the generic bitset type so that
it can be used for both. This probably belongs in a dedicated subr file.
Attempt to improve the include situation.
Reviewed by: kib
Discussed with: jhb (cpuset parts)
Tested by: pho (before review feedback)
Sponsored by: Netflix, Dell/EMC Isilon
Differential Revision: https://reviews.freebsd.org/D14839
For some reason, the other link - https://lists.FreeBSD.org/ - needs
the trailing slash, otherwise man(8) renders it in a weird way. No
idea why's that. At least try to be consistent. Revert it when the
other link gets fixed.
MFC after: 2 weeks
In a virtual machine, VMCI is exposed as a regular PCI device. The primary
communication mechanisms supported are a point-to-point bidirectional
transport based on a pair of memory-mapped queues, and asynchronous
notifications in the form of datagrams and doorbells. These features are
available to kernel level components such as vSockets through the VMCI
kernel API. In addition to this, the VMCI kernel API provides support for
receiving events related to the state of the VMCI communication channels,
and the virtual machine itself.
Submitted by: Vishnu Dasa <vdasa@vmware.com>
Reviewed by: bcr, imp
Obtained from: VMware
Differential Revision: https://reviews.freebsd.org/D14289
DTB Overlays are useful to change/add nodes to a dtb without the need to
modify it.
Add support for building dtbo during buildkernel.
The goal of DTBO present in the FreeBSD source tree is to fill a gap in
time when we submit changes upstream (Linux). Instead of waiting 2 to 4 months
we can add a DTBO in tree in the meantime.
This is not for adding DTBO for capes/hat/addon boards, those will be
better to put in a ports.
This is also not for enabling a i2c/spi/pwm controller on certain pins,
each user have a different use case for those (which pins to use etc ...)
and we cannot have all possible configuration.
Add a dtbo for sun8i-h3-sid which add the SID node missing in upstream dts.
Reviewed by: kevans
Differential Revision: https://reviews.freebsd.org/D14782
Forwarded packets passed through PFIL_OUT, which made it difficult for
firewalls to figure out if they were forwarding or producing packets. This in
turn is an issue for pf for IPv6 fragment handling: it needs to call
ip6_output() or ip6_forward() to handle the fragments. Figuring out which was
difficult (and until now, incorrect).
Having pfil distinguish the two removes an ugly piece of code from pf.
Introduce a new variant of the netpfil callbacks with a flags variable, which
has PFIL_FWD set for forwarded packets. This allows pf to reliably work out if
a packet is forwarded.
Reviewed by: ae, kevans
Differential Revision: https://reviews.freebsd.org/D13715
from jailed process. These might get implemented in jails in the
future, but for now they are not supported.
Discussed on: freebsd-security@
Reviewed by: brueffer@
MFC after: 2 weeks
altq(4) to match altq(9). This makes preserving the history section as the
author of ALTQ easier in the history section, rather than calling it a framework
in the description & a system in the history.
Add a history section to altq(4) and extend the history section in altq(9)
Approved by: bcr (mentor)
MFC after: 5 days
Differential Revision: https://reviews.freebsd.org/D14774
