Disassemble a one-for-all soshutdown() into protocol specific methods.
This creates a small amount of copy & paste, but makes code a lot more
self documented, as protocol specific method would execute only the code
that is relevant to that protocol and nothing else. This also fixes a
couple recent regressions and reduces risk of future regressions. The
extended KPI for the new pr_shutdown removes need for the extra pr_flush
which was added for the sake of SCTP which could not perform its shutdown
properly with the old one. Particularly for SCTP this change streamlines
a lot of code.
Some notes on why certain parts of code were copied or were not to certain
protocols:
* The (SS_ISCONNECTED | SS_ISCONNECTING | SS_ISDISCONNECTING) check is
needed only for those protocols that may be connected or disconnected.
* The above reduces into only SS_ISCONNECTED for those protocols that
always connect instantly.
* The ENOTCONN and continue processing hack is left only for datagram
protocols.
* The SOLISTENING(so) block is copied to those protocols that listen(2).
* sorflush() on SHUT_RD is copied almost to every protocol, but that
will be refactored later.
* wakeup(&so->so_timeo) is copied to protocols that can make a non-instant
connect(2), can SO_LINGER or can accept(2).
There are three protocols (netgraph(4), Bluetooth, SDP) that did not have
pr_shutdown, but old soshutdown() would still perform sorflush() on
SHUT_RD for them and also wakeup(9). Those protocols partially supported
shutdown(2) returning EOPNOTSUP for SHUT_WR/SHUT_RDWR, now they fully lost
shutdown(2) support. I'm pretty sure netgraph(4) and Bluetooth are okay
about that and SDP is almost abandoned anyway.
Reviewed by: tuexen
Differential Revision: https://reviews.freebsd.org/D43413
Just like it was done for accept(2) in cfb1e92912, use same approach
for two simplier syscalls that return socket addresses. Although,
these two syscalls aren't performance critical, this change generalizes
some code between 3 syscalls trimming code size.
Following example of accept(2), provide VNET-aware and INVARIANT-checking
wrappers sopeeraddr() and sosockaddr() around protosw methods.
Reviewed by: tuexen
Differential Revision: https://reviews.freebsd.org/D42694
Let the accept functions provide stack memory for protocols to fill it in.
Generic code should provide sockaddr_storage, specialized code may provide
smaller structure.
While rewriting accept(2) make 'addrlen' a true in/out parameter, reporting
required length in case if provided length was insufficient. Our manual
page accept(2) and POSIX don't explicitly require that, but one can read
the text as they do. Linux also does that. Update tests accordingly.
Reviewed by: rscheff, tuexen, zlei, dchagin
Differential Revision: https://reviews.freebsd.org/D42635
Apply the following automated changes to try to eliminate
no-longer-needed sys/cdefs.h includes as well as now-empty
blank lines in a row.
Remove /^#if.*\n#endif.*\n#include\s+<sys/cdefs.h>.*\n/
Remove /\n+#include\s+<sys/cdefs.h>.*\n+#if.*\n#endif.*\n+/
Remove /\n+#if.*\n#endif.*\n+/
Remove /^#if.*\n#endif.*\n/
Remove /\n+#include\s+<sys/cdefs.h>\n#include\s+<sys/types.h>/
Remove /\n+#include\s+<sys/cdefs.h>\n#include\s+<sys/param.h>/
Remove /\n+#include\s+<sys/cdefs.h>\n#include\s+<sys/capsicum.h>/
Sponsored by: Netflix
Remove ancient SCCS tags from the tree, automated scripting, with two
minor fixup to keep things compiling. All the common forms in the tree
were removed with a perl script.
Sponsored by: Netflix
Allow to set custom per-protocol handlers for the socket buffers
ioctls by introducing pr_setsbopt callback with the default value
set to the currently-used sbsetopt().
Reviewed by: glebius
Differential Revision: https://reviews.freebsd.org/D36746
Since 4.4BSD the protosw was used to implement socket types created
by socket(2) syscall and at the same to demultiplex incoming IPv4
datagrams (later copied to IPv6). This story ended with 78b1fc05b2.
These entries (e.g. IPPROTO_ICMP) in inetsw that were added to catch
packets in ip_input(), they would also be returned by pffindproto()
if user says socket(AF_INET, SOCK_RAW, IPPROTO_ICMP). Thus, for raw
sockets to work correctly, all the entries were pointing at raw_usrreq
differentiating only in the value of pr_protocol.
With 78b1fc05b2 all these entries are no longer needed, as ip_protox
is independent of protosw. Any socket syscall requesting SOCK_RAW type
would end up with rip_protosw. And this protosw has its pr_protocol
set to 0, allowing to mark socket with any protocol.
For IPv6 raw socket the change required two small fixes:
o Validate user provided protocol value
o Always use protocol number stored in inp in rip6_attach, instead
of protosw value, which is now always 0.
Differential revision: https://reviews.freebsd.org/D36380
domain_init() called at SI_SUB_PROTO_DOMAIN/SI_ORDER_SECOND is always
called right after domain_add(), that had been called at SI_ORDER_FIRST.
Note that protocols aren't initialized yet at this point, since they are
usually scheduled to initialize at SI_ORDER_THIRD.
After this merge it becomes clear that DOMF_SUPPORTED / DOMF_INITED
can be garbage collected as they are set & checked in the same function.
For initialization of the domain system itself it is now clear that
domaininit() can be garbage collected and static initializer is enough.
o Statically initialize max_linkhdr to default value without relying
on domain(9) code doing that.
o Statically initialize max_protohdr to a sane value, without relying
on TCP being always compiled in.
o Retire max_datalen. Set, but not used.
o Don't make the domain(9) system responsible in validating these
values and updating max_hdr. Instead provide KPI max_linkhdr_grow()
and max_protohdr_grow().
o Call max_linkhdr_grow() from IEEE802.11 and max_protohdr_grow() from
TCP. Those are the only protocols today that may want to grow.
Reviewed by: tuexen
Differential revision: https://reviews.freebsd.org/D36376
o Assert that every protosw has pr_attach. Now this structure is
only for socket protocols declarations and nothing else.
o Merge struct pr_usrreqs into struct protosw. This was suggested
in 1996 by wollman@ (see 7b187005d1), and later reiterated
in 2006 by rwatson@ (see 6fbb9cf860).
o Make struct domain hold a variable sized array of protosw pointers.
For most protocols these pointers are initialized statically.
Those domains that may have loadable protocols have spacers. IPv4
and IPv6 have 8 spacers each (andre@ dff3237ee5).
o For inetsw and inet6sw leave a comment noting that many protosw
entries very likely are dead code.
o Refactor pf_proto_[un]register() into protosw_[un]register().
o Isolate pr_*_notsupp() methods into uipc_domain.c
Reviewed by: melifaro
Differential revision: https://reviews.freebsd.org/D36232
The method was called for two different conditions: 1) the VM layer is
low on pages or 2) one of UMA zones of mbuf allocator exhausted.
This change 2) into a new event handler, but all affected network
subsystems modified to subscribe to both, so this change shall not
bring functional changes under different low memory situations.
There were three subsystems still using pr_drain: TCP, SCTP and frag6.
The latter had its protosw entry for the only reason to register its
pr_drain method.
Reviewed by: tuexen, melifaro
Differential revision: https://reviews.freebsd.org/D36164
They were useful many years ago, when the callwheel was not efficient,
and the kernel tried to have as little callout entries scheduled as
possible.
Reviewed by: tuexen, melifaro
Differential revision: https://reviews.freebsd.org/D36163
The protosw KPI historically has implemented two quite orthogonal
things: protocols that implement a certain kind of socket, and
protocols that are IPv4/IPv6 protocol. These two things do not
make one-to-one correspondence. The pr_input and pr_ctlinput methods
were utilized only in IP protocols. This strange duality required
IP protocols that doesn't have a socket to declare protosw, e.g.
carp(4). On the other hand developers of socket protocols thought
that they need to define pr_input/pr_ctlinput always, which lead to
strange dead code, e.g. div_input() or sdp_ctlinput().
With this change pr_input and pr_ctlinput as part of protosw disappear
and IPv4/IPv6 get their private single level protocol switch table
ip_protox[] and ip6_protox[] respectively, pointing at array of
ipproto_input_t functions. The pr_ctlinput that was used for
control input coming from the network (ICMP, ICMPv6) is now represented
by ip_ctlprotox[] and ip6_ctlprotox[].
ipproto_register() becomes the only official way to register in the
table. Those protocols that were always static and unlikely anybody
is interested in making them loadable, are now registered by ip_init(),
ip6_init(). An IP protocol that considers itself unloadable shall
register itself within its own private SYSINIT().
Reviewed by: tuexen, melifaro
Differential revision: https://reviews.freebsd.org/D36157
Add domain_remove() SYSUNINT callback that removes the domain
from the domain list if it has DOMF_UNLOADABLE flag set.
This change is required to support netlink ( D36002 ).
Reviewed by: glebius
Differential Revision: https://reviews.freebsd.org/D36173
This is expensive and useless call. It has been useless since Alexander
melifaro@ moved the forwarding table to nexthops with passive invalidation.
What happens now is that cached route in a inpcb would get invalidated
on next ip_output().
These were the last users of pfctlinput(), so garbage collect it.
Reviewed by: melifaro
Differential revision: https://reviews.freebsd.org/D36156
The only place to execute this method was raw_usend(). Only those
protocols that used raw socket were able to actually enter that method.
All pr_output assignments being deleted by this commit were a dead code
for many years.
Reviewed by: melifaro
Differential revision: https://reviews.freebsd.org/D36126
Now that each module handles its global and VNET initialization
itself, there is no VNET related stuff left to do in domain_init().
Differential revision: https://reviews.freebsd.org/D33541
There left only three modules that used dom_init(). And netipsec
was the last one to use dom_destroy().
Differential revision: https://reviews.freebsd.org/D33540
The function now modifies pr_usrreqs only, which are always
global. Rename it to pr_usrreqs_init().
Differential revision: https://reviews.freebsd.org/D33538
The historical BSD network stack loop that rolls over domains and
over protocols has no advantages over more modern SYSINIT(9).
While doing the sweep, split global and per-VNET initializers.
Getting rid of pr_init allows to achieve several things:
o Get rid of ifdef's that protect against double foo_init() when
both INET and INET6 are compiled in.
o Isolate initializers statically to the module they init.
o Makes code easier to understand and maintain.
Reviewed by: melifaro
Differential revision: https://reviews.freebsd.org/D33537
When traversing a list of interface addresses, we need to be in a net
epoch section, and protocol ctlinput routines need a stable reference to
the address.
Reported by: syzbot+3219af764ead146a3a4e@syzkaller.appspotmail.com
Reviewed by: kp, melifaro
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D31889
domain_init() gets reinvoked for each vnet on a system, so we must not
alter global state. Practically speaking, we were creating circular
lists and tying up a softclock thread into an infinite loop.
The breakage here was most easily observed by simply creating a jail
in a new vnet and watching the system suddenly become erratic.
Reported by: markj
Fixes: e0a17c3f06 ("uipc: create dedicated lists for fast ...")
Pointy hat: kevans
This avoids having to walk all possible protocols only to check if they
have one (vast majority does not).
Original patch by kevans@.
Reviewed by: kevans
Sponsored by: Rubicon Communications, LLC ("Netgate")
I can see two concerns for adding domains after domainfinalize:
1.) The slow/fast callouts have already been setup.
2.) Userland could create a socket while we're in the middle of
initialization.
We can address #1 fairly easily by tracking whether the domain's been
initialized for at least the default vnet. There are still some concerns
about the callbacks being invoked while a vnet is in the process of
being created/destroyed, but this is a pre-existing issue that the
callbacks must coordinate anyways.
We should also address #2, but technically this has been an issue
anyways because we don't assert on post-domainfinalize additions; we
don't seem to hit it in practice.
Future work can fix that up to make sure we don't find partially
constructed domains, but care must be taken to make sure that at least,
e.g., the usages of pffindproto in ip_input.c can still find them.
Differential Revision: https://reviews.freebsd.org/D25459
This gives any given domain a chance to indicate that it's not actually
supported on the current system. If dom_probe isn't supplied, we assume
the domain is universally applicable as most of them are. Keeping
fully-initialized and registered domains around that physically can't
work on a large majority of FreeBSD deployments is sub-optimal and leads
to errors that aren't consistent with the reality of why the socket
can't be created (e.g. ESOCKTNOSUPPORT) because such scenario has to be
caught upon pru_attach, at which point kicking back the more-appropriate
EAFNOSUPPORT would seem weird.
The initial consumer of this will be hvsock, which is only available on
HyperV guests.
Reviewed by: cem (earlier version), bcr (manpages)
Differential Revision: https://reviews.freebsd.org/D25062
subsystems tend to need to know about it, and including if_var.h is
huge header pollution for them. Polluting possible non-network
users with single symbol seems much lesser evil.
- Remove non-preemptible network epoch. Not used yet, and unlikely
to get used in close future.
Mainly focus on files that use BSD 3-Clause license.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
Special thanks to Wind River for providing access to "The Duke of
Highlander" tool: an older (2014) run over FreeBSD tree was useful as a
starting point.
specific order. VNET_SYSUNINITs however are doing exactly that.
Thus remove the VIMAGE conditional field from the domain(9) protosw
structure and replace it with VNET_SYSUNINITs.
This also allows us to change some order and to make the teardown functions
file local static.
Also convert divert(4) as it uses the same mechanism ip(4) and ip6(4) use
internally.
Slightly reshuffle the SI_SUB_* fields in kernel.h and add a new ones, e.g.,
for pfil consumers (firewalls), partially for this commit and for others
to come.
Reviewed by: gnn, tuexen (sctp), jhb (kernel.h)
Obtained from: projects/vnet
MFC after: 2 weeks
X-MFC: do not remove pr_destroy
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D6652
years for head. However, it is continuously misused as the mpsafe argument
for callout_init(9). Deprecate the flag and clean up callout_init() calls
to make them more consistent.
Differential Revision: https://reviews.freebsd.org/D2613
Reviewed by: jhb
MFC after: 2 weeks
sending not ready data:
o Add new flag to pru_send() flags - PRUS_NOTREADY.
o Add new protocol method pru_ready().
Sponsored by: Nginx, Inc.
Sponsored by: Netflix
int bindat(int fd, int s, const struct sockaddr *addr, socklen_t addrlen);
int connectat(int fd, int s, const struct sockaddr *name, socklen_t namelen);
which allow to bind and connect respectively to a UNIX domain socket with a
path relative to the directory associated with the given file descriptor 'fd'.
- Add manual pages for the new syscalls.
- Make the new syscalls available for processes in capability mode sandbox.
- Add capability rights CAP_BINDAT and CAP_CONNECTAT that has to be present on
the directory descriptor for the syscalls to work.
- Update audit(4) to support those two new syscalls and to handle path
in sockaddr_un structure relative to the given directory descriptor.
- Update procstat(1) to recognize the new capability rights.
- Document the new capability rights in cap_rights_limit(2).
Sponsored by: The FreeBSD Foundation
Discussed with: rwatson, jilles, kib, des
EPROTONOSUPPORT if the address family is not supported.
- introduce pffinddomain() to find a domain by family and use it as
appropriate.
Reviewed by: glebius
pf_proto_register(), iterate over all existing vnets to call protosw_init()
and thus the appropriate .pr_init() handler in the context of each vnet.
NB in the future we probably want to separate pr_init() handlers into
two, i.e. per-vnet and global, functions.
This change has no impact on nooptions VIMAGE builds.
Approved by: re (rwatson), julian (mentor)
MFC after: 3 days
vnet.h, we now use jails (rather than vimages) as the abstraction
for virtualization management, and what remained was specific to
virtual network stacks. Minor cleanups are done in the process,
and comments updated to reflect these changes.
Reviewed by: bz
Approved by: re (vimage blanket)
network stacks, VNET_SYSINIT:
- Add VNET_SYSINIT and VNET_SYSUNINIT macros to declare events that will
occur each time a network stack is instantiated and destroyed. In the
!VIMAGE case, these are simply mapped into regular SYSINIT/SYSUNINIT.
For the VIMAGE case, we instead use SYSINIT's to track their order and
properties on registration, using them for each vnet when created/
destroyed, or immediately on module load for already-started vnets.
- Remove vnet_modinfo mechanism that existed to serve this purpose
previously, as well as its dependency scheme: we now just use the
SYSINIT ordering scheme.
- Implement VNET_DOMAIN_SET() to allow protocol domains to declare that
they want init functions to be called for each virtual network stack
rather than just once at boot, compiling down to DOMAIN_SET() in the
non-VIMAGE case.
- Walk all virtualized kernel subsystems and make use of these instead
of modinfo or DOMAIN_SET() for init/uninit events. In some cases,
convert modular components from using modevent to using sysinit (where
appropriate). In some cases, do minor rejuggling of SYSINIT ordering
to make room for or better manage events.
Portions submitted by: jhb (VNET_SYSINIT), bz (cleanup)
Discussed with: jhb, bz, julian, zec
Reviewed by: bz
Approved by: re (VIMAGE blanket)