These have become unsorted from everything else. This is desync'd from
stable/11 due to some hand-merging that was done there, so the MFC of this
will look slightly different.
MFC after: 3 days
OpenCSD is an ARM CoreSight(tm) trace packets decoder.
- Connect libopencsd to the arm64 build.
- Install opencsd headers to /usr/include/opencsd/
Sponsored by: DARPA, AFRL
DTB Overlays are useful to change/add nodes to a dtb without the need to
modify it.
Add support for building dtbo during buildkernel.
The goal of DTBO present in the FreeBSD source tree is to fill a gap in
time when we submit changes upstream (Linux). Instead of waiting 2 to 4 months
we can add a DTBO in tree in the meantime.
This is not for adding DTBO for capes/hat/addon boards, those will be
better to put in a ports.
This is also not for enabling a i2c/spi/pwm controller on certain pins,
each user have a different use case for those (which pins to use etc ...)
and we cannot have all possible configuration.
Add a dtbo for sun8i-h3-sid which add the SID node missing in upstream dts.
Reviewed by: kevans
Differential Revision: https://reviews.freebsd.org/D14782
This is originally based on a patch from David Chisnall for soft-float
N64 but has since been updated to support O32, N32, and hard-float ABIs.
The soft-float O32, N32, and N64 support has been committed upstream.
The hard-float changes are still in review upstream.
Enable LLVM_LIBUNWIND on mips when building with a suitable (C+11-capable)
toolchain. This has been tested with external GCC for all ABIs and
O32 and N64 with clang.
Reviewed by: emaste
Obtained from: CheriBSD (original N64 patch)
Sponsored by: DARPA / AFRL
Differential Revision: https://reviews.freebsd.org/D14701
ConnectX-4/5 devices in mlx5core.
The dump is obtained by reading a predefined register map from the
non-destructive crspace, accessible by the vendor-specific PCIe
capability (VSC). The dump is stored in preallocated kernel memory and
managed by the mlx5tool(8), which communicates with the driver using a
character device node.
The utility allows to store the dump in format
<address> <value>
into a file, to reset the dump content, and to manually initiate the
dump.
A call to mlx5_fwdump() should be added at the places where a dump
must be fetched automatically. The most likely place is right before a
firmware reset request.
Submitted by: kib@
MFC after: 1 week
Sponsored by: Mellanox Technologies
LLD is a cross toolchain component. It shouldn't be built when
requesting a build without building a cross compiler.
(CROSS_COMPILER is somewhat unfortunately named; in any case, lld
should be treated as GNU binutils here.)
Submitted by: Dan McGregor <dan.mcgregor at usask.ca>
MFC after: 1 week
A sub-make, such as in 'make buildworld', may want to override MAKEOBJDIRPREFIX
but is unable to do so if src-env.conf is forcing it to another value. Without
using '?=' the sub-make may use the wrong .OBJDIR.
Reported by: eadler
Sponsored by: Dell EMC
Makefile.${MACHINE_ARCH} and remove the now-empty files. Generate the
*32 directories on the necessary architectures (well, currently only
amd64) on the fly. Remove LOADER_EFI variable and co-locate it with
EFI.
Differential Review: https://reviews.freebsd.org/D14546
It was originally written by Sun as part of the STF (Solaris test framework).
They open sourced it in OpenSolaris, then HighCloud partially ported it to
FreeBSD, and Spectra Logic finished the port. We also added many testcases,
fixed many broken ones, and converted them all to the ATF framework. We've had
help along the way from avg, araujo, smh, and brd.
By default most of the tests are disabled. Set the disks Kyua variable to
enable them.
Submitted by: asomers, will, justing, ken, brd, avg, araujo, smh
Sponsored by: Spectra Logic Corp, HighCloud
This code, which is basically `svnversion || svnliteversion`, generates
2 fstatat(2) for every directory in PATH for every Makefile parsed that
includes bsd.own.mk. This can add up for things like generating a Ports
index (Poudriere) or building a dependency graph for base.
Sponsored by: Dell EMC
MFC after: 2 weeks
OK. We don't really need a bsd.stand.mk, and it was causing a -fPIC
for the toolchain to be added (bogusly) when building on amd64. Pull
all relevant defs back into defs.mk and delete bsd.stand.mk.
This saves about 15-20k on i386 loader and zfsloader which when
combined with Lua give us a lot more stack space in those constrained
environments.
liblua glues the lua run time into the boot loader. It implements all
the runtime routines that lua expects. In addition, it has a few
standard 'C' headers that nueter various aspects of the LUA build that
are too specific to lua to be in libsa. Many refinements from the
original code to improve implementation and the number of included lua
libraries. Use int64_t for lua_Number. Have "/boot/lua" be the default
module path. Numerous cleanups from the original GSoC project,
including hacking libsa to allow lua to be built with only one change
outside luaconf.h.
Add the final bit of lua glue to bring in liblua and plug into the
multiple interpreter framework, previously committed.
Add LOADER_LUA option, currently off by default.
Presently, this is an experimental option. One must opt-in to using
this by defining WITH_LOADER_LUA and WITHOUT_FORTH. It's been
lightly tested, so keep a backup copy of your old loader handy.
The menu code, coming in the next commit, hasn't been exhaustively
tested. A LUA boot loader is 60k larger than a FORTH one, which is
80k larger than a no-interpreter one. Subtle changes in size
may tip things past some subtle limit (the binary is ~430k now
when built with LUA). A future version may offer coexistance.
Bump FreeBSD version to 1200058 to mark the milestone.
Pedro Souza's 2014 Summer of Code project. Rui Paulo, Pedro Arthur,
Zakary Nafziger and Wojciech A. Koszek also contributed. Warner Losh
reworked it extensively into its current form.
Obtained from: https://wiki.freebsd.org/SummerOfCode2014/LuaLoader
Sponsored by: Google Summer of Code
Relnotes: Yes
MFC After: 1 month
Differential Review: https://reviews.freebsd.org/D14295
Introduce WITH_/WITHOUT_LLVM_COV to match GCC's WITH_/WITHOUT_GCOV.
It is intended to provide a superset of the interface and functionality
of gcov.
It is enabled by default when building Clang, similarly to gcov and GCC.
This change moves one file in libllvm to be compiled unconditionally.
Previously it was included only when WITH_CLANG_EXTRAS was set, but the
complexity of a new special case for (CLANG_EXTRAS | LLVM_COV) is not
worth avoiding a tiny increase in build time.
Reviewed by: dim, imp
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D142645
These features indicate that the compiler and linker support the
retpoline speculative execution vulnerability (CVE-2017-5715)
mitigation.
Reviewed by: dim, imp
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D14228
has been switched to libedit long ago, libreadline was built as an
internallib for a while and kept only for gdbtui which was broken using
libreadline.
Since gdb has been mostly deorbitted in all arches, gdbtui was only installed
on arm and sparc64, given it has been removed, gdb has been switched to use
libedit, no consumers are left for libreadline. Thus this removal
libregex is a regex(3) implementation intended to feature GNU extensions and
any other non-POSIX compliant extensions that are deemed worthy.
These extensions are separated out into a separate library for the sake of
not cluttering up libc further with them as well as not deteriorating the
speed (or lack thereof) of the libc implementation.
libregex is implemented as a build of the libc implementation with LIBREGEX
defined to distinguish this from a libc build. The reasons for
implementation like this are two-fold:
1.) Maintenance- This reduces the overhead induced by adding yet another
regex implementation to base.
2.) Ease of use- Flipping on GNU extensions will be as simple as linking
against libregex, and POSIX-compliant compilations can be guaranteed with a
REG_POSIX cflag that should be ignored by libc/regex and disables extensions
in libregex. It is also easier to keep REG_POSIX sane and POSIX pure when
implemented in this fashion.
Tests are added for future functionality, but left disconnected for the time
being while other testing is done.
Reviewed by: cem (previous version)
Differential Revision: https://reviews.freebsd.org/D12934
There's a report of some regression in ports. Revert for now for an
exp run for this change in isolation (previous lld exp run also included
switching the linker used for ports to lld).
Also revert the src.conf.5 regeneration in r327824.
Reported by: antoine
Sponsored by: The FreeBSD Foundation
Another solution would be to extend the Makefile.sys.inc idea, or a .no_obj
file, to more places but I would rather keep that limited to the top-level
build for now to not impact performance (statting a file in every make call)
or to bring unintended side-effects.
Reported by: jhb, imp
Sponsored by: Dell EMC Isilon
Akin to r327783 for amd64. lld has been usable for amd64 for quite some
time, but a couple of issues remained that affected i386. These were
recently addressed upstream in lld and merged into FreeBSD (r326831,
r326879, r326897, r326957), so we can now use ld.lld on i386 as well.
Similarly to amd64 this change enables lld only as the bootstrap linker
(used to link the kernel and userland libraries and executables), while
GNU ld.bfd is still installed as /usr/bin/ld and used for ports builds.
The ports collection is essentially ready to use lld as the system
linker for amd64, but many ports still have trouble with lld on i386,
because lld defaults to -ztext, disallowing relocations against readonly
segments. Thus switching the system linker (WITH_LLD_IS_LD) will happen
later on a per-arch basis.
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
For some time we have been planning to migrate to LLVM's lld linker.
Having a man page was the last blocking issue for using ld.lld to link
the base system kernel + userland, now addressed by r327770. Link the
kernel and userland libraries and binaries with ld.lld by default, for
additional test coverage.
This has been a long time in the making. On 2013-04-13 I submitted an
upstream tracking issue in LLVM PR 23214: [META] Using LLD as FreeBSD's
system linker. Since then 85 individual issues were identified, and
submitted as dependencies. These have been addressed along with two
and a half years of other lld development and improvement.
I'd like to express deep gratitude to upstream lld developers Rui
Ueyama, Rafael Espindola, George Rimar and Davide Italiano. They put in
substantial effort in addressing the issues we found affecting
FreeBSD/amd64.
To revert to using ld.bfd as the bootstrap linker, in /etc/src.conf set
WITHOUT_LLD_BOOTSTRAP=yes
If you need to set this, please follow up with a PR or post to the
freebsd-toolchain mailing list explaining how default WITH_LLD_BOOTSTRAP
failed for your use case.
Note that GNU ld.bfd is still installed as /usr/bin/ld, and will still
be used for linking ports. ld.lld can be installed as /usr/bin/ld by
setting in /etc/src.conf
WITH_LLD_IS_LLD=yes
A followup commit will set WITH_LLD_IS_LD by default, possibly after
Clang/LLVM/lld 6.0 is merged to FreeBSD.
Release notes: Yes
Sponsored by: The FreeBSD Foundation
new clang 6.0.0 -Wtautological-constant-compare warning to the WARNS <=
6 level. (This warning is still being worked on upstream to reduce
false positives, but it is currently still too trigger happy.)
temporary workaround. This fixes zfs booting generally, but breaks all
GELI booting by default. Add note to UPDATING to this effect. When the
GELI issues are resolved, this will be reverted.
Several checks assume .CURDIR is resolved, such as for determining RELDIR from
SRCTOP/.CURDIR. If -C is used then the path is no longer resolved like it was
before which is problematic for symlinked source trees. A similar change was
also made to ports post bmake-20170301.
This fixes 'make -C <symlinked path> buildworld' using the wrong OBJDIR.
Reported by: rstone
Sponsored by: Dell EMC
This will cause an error if the wanted OBJDIR is not writable. Previously it
would cause the files to generate to the source tree. This was too obscure and
things like buildworld really expect a proper OBJDIR layout.
Sponsored by: Dell EMC
This warning checks whether a constant is out of range of the integer
type. An example is `comparison of 'u_int' > 4294967295 is always false`
and in this case the warning makes sense.
However, when the type is a typedef that can be either 64 or 32 bits the
if condition is only tautological in some configurations so this should
not be a warning that fails the build.
Reviewed by: dim
Approved by: jhb (mentor)
Differential Revision: https://reviews.freebsd.org/D12912
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
Commit these apart because compile testing doesn't guarantee I didn't made
some nasty mistake. No functional change intended.
This also makes it so that top-level build targets do not immediately create
the OBJDIR. Only sub-make targets will do so. This avoids creating object
directories for targets like 'make check-old' or creating unneeded
MACHINE.MACHINE_ARCH directories during 'make tinderbox'.
Reported by: npn, lifanov
Tested by: npn, Mark Millard
Sponsored by: Dell
This will allow disabling some things like AUTO_OBJ early if not needed for the
directory/targets, without putting special logic into share/mk/*.sys.mk.
Sponsored by: Dell
