The arm and arm64 implementations of dispatching IPIs via PIC_IPI_SEND
are almost identical, and entirely MI with the lone exception of a
single store barrier on arm64 (that is likely either redundant or needed
on arm too). Thus, de-duplicate this code by moving it to INTRNG as a
generic IPI glue framework. The ipi_* functions remain declared in MD
smp.h headers and implemented in MD code, but are trivial wrappers
around intr_ipi_send that could be made MI, at least for INTRNG ports,
at a later date.
Note that, whilst both arm and arm64 had an ii_send member in intr_ipi
to abstract over how to send interrupts,, they were always ultimately
using PIC_IPI_SEND, and so this complexity has been removed. A follow-up
commit will re-introduce the same flexibility by instead allowing a
device other than the root PIC to be registered as the IPI sender.
As part of this, strengthen a MAXCPU assertion that was missed in commit
2f0b059eea ("intrng: switch from MAXCPU to mp_ncpus") (which itself is
mis-titled).
Reviewed by: mmel, mhorne
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D35898
The static irq_root_ipicount variable is only ever written to (with the
value passed to irq_root_ipicount), never read. Moreover, the bcm2836
driver, as used by the Raspberry Pi 2B and 3A/B (but not 4, which uses a
GIC-400, though does have the legacy interrupt controller present too)
passes 0 as ipicount, despite implementing IPIs. It's thus inaccurate
and serves no purpose, so should be removed.
Reviewed by: mmel, imp, mhorne
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D35897
- Implement bus_get_rman pulling bits from nexus_alloc_resource.
- Implement bus_map/unmap_resource pulling bits from
nexus_activate/deactivate_resource.
- Use bus_generic_rman_* for
bus_alloc/adjust/activate/deactivate/release_resource except for
custom interrupt activate/deactivate logic still in
nexus_activate/deactivate_resource.
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D43437
The default hook does nothing, so having an empty handler is pointless.
Simple cleanup.
Reviewed by: markj
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D40475
In 9750d9e5, I brought the equivalent of the TS_BUSY flag back in a
mostly hardware-agnostic way in order to fix tty_drain() and, thus,
TIOCDRAIN for UARTs with TX FIFOs. This proved to be sufficient for
fixing the regression reported. So in light of the release cycle of
FreeBSD 10.3, I decided that this change was be good enough for the
time being and opted to go with the smallest possible yet generic
(for all UARTs driven by uart(4)) solution addressing the problem at
hand.
However, at least for the NS8250-class the above isn't a complete
fix as these UARTs only trigger an interrupt when the TX FIFO became
empty. At this point, there still can be an outstanding character
left in the transmit shift register as indicated via the LSR. Thus,
this change adds the 3rd (besides the tty(4) and generic uart(4) bits)
part I had in my tree ever since, adding a uart_txbusy method to be
queried in addition for tsw_busy and hooking it up as appropriate
for the NS8250-class.
As it turns out, the exact equivalent of this 3rd part later on was
implemented for uftdi(4) in 9ad221a5.
While at it, explain the rational behind the deliberately missing
locking in uart_tty_busy() (also applying to the generic sc_txbusy
testing already present).
We've removed kernel option EXT_RESOURCES almost two years ago.
While it was ok to have some code under a common 'extres' subdirectory
at first, we now have a lot of consumer of it and we made it mandatory
so no need to have it under a cryptic name.
Reviewed by: mhorne
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D43196
We've removed kernel option EXT_RESOURCES almost two years ago.
While it was ok to have some code under a common 'extres' subdirectory
at first, we now have a lot of consumer of it and we made it mandatory
so no need to have it under a cryptic name.
Reviewed by: emaste, imp
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D43195
We've removed kernel option EXT_RESOURCES almost two years ago.
While it was ok to have some code under a common 'extres' subdirectory
at first, we now have a lot of consumer of it and we made it mandatory
so no need to have it under a cryptic name.
Reviewed by: emaste, imp
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D43194
We've removed kernel option EXT_RESOURCES almost two years ago.
While it was ok to have some code under a common 'extres' subdirectory
at first, we now have a lot of consumer of it and we made it mandatory
so no need to have it under a cryptic name.
Reviewed by: dab, imp
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D43193
We've removed kernel option EXT_RESOURCES almost two years ago.
While it was ok to have some code under a common 'extres' subdirectory
at first, we now have a lot of consumer of it and we made it mandatory
so no need to have it under a cryptic name.
Reviewed by: imp
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D43192
We've removed kernel option EXT_RESOURCES almost two years ago.
While it was ok to have some code under a common 'extres' subdirectory
at first, we now have a lot of consumer of it and we made it mandatory
so no need to have it under a cryptic name.
Reviewed by: mhorne
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D43191
dwc3 is big enough to have its own subdirectory.
While here only make it depend on kernel option dwc3 and rk_dwc3
without any SOC options.
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D43190
No need to keep it under sys/arm64/rockchip/clk
It's easier to find which controller we support by looking under one directory.
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D43189
No need to keep it under sys/arm/allwinner/clkng
It's easier to find which controller we support by looking under one directory.
It will also be shared with Allwinner RiscV SoC.
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D43188
No need to keep it under sys/arm/allwinner
It's easier to find which controller we support by looking under one directory.
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D43187
No need to keep it under sys/arm64/rockchip
It's easier to find which controller we support by looking under one directory.
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D43186
No need to keep it under sys/arm/allwinner
It's easier to find which controller we support by looking under one directory.
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D43185
No need to keep it under sys/arm64/rockchip
It's easier to find which controller we support by looking under one directory.
While here remove the condition on SOC option, device rk_i2c is enough as all
Rockchip SoC that we support have this controller.
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D43184
On some platforms this static information can be derived directly from
the CPU, and there doesn't seem much use in restricting it.
Reviewed by: emaste, imp, kib
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D43281
Some implementations copy data to userspace, an operation which can in
principle fail. In preparation for adding a __result_use_check
annotation to copyin() and related functions, let implementations of
cpu_set_upcall() return an error, and check for errors when copying data
to user memory.
Reviewed by: kib, jhb
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D43100
- Change vm_page_reclaim_contig[_domain] to return an errno instead
of a boolean. 0 indicates a successful reclaim, ENOMEM indicates
lack of available memory to reclaim, with any other error (currently
only ERANGE) indicating that reclamation is impossible for the
specified address range. Change all callers to only follow
up with vm_page_wait* in the ENOMEM case.
- Introduce vm_domainset_iter_ignore(), which marks the specified
domain as unavailable for further use by the iterator. Use this
function to ignore domains that can't possibly satisfy a physical
allocation request. Since WAITOK allocations run the iterators
repeatedly, this avoids the possibility of infinitely spinning
in domain iteration if no available domain can satisfy the
allocation request.
PR: 274252
Reported by: kevans
Tested by: kevans
Reviewed by: markj
Differential Revision: https://reviews.freebsd.org/D42706
The VFP code expects the kernel to boot with VFP disabled, but some
boards will boot with it enabled. Make sure that vfp_init() disables
the VFP on each CPU during boot.
PR: 273752
Reviewed by: andrew
Diagnosed by: Thomas Skibo <thomas-bsd@skibo.net>
MFC after: 1 week
vfp_bounce() is called when handling an undefined instruction exception,
to see if we need to enable the VFP. Previously it would
unconditionally panic if the exception came from the kernel, which was
simply wrong, and it did not permit lazy initialization of VFP state in
the kernel. However, this functionality can be useful and is supported
by arm's fpu_kern_enter() implementation. Thus, relax assertions and
consume the exception if the thread was in an FPU section.
Based on a patch from Stormshield.
Reviewed by: andrew
MFC after: 2 weeks
Sponsored by: Klara, Inc.
Sponsored by: Stormshield
Differential Revision: https://reviews.freebsd.org/D42971
Only panic if no undefined instruction handler matched the exception.
This can arise in practice if the VFP is enabled lazily.
While here, fix the panic string to not include a newline.
Reviewed by: andrew
Obtained from: Stormshield
Sponsored by: Klara, Inc.
Sponsored by: Stormshield
Differential Revision: https://reviews.freebsd.org/D42970
This enables the use of some out-of-tree crypto libraries on arm.
No functional change intended, there are no callers of this function in
the tree currently.
Reviewed by: andrew
MFC after: 1 week
Sponsored by: Klara, Inc.
Sponsored by: Stormshield
Differential Revision: https://reviews.freebsd.org/D42969
After removing filter functionality, the naming doesn't clearly
represent what the function does, so try to address this. Include some
code clarity and style improvements.
Create a common version in subr_busdma_bounce.c, used by most
implementations. powerpc still needs its own version of the function,
due to its dmat->iommu == NULL check.
No functional change intended.
Reviewed by: jhb
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D42896
Without filter functions, we do not need to keep track of tag ancestry.
All inheritance of the parent tag's parameters occurs when creating the
new child tag.
Reviewed by: jhb
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D42895
Address filter functions are unused, unsupported, and now rejected.
Simplify some busdma code by removing filter functionality completely.
Note that the chains of parent tags become useless, and will be cleaned
up in the next commit.
No functional change intended.
Reviewed by: jhb
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D42894
A deprecation notice was added to the bus_dma(9) man page by scottl@ in
September 2020 discouraging the use of filter functions. I've performed
an attentive check of all callers in the tree and everything that exists
today passes NULL for both filtfunc and filtarg. Thus, we should start
returning EINVAL if these arguments are non-NULL to prevent new usages
from popping up. Update the man page to be more clear about this.
The deprecation notice is present since at least 13.0-RELEASE, so this
is the appropriate step for the lifetime of 15, without actually
breaking the driver API. Stable branches will emit a warning instead.
This change enables the removal of a fair amount of unused complexity
across the various busdma implementations.
Reviewed by: jhb
MFC after: never
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D42852
Apply the following automated changes to try to eliminate
no-longer-needed sys/cdefs.h includes as well as now-empty
blank lines in a row.
Remove /^#if.*\n#endif.*\n#include\s+<sys/cdefs.h>.*\n/
Remove /\n+#include\s+<sys/cdefs.h>.*\n+#if.*\n#endif.*\n+/
Remove /\n+#if.*\n#endif.*\n+/
Remove /^#if.*\n#endif.*\n/
Remove /\n+#include\s+<sys/cdefs.h>\n#include\s+<sys/types.h>/
Remove /\n+#include\s+<sys/cdefs.h>\n#include\s+<sys/param.h>/
Remove /\n+#include\s+<sys/cdefs.h>\n#include\s+<sys/capsicum.h>/
Sponsored by: Netflix
Remove ancient SCCS tags from the tree, automated scripting, with two
minor fixup to keep things compiling. All the common forms in the tree
were removed with a perl script.
Sponsored by: Netflix
Summary:
3c08673438 brought in SPI_FLAG_KEEP_CS to keep the SPI chip select held
post-transfer completion. Add this support to bcm2835 SPI for SPI
devices that need it. As part of this, the owner thread needed carried
through so that no other thread can take over the SPI bus until the
owner releases the chip select.
Reviewed by: manu
Sponsored by: Juniper Networks, Inc.
Differential Revision: https://reviews.freebsd.org/D42599
All of these used the 'immediately at beginning' variation of the
BSD-2-Clause license. This wasn't intentional, just what I copied from
from a random file in the tree back in 2005. It was not an intentional
decision.
The different arch bus.h files are a mix of BSD-2-Clause and
BSD-4-Clause that have various copyright holders (Charles M. Hannum,
Christopher G. Demetriou, The NetBSD Foundation and KATO Takenori), and
some of the content of these files were likely copied from there.
However, apart from the uncopyrightable interface lines, there are very
few comments. It's unclear if these comments are 'original material'
here to copyright, but to the extent that there is, license it under the
standard BSD-2-Clause copyright that's the norm for the project today.
In any event, the standard BSD-2-Clause is also closer to those
originals.
In addition, FreeBSD uses different type definitions than the original
NetBSD code in part. The comments that were copied have been copied a
lot, but appear in NetBSD's bus.h files in NetBSD 1.3.
While I'm here, assign the copyright, to the extent any exists from me,
to the FreeBSD Foundation. I just cut and pasted these into _bus.h from
the different machine files and those files have a rich history of
modification from the original imports from NetBSD over more than 25
years so it's tricky to say who, exactly, wrote each bit. Given the size
of the files, this seems like the best compromise. Also add an
acknowledgement to the NetBSD 1.3 bus.h files and their authors (there
were no additional FreeBSD authors listed in the various
sys/*/include/bus.h files). Finally, use the SPDX identifier instead of
multiple copies of the text.
Differential Revision: https://reviews.freebsd.org/D42532
Sponsored by: Netflix
In uma_set_align_mask(), ensure that the passed value doesn't have its
highest bit set, which would lead to problems since keg/zone alignment
is internally stored as signed integers. Such big values do not make
sense anyway and indicate some programming error. A future commit will
introduce checks for this case and other ones.
Reviewed by: kib, markj
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D42262
There's no point in setting 'arm_dcache_align_mask' before the
function's end.
Reviewed by: markj, kib
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D42261
Create the uma_get_cache_align_mask() accessor and put it in a separate
private header so as to minimize namespace pollution in header/source
files that need only this function and not the whole 'uma.h' header.
Make sure the accessors have '_mask' as a suffix, so that callers are
aware that the real alignment is the power of two that is the mask plus
one. Rename the stem to something more explicit. Rename
uma_set_cache_align_mask()'s single parameter to 'mask'.
Hide 'uma_align_cache' to ensure that it cannot be set in any other way
then by a call to uma_set_cache_align_mask(), which will perform sanity
checks in a further commit. While here, rename it to
'uma_cache_align_mask'.
This is also in preparation for some further changes, such as improving
the sanity checks, eliminating internal resolving of UMA_ALIGN_CACHE and
changing the type of the 'uma_cache_align_mask' variable.
Reviewed by: markj, kib
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D42258
The IMX5 configs were removed in advance of FreeBSD 14.0 in
cdb0c2a73d ("arm: Remove IMX5 specific kernel configs"). This code
isn't built with GENERIC and doesn't actually build today as-is, so
let's remove it to avoid needless maintenance work to it that won't be
tested. As usual, revival is welcome with a committed user and work to
maintain it with upstream DTS and, ideally, in GENERIC.
I note that vt_early_fb is now effectively orphaned as nothing else will
use it, but I haven't yet removed it since I have not done anything to
ascertain if it could be integrated easily enough for other SoC. It is
among the files that doesn't actually build with today's clang, though.
Reviewed by: imp, manu
Differential Revision: https://reviews.freebsd.org/D41836
The sysctl knob 'vm.pmap.pv_entry_max' becomes a loader tunable since
7ff48af704 (Allow a specific setting for pv entries) but is fetched
from system environment 'vm.pmap.pv_entries'. That is inconsistent and
obscure.
This reverts 36e1b9702e (Correct the tunable name in the message).
PR: 231577
Reviewed by: jhibbits, alc, kib
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D42274
Make sure that we don't try to copy with a negative resid.
Make sure that we don't walk off the end of the iovec array.
Reviewed by: kib
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D42098
Use it wherever COMPAT_FREEBSD13 is currently specified.
Reviewed by: brooks, zlei
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D42100
It makes it easier to find all the sub drivers and change them if needed.
While here do not gate dwc_rk with soc options, dwc_rk is made for all rockchip
SoCs. Same thing for dwc_socfpga
The folder is a mess so start moving stuff into sub-directories.
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D41907
to allow ABIs to indicate that SIGSYS is needed. Mark all native
FreeBSD ABIs with the flag.
This implicitly marks Linux' ABIs as not delivering SIGSYS on invalid
syscall.
Reviewed by: dchagin, markj
Discussed with: jhb
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D41976
In particular, when the syscall number is too large, or when syscall is
dynamic. For that, add nosys_sysent structure to pass fake sysent to
syscall top code.
Reviewed by: dchagin, markj
Discussed with: jhb
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D41976
madt_table_data contains an array of pointers for each CPU and was
allocated on the stack. If MAXCPU is raised to a sufficiently large
value this can overflow the kernel stack. Cap the stack growth by
using GIC_MAXCPU instead as for other parts of the gicv1/v2 driver in
commit a0e20c0ded.
Suggested by: andrew
Reviewed by: andrew, emaste
Obtained from: CheriBSD
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D41800
We currently use the same Arm generic time in both userspace and the
kernel. As we always enable userspace access to the virtual timer we
can tell userspace to use it.
Reviewed by: imp
Sponsored by: Arm Ltd
Differential Revision: https://reviews.freebsd.org/D41565
Summary:
These came in the original DrvAPI commits in 2014, and are obsoleted by
bpf_mtap_if() and ether_bpf_mtap_if(). The `_if` suffix, rather than
prefix, conveys that it's operating on the bpf of the interface, instead
than the interface itself.
Reviewed by: glebius
Sponsored by: Juniper Networks, Inc.
Differential Revision: https://reviews.freebsd.org/D41146
For amd64, i386, arm, and riscv, i.e. all architectures except arm64,
the custom implementation is provided since we maintain the bitmask of
active CPUs anyway.
Arm64 uses somewhat naive iteration over CPUs and match current vmspace'
pmap with the argument. It is not guaranteed that vmspace->pmap is the
same as the active pmap, but the inaccuracy should be toleratable.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D32360
This target produces a C file not an object file, so using ctfconvert on
it should not be attempted. This keeps it in sync with all other uses of
fw_stub.awk, squashes a warning seen during the build of TEGRA124 on
FreeBSD and avoids the same issue failing the build on non-FreeBSD (such
errors are #ifdef'ed into being warnings on FreeBSD in ctfconvert, which
should be revisited in the future).
Reviewed by: manu
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D41542
Add support for the gpio controller found in the ZynqMP SoC.
The registers are the same as the Zynq 7000, just the number of
banks/pins per banks differs.
Sponsored by: Beckhoff Automation GmbH & Co. KG
MFC after: 2 weeks
All other Zynq SoCs have the same GPIO controller, the only difference
is the number of banks/pins so make this driver more generic to add
other SoCs more easily.
No functional changes intended.
Sponsored by: Beckhoff Automation GmbH & Co. KG
MFC after: 2 weeks
Following the removal of general MIPS support, there's no longer a need
to have the AHB bus-frontend in place, which according to Linux sources
also isn't used with any non-MIPS SoCs. For simplicity, PCI bus support
is only made conditional on the main one again, i. e. device ath_pci is
removed, and built into the main module, i. e. if_ath_pci.ko obsoleted,
respectively.
Effectively, this reverts the following commits and associated changes:
dba9c85977e849bb3ecb
Approved by: adrian
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D41354
The GICv2 can only send IPIs to 8 CPUs. Because of this it should only
be in machines with no more than 8 cores.
Create a new macro to hold this limit to reduce the size of the softc.
Reviewed by: emaste
Sponsored by: Arm Ltd
Differential Revision: https://reviews.freebsd.org/D41322
If the unwinder somehow ends up with a stack pointer that lies outside
the stack, then an attempt to dereference can lead to a fault, which
causes the kernel to panic again and unwind the stack, which leads to a
fault...
Add kstack_contains() checks at points where we dereference the stack
pointer. This avoids the aforementioned infinite loop in one case I hit
where some OpenSSL assembly code apparently confuses the unwinder.
Reviewed by: jhb
MFC after: 2 weeks
Sponsored by: Klara, Inc.
Sponsored by: Stormshield
Differential Revision: https://reviews.freebsd.org/D41210
There is no need for this to be versioned after the removal of armv4/v5
Sponsored by: Arm Ltd
Differential Revision: https://reviews.freebsd.org/D41139
Previously we had an armv4/v5 and armv6/v7 copy of the pmap header. As
we have removed armv4/v5 support we can now merge the armv6/v7 code
into pmap.h
Reviewed by: imp
Sponsored by: Arm Ltd
Differential Revision: https://reviews.freebsd.org/D41138
Previously we had an armv4/v5 and armv6/v7 copy of the cpu.h header. As
we have removed armv4/v5 support we can now merge the armv6/v7 code
into cpu.h
Reviewed by: imp
Sponsored by: Arm Ltd
Differential Revision: https://reviews.freebsd.org/D41137
Previously we had an armv4/v5 and armv6/v7 implementation of the atomic
operations. As we have removed armv4/v5 support we can now merge the
armv6/v7 code into atomic.h
Reviewed by: imp
Sponsored by: Arm Ltd
Differential Revision: https://reviews.freebsd.org/D41135
These includes were added for armv4 and armv5 support. Remove them as
this has been removed from the tree.
Sponsored by: Arm Ltd
Differential Revision: https://reviews.freebsd.org/D41133
Use of compiler builtin ffs/ctz functions will result in optimized
instruction sequences when possible, and fall back to calling a function
provided by the compiler run-time library. We have slowly shifted our
platforms to take advantage of these builtins in 60645781d6 (arm64),
1c76d3a9fb (arm), 9e319462a0 (powerpc, partial).
Some platforms still rely on the libkern implementations of these
functions provided by libkern, namely riscv, powerpc (ffs*, flsll), and
i386 (ffsll and flsll). These routines are slow, as they perform a
linear search for the bit in question. Even on platforms lacking
dedicated bit-search instructions, such as riscv, the compiler library
will provide better-optimized routines, e.g. by using binary search.
Consolidate all definitions of these functions (whether currently using
builtins or not) to libkern.h. This should result in equivalent or
better performing routines in all cases.
One wart in all of this is the existing HAVE_INLINE_F*** macros, which
we use in a few places to conditionally avoid the slow libkern routines.
These aren't easily removed in one commit. For now, provide these
defines unconditionally, but marked for removal after subsequent
cleanup.
Removal of the now unused libkern routines will follow in the next
commit.
Reviewed by: dougm, imp (previous version)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D40698
Add support for GPIO internal pull up/down configuration on RPi4 family.
BCM2711 SoC on 4th generation Raspberry Pi changed the way to configure
its GPIO pins' internal pull up/down resistors. NetBSD already have
support for this change, and port it to FreeBSD is trivial.
This patch, based on the NetBSD commit adds the appropriate method for
BCM2711 and now we can properly configure the GPIO pins' pull status.
PR: 256372
Reviewed by: mhorne
Obtained from: NetBSD bb88cfa64ad8
Pull Request: https://github.com/freebsd/freebsd-src/pull/746
The sysentvec sv_imgact_try was used by kern_exec() to allow
non-native ABI to fixup shell path according to ABI root directory.
Since the non-native ABI can now specify its root directory directly
to namei() via pwd_altroot() call this facility is not needed anymore.
Differential Revision: https://reviews.freebsd.org/D40092
MFC after: 2 month
The Barndinfo emul_path was used by the Elf image activator to fixup
interpreter file name according to ABI root directory. Since the
non-native ABI can now specify its root directory directly to namei()
via pwd_altroot() call this facility is not needed anymore.
Differential Revision: https://reviews.freebsd.org/D40091
MFC after: 2 month
This avoids bloating the kernel image when MAXCPU is large.
A follow-up patch for kgdb and other kernel debuggers is needed since
the stoppcbs symbol is now a pointer. Bump __FreeBSD_version so that
debuggers can use osreldate to figure out how to handle stoppcbs.
PR: 269572
MFC after: never
Reviewed by: mjg, emaste
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D39806
After removing the -FreeBSD and -NetBSD, we're left with a nuber of
BSD-2-Clause AND BSD-2-Clause, so tidy that up.
Discussed with: pfg
MFC After: 3 days
Sponsored by: Netflix
The SPDX folks have obsoleted the BSD-2-Clause-NetBSD identifier. Catch
up to that fact and revert to their recommended match of BSD-2-Clause.
Discussed with: pfg
MFC After: 3 days
Sponsored by: Netflix
The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch
up to that fact and revert to their recommended match of BSD-2-Clause.
Discussed with: pfg
MFC After: 3 days
Sponsored by: Netflix
This existing helper function is preferable to the hand-rolled
calculation of the kstack bounds.
Make some small style improvements while here. Notably, rename every
instance of "r", the return address, to "ra". Tidy the includes in the
affected files.
Reviewed by: jkoshy
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D39909
TI support is in a sad state for years.
We haven't been able to keep up with all the breaking changes that
upstream do in the DTS. This requires a lot of new drivers to handle the
new buses that they create and all the new clocks that they expose.
Keep the code for now in case somebody is interested in reviving this
platform but stop bloating GENERIC with code that don't work.
Reviewed by: imp, mmel
MFC after: never
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D39843
There is now assertion which requires all memory allocations of positive size.
Negative and zero-sized allocations lead to panic, so plug them off.
Reviewed by: imp, emaste
Differential Revision: https://reviews.freebsd.org/D39846
This was needed before INTRNG was in place and handling the push of
curthread->td_intr_frame. Since INTRNG now handles this, there is no
longer and need for playing around with the frame inside IPI interrupts.
This was needed when intr_ipi_dispatch() was called by hardware-specific
IPI interrupt routines which didn't save the trap frame. Now all ARM
interrupts pass through INTRNG which will have already saved the trap
frame and disabled preemption.
Remove the conditional trapframe/argument passing to the handlers.
Reviewed by: andrew
Differential Revision: https://reviews.freebsd.org/D37938