about the parent USB device:
- libusb20_dev_get_parent_address
- libusb20_dev_get_parent_port
- Rename libusb20_compat01.c into libusb01.c
MFC after: 3 days
is now required by bus_autoconf.
- Allow interface class matching even if device class is vendor specific.
- Update bus_autoconf tool to not generate system and subsystem match lines
for the nomatch event.
PR: misc/157903
MFC after: 14 days
(1) Coding style changes.
(2) If the server does not acknowledge any blocksize option,
revert to the default blocksize of 512 bytes.
(3) Send ACK if the first packet happens to be the last packet.
(4) Do not accept blocksize greater than what was requested.
(5) Drop any unwanted OACK received if a tftp transfer is already
in progress.
(6) Terminate incomplete transfers with a special no-error ERROR packet.
Otherwise we rely on the tftp server to time out, which it does
eventually, after re-sending the last packet several times and spamming
the system log about it every time. This idea is borrowed from the
PXE client, which does exactly that.
Submitted by: Alexander Kabaev <kan@FreeBSD.org>
Reviewed and Tested by: Santhanakrishnan Balraj <sbalraj at juniper dot net>
tftp implementation. The synchnet() function
was converted to a no-op when the new TFTP implementation
was committed to FreeBSD. However, this function, as it was
in the older code, is needed
in order to synchronize between the tftpd server and tftp clients,
which may be buggy.
Specifically, we had a buggy TFTP client which would send
TFTP ACK packets for non-TFTP packets, which would cause
the count of packets to get out of whack, causing transfers
to fail with the new TFTPD implementation.
Obtained from: Juniper Networks
Submitted by: Santhanakrishnan Balraj <sbalraj at juniper dot net>
sorted according to the mode which they support:
host, device or dual mode
- Add generic tool to extract these data:
tools/bus_autoconf
Discussed with: imp
Suggested by: Robert Millan <rmh@debian.org>
PR: misc/157903
MFC after: 14 days
instead of a PCPU field for curthread. This averts a race on SMP systems
with a high interrupt rate where the thread looking up the value of
curthread could be preempted and migrated between obtaining the PCPU
pointer and reading the value of pc_curthread, resulting in curthread being
observed to be the current thread on the thread's original CPU. This played
merry havoc with the system, in particular with mutexes. Many thanks to
jhb for helping me work this one out.
Note that Book-E is in principle susceptible to the same problem, but has
not been modified yet due to lack of Book-E hardware.
MFC after: 2 weeks
some interesting bugs (mostly on SMP systems) with atomic operations
silently failing in interrupt heavy situations, especially when using
overflow pages.
switch the region registers. pmap_switch() returns the pmap for
which the region register are currently programmed, which needs
to be re-programmed on the CPU the ougoing thread gets switched
in. This change does not noticibly change anything or fix known
bugs, but does give me a warm fuzzy feeling by being more
correct.
unhappy (probably they don't handle crossing the 64k boundary, etc.).
Fix this by changing zfsldr to use a loop reading from the disk one
sector at a time. To avoid trashing the saved copy of the MBR which is
used for disk I/O, read zfsboot2 at address 0x9000. This has the
advantage that BTX no longer needs to be relocated as it is read into
the correct location. However, the loop to relocate zfsboot2.bin can
now cross a 64k boundary, so change it to use relative segments instead.
(This will need further work if zfsboot2.bin ever exceeds 64k.)
While here, stop storing a relocated copy of zfsldr at 0x700. This was
only used by the xread hack which has recently been removed (and even
that use was dubious). Also, include the BIOS error code as hex when
reporting read errors to aid in debugging.
Much thanks to Henri Hennebert for patiently testing various iterations
of the patch as well as fixing the zfsboot2.bin relocation to use
relative segments.
MFC after: 1 week
to do about the few cases where the HAL state isn't available (regdomain)
or isn't yet setup (probe/attach.)
The global ath_hal_debug now affects all instances of the HAL.
This also restores the ability for probe/attach debugging to work; as
the sysctl tree may not be attached at that point. Users can just set
the global "hw.ath.hal.debug" to a suitable value to enable probe/attach
related debugging.
(obvious in retrospect) in which interrupts on one CPU that are temporarily
masked can end up permanently masked when a handler on another CPU clobbers
the interrupt mask register with an old copy.
rather than global variables.
This specifically allows for debugging to be enabled per-NIC, rather
than globally.
Since the ath driver doesn't know about AH_DEBUG, and to keep the ABI
consistent regardless of whether AH_DEBUG is enabled or not, enable the
debug parameter always but only conditionally compile in the debug
methods if needed.
The ALQ support is currently still global pending some brainstorming.
Submitted by: ssgriffonuser@gmail.com
Reviewed by: adrian, bschmidt
This was previously done only for SCSI XPT in r223081, on which the change
in r223089 depended in order to respond to serial number requests. As a
result of r223089, da(4) and ada(4) devices register a d_getattr for geom to
use to obtain the information.
Reported by: ache
Reviewed by: ken
